Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

    Nobody is reading this thread right now.
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

Brauchst nur auf der Hauptseite von OScam,dort wo Status OK steht mit der Maus auf Entitlemente gehen,sollte dann angezeigt werden,ansonsten über Reader
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

Hallo cojo,

habe gestern noch ewig rumgedoktort und bin dann in die Koje.

Schreibe jetzt aus dem Büro und dem Gedächtnis - bei dem einem Fenster (grau) da stand zu den Daten der Karte meist n/a also stehen keine Daten zur Verfügung und auf der Hauptseite (Status) da ist die Karte aufgelistet und weiter rechts in der Zeile stand bei Status no entitlement => klar dass die Karte nicht funktionieren kann

Leider wird kein emm.log gesichert, weiß der Teufel warum. Habe die Ratschläge hier beherzigt, dann die Box neu gestartet, den Reader neu gestartet, online einen Freischaltcode angefordert, gewartet, dass die Emm geschickt werden und eventuell eine emm.log geschrieben wird, aber der Pfad /var/log/ipc oder unter /var/keys blieb leer bzw. dort wurde nirgends eine emm.log geschrieben.

Habe heute weiter gegoogelt und da kam mitr nachfolgende Idee:

Was wenn ich temporär meine oscam.server dahingehend verändere (im Moment ist alles geblockt)?

blockemm-u = 0
blockemm-s = 1
blockemm-g = 1
blockemm-unknown = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255

dann mich wieder online freischalte (geht ja recht bequem) und nachdem dann die Freischaltung (hoffentlich) geklappt hat, wieder alles blocke?

Müsste eigentlich bei einem kleinen Restrisiko funktionieren, oder?

Danke für Eure Hilfe.

Nachtrag: Eventuell wird kein Emm.log geschrieben, weil die Rechte in dem Ordner nicht auf 755 stehen, würde mich aber wundern, da bis zum 27.07.2014 die emm.log geschrieben wurde?
 
Zuletzt bearbeitet:
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

dann lass den pfad mal ganz leer,speichere das dann und starte den ganzen server neu,nicht nur oscam
Du hast auch mind 1 std auf Sky Krimi oder so gelassen?
Dein User hat auch AU = sky_v14 drin stehen?
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

Werde ich machen - lösche alles raus (hatte ich auch schon gemacht), speicher es ab, schalte die Box aus, nimm sie vom Strom, lösche den Speicher, starte die Box dann neu
Hatte es auf Sky Cinema gestellt, muss ja ein Sender sein für den ich freigeschaltet bin
in meiner oscam.user steht unter anderem:
au = V14
cccignorereshare = 1
betatunnel = 1833.FFFF:1702

Nachtrag:
Vergleiche gerade meine oscams mit Deinen aus dem Link. Was mir aufgefallen ist: In meiner oscam.cofig steht unter [global] disablelog = 1, ist damit nicht das log ausgeschaltet?
 
Zuletzt bearbeitet:
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

am besten immer sky krimi oder sky sport news hd


da stimmt aber auch was mit deiner config nicht!
was soll der betatunnel da drin?

dein user muss so aussehen

user = root
au = sky_v14
group = 1
Zum Vergrößern anklicken....

poste mal oscam,conf /oscam.server /oscam.dvbapi /oscam.user


lies mal meine signatur,noch einfach gehts eigentlich nicht
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

ok - gehe auch auf Sky Krimi

Das mit dem betatunnel habe ich auch irgendwo gelesen, dass man diesen nicht braucht und rausschmeißen kann

Mein user habe ich soeben auch überprüft: Im server steht unter [reader] label = sky_v14 und im user nur V14, vielleicht passt das ja nicht?

oscam.conf:
[global]
disablelog = 1
logfile = stdout
clienttimeout = 7000
nice = -1
waitforcards_extra_delay = 700
readerrestartseconds = 7
usrfile = /tmp/oscamuser.log
cwlogdir = /tmp/oscam/cw
emmlogdir = /var/log/ipc/

