Sky V13 Oscam Easymouse2 Raspbian läuft nicht

[dodo83]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

dann probier mal eine leicht ältere oscam

 

[Akiviech]

Dann werde ich das mal versuchen, aber erst am Wochenende, muss jetzt mal schlafen, morgen um 5 geht's geht die Arbeit wieder los
-------------

Hallo zusammen,

also ich hab meinen Server neu aufgesetzt. Inzwischen habe ich auch eine neue v14 Karte. Wenn ich diese in den Server stecke bekomme ich folgendes log. Weiß nicht mehr weiter was ich tun soll, habt Ihr eine Idee?

Spoiler

-------------------------------------------------------------------------------

>> OSCam << cardserver started at Tue Mar 25 21:14:40 2014

-------------------------------------------------------------------------------

2014/03/25 21:14:40 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9127 (arm-linux-gnueabihf)

2014/03/25 21:14:40 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2036


-------------------------------------------------------------------------------

>> DOSCam << started at Tue Mar 25 21:14:40 2014

-------------------------------------------------------------------------------

2014/03/25 21:14:40 0 s >> DOSCam << started, V0.18 (arm-bcm2708hardfp-linux-gnueabi-libusb)

2014/03/25 21:14:40 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 2039

2014/03/25 21:14:40 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled

2014/03/25 21:14:40 0 s signal handling initialized

2014/03/25 21:14:40 0 s LED support is not active. Can't detect machine type.

2014/03/25 21:14:40 0 s monitor: initialized (fd=5, port=988, ip=192.168.178.10)

2014/03/25 21:14:40 0 s cccam (used for zeroconf): initialized (fd=6, port=21526, ip=192.168.178.10)

2014/03/25 21:14:40 0 s SkyV14 [mouse] creating thread for device /dev/ttyUSB0

2014/03/25 21:14:40 0 s EMU [constcw] creating thread for device /usr/local/etc/SoftCam.Key

2014/03/25 21:14:40 0 s loadbalancer: can't read from file /tmp/.doscam/stat

2014/03/25 21:14:40 0 s waiting for local card init

2014/03/25 21:14:40 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled

2014/03/25 21:14:40 0 s signal handling initialized

2014/03/25 21:14:40 0 s SkyV14 [mouse] creating thread for device /dev/ttyUSB0

2014/03/25 21:14:40 DB4120 p EMU [constcw] proxy initialized, server /usr/local/etc/SoftCam.Key:0

2014/03/25 21:14:40 DC0788 h webif: decompressed 53348 bytes back into 153928 bytes

2014/03/25 21:14:40 0 s EMU [constcw] creating thread for device /usr/local/etc/SoftCam.Key

2014/03/25 21:14:40 0 s loadbalancer: can't read from file /tmp/.oscam/stat

2014/03/25 21:14:40 0 s waiting for local card init

2014/03/25 21:14:40 798DA8 p [CONSTCW] local reader: EMU (file: /usr/local/etc/SoftCam.Key)

2014/03/25 21:14:40 798DA8 p EMU [constcw] proxy initialized, server /usr/local/etc/SoftCam.Key:0

2014/03/25 21:14:40 78BD98 h webif: decompressed 52635 bytes back into 155668 bytes

2014/03/25 21:14:40 78BD98 h WARNING: Your http disk template /usr/local/etc/picons/HEADER.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20,r0.14). Please consider upgrading it!

2014/03/25 21:14:40 78BD98 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;1820323145;1.20-unstable_svn;9127;-->

2014/03/25 21:14:40 78BD98 h WARNING: Your http disk template /usr/local/etc/picons/CLIENTSTATUSBIT.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20-unstable_svn,r7361). Please consider upgrading it!

2014/03/25 21:14:40 78BD98 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;4207258334;1.20-unstable_svn;9127;-->

2014/03/25 21:14:40 78BD98 h WARNING: Your http disk template /usr/local/etc/picons/USERCONFIGLIST.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20,r0.14). Please consider upgrading it!

