Sky V14 rennt!

[strahli1984]

AW: Sky V14 rennt!

dann muss ich mir aber erstmal ein nonstick image drauf ziehen, oder sehe ich das jetzt verkehrt??

 

[HappyMicha]

AW: Sky V14 rennt!

Hallo dodo83,

zum Thema UDEV da sagt mir ipc. " no readers Fond "

 

[dodo83]

AW: Sky V14 rennt!

dann wird wohl die Easymouse nicht erkannt oder probier mal ein anderes USB kabel an der maus oder die maus komplett wo anders testen
sonst müsste der reader unter IPC zu erkennen sein

 

[HappyMicha]

AW: Sky V14 rennt!

habe jetzt das kabel mehrmals gewechselt und auch die zeite maus rangesteck :-( nichts gefunden :-(

sind evtl. die mäuse software abgestürtzt ??? kann mann sie neu bespielen ??? blinken tun sie aber wenn ich sie rann stecke

gibt es nen usb paket das ich noch installieren muss ????

 

[strahli1984]

AW: Sky V14 rennt!

so, nun hab ich mal die mouse an meine 7170 mit nem nonstick image angeschlossen und komme zu folgendem Ergebnis:


logfile

Spoiler

5DB7D8 r v14 [mouse] card detected
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] ATR: XXXXXXXXXXXXX
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] Setting baudrate to 38400 bps
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] Calculated work ETU is 26.05 us
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2014/01/12 17:38:07 5DB7D8 r v14 [mouse] card system not supported
2014/01/12 17:38:07 5DB7D8 r v14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/01/12 17:38:08 5DB7D8 r v14 [mouse] ATR: XXXXXXXXXXXXX
2014/01/12 17:38:08 5DB7D8 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/12 17:38:08 5DB7D8 r v14 [mouse] Calculated work ETU is 104.20 us
2014/01/12 17:38:08 5DB7D8 r v14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2014/01/12 17:38:09 5DB7D8 r v14 [mouse] card system not supported
2014/01/12 17:38:09 5DB7D8 r v14 [mouse] card initializing error

Da kann doch bald irgendwas nicht stimmen.....

 

[Backo]

AW: Sky V14 rennt!

Den ATR brauchste nicht unleserlich machen, der ist sowieso bekannt. Desweiteren kann es die Fehlersuche erschweren. Wie sieht denn jetzt der Oscam.server aus? Und auf der Fritte 7170 läuft aufgrund des USB 1.1 Ports kein Fastmode.

Mit Cardmhz auf 357 und Mhz auf 600 sowie die Easymouse 2 auf 6 Mhz einstellen sollte die Karte bei ~120ms laufen und reicht somit im Heimnetzwerk locker zum sharen aus.



MfG

 

[strahli1984]

Okay, das mit dem ATR wusste ich nicht.

server

Spoiler

[reader]
label = v14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
Detect = CD
ident = 09c4:000000
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100
ndsversion = 2

Hab mittlerweile die Vermutung das die mouse vielleicht einen weg hat.
Hab mir, um das auszuschließen, grad noch eine bei Amazon bestellt.