[cs357x]
port = 13000
suppresscmd08 = 1

[cs378x]
port = 13001
suppresscmd08 = 1

[newcamd]
port = 13002@0000:013002
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 1

[cccam]
port = 12000
nodeid = 04FF18E110B814F8
version = 2.3.0
reshare = 10
reshare_mode = 4
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

[dvbapi]
enabled = 1
au = 1
reopenonzap = 1
user = root
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 120
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
oscam.server
[reader]
label = sky_v14
protocol = internal
device = /dev/sci0
mhz = 1
cardmhz = 2700
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-g = 1
saveemm-u = 1
#blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
ndsversion = 2
oscam.dvbapi
P: 098C
I: 0
oscam.user
hier kann ich wohl die ganzen accounts rausschmeißen, da nur ich die Karte nutze
[account]
user = root
pwd = root
group = 1,2,3,4,5,6,7,8,9,10,62,63,64
au = V14
cccignorereshare = 1
betatunnel = 1833.FFFF:1702

[account]
user = name1
pwd = pass1
disabled = 1
group = 1,2,3,4,5,6,7,8,9,10,62,63,64
au = V14
cccignorereshare = 1

[account]
user = name2
pwd = pass2
disabled = 1
group = 1,2,3,4,5,6,7,8,9,10,62,63,64
au = V14
cccignorereshare = 1

[account]
user = name3
pwd = pass3
disabled = 1
group = 1,2,3,4,5,6,7,8,9,10,62,63,64
au = V14
cccignorereshare = 1
Deine Signatur habe ich bereits vorhin durchgelesen, die oscams ausgedruckt und mit meinen verglichen und die Unterschiede markiert. Deine Anleitung ich auch ausgedruckt
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

dvbapi bitte so
P: 098C 1
I: 0
Zum Vergrößern anklicken....

Dein blöder Betatunnel hat absolut NICHT mit einer v14 zu tun,der ist von einer S02,weg damit

Ich denke du hast alles gelesen? das stimmt ja hinten und vorne nicht beim user!

Was sollen Reader 1-64 da?

So muss es aussehen
[account]
user = root
pwd =
group = 1
au = sky_v14
Zum Vergrößern anklicken....


wenn du keine weitern user dran hängen hast,lösche den kram,nur die rein die du auch hast

oscam.config so

brauchst du newcamd? wenn nicht,weg damit


Wenn du nur selber schauen willst,ohne sharen,kannst du meine config 1:1 übernehmen,nur den emm speicherpfad ändern oder ganz leer klassen
 
Zuletzt bearbeitet:
Danke

ich habe die unbearbeiteten oscams von gestern Abend eingestellt, damit der Wurm erkennbar wird - nicht die, die ich bereits teilweise entsprechend Deiner Signatur korrigiert hatte.

Habe unter oscam.config auch [cccam] rausgeschmissen, weil ich die Karte nicht sharen will und wohlmöglich brauche ich die [cs357x] und [cs378x] auch nicht. [erledigt, config 1:1 übernommen]

Nachtrag:
Oh Gott, Herr schmeiß Hirn ra! Arbeiten und gleichzeitig Oscam konfigurieren funktioniert nicht, zu leicht überliest man was - sorry!

Ich bin am Verzweifeln - wohlmöglich bin ich zu blöd.