2014/03/25 21:14:40 78BD98 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3978668569;1.20-unstable_svn;9127;-->

2014/03/25 21:14:40 78BD98 h WARNING: Your http disk template /usr/local/etc/picons/USERCONFIGLISTBIT.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20-unstable_svn,r8938). Please consider upgrading it!

2014/03/25 21:14:40 78BD98 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;3227211179;1.20-unstable_svn;9127;-->

2014/03/25 21:14:40 78BD98 h WARNING: Your http disk template /usr/local/etc/picons/READERS.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20-unstable_svn,r8938). Please consider upgrading it!

2014/03/25 21:14:40 78BD98 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;1400470567;1.20-unstable_svn;9127;-->

2014/03/25 21:14:40 78BD98 h WARNING: Your http disk template /usr/local/etc/picons/READERSBIT.tpl was created for an older revision of OSCam and was changed in original OSCam (1.20-unstable_svn,r7825). Please consider upgrading it!

2014/03/25 21:14:40 78BD98 h If you are sure that it is current, add the following line at the beginning of the template to suppress this warning: <!--OSCam;1112238675;1.20-unstable_svn;9127;-->

2014/03/25 21:14:40 78BD98 h HTTP Server running. ip=192.168.178.10 port=16002

2014/03/25 21:14:40 DC0788 h HTTP Server couldn't bind on port 16002 (errno=98 Address already in use). Not starting HTTP!

2014/03/25 21:14:40 DB2560 r SkyV14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2014/03/25 21:14:41 78A098 r SkyV14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2014/03/25 21:14:41 DB2560 r SkyV14 [mouse] card detected

2014/03/25 21:14:41 78A098 r SkyV14 [mouse] card detected

2014/03/25 21:14:42 DB2560 r SkyV14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/03/25 21:14:42 DB2560 r SkyV14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/03/25 21:14:42 DB2560 r SkyV14 [mouse] Setting baudrate to 38400 bps

2014/03/25 21:14:42 DB2560 r SkyV14 [mouse] Calculated work ETU is 26.05 us

2014/03/25 21:14:43 DB2560 r SkyV14 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)

2014/03/25 21:14:43 78A098 r SkyV14 [mouse] ATR: F8 00

2014/03/25 21:14:43 78A098 r SkyV14 [mouse] ERROR: Could not read reader->convention

2014/03/25 21:14:43 78A098 r SkyV14 [mouse] Error activating card.

2014/03/25 21:14:44 78A098 r SkyV14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/03/25 21:14:44 78A098 r SkyV14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/03/25 21:14:44 78A098 r SkyV14 [mouse] Setting baudrate to 38400 bps

2014/03/25 21:14:44 78A098 r SkyV14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357

2014/03/25 21:14:44 78A098 r SkyV14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2014/03/25 21:14:45 DB2560 r SkyV14 [mouse] Card type: P1TV

2014/03/25 21:14:45 DB2560 r SkyV14 [mouse] Rom version: 20AA

2014/03/25 21:14:45 78A098 r SkyV14 [mouse] card system not supported

2014/03/25 21:14:45 78A098 r SkyV14 [mouse] Normal mode failed, reverting to Deprecated Mode

2014/03/25 21:14:46 DB2560 r SkyV14 [mouse] classD1 ins58: failed

2014/03/25 21:14:46 DB2560 r SkyV14 [mouse] card system not supported

2014/03/25 21:14:46 DB2560 r SkyV14 [mouse] Normal mode failed, reverting to Deprecated Mode

2014/03/25 21:15:13 78A098 r SkyV14 [mouse] ATR: 69 00

2014/03/25 21:15:13 78A098 r SkyV14 [mouse] ERROR: Could not read reader->convention

2014/03/25 21:15:13 78A098 r SkyV14 [mouse] Error activating card.

