- Registriert
- 8. Dezember 2009
- Beiträge
- 853
- Lösungen
- 2
- Reaktionspunkte
- 109
- Punkte
- 113
Hi,
Versuche jetzt schon den ganzen Mittag meine S02 mit Oscam und einem Smargo V2.
Das Ding macht mir die Karte nicht hell.
Meine config sind OK den die Karte funzt in einem Smargo 1.7 wunderbar
device = SRv2;Serial:Easy0007 # Smargo V2
device = Serial:12345678 #Smargo 1.7
soweit stimmt dann ja alles.
Wenn ich die OScam starte, findet er auch den SmargoV2. Im Webif kann man verfolgen wie dann rechts erst NEEDINIT kommt.
Nach einer Zeit ändert das auf ERROR (no entitlements)
Smargo steht auf AUTO
Weiss nicht mehr weiter
Hier noch die log
Versuche jetzt schon den ganzen Mittag meine S02 mit Oscam und einem Smargo V2.
Das Ding macht mir die Karte nicht hell.
Meine config sind OK den die Karte funzt in einem Smargo 1.7 wunderbar
device = SRv2;Serial:Easy0007 # Smargo V2
device = Serial:12345678 #Smargo 1.7
soweit stimmt dann ja alles.
Wenn ich die OScam starte, findet er auch den SmargoV2. Im Webif kann man verfolgen wie dann rechts erst NEEDINIT kommt.
Nach einer Zeit ändert das auf ERROR (no entitlements)
Smargo steht auf AUTO
Weiss nicht mehr weiter
Hier noch die log
014/02/25 21:43:43 8A30EB0 r S02 [smartreader] Creating smartreader thread.
2014/02/25 21:43:43 8A30EB0 r S02 [smartreader] clocking for smartreader with smartreader protocol
2014/02/25 21:43:43 8A30EB0 r S02 [smartreader] Reader initialized (device=SRv2;Serial:Easy0007, detect=cd, mhz= AUTO, cardmhz=600)
2014/02/25 21:43:43 8A30EB0 r S02 [smartreader] card detected
2014/02/25 21:43:43 8A30EB0 r S02 [smartreader] init card at 369 mhz
2014/02/25 21:43:49 8A349C0 c buro (1702&000000/0000/000B/93:7B087D9703C773176C93C2D95D056C48): rejected group (1 ms) - Sky Cinema +1 (no matching reader)
2014/02/25 21:43:50 8A349C0 c buro (1702&000000/0000/000B/93:2862E8C9BC52D37B56015E583F4895AF): rejected group (0 ms) - Sky Cinema +1 (no matching reader)
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] Calculated work ETU is 93.00 us reader mhz = 600
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] autospeed = 1
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] Effective reader settings mhz =600 F= 558 D= 1 N=0 T=14 inv=0 parity=NONE
2014/02/25 21:43:53 8A30EB0 r S02 [smartreader] ATR Fsmax is 6 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 6.00 MHz (specified in reader->mhz)
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] detect irdeto tunneled nagra card
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] no rsa key configured -> using irdeto mode
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] detect irdeto card
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] caid: 1702, acs: 3.84, country code: GER
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/02/25 21:44:05 8A30EB0 r S02 [smartreader] card system not supported
2014/02/25 21:44:05 8A30EB0 r S02 [smartreader] Normal mode failed, reverting to Deprecated Mode
2014/02/25 21:44:05 8A30EB0 r S02 [smartreader] init card at 369 mhz
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] autospeed = 1
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=14 inv=0 parity=NONE
2014/02/25 21:44:15 8A30EB0 r S02 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] detect irdeto tunneled nagra card
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] no rsa key configured -> using irdeto mode
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] detect irdeto card
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] caid: 1702, acs: 3.84, country code: GER
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/02/25 21:44:28 8A30EB0 r S02 [smartreader] card system not supported
2014/02/25 21:44:28 8A30EB0 r S02 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/02/25 21:44:28 8A30EB0 r S02 [smartreader] card initializing error
2014/02/25 21:43:43 8A30EB0 r S02 [smartreader] clocking for smartreader with smartreader protocol
2014/02/25 21:43:43 8A30EB0 r S02 [smartreader] Reader initialized (device=SRv2;Serial:Easy0007, detect=cd, mhz= AUTO, cardmhz=600)
2014/02/25 21:43:43 8A30EB0 r S02 [smartreader] card detected
2014/02/25 21:43:43 8A30EB0 r S02 [smartreader] init card at 369 mhz
2014/02/25 21:43:49 8A349C0 c buro (1702&000000/0000/000B/93:7B087D9703C773176C93C2D95D056C48): rejected group (1 ms) - Sky Cinema +1 (no matching reader)
2014/02/25 21:43:50 8A349C0 c buro (1702&000000/0000/000B/93:2862E8C9BC52D37B56015E583F4895AF): rejected group (0 ms) - Sky Cinema +1 (no matching reader)
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] Calculated work ETU is 93.00 us reader mhz = 600
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] autospeed = 1
2014/02/25 21:43:52 8A30EB0 r S02 [smartreader] Effective reader settings mhz =600 F= 558 D= 1 N=0 T=14 inv=0 parity=NONE
2014/02/25 21:43:53 8A30EB0 r S02 [smartreader] ATR Fsmax is 6 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 6.00 MHz (specified in reader->mhz)
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] detect irdeto tunneled nagra card
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] no rsa key configured -> using irdeto mode
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] detect irdeto card
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] caid: 1702, acs: 3.84, country code: GER
2014/02/25 21:43:54 8A30EB0 r S02 [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/02/25 21:44:05 8A30EB0 r S02 [smartreader] card system not supported
2014/02/25 21:44:05 8A30EB0 r S02 [smartreader] Normal mode failed, reverting to Deprecated Mode
2014/02/25 21:44:05 8A30EB0 r S02 [smartreader] init card at 369 mhz
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] autospeed = 1
2014/02/25 21:44:14 8A30EB0 r S02 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=0 T=14 inv=0 parity=NONE
2014/02/25 21:44:15 8A30EB0 r S02 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] detect irdeto tunneled nagra card
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] no rsa key configured -> using irdeto mode
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] detect irdeto card
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] caid: 1702, acs: 3.84, country code: GER
2014/02/25 21:44:16 8A30EB0 r S02 [smartreader] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2014/02/25 21:44:28 8A30EB0 r S02 [smartreader] card system not supported
2014/02/25 21:44:28 8A30EB0 r S02 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/02/25 21:44:28 8A30EB0 r S02 [smartreader] card initializing error