Bitte wirklich nochmal um Hilfe und so wie es aussieht liegt das Problem irgendwo zwischen DDVBapi, Karte und Reader, denn im Log taucht irgendwan die Meldung auf "no matching reader" auf, auch werden immer noch keine emms.log gesaved/geschrieben, trotz dass ich alle Tipps beherzigt habe.

ich poste nochmal alle oscams und ein livelog nach Kartenrestart.
oscam.version:
Unix starttime: 1406961438
Starttime: 02.08.2014 08:37:18
Version: oscam-1.20-unstable_svn-r9612
Compiler: sh4-streamboard-linux-gnu
ConfigDir: /var/keys/

Web interface support: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
Anti-cascading support: yes
Irdeto guessing: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
IPv6 support: no
Emulator support: yes
Clockfix with realtime clock: yes
Cache exchange support: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
Pandora: yes
ghttp: yes
gbox: yes
radegast: yes
serial: yes
constant CW: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes
oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9612
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[global]
logfile = stdout
disableuserfile = 0
clienttimeout = 7000
nice = -1
maxlogsize = 20
waitforcards_extra_delay = 700
readerrestartseconds = 7
usrfile = /tmp/oscamuser.log
cwlogdir = /tmp/oscam/cw

[cache]

[dvbapi]
enabled = 1
au = 1
user = root
boxtype = dreambox

[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15

[webif]
httpport = 8888
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 15
oscam.user
[account]
user = root
pwd = root
group = 1
au = sky_v14
oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9612
# Read more:
Sie müssen registriert sein, um Links zu sehen.


[reader]
label = sky_v14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
#blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-25
saveemm-u = 1
saveemm-g = 1
ndsversion = 2
oscam.dvbapi
P: 098C 1
I: 0
livelog aus webif nach fastreset
2/08/2014 08:42:51 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:51 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:52 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:52 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:52 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:52 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:53 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:53 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:53 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:53 509618 r sky_v14 [internal] card system not supported
2/08/2014 08:42:53 509618 r sky_v14 [internal] Normal mode failed, reverting to Deprecated Mode
2/08/2014 08:42:53 509618 r sky_v14 [internal] Doing fast reset
2/08/2014 08:42:54 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:54 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:54 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:55 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:55 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:55 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:55 509618 r sky_v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 08:42:55 509618 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2/08/2014 08:42:55 509618 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 08:42:55 509618 r sky_v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2/08/2014 08:42:56 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:56 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:56 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:56 509618 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 08:42:57 4FFFD8 h Reader sky_v14 restarted by WebIF from 192.168.2.102
2/08/2014 08:42:57 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:57 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:57 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:57 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:58 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:58 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:58 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:59 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:42:59 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:42:59 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:00 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:00 509618 r sky_v14 [internal] card system not supported
2/08/2014 08:43:00 509618 r sky_v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2/08/2014 08:43:00 509618 r sky_v14 [internal] card initializing error
2/08/2014 08:43:00 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:00 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:01 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:01 509618 r sky_v14 [internal] creating thread for device /dev/sci0
2/08/2014 08:43:01 50B310 r sky_v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2/08/2014 08:43:01 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:01 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:01 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:02 50B310 r sky_v14 [internal] card detected
2/08/2014 08:43:02 50B310 r sky_v14 [internal] Doing fast reset
2/08/2014 08:43:02 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:02 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:02 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:03 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:03 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:03 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:03 50B310 r sky_v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 08:43:03 50B310 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2/08/2014 08:43:03 50B310 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 08:43:03 50B310 r sky_v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2/08/2014 08:43:04 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:04 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:05 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:05 50B310 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 08:43:05 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:05 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:05 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:06 50B310 r sky_v14 [internal] Card type: P1TV
2/08/2014 08:43:06 50B310 r sky_v14 [internal] Rom version: 20AA
2/08/2014 08:43:06 50B310 r sky_v14 [internal] Credit available on card: 0 euro
2/08/2014 08:43:06 50B310 r sky_v14 [internal] Extended 4C detected
2/08/2014 08:43:06 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:06 50B310 r sky_v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2/08/2014 08:43:06 50B310 r sky_v14 [internal] found card system videoguard2
2/08/2014 08:43:06 50B310 r sky_v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2/08/2014 08:43:06 50B310 r sky_v14 [videoguard2] card detected
2/08/2014 08:43:06 50B310 r sky_v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2/08/2014 08:43:06 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:06 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:07 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:07 50B310 r sky_v14 [videoguard2] creating thread for device /dev/sci0
2/08/2014 08:43:07 50DBF8 r sky_v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2/08/2014 08:43:07 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:07 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:08 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:08 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:08 50DBF8 r sky_v14 [videoguard2] card detected
2/08/2014 08:43:08 50DBF8 r sky_v14 [internal] Doing fast reset