2014/03/25 21:15:14 DB2560 r SkyV14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/03/25 21:15:14 DB2560 r SkyV14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/03/25 21:15:14 DB2560 r SkyV14 [mouse] Calculated work ETU is 104.20 us

2014/03/25 21:15:14 DB2560 r SkyV14 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)

2014/03/25 21:15:15 DB2560 r SkyV14 [mouse] card system not supported

2014/03/25 21:15:15 DB2560 r SkyV14 [mouse] card initializing error

2014/03/25 21:15:16 0 s init for all local cards done

2014/03/25 21:15:16 0 s anti cascading disabled

2014/03/25 21:15:17 78A098 r SkyV14 [mouse] ATR: 3F FD 00 13 25 02 40 50 80 02 E0 41 B0 02 40 69 FF 4A 50 F0

2014/03/25 21:15:17 78A098 r SkyV14 [mouse] Warning: D=0 is invalid, forcing D=1

2014/03/25 21:15:17 78A098 r SkyV14 [mouse] Init card protocol T2, FI=0, F=372, D=1, N=37

2014/03/25 21:15:17 78A098 r SkyV14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357

2014/03/25 21:15:17 78A098 r SkyV14 [mouse] ERROR: Parse_ATR returned error

2014/03/25 21:15:17 78A098 r SkyV14 [mouse] Error activating card.

2014/03/25 21:15:19 78A098 r SkyV14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/03/25 21:15:19 78A098 r SkyV14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/03/25 21:15:19 78A098 r SkyV14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357

2014/03/25 21:15:19 78A098 r SkyV14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2014/03/25 21:15:23 78A098 r SkyV14 [mouse] card system not supported

2014/03/25 21:15:23 78A098 r SkyV14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1

2014/03/25 21:15:23 78A098 r SkyV14 [mouse] card initializing error

2014/03/25 21:15:23 0 s init for all local cards done

2014/03/25 21:15:23 0 s anti cascading disabled

damit es mal wieder nach oben kommt. sorry wenn ich nerve.

 

[mxer]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Nervst nicht.
Wir haben ja auf Feedback gewartet, wie es nun geht oder eben leider nicht.

Hast Du den Reader am Hub oder direkt angesteckt?

 

[Akiviech]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Hi der Reader ist direkt angesteckt.

Habe inzwischen auch gesehen das ich oscam und doscam gleichzeitig gestartet hatte. das hab ich nun mal korrigiert und nur doscam gestartet. nun sieht das Log eigentlich ziemlich gut aus (glaube ich). allerdings will meine Client (Gigablue HD 800 UE Plus mit OpenATV 4.0) sich nicht verbinden.

Spoiler

-------------------------------------------------------------------------------

>> DOSCam << started at Tue Mar 25 21:28:07 2014

-------------------------------------------------------------------------------

2014/03/25 21:28:07 0 s >> DOSCam << started, V0.18 (arm-bcm2708hardfp-linux-gnueabi-libusb)

2014/03/25 21:28:07 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 2040

2014/03/25 21:28:07 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled

2014/03/25 21:28:07 0 s signal handling initialized

2014/03/25 21:28:07 0 s LED support is not active. Can't detect machine type.

2014/03/25 21:28:07 0 s monitor: initialized (fd=5, port=988, ip=192.168.178.10)

2014/03/25 21:28:07 0 s cccam (used for zeroconf): initialized (fd=6, port=21526, ip=192.168.178.10)

2014/03/25 21:28:07 0 s SkyV14 [mouse] creating thread for device /dev/ttyUSB0

2014/03/25 21:28:07 0 s EMU [constcw] creating thread for device /usr/local/etc/SoftCam.Key

2014/03/25 21:28:07 0 s loadbalancer: can't read from file /tmp/.doscam/stat

2014/03/25 21:28:07 0 s waiting for local card init

2014/03/25 21:28:07 1EB3120 p EMU [constcw] proxy initialized, server /usr/local/etc/SoftCam.Key:0

2014/03/25 21:28:07 1EBF788 h webif: decompressed 53348 bytes back into 153928 bytes

2014/03/25 21:28:07 1EBF788 h HTTP Server running. ip=192.168.178.10 port=16002

2014/03/25 21:28:07 1EB1560 r SkyV14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2014/03/25 21:28:08 1EB1560 r SkyV14 [mouse] card detected

