Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

[4gx35]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

hattest du schon cardmhz=2700 und mhz=1 versucht, ist standard für mips boxen interne reader

 

[don_bol]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

Nein, das hatte ich noch nicht. Probiere ich direkt mal aus.

- - - - - - - - - -

funktioniert auch nicht...

 

[don_bol]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

bekomme es mit der easymouse nicht hin

oscam.server

Spoiler

[reader]
label = v23
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 098E
boxid = 12345678
ins7e11 = 14
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

 

[4gx35]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

ins7e11=14 und ndsversion=2 ist normalerweise nicht notwendig
mouse dipschalter 3+4 oben ??? 3,3V ? phoenix ??

ansonsten mal mit mhz=357 und cardmhz=357 versuchen, aber mouse dipschalter 3+4 unten,

(intern wäre dies mit beiden 357 auch zu versuchen + autospeed=0)

ansonsten oscam webif aufrufen, unter files-logfile oben clear log machen,
danach oscam restart und logfile aus dem webif posten

 

[don_bol]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

habe oscam.server korrigiert:

Spoiler

[reader]
label = v23
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 098E
boxid = 12345678
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1

Easymuse Dippschalter: 3,3V, Phoenix, unten, oben

 

[4gx35]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

muss für 6mhz oben oben sein !!!

 

[don_bol]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

Leider keine Änderung

 

[4gx35]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

du solltest ein log posten, es kann doch nicht sein, dass die karte weder intern noch mit easymouse nicht läuft,

es wird nicht hell, falls sie noch nicht aktiviert wurde oder funktionierte sie intern schon mal ?

 

[don_bol]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

anbei ein log:

Spoiler

• 2015/08/18 20:00:43 7207A7C9 h (webif) webif: decompressed 163435 bytes back into 391368 bytes
• 2015/08/18 20:00:43 7207A7C9 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2015/08/18 20:00:43 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 78504
• 2015/08/18 20:00:43 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 76055
• 2015/08/18 20:00:43 778DA102 r (reader) v23 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
• 2015/08/18 20:00:43 778DA102 r (reader) v23 [mouse] card detected
• 2015/08/18 20:00:44 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 76015
• 2015/08/18 20:00:45 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75994
• 2015/08/18 20:00:53 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75678
• 2015/08/18 20:00:54 778DA102 r (reader) v23 [mouse] Error activating card.
• 2015/08/18 20:00:55 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 76057
• 2015/08/18 20:00:56 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75947
• 2015/08/18 20:00:57 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75987
• 2015/08/18 20:00:58 778DA102 r (reader) v23 [mouse] Error activating card.
• 2015/08/18 20:00:59 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 76003
• 2015/08/18 20:01:00 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 76004
• 2015/08/18 20:01:01 778DA102 r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75985
• 2015/08/18 20:01:02 778DA102 r (reader) v23 [mouse] Error activating card.
• 2015/08/18 20:01:03 778DA102 r (reader) v23 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/08/18 20:01:03 778DA102 r (reader) v23 [mouse] card initializing error
• 2015/08/18 20:01:04 00000000 s (main) init for all local cards done
• 2015/08/18 20:01:04 00000000 s (anticasc) anti cascading disabled
• 2015/08/18 20:01:04 135BCA37 c (client) plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
• 2015/08/18 20:01:04 135BCA37 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
• 2015/08/18 20:01:04 135BCA37 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
• 2015/08/18 20:01:07 135BCA37 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1850 ECM_PID: 195A PROVID: 000000
• 2015/08/18 20:01:07 135BCA37 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1835 ECM_PID: 1B5A PROVID: 000000
• 2015/08/18 20:01:07 135BCA37 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1838 ECM_PID: 1C5A PROVID: 000000
• 2015/08/18 20:01:07 135BCA37 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1831 ECM_PID: 1D5A PROVID: 000000
• 2015/08/18 20:01:07 135BCA37 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 098E ECM_PID: 1E5A PROVID: 000000
• 2015/08/18 20:01:07 135BCA37 c (dvbapi) Demuxer 0 found 5 ECMpids and 4 STREAMpids in PMT
• 2015/08/18 20:01:07 135BCA37 c (dvbapi) Demuxer 0 serving srvid 0070 (1850@000000:0070 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0061
• 2015/08/18 20:01:07 135BCA37 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2015/08/18 20:01:11 135BCA37 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/08/18 20:02:26 135BCA37 c (-) -- Skipped 14 duplicated log lines --
• 2015/08/18 20:03:26 135BCA37 c (-) -- Skipped 12 duplicated log lines --
• 2015/08/18 20:04:26 135BCA37 c (-) -- Skipped 12 duplicated log lines --
• 2015/08/18 20:05:26 135BCA37 c (-) -- Skipped 12 duplicated log lines --

Die Karte funktioniert im sky receiver!