2/08/2014 08:43:08 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:08 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:09 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:09 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:09 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:10 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:10 50DBF8 r sky_v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 08:43:10 50DBF8 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2/08/2014 08:43:10 50DBF8 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 08:43:10 50DBF8 r sky_v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2/08/2014 08:43:10 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:10 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:11 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:11 50DBF8 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 08:43:11 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:11 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:12 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:12 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:12 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:13 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:13 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:13 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:14 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:14 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:14 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:14 50DBF8 r sky_v14 [internal] card system not supported
2/08/2014 08:43:14 50DBF8 r sky_v14 [internal] Normal mode failed, reverting to Deprecated Mode
2/08/2014 08:43:14 50DBF8 r sky_v14 [internal] Doing fast reset
2/08/2014 08:43:14 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:15 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:15 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:15 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:16 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:16 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:16 50DBF8 r sky_v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 08:43:16 50DBF8 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2/08/2014 08:43:16 50DBF8 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 08:43:16 50DBF8 r sky_v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2/08/2014 08:43:16 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:17 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:17 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:17 50DBF8 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 08:43:17 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:18 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:18 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:18 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:19 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:19 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:19 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:19 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:20 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:20 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:20 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:20 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:20 50DBF8 r sky_v14 [internal] card system not supported
2/08/2014 08:43:20 50DBF8 r sky_v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2/08/2014 08:43:20 50DBF8 r sky_v14 [internal] card initializing error
2/08/2014 08:43:21 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:21 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:21 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:22 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:22 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:22 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:23 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:23 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:23 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:23 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:24 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:24 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:24 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:25 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:25 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:25 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:26 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:26 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:26 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:26 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:27 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:27 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:27 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:28 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:28 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:28 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:29 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:29 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:29 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:30 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:30 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:30 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:30 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:31 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:31 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:31 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:32 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:32 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:32 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:33 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:33 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:33 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:33 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:34 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:34 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:34 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:35 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:35 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:35 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:36 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:36 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:36 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:37 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:37 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:37 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:37 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:38 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:38 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:38 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:39 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:39 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:39 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:40 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:40 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:40 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:40 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:41 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:41 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:41 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:42 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:42 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 08:43:42 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 08:43:43 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)

