Sky V14 Wird nicht hell

[djdolla]

Hallo zusammen,
hab heute meine Smartcard incl Receiver bekommen, aber bekomme das Ding nicht zum laufen.

Ich benutze eine DM7020HD. Folgende OSCAM version verwende ich:
OSCAM: 1.20-unstable_svn Build: r788 Compiler: mipsel-newnigma2-linux-gnu

Meine config sieht wie folgt aus

oscam.conf

Spoiler

[global]
logfile = /var/log/oscam/oscam.log
maxlogsize = 5000
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
emmlogdir = /var/log/oscam


[cache]


[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox


[webif]
httpport = 83
httpuser = user
httppwd = pass
httprefresh = 7
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

oscam.user

Spoiler

[account]
user = lokal
au = V14
group = 1

oscam.server

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
ndsversion = 2
mhz = 1
cardmhz = 2700

oscam.dvbapi

Spoiler

P:098C 1
I:0

Logfile vom Start:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Feb 13 17:40:34 2015
-------------------------------------------------------------------------------
2015/02/13 17:40:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2015/02/13 17:40:34 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1281
2015/02/13 17:40:34 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/02/13 17:40:34 0 s signal handling initialized
2015/02/13 17:40:34 0 s V14 [internal] creating thread for device /dev/sci0
2015/02/13 17:40:34 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/13 17:40:34 0 s waiting for local card init
2015/02/13 17:40:34 76D00588 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2015/02/13 17:40:34 C76720 h webif: decompressed 69662 bytes back into 195704 bytes
2015/02/13 17:40:34 C76720 h HTTP Server running. ip=0.0.0.0 port=83
2015/02/13 17:40:35 76D00588 r V14 [internal] card detected
2015/02/13 17:40:36 76D00588 r V14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/02/13 17:40:36 76D00588 r V14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/13 17:40:36 76D00588 r V14 [internal] TEST tempo mhz check = 500 mhz
2015/02/13 17:40:36 76D00588 r V14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/02/13 17:40:36 76D00588 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/02/13 17:40:37 76D00588 r V14 [internal] Card type: P1TV
2015/02/13 17:40:37 76D00588 r V14 [internal] Rom version: 20AA
2015/02/13 17:40:37 76D00588 r V14 [internal] parental lock setting: FF FF FF FF
2015/02/13 17:40:37 76D00588 r V14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/02/13 17:40:37 76D00588 r V14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/02/13 17:40:37 76D00588 r V14 [internal] ready for requests
2015/02/13 17:40:37 76D00588 r V14 [internal] found card system videoguard2
2015/02/13 17:40:37 76D00588 r V14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2015/02/13 17:40:37 76D00588 r V14 [videoguard2] card detected
2015/02/13 17:40:37 76D00588 r V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/02/13 17:40:39 0 s init for all local cards done
2015/02/13 17:40:39 0 s anti cascading disabled
2015/02/13 17:40:39 76D02488 c plain dvbapi-client granted (lokal, au=on (1 reader))
2015/02/13 17:40:39 76D02488 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/02/13 17:40:44 76D02488 c [DVBAPI] Receiver sends PMT command 3 for channel 000A
2015/02/13 17:40:44 76D02488 c [DVBAPI] Receiver wants to demux srvid 000A on adapter 0000 camask 0008 index 0003 pmtpid 0065
2015/02/13 17:40:44 76D02488 c [ADD PID 0] CAID: 1702 ECM_PID: 1742 PROVID: 000000
2015/02/13 17:40:44 76D02488 c [ADD PID 1] CAID: 1833 ECM_PID: 1842 PROVID: 000000
2015/02/13 17:40:44 76D02488 c [ADD PID 2] CAID: 1836 ECM_PID: 1843 PROVID: 000000
2015/02/13 17:40:44 76D02488 c [ADD PID 3] CAID: 09C4 ECM_PID: 1B42 PROVID: 000000
2015/02/13 17:40:44 76D02488 c [ADD PID 4] CAID: 09AF ECM_PID: 1F42 PROVID: 000000
2015/02/13 17:40:44 76D02488 c [ADD PID 5] CAID: 098C ECM_PID: 1A42 PROVID: 000000
2015/02/13 17:40:44 76D02488 c Found 6 ECMpids and 5 STREAMpids in PMT
2015/02/13 17:40:44 76D02488 c [DVBAPI] Receiver wants to demux srvid 000A on adapter 0000 camask 0008 index 0003 pmtpid 0065
2015/02/13 17:40:44 76D02488 c New program number: 000A (1702:000A unknown) [pmt_list_management 3]
2015/02/13 17:40:44 76D02488 c [DVBAPI] Demuxer #0 trying to descramble PID #5 CAID 098C PROVID 000000 ECMPID 1A42 ANY CHID PMTPID 0065 VPID 01FF
2015/02/13 17:40:44 76D00588 r V14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/02/13 17:40:44 76D02488 c lokal (098C&000000/012D/000A/98:9F9F69CD76071B81E0C91C39471E6750): not found (71 ms) by V14
2015/02/13 17:40:44 76D02488 c lokal (098C&000000/012D/000A/98:9F9F69CD76071B81E0C91C39471E6750): not found (1 ms) by V14
2015/02/13 17:40:44 76D00588 r V14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/02/13 17:40:44 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (50 ms) by V14
2015/02/13 17:40:45 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (1 ms) by V14
2015/02/13 17:40:45 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (2 ms) by V14
2015/02/13 17:40:50 0 --- Skipped 18 duplicated log lines ---
2015/02/13 17:40:50 76D00588 r V14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/02/13 17:40:50 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (50 ms) by V14
2015/02/13 17:40:50 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (2 ms) by V14
2015/02/13 17:40:50 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (3 ms) by V14
2015/02/13 17:40:50 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (2 ms) by V14
2015/02/13 17:40:51 0 --- Skipped 2 duplicated log lines ---
2015/02/13 17:40:51 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (1 ms) by V14
2015/02/13 17:40:51 76D02488 c lokal (098C&000000/012D/000A/98:2151B5D92A47C00EFD60AA96F63F4DBE): not found (3 ms) by V14
2015/02/13 17:40:52 76D00588 r V14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/02/13 17:40:52 76D02488 c lokal (098C&000000/012D/000A/98:7AC19F500EC391BB8C325F159DC91CA2): not found (55 ms) by V14
2015/02/13 17:40:52 76D02488 c lokal (098C&000000/012D/000A/98:7AC19F500EC391BB8C325F159DC91CA2): not found (2 ms) by V14
2015/02/13 17:40:52 76D02488 c lokal (098C&000000/012D/000A/98:7AC19F500EC391BB8C325F159DC91CA2): not found (1 ms) by V14
2015/02/13 17:40:52 76D02488 c lokal (098C&000000/012D/000A/98:7AC19F500EC391BB8C325F159DC91CA2): not found (2 ms) by V14
2015/02/13 17:40:53 76D02488 c lokal (098C&000000/012D/000A/98:7AC19F500EC391BB8C325F159DC91CA2): not found (1 ms) by V14
2015/02/13 17:40:53 76D02488 c lokal (098C&000000/012D/000A/98:7AC19F500EC391BB8C325F159DC91CA2): not found (3 ms) by V14
2015/02/13 17:40:54 0 --- Skipped 2 duplicated log lines ---
2015/02/13 17:40:54 76D02488 c lokal (098C&000000/012D/000A/98:7AC19F500EC391BB8C325F159DC91CA2): not found (1 ms) by V14
2015/02/13 17:40:54 76D02488 c lokal (098C&000000/012D/000A/98:7AC19F500EC391BB8C325F159DC91CA2): not found (2 ms) by V14

