Server gewechselt, CS nach außen geht nicht

[Rizzitelli]

AW: Server gewechselt, CS nach außen geht nicht

Von den Clienten von außen kommen keine anfragen.
Von meinen boxen über die Server IP kommen anfragen.

- - - - - - - - - -

Spoiler

2013/10/07 20:42:27 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8959 (i486-linux-gnu)
2013/10/07 20:42:27 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 24782
2013/10/07 20:42:27 0 s services reloaded: 0 services freed, 29 services loaded, rejected 0
2013/10/07 20:42:27 0 s userdb reloaded: 9 accounts loaded, 0 expired, 0 disabled
2013/10/07 20:42:27 0 s signal handling initialized
2013/10/07 20:42:27 0 s 328 service-id's loaded in 4ms
2013/10/07 20:42:27 0 s 133 tier-id's loaded
2013/10/07 20:42:27 0 s 3 provid's loaded
2013/10/07 20:42:27 0 s 1674 entries read from oscam.whitelist
2013/10/07 20:42:27 0 s cccam: initialized (fd=4, port=12222)
2013/10/07 20:42:27 0 s SKY [smartreader] creating thread for device Serial:Reader 8C29AFA
2013/10/07 20:42:27 0 s SKY_HD [smartreader] creating thread for device Serial:Reader 3883F0C
2013/10/07 20:42:27 0 s SKY_ITALIA [mouse] creating thread for device /dev/ttyUSB1
2013/10/07 20:42:27 0 s HD01 [mouse] creating thread for device /dev/ttyUSB3
2013/10/07 20:42:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/10/07 20:42:27 0 s waiting for local card init
2013/10/07 20:42:27 9635528 r SKY_HD [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/10/07 20:42:27 9645248 h webif: decompressed 54245 bytes back into 154648 bytes
2013/10/07 20:42:27 9645248 h HTTP Server running. ip=0.0.0.0 port=8888
2013/10/07 20:42:27 9635528 r Found reader with serial Reader 3883F0C at 001:008
2013/10/07 20:42:27 9635528 r Found smartreader device Serial:Reader 3883F0C
2013/10/07 20:42:27 96337A8 r SKY [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/10/07 20:42:27 9635528 r SKY_HD [smartreader] Reader initialized (device=Serial:Reader 3883F0C, detect=cd, mhz=500, cardmhz=357)
2013/10/07 20:42:27 96337A8 r Found reader with serial Reader 8C29AFA at 001:006
2013/10/07 20:42:27 96337A8 r Found smartreader device Serial:Reader 8C29AFA
2013/10/07 20:42:27 96337A8 r SKY [smartreader] Reader initialized (device=Serial:Reader 8C29AFA, detect=cd, mhz=600, cardmhz=600)
2013/10/07 20:42:27 96372A8 r SKY_ITALIA [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2013/10/07 20:42:28 9639028 r HD01 [mouse] Reader initialized (device=/dev/ttyUSB3, detect=cd, mhz=368, cardmhz=368)
2013/10/07 20:42:28 9639028 r HD01 [mouse] card detected
2013/10/07 20:42:30 9639028 r HD01 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2013/10/07 20:42:30 9639028 r HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/10/07 20:42:30 9639028 r HD01 [mouse] Setting baudrate to 115200 bps
2013/10/07 20:42:30 9639028 r HD01 [mouse] Calculated work ETU is 8.70 us
2013/10/07 20:42:30 9639028 r HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed of 3.68 MHz (specified in reader->mhz)
2013/10/07 20:42:30 9639028 r HD01 [mouse] Card responded ok for ifsd request of 251
2013/10/07 20:42:31 9639028 r HD01 [mouse] detect native nagra card
2013/10/07 20:42:32 9639028 r HD01 [mouse] found card system nagra
2013/10/07 20:42:32 9639028 r HD01 [nagra] ROM: D N A S P 1 4 2
2013/10/07 20:42:32 9639028 r HD01 [nagra] REV: R e v G C 6
2013/10/07 20:42:32 9639028 r HD01 [nagra] SER: ############
2013/10/07 20:42:32 9639028 r HD01 [nagra] CAID: 1830
2013/10/07 20:42:32 9639028 r HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2013/10/07 20:42:32 9639028 r HD01 [nagra] Prv.ID: 00 00 00 00
2013/10/07 20:42:32 9639028 r HD01 [nagra] IRD ID: ############
2013/10/07 20:42:32 9639028 r HD01 [nagra] active to: 2013/11/27 11:59
2013/10/07 20:42:32 9639028 r HD01 [nagra] -----------------------------------------
2013/10/07 20:42:32 9639028 r HD01 [nagra] |id |tier |valid from |valid to |
2013/10/07 20:42:32 9639028 r HD01 [nagra] +----+--------+------------+------------+
2013/10/07 20:42:32 9639028 r HD01 [nagra] |8011|0064 |2010/04/08 |2011/04/09 |
2013/10/07 20:42:32 9639028 r HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2013/10/07 20:42:32 9639028 r HD01 [nagra] |8011|0BEA |2011/04/09 |2014/11/10 |
2013/10/07 20:42:32 9639028 r HD01 [nagra] -----------------------------------------
2013/10/07 20:42:32 9639028 r HD01 [nagra] ready for requests
2013/10/07 20:42:33 0 s init for all local cards done
2013/10/07 20:42:33 0 s anti cascading disabled
2013/10/07 20:42:33 964F418 c anonymous disconnected from 192.168.178.61
2013/10/07 20:42:33 9652DF8 c encrypted cccam-client 192.168.178.56 granted (kumpel1, au=auto (4 reader))
2013/10/07 20:42:33 9654AE8 c encrypted cccam-client 192.168.178.61 granted (kueche, au=auto (4 reader))
2013/10/07 20:42:33 9651108 c encrypted cccam-client 192.168.178.58 granted (server, au=auto (4 reader))

Ist der Rotmarkierte eintrag richtig?

 

[bombadil]

AW: Server gewechselt, CS nach außen geht nicht

Moin,

ist deine Dyndns noch aktuell?

Grüße
Bombadil

 

[Rizzitelli]

AW: Server gewechselt, CS nach außen geht nicht

Die ist noch Aktuell. Sonst würde es mit der D-Box auch nicht gehen.

 

[Rizzitelli]

So freunde, es geht. Nach ca. 5 Neustarts des Routers, gehts jetzt.
Keine Ahnung warum das gehangen hat?

Warum nimmt die Oscam den Port 12000 nicht an?
Wenn ich den in der oscam.conf von 12222 auf 12000 ändere, sagt mir das Logfile das es die 12000 schon vergeben hat und alle clienten werden dunkel.
Kann man das abstellen? Dann bräuchte ich bei den Clienten die etwas weiter weg wohnen nichts umstellen.

Sie müssen registriert sein, um Links zu sehen.