ich habe auch Tipps von dodo83 beherzigt, die Karte rausgenommen, die Box neu gebootet, dann die Karte wieder rein aber nichts passiert, auch werden keine logs geschrieben, die ich über filezilla dann ansehen kann. Auch habe ich probiert fußbyte und payload auszulesen, das funktioniert auch nicht bzw. finde ich nicht wonach ich nach
Sie müssen registriert sein, um Links zu sehen.
suchen sollte

payload
2/08/2014 09:00:09 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:10 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:10 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] ATR historicalbytes should be: 13
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Fetching global interface characters for protocol T0
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TA1: 13
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Advertised max cardfrequency is 5.00 (Fmax), frequency divider is 372 (Fi)
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Bitrate adjustment is 4 (D)
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Work ETU = 18.60 us assuming card runs at 5.00 Mhz
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Initial ETU = 74.40 us
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TB1: 25
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TC1: 02
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Extra guardtime of 2 ETU (N)
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TD1 50
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Fetching global interface characters for protocol T0:
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TA2: 80
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Switching between negotiable mode and specific mode is not possible
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Transmission parameters explicitly defined in the interface characters.
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TC2: 0F
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Protocol T0: work wait time is 57600 work etu (WWT)
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Total ATR Length including 13 historical bytes should be 21
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Total protocols in this ATR is 1
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TA1=13 TB1=25 TC1=02 TD1=50 (T0)
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TA2=80 TC2=0F no TD2 means T0
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] 1 protocol types detected. Historical bytes: 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Specific mode: T0, F=372, D=4, N=2
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Protocol: T=0, WWT=57600, Clockrate=4500000
2/08/2014 09:00:10 50F8F0 r sky_v14 [internal] Setting timings: timeout=57600 ETU, block_delay=0 ETU, char_delay=14 ETU
2/08/2014 09:00:10 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:11 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:11 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:11 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:11 50F8F0 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 09:00:12 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:12 50F8F0 50 31 54 56 02 00 41 41 90 00
2/08/2014 09:00:12 50F8F0 r sky_v14 [internal] Card type: P1TV
2/08/2014 09:00:12 50F8F0 r sky_v14 [internal] Rom version: 20AA
2/08/2014 09:00:12 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:12 50F8F0 D0 74 04 80 01
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 13 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 74 04 00 13
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 15 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2/08/2014 09:00:13 50F8F0 00 00 00 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Credit available on card: 0 euro
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 74 16 80 01
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 05 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 74 16 00 05
2/08/2014 09:00:13 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 26 03 3F 00 02 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Extended 4C detected
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 4C 00 00 0E 12 34 56 78 03 00 00 00 44 00 00
2/08/2014 09:00:13 50F8F0 00 00 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 74 03 80 01
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 05 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 74 03 00 05
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 03 03 29 F6 C6 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 74 2B 80 01
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 07 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 74 2B 00 07
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 2B 05 11 12 13 14 15 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:13 50F8F0 D0 7E 11 00 01 15
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] Answer from cardreader:
2/08/2014 09:00:13 50F8F0 90 00
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2/08/2014 09:00:13 50F8F0 r sky_v14 [internal] found card system videoguard2
2/08/2014 09:00:13 50F8F0 r sky_v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2/08/2014 09:00:13 50F8F0 r sky_v14 [videoguard2] card detected
2/08/2014 09:00:13 50F8F0 r sky_v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2/08/2014 09:00:13 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:13 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:13 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:14 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:14 50F8F0 r sky_v14 [videoguard2] creating thread for device /dev/sci0