Hab es so eingestellt, wie du gesagt hast, hier nochmal meine log-File

Spoiler

2014/01/12 18:54:58 0 s starting thread log_list_thread
2014/01/12 18:54:58 0 s log_list_thread thread started
2014/01/12 18:54:58 0 s >> OSCam << cardserver started, version 1.20-unstable_by_EasyBuild_svn, build #7963 (mipsel-linux-uclibc-libusb)
2014/01/12 18:54:58 0 s version=1.20-unstable_by_EasyBuild_svn, build #7963, system=mipsel-linux-uclibc-libusb, nice=-1
2014/01/12 18:54:58 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2014/01/12 18:54:58 0 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2014/01/12 18:54:58 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2014/01/12 18:54:58 0 s services reloaded: 0 services freed, 36 services loaded, rejected 0
2014/01/12 18:54:58 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/01/12 18:54:58 0 s signal handling initialized (type=sysv)
2014/01/12 18:54:59 0 s 775 service-id's loaded in 32ms
2014/01/12 18:54:59 0 s 3 tier-id's loaded
2014/01/12 18:54:59 0 s 4 provid's loaded
2014/01/12 18:54:59 0 s 1 lengths for caid guessing loaded
2014/01/12 18:54:59 0 s 11 entries read from oscam.whitelist
2014/01/12 18:54:59 0 s 1 entries read from oscam.cacheex
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s monitor: initialized (fd=6, port=988)
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s camd33: disabled
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s camd35: disabled
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s cs378x: disabled
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s newcamd: disabled
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s cccam: initialized (fd=7, port=34000, crypted)
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s pandora: disabled
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s csp: disabled
2014/01/12 18:54:59 0 s Starting listener 0
2014/01/12 18:54:59 0 s radegast: disabled
2014/01/12 18:54:59 0 s starting thread http
2014/01/12 18:54:59 0 s http thread started
2014/01/12 18:54:59 0 s starting thread reader check
2014/01/12 18:54:59 0 s reader check thread started
2014/01/12 18:54:59 0 s starting thread check
2014/01/12 18:54:59 0 s check thread started
2014/01/12 18:54:59 0 s v14 [mouse] creating thread for device /dev/ttyUSB0
2014/01/12 18:54:59 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/12 18:54:59 0 s waiting for local card init
2014/01/12 18:54:59 5DCFE8 h HTTP Server listening on port 83
2014/01/12 18:54:59 5DB7D8 r v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2014/01/12 18:55:00 5DB7D8 r v14 [mouse] card detected
2014/01/12 18:55:01 5DB7D8 r v14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/12 18:55:01 5DB7D8 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/12 18:55:01 5DB7D8 r v14 [mouse] Setting baudrate to 38400 bps
2014/01/12 18:55:01 5DB7D8 r v14 [mouse] Calculated work ETU is 15.50 us
2014/01/12 18:55:01 5DB7D8 r v14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2014/01/12 18:55:02 5DB7D8 r v14 [mouse] card system not supported
2014/01/12 18:55:02 5DB7D8 r v14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/01/12 18:55:03 5DB7D8 r v14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/12 18:55:03 5DB7D8 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/12 18:55:03 5DB7D8 r v14 [mouse] Calculated work ETU is 62.00 us
2014/01/12 18:55:03 5DB7D8 r v14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2014/01/12 18:55:04 5DB7D8 r v14 [mouse] card system not supported
2014/01/12 18:55:04 5DB7D8 r v14 [mouse] card initializing error
2014/01/12 18:55:05 0 s init for all local cards done
2014/01/12 18:55:05 0 s anti cascading disabled

Sie müssen registriert sein, um Links zu sehen.

 

[Backo]

AW: Sky V14 rennt!

Mal so übernehmen und Fritte neu starten.

Oscam.server

Spoiler

[reader]
label = v14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,1,2
ndsversion = 2

Wenn das nicht läuft mal komplett mhz und cardmhz weg lassen. Welche OSCamversion wird genutzt?


MfG

 

[Promillefighter]

AW: Sky V14 rennt!

Moin Leute,

kann mir evtl. einer sagen warum meine Sky V14 karte in der Dreambox 8000 mit OSCAM 1.20-unstable_svn build #7967 entschlüsselt

jedoch mit der OSCAM 1.20-unstable_svn build r9162 Version nicht mehr??

Oscam Server:

Spoiler

[reader]label = v14
protocol = internal
device = /dev/sci0
services = skyall
caid = 098C
boxid = 12345678
ins7e11 = 13
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,3
ndsversion = 2

Oscam Log:

Spoiler

2014/01/14 07:46:46 0 s v14 [internal] creating thread for device /dev/sci0
2014/01/14 07:46:46 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/14 07:46:46 0 s waiting for local card init
2014/01/14 07:46:46 564B88 r v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2014/01/14 07:46:46 2B000468 h webif: decompressed 54679 bytes back into 156336 bytes
2014/01/14 07:46:46 2B000468 h HTTP Server running. ip=0.0.0.0 port=90
2014/01/14 07:46:47 564B88 r v14 [internal] card detected
2014/01/14 07:46:49 564B88 r v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/14 07:46:49 564B88 r v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/14 07:46:49 564B88 r v14 [internal] Calculated work ETU is 15.50 us reader mhz = 600
2014/01/14 07:46:49 564B88 r v14 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/01/14 07:46:51 564B88 r v14 [internal] card system not supported
2014/01/14 07:46:51 564B88 r v14 [internal] Normal mode failed, reverting to Deprecated Mode
2014/01/14 07:46:53 564B88 r v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/14 07:46:53 564B88 r v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/14 07:46:53 564B88 r v14 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/01/14 07:46:53 564B88 r v14 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/01/14 07:46:55 564B88 r v14 [internal] card system not supported
2014/01/14 07:46:55 564B88 r v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/14 07:46:55 564B88 r v14 [internal] card initializing error