 

[4gx35]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

karte richtig herum in der mouse ? mal umdrehen

log ist nicht vom oscam start an, wie ich vorher beschrieben hatte
das istgarantiert nur aus livelog

 

[don_bol]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

ja ist aus livelog

 

[4gx35]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

dann beachte post #49

du kannst es auch mit mhz 357 testen und mal mit 5Volt

 

[don_bol]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

Habe Einstellung aus Post49 übernommen und nach Neustart folgenden Log erhalten:

Spoiler

2015/08/18 20:35:36 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10940 (mipsel-openpli40-linux-gnu-libusb)
2015/08/18 20:35:36 00000000 s (main) System name = Linux
2015/08/18 20:35:36 00000000 s (main) Host name = et9x00
2015/08/18 20:35:36 00000000 s (main) Release = 3.8.7
2015/08/18 20:35:36 00000000 s (main) Version = #1 SMP Fri Aug 7 15:18:54 CEST 2015
2015/08/18 20:35:36 00000000 s (main) Machine = mips
2015/08/18 20:35:36 00000000 s (main) Stb model = dm800se
2015/08/18 20:35:36 00000000 s (main) Stb boxtype = et9500
2015/08/18 20:35:36 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2084
2015/08/18 20:35:36 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/08/18 20:35:36 00000000 s (main) signal handling initialized
2015/08/18 20:35:37 00000000 s (config) 486 service-id's loaded in 23 ms
2015/08/18 20:35:37 00000000 s (net) cccam: initialized (fd=5, port=12000)
2015/08/18 20:35:37 00000000 s (reader) v23 [mouse] creating thread for device /dev/ttyUSB0
2015/08/18 20:35:37 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/08/18 20:35:37 00000000 s (main) waiting for local card init
2015/08/18 20:35:37 1BF2BDE5 h (webif) webif: decompressed 163435 bytes back into 391368 bytes
2015/08/18 20:35:37 1BF2BDE5 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/08/18 20:35:37 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75846
2015/08/18 20:35:37 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 76024
2015/08/18 20:35:37 256A7EBC r (reader) v23 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/08/18 20:35:38 256A7EBC r (reader) v23 [mouse] card detected
2015/08/18 20:35:38 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 76042
2015/08/18 20:35:39 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75888
2015/08/18 20:35:40 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75984
2015/08/18 20:35:41 256A7EBC r (reader) v23 [mouse] Error activating card.
2015/08/18 20:35:42 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 76046
2015/08/18 20:35:43 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75989
2015/08/18 20:35:44 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75790
2015/08/18 20:35:45 256A7EBC r (reader) v23 [mouse] Error activating card.
2015/08/18 20:35:46 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75954
2015/08/18 20:35:47 256A7EBC r (reader) v23 [mouse] Buffers readed 0 bytes total time_us 75982
2015/08/18 20:35:49 256A7EBC r (-) -- Skipped 1 duplicated log lines --
2015/08/18 20:35:49 256A7EBC r (reader) v23 [mouse] Error activating card.
2015/08/18 20:35:50 256A7EBC r (reader) v23 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/08/18 20:35:50 256A7EBC r (reader) v23 [mouse] card initializing error
2015/08/18 20:35:51 00000000 s (main) init for all local cards done
2015/08/18 20:35:51 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/08/18 20:35:51 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/08/18 20:35:51 00000000 s (anticasc) anti cascading disabled
2015/08/18 20:35:51 5DA00268 c (client) plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2015/08/18 20:35:51 5DA00268 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2015/08/18 20:35:51 5DA00268 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/08/18 20:35:52 5DA00268 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1850 ECM_PID: 195A PROVID: 000000
2015/08/18 20:35:52 5DA00268 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1835 ECM_PID: 1B5A PROVID: 000000
2015/08/18 20:35:52 5DA00268 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1838 ECM_PID: 1C5A PROVID: 000000
2015/08/18 20:35:52 5DA00268 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1831 ECM_PID: 1D5A PROVID: 000000
2015/08/18 20:35:52 5DA00268 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 098E ECM_PID: 1E5A PROVID: 000000
2015/08/18 20:35:52 5DA00268 c (dvbapi) Demuxer 0 found 5 ECMpids and 4 STREAMpids in PMT
2015/08/18 20:35:52 5DA00268 c (dvbapi) Demuxer 0 serving srvid 0070 (1850@000000:0070 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0061
2015/08/18 20:35:52 5DA00268 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!

 

[4gx35]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

v23 [mouse] Error activating card.

alle möglichkeiten testen und selbst immer im log nachsehen

 

[don_bol]

AW: Sky/Unitymedia V23 Smartcard im Xtrend ET9500 erhellen

Ja super...