2/08/2014 09:00:14 50AB18 r sky_v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2/08/2014 09:00:14 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:14 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:15 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:15 50AB18 r sky_v14 [videoguard2] card detected
2/08/2014 09:00:15 50AB18 r sky_v14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2/08/2014 09:00:15 50AB18 r sky_v14 [internal] Doing fast reset
2/08/2014 09:00:15 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:15 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:16 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:16 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:16 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] ATR historicalbytes should be: 13
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Fetching global interface characters for protocol T0
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TA1: 15
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Advertised max cardfrequency is 5.00 (Fmax), frequency divider is 372 (Fi)
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Bitrate adjustment is 16 (D)
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Work ETU = 4.65 us assuming card runs at 5.00 Mhz
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Initial ETU = 74.40 us
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TB1: 25
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TC1: 02
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Extra guardtime of 2 ETU (N)
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TD1 50
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Fetching global interface characters for protocol T0:
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TA2: 80
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Switching between negotiable mode and specific mode is not possible
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Transmission parameters explicitly defined in the interface characters.
2/08/2014 09:00:17 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TC2: 0F
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Protocol T0: work wait time is 230400 work etu (WWT)
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Total ATR Length including 13 historical bytes should be 21
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Total protocols in this ATR is 1
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TA1=15 TB1=25 TC1=02 TD1=50 (T0)
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TA2=80 TC2=0F no TD2 means T0
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] 1 protocol types detected. Historical bytes: 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Specific mode: T0, F=372, D=16, N=2
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Protocol: T=0, WWT=230400, Clockrate=4500000
2/08/2014 09:00:17 50AB18 r sky_v14 [internal] Setting timings: timeout=230400 ETU, block_delay=0 ETU, char_delay=14 ETU
2/08/2014 09:00:17 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:17 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:18 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:18 50AB18 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 09:00:18 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:18 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:19 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:19 50AB18 r sky_v14 [internal] passed history check
2/08/2014 09:00:19 50AB18 r TA1 = 13
2/08/2014 09:00:19 50AB18 r FI = 01
2/08/2014 09:00:19 50AB18 r TA1 = 12
2/08/2014 09:00:19 50AB18 r FI = 01
2/08/2014 09:00:19 50AB18 r TA1 = 13
2/08/2014 09:00:19 50AB18 r FI = 01
2/08/2014 09:00:19 50AB18 r TA1 = 13
2/08/2014 09:00:19 50AB18 r FI = 01
2/08/2014 09:00:19 50AB18 r TA1 = 11
2/08/2014 09:00:19 50AB18 r FI = 01
2/08/2014 09:00:19 50AB18 r TA1 = 11
2/08/2014 09:00:19 50AB18 r FI = 01
2/08/2014 09:00:19 50AB18 r TA1 = 11
2/08/2014 09:00:19 50AB18 r FI = 01
2/08/2014 09:00:19 50AB18 r sky_v14 [internal] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2/08/2014 09:00:19 50AB18 r sky_v14 [internal] forced to NDS2
2/08/2014 09:00:19 50AB18 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:19 50AB18 D0 74 01 80 01
2/08/2014 09:00:19 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:19 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:19 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:20 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:20 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:20 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:21 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:21 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:21 50AB18 r sky_v14 [internal] failed to read 7401 cmd length (00 00)
2/08/2014 09:00:21 50AB18 r sky_v14 [internal] passed history check
2/08/2014 09:00:21 50AB18 r TA1 = 13
2/08/2014 09:00:21 50AB18 r FI = 01
2/08/2014 09:00:21 50AB18 r TA1 = 12
2/08/2014 09:00:21 50AB18 r FI = 01
2/08/2014 09:00:21 50AB18 r TA1 = 13
2/08/2014 09:00:21 50AB18 r FI = 01
2/08/2014 09:00:21 50AB18 r TA1 = 13
2/08/2014 09:00:21 50AB18 r FI = 01
2/08/2014 09:00:21 50AB18 r TA1 = 11
2/08/2014 09:00:21 50AB18 r FI = 01
2/08/2014 09:00:21 50AB18 r TA1 = 11
2/08/2014 09:00:21 50AB18 r FI = 01
2/08/2014 09:00:21 50AB18 r TA1 = 11
2/08/2014 09:00:21 50AB18 r FI = 01
2/08/2014 09:00:21 50AB18 r sky_v14 [internal] card system not supported