MfG Promillefighter

 

[dodo83]

AW: Sky V14 rennt!

hi
bei den neueren oscam versionen und der verwendung des internen Kartenlesegeräts musst du die mhz/cardmhz anpassen, siehe hier -> https://www.digital-eliteboard.com/...Karten/page5&p=2091877&viewfull=1#post2091877

 

[Promillefighter]

AW: Sky V14 rennt!

Sie müssen registriert sein, um Links zu sehen.

Danke dodo83 :emoticon-0111-blush Jetzt läuft alles :emoticon-0111-blush

 

[GS750]

AW: Sky V14 rennt!

Spoiler

so, nun hab ich mal die mouse an meine 7170 mit nem nonstick image angeschlossen und komme zu folgendem Ergebnis:


logfile

Spoiler

5DB7D8 r v14 [mouse] card detected
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] ATR: XXXXXXXXXXXXX
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] Setting baudrate to 38400 bps
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] Calculated work ETU is 26.05 us
2014/01/12 17:38:04 5DB7D8 r v14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2014/01/12 17:38:07 5DB7D8 r v14 [mouse] card system not supported
2014/01/12 17:38:07 5DB7D8 r v14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/01/12 17:38:08 5DB7D8 r v14 [mouse] ATR: XXXXXXXXXXXXX
2014/01/12 17:38:08 5DB7D8 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/12 17:38:08 5DB7D8 r v14 [mouse] Calculated work ETU is 104.20 us
2014/01/12 17:38:08 5DB7D8 r v14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2014/01/12 17:38:09 5DB7D8 r v14 [mouse] card system not supported
2014/01/12 17:38:09 5DB7D8 r v14 [mouse] card initializing error

Da kann doch bald irgendwas nicht stimmen.....

Hi,
Habe auch eine v14 in der Easymouse 2 Non-stickimage Fritz 7141 hier mein server

Spoiler

[reader]
label = sky-v14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 358
cardmhz = 358
ident = 098C:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
auprovid = 00098C
ndsversion = 2

Ich muss immer ein Reboot machen, machmal dann noch im webif unter shutdown ein restart
mit 120 ms zeiten Cardmhz auf 358 und Mhz auf 358 s die Easymouse 2 auf 3,3v Phoenix 3,579MHz 6MHz

 

[strahli1984]

AW: Sky V14 rennt!

Ich kann nun berichten, das es läuft!!!

wie ich vermutet hatte, ist die easymouse wohl nicht ganz in Ordnung gewesen.
Heute morgen kam dann meine Neue.
Hab sie angeschlossen, sie hat die Karte auf Anbieb erkannt.

Läuft jetzt 1A an meiner 7240 mit ner Zeit von knapp 90ms.

Aber besten Dank für eure Hilfe und Unterstützung!!!

 

[asumang]

AW: Sky V14 rennt!

hi Leute,

habe da ein kleines Problem
schon länger habe ich eine v13 für Sat in einer fb7270v2 und einer Smargo 1.7
mit Zeiten um die 150 ms
oscam.server

Spoiler

[reader]label = v13
protocol = smartreader
device = Serial:skyshare
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,3,2
ndsversion = 2

seit einer Woche ungefähr habe ich nun auch eine v14 für Kabel auch mit einem Smargo v1.7
kaum stecke ich die in den USB-Hub jagen die Zeiten der v13 auf 600-1000ms in die Höhe
und auch die v14 hat keine besseren Zeiten
oscam.server

Spoiler

[reader]label = v14
protocol = smartreader
device = Serial:skyshare1
caid = 098C
boxid = 12345678
detect = cd
mhz = 534
cardmhz = 369
group = 3
emmcache = 1,3,2

die mhz waren vorher auf 368 aber hat auch nichts geändert
und smargopatch =1 hatte ich auch drinnen
war auch keine Änderung
oscam-log