Es kommen ewig keine EMMs an, dann plötzlich:

Spoiler

2015/02/13 17:48:05 76D02488 c V14 [videoguard2] Successfully added EMM to /var/log/oscam/V14_emm.log
2015/02/13 17:48:05 76D02488 c V14 [videoguard2] Successfully added binary EMM to /var/log/oscam/V14_emm.bin
2015/02/13 17:48:05 76D02488 c V14 [videoguard2] lokal emmtype=unique, len=47, idx=0, cnt=6: blocked (0 ms)

was übersehe ich da?

Danke im Vorhinein für die Hilfe!

Schöne Grüße

 

[domiwsk]

AW: Sky V14 Wird nicht hell

hallo schau mal hier
https://www.digital-eliteboard.com/...altung-verlaengerung-der-v14-melde-thema.html

 

[djdolla]

AW: Sky V14 Wird nicht hell

Ich versteh nicht so ganz was ich mit diesen Pärchen machen soll. Sorry für meine unwissenheit...

 

[rowdy76]

AW: Sky V14 Wird nicht hell

Pärchen gibst du manuell im oscam web if ein..
erst aktivierungs emm dann tiers
klick auf readers dann auf den reader deiner karte wo pfeil nach unten zeigt symbol anklicken (write emm) und dort die emms einfügen und launch klicken..
(Einzelnd)

 

[4gx35]

AW: Sky V14 Wird nicht hell

du weisst aber schon, Link Removed ? also beim 1. emm die 83
und dass nach 82708341 die folgenden 8 stellen zu xxxen sind, das ist deine kartennr., solltest du besser nicht posten

 

[djdolla]

AW: Sky V14 Wird nicht hell

Danke, nun weiß ich wo ich es eingeben soll. Wenn du nochmal meinen ersten post ansiehst, dort habe ich meine emm logs gepostet. was davon muss ich eingeben? oder kannst du mir ne erklärung zu den logs verlinken damit ich das in zukunft auch versteh?

 

[rowdy76]

AW: Sky V14 Wird nicht hell

emmlogdir = /var/log/oscam

Dort werden die emms gespeichert. .

die hier posten.. aber bitte ohne deine seriennr die dabei ist. .

siehe post #5

 

[djdolla]

AW: Sky V14 Wird nicht hell

Danke Leute ihr habt mir echt weitergeholfen!

 

[bombadil]

AW: Sky V14 Wird nicht hell

Hi

emmlogdir = /var/log/oscam

das Verzeichnis muss existieren. Lass den Parameter eunfach leer, dann findest du die Datei bei deinen Konfigs. (default)

Grüße
Bombadil

 

[djdolla]

AW: Sky V14 Wird nicht hell

Danke Leute, alles bestens, habs nun geschafft. Wie kann ich denn das Thema auf erledigt setzen?

Viele Grüße

 

[dodo83]

AW: Sky V14 Wird nicht hell

hab ich gemacht
kannst du auch wenn du beim erstem Post auf Bearbeiten gehst, dann Präfix ändern