2/08/2014 09:00:21 50AB18 r sky_v14 [internal] Normal mode failed, reverting to Deprecated Mode
2/08/2014 09:00:21 50AB18 r sky_v14 [internal] Doing fast reset
2/08/2014 09:00:21 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:22 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:22 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:22 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:22 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:23 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] ATR historicalbytes should be: 13
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Fetching global interface characters for protocol T0
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TA1: 13
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Advertised max cardfrequency is 5.00 (Fmax), frequency divider is 372 (Fi)
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Bitrate adjustment is 4 (D)
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Work ETU = 18.60 us assuming card runs at 5.00 Mhz
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Initial ETU = 74.40 us
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TB1: 25
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TC1: 02
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Extra guardtime of 2 ETU (N)
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TD1 50
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Fetching global interface characters for protocol T0:
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TA2: 80
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Switching between negotiable mode and specific mode is not possible
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Transmission parameters explicitly defined in the interface characters.
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TC2: 0F
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Protocol T0: work wait time is 57600 work etu (WWT)
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Total ATR Length including 13 historical bytes should be 21
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Total protocols in this ATR is 1
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TA1=13 TB1=25 TC1=02 TD1=50 (T0)
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TA2=80 TC2=0F no TD2 means T0
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] 1 protocol types detected. Historical bytes: 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Specific mode: T0, F=372, D=4, N=2
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Protocol: T=0, WWT=14400, Clockrate=4500000
2/08/2014 09:00:23 50AB18 r sky_v14 [internal] Setting timings: timeout=14400 ETU, block_delay=0 ETU, char_delay=14 ETU
2/08/2014 09:00:23 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:24 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:24 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:24 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:24 50AB18 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 09:00:24 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:24 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:25 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:25 50AB18 r sky_v14 [internal] passed history check
2/08/2014 09:00:25 50AB18 r TA1 = 13
2/08/2014 09:00:25 50AB18 r FI = 01
2/08/2014 09:00:25 50AB18 r TA1 = 12
2/08/2014 09:00:25 50AB18 r FI = 01
2/08/2014 09:00:25 50AB18 r TA1 = 13
2/08/2014 09:00:25 50AB18 r FI = 01
2/08/2014 09:00:25 50AB18 r TA1 = 13
2/08/2014 09:00:25 50AB18 r FI = 01
2/08/2014 09:00:25 50AB18 r TA1 = 11
2/08/2014 09:00:25 50AB18 r FI = 01
2/08/2014 09:00:25 50AB18 r TA1 = 11
2/08/2014 09:00:25 50AB18 r FI = 01
2/08/2014 09:00:25 50AB18 r TA1 = 11
2/08/2014 09:00:25 50AB18 r FI = 01
2/08/2014 09:00:25 50AB18 r sky_v14 [internal] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2/08/2014 09:00:25 50AB18 r sky_v14 [internal] forced to NDS2
2/08/2014 09:00:25 50AB18 r sky_v14 [internal] write to cardreader
2/08/2014 09:00:25 50AB18 D0 74 01 80 01
2/08/2014 09:00:25 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:25 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:26 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:26 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:26 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:27 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:27 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:27 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!
2/08/2014 09:00:27 50AB18 r sky_v14 [internal] failed to read 7401 cmd length (00 00)
2/08/2014 09:00:27 50AB18 r sky_v14 [internal] passed history check
2/08/2014 09:00:27 50AB18 r TA1 = 13
2/08/2014 09:00:27 50AB18 r FI = 01
2/08/2014 09:00:27 50AB18 r TA1 = 12
2/08/2014 09:00:27 50AB18 r FI = 01
2/08/2014 09:00:27 50AB18 r TA1 = 13
2/08/2014 09:00:27 50AB18 r FI = 01
2/08/2014 09:00:27 50AB18 r TA1 = 13
2/08/2014 09:00:27 50AB18 r FI = 01
2/08/2014 09:00:27 50AB18 r TA1 = 11
2/08/2014 09:00:27 50AB18 r FI = 01
2/08/2014 09:00:27 50AB18 r TA1 = 11
2/08/2014 09:00:27 50AB18 r FI = 01
2/08/2014 09:00:27 50AB18 r TA1 = 11
2/08/2014 09:00:27 50AB18 r FI = 01
2/08/2014 09:00:27 50AB18 r sky_v14 [internal] card system not supported
2/08/2014 09:00:27 50AB18 r sky_v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2/08/2014 09:00:27 50AB18 r sky_v14 [internal] card initializing error
2/08/2014 09:00:28 506028 c [DVBAPI] Demuxer #1 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 09:00:28 506028 c [DVBAPI] Demuxer #1 (re)starting decodingrequests on all 5 ecmpids!