Spoiler

2014/01/15 14:45:06 0 s >> OSCam << cardserver started, version 1.20-emu, build r9209 (mipsel-linux-uclibc-libusb)2014/01/15 14:45:06 0 s creating pidfile /var/run/oscam.pid with pid 29232
2014/01/15 14:45:06 0 s services reloaded: 0 services freed, 18 services loaded, rejected 0
2014/01/15 14:45:06 0 s userdb reloaded: 19 accounts loaded, 0 expired, 0 disabled
2014/01/15 14:45:06 0 s signal handling initialized
2014/01/15 14:45:06 0 s 245 service-id's loaded in 12ms
2014/01/15 14:45:06 0 s 202 tier-id's loaded
2014/01/15 14:45:06 0 s 14 provid's loaded
2014/01/15 14:45:06 0 s 22 lengths for caid guessing loaded
2014/01/15 14:45:06 0 s monitor: initialized (fd=7, port=32322)
2014/01/15 14:45:06 0 s cccam: initialized (fd=8, port=32322)
2014/01/15 14:45:06 0 s v14 [smartreader] creating thread for device Serial:skyshare1
2014/01/15 14:45:06 0 s v13 [smartreader] creating thread for device Serial:skyshare
2014/01/15 14:45:06 0 s camd3 [camd35] creating thread for device 10.0.0.99
2014/01/15 14:45:06 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/15 14:45:06 0 s waiting for local card init
2014/01/15 14:45:06 4E4F70 r v14 [smartreader] De SR_init
2014/01/15 14:45:06 4E4F70 r v14 [smartreader] initing smargo type SR
2014/01/15 14:45:06 4E6C50 r v13 [smartreader] De SR_init
2014/01/15 14:45:06 514CD8 p camd35 proxy 10.0.0.99:33455
2014/01/15 14:45:06 514CD8 p camd3 [camd35] proxy initialized, server 10.0.0.99:33455
2014/01/15 14:45:06 51F650 h webif: decompressed 68560 bytes back into 176784 bytes
2014/01/15 14:45:06 51F650 h HTTP Server running. ip=0.0.0.0 port=83
2014/01/15 14:45:06 4E4F70 r v14 [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/01/15 14:45:06 4E4F70 r Found reader with serial skyshare1 at 001:006
2014/01/15 14:45:06 4E4F70 r Found smartreader device Serial:skyshare1
2014/01/15 14:45:06 4E6C50 r v13 [smartreader] initing smargo type SR
2014/01/15 14:45:06 4E6C50 r v13 [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/01/15 14:45:06 4E6C50 r Found reader with serial baerli14 at 001:005
2014/01/15 14:45:06 4E6C50 r Found smartreader device Serial:skyshare
2014/01/15 14:45:06 4E6C50 r v13 [smartreader] Pthread Wordt gecreeerd
2014/01/15 14:45:06 4E6C50 r v13 [smartreader] clocking for smartreader with smartreader protocol
2014/01/15 14:45:06 4E6C50 r v13 [smartreader] Reader initialized (device=Serial:skyshare, detect=cd, mhz= AUTO, cardmhz=369)
2014/01/15 14:45:06 4E4F70 r v14 [smartreader] Pthread Wordt gecreeerd
2014/01/15 14:45:06 4E4F70 r v14 [smartreader] clocking for smartreader with smartreader protocol
2014/01/15 14:45:06 4E4F70 r v14 [smartreader] Reader initialized (device=Serial:skyshare, detect=cd, mhz= AUTO, cardmhz=369)
2014/01/15 14:45:07 4E6C50 r v13 [smartreader] card detected
2014/01/15 14:45:07 4E6C50 r v13 [smartreader] init card at 369 mhz
2014/01/15 14:45:07 4E4F70 r v14 [smartreader] card detected
2014/01/15 14:45:07 4E4F70 r v14 [smartreader] init card at 369 mhz
2014/01/15 14:45:11 4E4F70 r v14 [smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/15 14:45:11 4E4F70 r v14 [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/15 14:45:11 4E4F70 r v14 [smartreader] Calculated work ETU is 17.42 us reader mhz = 534
2014/01/15 14:45:11 4E4F70 r v14 [smartreader] autospeed = 1
2014/01/15 14:45:11 4E4F70 r v14 [smartreader] Effectif reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
2014/01/15 14:45:11 4E6C50 r v13 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/01/15 14:45:11 4E6C50 r v13 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/15 14:45:11 4E6C50 r v13 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2014/01/15 14:45:11 4E6C50 r v13 [smartreader] autospeed = 1
