Hallo zusammen,
ich habe mir heute eine FritzBox 7390 gekauft und das Image "DEB_7390_05.05freetz-devel-7730.de" drauf gespielt mit folgenden Einstellungen unter OSCam.
oscam.conf
[global]
#logfile = /var/media/ftp/uStor01/oscam.log
clienttimeout = 7000
fallbacktimeout = 4000
bindwait = 5
nice = -5
maxlogsize = 0
waitforcards_extra_delay = 100
preferlocalcards = 1
saveinithistory = 1
lb_savepath =
lb_stat_cleanup = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[cs357x]
port = 12000
[webif]
httpport = 16000
httphelplang = de
httpcss = /var/media/ftp/uStor01//cs/oscam//proflinux_ddcstyle.css
httprefresh = 10
httpallowed = 192.168.178.1-192.168.178.255
oscam.server
[reader]
label = v13
description =
protocol = smartreader
device = Serial:Reader 4xxxxxx # richtige ID ist ausgegraut
services = skyall,!hdplusv13
showcls = 0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 500
ident = 09C4:000000
group = 1
Hier der Log:
2011/10/08 14:20:28 0 s >> OSCam << cardserver started, version 1.20 -DEB-Freetz--Prof.Linux- , build #5865 (mips-router-linux-uclibc929)
2011/10/08 14:20:28 0 s version=1.20 -DEB-Freetz--Prof.Linux- , build #5865, system=mips-router-linux, nice=-5
2011/10/08 14:20:28 0 s client max. idle=120 sec, debug level=0
2011/10/08 14:20:28 0 s max. logsize=unlimited, loghistorysize=4096 bytes
2011/10/08 14:20:28 0 s client timeout=7000 ms, fallback timeout=4000 ms, cache delay=0 ms
2011/10/08 14:20:28 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2011/10/08 14:20:28 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2011/10/08 14:20:28 0 s signal handling initialized (type=sysv)
2011/10/08 14:20:28 0 s 11590 service-id's loaded in 284ms
2011/10/08 14:20:28 0 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
2011/10/08 14:20:28 0 s HINT: --> use optimized lists from
2011/10/08 14:20:28 0 s 116 tier-id's loaded
2011/10/08 14:20:28 0 s 56 provid's loaded
2011/10/08 14:20:28 0 s 22 lengths for caid guessing loaded
2011/10/08 14:20:28 0 s monitor: disabled
2011/10/08 14:20:28 0 s camd35: initialized (fd=5, port=12000)
2011/10/08 14:20:28 0 s cs378x: disabled
2011/10/08 14:20:28 0 s newcamd: disabled
2011/10/08 14:20:28 0 s radegast: disabled
2011/10/08 14:20:28 6B6BC8 h HTTP Server listening on port 16000
2011/10/08 14:20:28 0 s http thread started
2011/10/08 14:20:28 0 s reader check thread started
2011/10/08 14:20:28 0 s check thread started
2011/10/08 14:20:28 0 s creating thread for device Serial:Reader 4xxxxxx
2011/10/08 14:20:28 6B82D0 r Using 0x82 as endpoint for smartreader hardware detection
2011/10/08 14:20:28 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/10/08 14:20:28 0 s waiting for local card init
Was mache ich falsch ??
Der Smargo leuchtet beim einstecken in das USB-Hub, aber sobald ich die V13 einstecken möchte geht die LED aus und blinkt nicht mehr.
Ich habe auf dem Samrgo die V1.5 mit folgender Einstellung:
Gruß und thx,
Andi
ich habe mir heute eine FritzBox 7390 gekauft und das Image "DEB_7390_05.05freetz-devel-7730.de" drauf gespielt mit folgenden Einstellungen unter OSCam.
oscam.conf
[global]
#logfile = /var/media/ftp/uStor01/oscam.log
clienttimeout = 7000
fallbacktimeout = 4000
bindwait = 5
nice = -5
maxlogsize = 0
waitforcards_extra_delay = 100
preferlocalcards = 1
saveinithistory = 1
lb_savepath =
lb_stat_cleanup = 1
[monitor]
hideclient_to = 15
appendchaninfo = 0
[cs357x]
port = 12000
[webif]
httpport = 16000
httphelplang = de
httpcss = /var/media/ftp/uStor01//cs/oscam//proflinux_ddcstyle.css
httprefresh = 10
httpallowed = 192.168.178.1-192.168.178.255
oscam.server
[reader]
label = v13
description =
protocol = smartreader
device = Serial:Reader 4xxxxxx # richtige ID ist ausgegraut
services = skyall,!hdplusv13
showcls = 0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 500
ident = 09C4:000000
group = 1
Hier der Log:
2011/10/08 14:20:28 0 s >> OSCam << cardserver started, version 1.20 -DEB-Freetz--Prof.Linux- , build #5865 (mips-router-linux-uclibc929)
2011/10/08 14:20:28 0 s version=1.20 -DEB-Freetz--Prof.Linux- , build #5865, system=mips-router-linux, nice=-5
2011/10/08 14:20:28 0 s client max. idle=120 sec, debug level=0
2011/10/08 14:20:28 0 s max. logsize=unlimited, loghistorysize=4096 bytes
2011/10/08 14:20:28 0 s client timeout=7000 ms, fallback timeout=4000 ms, cache delay=0 ms
2011/10/08 14:20:28 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2011/10/08 14:20:28 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2011/10/08 14:20:28 0 s signal handling initialized (type=sysv)
2011/10/08 14:20:28 0 s 11590 service-id's loaded in 284ms
2011/10/08 14:20:28 0 s WARNING: You risk high CPU load and high ECM times with more than 2000 service-id´s!
2011/10/08 14:20:28 0 s HINT: --> use optimized lists from
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
2011/10/08 14:20:28 0 s 116 tier-id's loaded
2011/10/08 14:20:28 0 s 56 provid's loaded
2011/10/08 14:20:28 0 s 22 lengths for caid guessing loaded
2011/10/08 14:20:28 0 s monitor: disabled
2011/10/08 14:20:28 0 s camd35: initialized (fd=5, port=12000)
2011/10/08 14:20:28 0 s cs378x: disabled
2011/10/08 14:20:28 0 s newcamd: disabled
2011/10/08 14:20:28 0 s radegast: disabled
2011/10/08 14:20:28 6B6BC8 h HTTP Server listening on port 16000
2011/10/08 14:20:28 0 s http thread started
2011/10/08 14:20:28 0 s reader check thread started
2011/10/08 14:20:28 0 s check thread started
2011/10/08 14:20:28 0 s creating thread for device Serial:Reader 4xxxxxx
2011/10/08 14:20:28 6B82D0 r Using 0x82 as endpoint for smartreader hardware detection
2011/10/08 14:20:28 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/10/08 14:20:28 0 s waiting for local card init
Was mache ich falsch ??
Der Smargo leuchtet beim einstecken in das USB-Hub, aber sobald ich die V13 einstecken möchte geht die LED aus und blinkt nicht mehr.
Ich habe auf dem Samrgo die V1.5 mit folgender Einstellung:
Auto |
Normal |
T=0 |
0 |
Gruß und thx,
Andi