Solo4k im Smargo kein Tivosat mit Oscam

[firstfacility]

Hallo Forum,
ich versuche schon seit einiger Zeit auf meiner Solo4K eine Tivosat Karte zum laufen zu bringen, doch leider ohne Erfolg:
Log

Spoiler

[/code]

• 2017/02/18 16:24:27 7A8A49BE r (reader) Tivu [smargo] ATR: 3F FF 95 00 FF xxxxxxxxxxxxxxxxxxxx

• 2017/02/18 16:24:27 7A8A49BE r (reader) Tivu [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/02/18 16:24:27 7A8A49BE r (reader) Tivu [smargo] Calculated work ETU is 69.66 us reader mhz = 534

• 2017/02/18 16:24:27 7A8A49BE r (reader) Tivu [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

• 2017/02/18 16:24:29 7A8A49BE r (reader) Tivu [smargo] Warning: Card returned error on setting ifsd value to 28

• 2017/02/18 16:24:30 7A8A49BE r (reader) Tivu [smargo] detect nagra tiger card

• 2017/02/18 16:24:31 7A8A49BE r (reader) Tivu [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

• 2017/02/18 16:24:32 7A8A49BE r (reader) Tivu [smargo] T1 Resync command error, trying to reactivate!

• 2017/02/18 16:24:37 7A8A49BE r (reader) Tivu [smargo] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 54 49 47 45 52 36 30 31 20 52 65 76 4D 38 37 14

• 2017/02/18 16:24:37 7A8A49BE r (reader) Tivu [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255

• 2017/02/18 16:24:37 7A8A49BE r (reader) Tivu [smargo] Calculated work ETU is 5.99 us reader mhz = 534

• 2017/02/18 16:24:37 7A8A49BE r (reader) Tivu [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)

• 2017/02/18 16:24:37 7A8A49BE r (reader) Tivu [smargo] Card responded ok for ifsd request of 28

• 2017/02/18 16:24:37 7A8A49BE r (reader) Tivu [smargo] card system not supported

• 2017/02/18 16:24:37 7A8A49BE r (reader) Tivu [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

• 2017/02/18 16:24:37 7A8A49BE r (reader) Tivu [smargo] card initializing error

[/code]

Die Karte ist neu und laut Verkäufer auch aktiviert. Ich nutzte die Oscam r11355.
Meine oscam.Server schaut so aus :

Spoiler

[/code]
[reader]
label = Tivu
enable = 1
protocol = smargo
device = /dev/ttyUSB1
smargopatch = 1
caid = 183d
tiger_rsakey = A92............B5
tiger_ideakey = 37.............37
ecmwhitelist = 183d@1F1F1F:8C,B7
detect = cd
mhz = 534
cardmhz = 357
group = 7
emmcache = 1,3,2
[/code]

Hätte jemand einen Tipp für mich ?

Gruß
Frank

 

[Phantom]

Schau mal hier Oscam Reader TivuSat N3 Karte ????