2014/01/15 14:45:11 4E6C50 r v13 [smartreader] Effectif reader settings mhz =534 F= 372 D= 1 N=3 T=0 inv=1 parity=ODD
2014/01/15 14:45:12 4E4F70 r v14 [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/15 14:45:12 4E6C50 r v13 [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/15 14:45:13 4E4F70 r v14 [smartreader] Card type: P1TV
2014/01/15 14:45:13 4E4F70 r v14 [smartreader] Rom version: 20AA
2014/01/15 14:45:13 4E6C50 r v13 [smartreader] Card type: P1TV
2014/01/15 14:45:13 4E6C50 r v13 [smartreader] Rom version: 10A7
2014/01/15 14:45:14 4E6C50 r v13 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/01/15 14:45:14 4E6C50 r v13 [smartreader] found card system videoguard2
2014/01/15 14:45:14 4E6C50 r v13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/15 14:45:14 4E6C50 r v13 [videoguard2] card detected
2014/01/15 14:45:14 4E6C50 r v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/01/15 14:45:14 4E6C50 r v13 [smartreader] Doing fast reset
2014/01/15 14:45:14 4E4F70 r v14 [smartreader] parental lock setting: FF FF FF FF
2014/01/15 14:45:14 4E4F70 r v14 [smartreader] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/01/15 14:45:14 4E4F70 r v14 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2014/01/15 14:45:14 4E4F70 r v14 [smartreader] ready for requests
2014/01/15 14:45:14 4E4F70 r v14 [smartreader] found card system videoguard2
2014/01/15 14:45:14 4E4F70 r v14 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/15 14:45:14 4E4F70 r v14 [videoguard2] card detected
2014/01/15 14:45:14 4E4F70 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/01/15 14:45:15 4E4F70 r v14 [videoguard2] tier: 0065, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:15 4E4F70 r v14 [videoguard2] tier: 0066, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:15 4E4F70 r v14 [videoguard2] tier: 0067, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:15 4E4F70 r v14 [videoguard2] tier: 0068, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:15 4E6C50 r v13 [smartreader] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2014/01/15 14:45:15 4E6C50 r v13 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=3
2014/01/15 14:45:15 4E6C50 r v13 [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2014/01/15 14:45:15 4E6C50 r v13 [smartreader] autospeed = 1
2014/01/15 14:45:15 4E6C50 r v13 [smartreader] Effectif reader settings mhz =534 F= 372 D= 16 N=3 T=0 inv=1 parity=ODD
2014/01/15 14:45:15 4E4F70 r v14 [videoguard2] tier: 0069, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:15 4E4F70 r v14 [videoguard2] tier: 006b, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:15 4E4F70 r v14 [videoguard2] tier: 007b, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:16 4E4F70 r v14 [videoguard2] tier: 007d, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:16 4E4F70 r v14 [videoguard2] tier: 008e, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:16 4E6C50 r v13 [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/15 14:45:16 4E4F70 r v14 [videoguard2] tier: 00be, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:16 4E4F70 r v14 [videoguard2] tier: 00c7, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:16 4E4F70 r v14 [videoguard2] tier: 00c8, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:16 4E4F70 r v14 [videoguard2] tier: 00c9, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:16 4E4F70 r v14 [videoguard2] tier: 00ca, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:16 4E4F70 r v14 [videoguard2] tier: 00e5, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:17 4E4F70 r v14 [videoguard2] tier: 00f3, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:17 4E4F70 r v14 [videoguard2] tier: 00fa, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:17 4E4F70 r v14 [videoguard2] tier: 00ff, expiry date: 2014/05/04-01:00:00