2014/03/25 21:28:09 1EB1560 r SkyV14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/03/25 21:28:09 1EB1560 r SkyV14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2

2014/03/25 21:28:09 1EB1560 r SkyV14 [mouse] Setting baudrate to 38400 bps

2014/03/25 21:28:09 1EB1560 r SkyV14 [mouse] Calculated work ETU is 26.05 us

2014/03/25 21:28:09 1EB1560 r SkyV14 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)

2014/03/25 21:28:11 1EB1560 r SkyV14 [mouse] Card type: P1TV

2014/03/25 21:28:11 1EB1560 r SkyV14 [mouse] Rom version: 20AA

2014/03/25 21:28:11 1EB1560 r SkyV14 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15

2014/03/25 21:28:11 1EB1560 r SkyV14 [mouse] found card system videoguard2

2014/03/25 21:28:11 1EB1560 r SkyV14 [videoguard2] card detected

2014/03/25 21:28:11 1EB1560 r SkyV14 [videoguard2] type: VideoGuard Sky Germany (098C)

2014/03/25 21:28:12 0 s init for all local cards done

2014/03/25 21:28:12 0 s anti cascading disabled

2014/03/25 21:28:29 1EB1560 r SkyV14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2014/03/25 21:28:29 1EB1560 r SkyV14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2

2014/03/25 21:28:29 1EB1560 r SkyV14 [mouse] Setting baudrate to 153600 bps

2014/03/25 21:28:29 1EB1560 r SkyV14 [mouse] Calculated work ETU is 6.51 us

2014/03/25 21:28:30 1EB1560 r SkyV14 [mouse] ATR Fsmax is: 5 MHz, clocking card to wanted user cardspeed of 3.57 MHz (specified in reader->mhz)

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] Card type: P1TV

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] Rom version: 20AA

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] parental lock setting: FF FF FF FF

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] parental lock disabled

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] parental lock setting after disabling: FF FF FF FF

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] serial: ########, BoxID: ########, baseyear: 2004

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] ready for requests

2014/03/25 21:28:31 1EB1560 r SkyV14 [mouse] found card system videoguard2

2014/03/25 21:28:31 1EB1560 r SkyV14 [videoguard2] card detected

2014/03/25 21:28:31 1EB1560 r SkyV14 [videoguard2] type: VideoGuard Sky Germany (098C)

oscam.user

Spoiler

[account]

user = user

pwd = 123456

caid = 098C

au = SkyV14

group = 1

 

[mxer]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Die Karte rennt aber schonmal :good:
Was ist auf dem Client: CCcam oder oscam?

 

[Akiviech]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Auf dem Client ist CCcam 2.3.0

Die c-Line ist C: 192.168.178.10 12345 user 123456

die Datei heißt CCcam.cfg

 

[mxer]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Meldet der sich am Server an?
War vorhin nix im Log zu sehen.

 

[Akiviech]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Genau das ist mein Problem. Nix zu sehen vom Client.

 

[dodo83]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

im netzwerk ist der Client aber, sprich hat Inet zugang?

 

[Akiviech]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

An der Fitzbox zu sehen und per ssh und WinSCP ansprechbar.

 

[dodo83]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Die cccam.cfg ist auch in dem richtigem pfad abgelegt

Gesendet von meinem GT-I9105P

 

[Akiviech]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Da wo die CCcam_sample.cfg war. Kann jetzt leider nicht nachschauen.

 

[mxer]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Wenn der Client nicht am Server ankommt, im Netz aber zu sehen ist, mal die Ports prüfen.
Zahlendreher sind da gern mal dabei.
Ist nämlich der Port falsch, sieht man das im Log nicht.
Ist der Name oder PWD falsch, sieht man das im Log.

 

[Akiviech]

AW: Sky V13 Oscam Easymouse2 Raspbian läuft nicht

Danke für den Tipp, werde es heut Mittag gleich mal überprüfen und melde mich dann wieder.

-----

Juhu ich habs. Der CCcam Server war nicht korrekt definiert. Ich bedanke mich sehr für eure Hilfe, ohne euch hätte ich den Mut verloren!