2014/01/15 14:45:17 4E6C50 r v13 [smartreader] Card type: P1TV
2014/01/15 14:45:17 4E6C50 r v13 [smartreader] Rom version: 10A7
2014/01/15 14:45:17 4E6C50 r v13 [smartreader] parental lock setting: FF FF FF FF
2014/01/15 14:45:17 4E6C50 r v13 [smartreader] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2014/01/15 14:45:17 4E6C50 r v13 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2014/01/15 14:45:17 4E6C50 r v13 [smartreader] ready for requests
2014/01/15 14:45:17 4E6C50 r v13 [smartreader] found card system videoguard2
2014/01/15 14:45:17 4E6C50 r v13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/15 14:45:17 4E6C50 r v13 [videoguard2] card detected
2014/01/15 14:45:17 4E6C50 r v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2014/01/15 14:45:38 0 s init for all local cards done
2014/01/15 14:45:38 0 s anti cascading disabled
2014/01/15 14:45:50 4E6C50 r v13 [videoguard2] classD0 ins40: (-2) status not ok 00 00
2014/01/15 14:45:50 4E6C50 r v13 [videoguard2] The card is not answering correctly! Restarting reader for safety
2014/01/15 14:45:51 4E6C50 r v13 [videoguard2] creating thread for device Serial:skyshare
2014/01/15 14:45:51 56A3D0 r v13 [videoguard2] De SR_init
2014/01/15 14:45:51 56A3D0 r v13 [videoguard2] initing smargo type SR
2014/01/15 14:45:51 56A3D0 r v13 [videoguard2] Using 0x01/0x82 as endpoint for smartreader hardware detection
2014/01/15 14:45:51 56A3D0 r Found reader with serial skyshare at 001:005
2014/01/15 14:45:51 56A3D0 r Found smartreader device Serial:skyshare
2014/01/15 14:45:51 56A3D0 r v13 [videoguard2] Pthread Wordt gecreeerd
2014/01/15 14:45:51 56A3D0 r v13 [videoguard2] clocking for smartreader with smartreader protocol
2014/01/15 14:45:51 56A3D0 r v13 [videoguard2] Reader initialized (device=Serial:skyshare, detect=cd, mhz= AUTO, cardmhz=369)
2014/01/15 14:45:51 56A3D0 r v13 [videoguard2] card detected
2014/01/15 14:45:51 56A3D0 r v13 [smartreader] init card at 369 mhz
2014/01/15 14:45:52 567538 c xxxx (098C&000000/0131/0008/98:F221856001636028699A17BFAF4EA771): found (593 ms) by v14 - Sky Comedy
2014/01/15 14:45:53 567538 c xxxx (098C&000000/0131/0008/98:E7E0E9EBE9CD16538AE2516A7E1F73BE): found (581 ms) by v14 - Sky Comedy
2014/01/15 14:45:55 56A3D0 r v13 [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/01/15 14:45:55 56A3D0 r v13 [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/01/15 14:45:55 56A3D0 r v13 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2014/01/15 14:45:55 56A3D0 r v13 [smartreader] autospeed = 1
2014/01/15 14:45:55 56A3D0 r v13 [smartreader] Effectif reader settings mhz =534 F= 372 D= 1 N=3 T=0 inv=1 parity=ODD
2014/01/15 14:45:56 56A3D0 r v13 [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/15 14:45:58 56A3D0 r v13 [smartreader] Card type: P1TV
2014/01/15 14:45:58 56A3D0 r v13 [smartreader] Rom version: 10A7
2014/01/15 14:45:59 56A3D0 r v13 [smartreader] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/01/15 14:45:59 56A3D0 r v13 [smartreader] found card system videoguard2
2014/01/15 14:45:59 56A3D0 r v13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/15 14:45:59 56A3D0 r v13 [videoguard2] card detected
2014/01/15 14:45:59 56A3D0 r v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/01/15 14:45:59 56A3D0 r v13 [smartreader] Doing fast reset
2014/01/15 14:46:00 56A3D0 r v13 [smartreader] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2014/01/15 14:46:00 56A3D0 r v13 [smartreader] Init card protocol T0, FI=1, F=372, D=16, N=3
2014/01/15 14:46:00 56A3D0 r v13 [smartreader] Calculated work ETU is 4.35 us reader mhz = 534
2014/01/15 14:46:00 56A3D0 r v13 [smartreader] autospeed = 1
2014/01/15 14:46:00 56A3D0 r v13 [smartreader] Effectif reader settings mhz =534 F= 372 D= 16 N=3 T=0 inv=1 parity=ODD
2014/01/15 14:46:01 56A3D0 r v13 [smartreader] ATR Fsmax is 5 MHz, clocking card to atr Fsmax for smartreader cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/15 14:46:03 56A3D0 r v13 [smartreader] Card type: P1TV
2014/01/15 14:46:03 56A3D0 r v13 [smartreader] Rom version: 10A7
2014/01/15 14:46:05 56A3D0 r v13 [smartreader] parental lock setting: FF FF FF FF
2014/01/15 14:46:05 56A3D0 r v13 [smartreader] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2014/01/15 14:46:05 56A3D0 r v13 [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2014/01/15 14:46:05 56A3D0 r v13 [smartreader] ready for requests
2014/01/15 14:46:05 56A3D0 r v13 [smartreader] found card system videoguard2
2014/01/15 14:46:05 56A3D0 r v13 [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/15 14:46:05 56A3D0 r v13 [videoguard2] card detected
2014/01/15 14:46:05 56A3D0 r v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2014/01/15 14:46:17 56A3D0 r v13 [videoguard2] tier: 0048, expiry date: 2014/03/22-00:01:00
2014/01/15 14:46:17 56A3D0 r v13 [videoguard2] tier: 005a, expiry date: 2014/03/22-00:01:00 Sky Sport HD Extra
2014/01/15 14:46:17 56A3D0 r v13 [videoguard2] tier: 005d, expiry date: 2014/03/22-00:01:00
2014/01/15 14:46:18 56A3D0 r v13 [videoguard2] tier: 007b, expiry date: 2014/03/22-00:01:00 TNT Serie HD
2014/01/15 14:46:18 56A3D0 r v13 [videoguard2] tier: 007d, expiry date: 2014/03/22-00:01:00 Sky Sport
2014/01/15 14:46:18 56A3D0 r v13 [videoguard2] tier: 008e, expiry date: 2014/03/22-00:01:00
2014/01/15 14:46:18 56A3D0 r v13 [videoguard2] tier: 00bc, expiry date: 2014/03/22-00:01:00 ORF All
2014/01/15 14:46:18 56A3D0 r v13 [videoguard2] tier: 00bd, expiry date: 2014/03/22-00:01:00 ATV/Puls4
2014/01/15 14:46:18 56A3D0 r v13 [videoguard2] tier: 00be, expiry date: 2014/03/22-00:01:00
2014/01/15 14:46:18 56A3D0 r v13 [videoguard2] tier: 00c0, expiry date: 2014/03/22-00:01:00 Sky Welt Extra (Sky Welt)
2014/01/15 14:46:18 56A3D0 r v13 [videoguard2] tier: 00c7, expiry date: 2014/03/22-00:01:00 Sky Welt(Sky Starter)
2014/01/15 14:46:19 56A3D0 r v13 [videoguard2] tier: 00c8, expiry date: 2014/03/22-00:01:00 Sky Film
2014/01/15 14:46:19 56A3D0 r v13 [videoguard2] tier: 00c9, expiry date: 2014/03/22-00:01:00 Sky Welt HD (Sky Welt)
2014/01/15 14:46:19 56A3D0 r v13 [videoguard2] tier: 00ca, expiry date: 2014/03/22-00:01:00 Sky Film HD
2014/01/15 14:46:19 56A3D0 r v13 [videoguard2] tier: 00cb, expiry date: 2014/03/22-00:01:00 Sky Sport HD
2014/01/15 14:46:19 56A3D0 r v13 [videoguard2] tier: 00f3, expiry date: 2014/03/22-00:01:00 Blue Movie Info
2014/01/15 14:46:19 56A3D0 r v13 [videoguard2] tier: 00fa, expiry date: 2014/03/22-00:01:00 2014/01/15 14:46:19 56A3D0 r v13 [videoguard2] tier: 00ff, expiry date: 2014/03/22-00:01:00

die v13 rennt im fastmode nur halt der Speed ist Sch....e
und die v14 rennt nicht im fastmode

ein igel ist unterwegs ich hoffe das der was bringt?
kann ich jetzt schon was machen damit die Zeiten besser werden?

bin für jede Hilfe dankbar

 

[sluke]

AW: Sky V14 rennt!

Hatte ein ähnliches Problem.
Bei mir half es die global, shared und unbekannten EMS zu blocken.

Hast du nur einen Reciver, der AU macht oder machen dies mehrere. Es reicht wenn nur ein Receiver AU macht.

Wenn es nicht hilft würde ich den Smargo auf 1.5 downgraden. Geht nur über vorher auf die 1.0.