Keine Ahnung was da schief läuft, und ich will nicht wissen wieviele Stunden ich die letzte Woche nach der Lösung des Problems gegoogelt habe - habe gestern auch extra nochmal das Image neu geflasht ...
 
Zuletzt bearbeitet von einem Moderator:
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

1. in der oscam.config fehlt emmlogdir =
du sollst NUR hinter dem gleich zeichen leer lassen,nciht den ganz Eintrag löschen

2. Passwort hiter dem = beim user auch raus

3. lass den mist mit blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-25 , allles blocken

4 . ist der Haken bei Autospeed drin im Reader drin ?

5. In was für einer Box oder Server steckt die karte eigentlich? steht hier glaube ich nirgends


Hier die komplette config für die v14 in einer Dreambox 800se
Nur noch per FTP auf die Box.Box komplett neu starten und karte reinmachen,oscam starten
emm werden in dem Ordner gespeichert,in dem die configs liegen​
Sicherheitshalber nach Neustart nochmal kontrollieren ob Autospedd an ist

Link ist nicht mehr aktiv.
 
Zuletzt bearbeitet:
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?


configs liegen im Ordner /var/keys, Ordnerberechtigung/Dateiattribute auf 755 gesetzt, Häkchen in "Reader general settings" bei Saveemm für unique und global vorhanden, emm.log wurde bisher keine geschrieben, S** hat wohl noch nichts geschickt, Online-Freischaltung funzt nicht mehr (gesperrt) und die Kundenberater blocken.

Anbei das oscam.log, ab letzten beiden Zeilen immer dieselbe 2 Zeile mi derselben Meldung (nicht reinkopiert), Eventuell interessant Zeile 54 "2/08/2014 11:49:32 5057E8 r sky_v14 [internal] card initializing error" aber wahrscheinlich deshalb, weil die emms ja geblockt sind - muss warten bis S** emms schickt, Box steht auf Sky Krimi. Kann daher keine emms über den Reader eintragen, habe nur welche aus der Zeit bevor die Karte dann nicht mehr ging, aber die ändern sich wahrscheinlich täglich. Habe das schon probiert unter zuhilfenahme der Sammelliste, aber hat nicht geholfen.
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Aug 2 11:49:13 2014
-------------------------------------------------------------------------------
2/08/2014 11:49:13 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9612 (sh4-streamboard-linux-gnu)
2/08/2014 11:49:13 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1711
2/08/2014 11:49:13 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2/08/2014 11:49:13 0 s signal handling initialized
2/08/2014 11:49:13 0 s monitor: initialized (fd=11, port=988)
2/08/2014 11:49:13 0 s sky_v14 [internal] creating thread for device /dev/sci0
2/08/2014 11:49:13 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2/08/2014 11:49:13 0 s waiting for local card init
2/08/2014 11:49:13 4FE318 r sky_v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2/08/2014 11:49:13 29800480 h webif: decompressed 145771 bytes back into 355444 bytes
2/08/2014 11:49:13 29800480 h HTTP Server running. ip=0.0.0.0 port=8888
2/08/2014 11:49:14 4FE318 r sky_v14 [internal] card detected
2/08/2014 11:49:16 4FE318 r sky_v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 11:49:16 4FE318 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2/08/2014 11:49:16 4FE318 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 11:49:16 4FE318 r sky_v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2/08/2014 11:49:17 4FE318 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 11:49:18 4FE318 r sky_v14 [internal] Card type: P1TV
2/08/2014 11:49:18 4FE318 r sky_v14 [internal] Rom version: 20AA
2/08/2014 11:49:18 4FE318 r sky_v14 [internal] Credit available on card: 0 euro
2/08/2014 11:49:18 4FE318 r sky_v14 [internal] Extended 4C detected
2/08/2014 11:49:18 4FE318 r sky_v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2/08/2014 11:49:18 4FE318 r sky_v14 [internal] found card system videoguard2
2/08/2014 11:49:18 4FE318 r sky_v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2/08/2014 11:49:18 4FE318 r sky_v14 [videoguard2] card detected
2/08/2014 11:49:18 4FE318 r sky_v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2/08/2014 11:49:19 0 s init for all local cards done
2/08/2014 11:49:19 0 s anti cascading disabled
2/08/2014 11:49:19 503AF0 c plain dvbapi-client granted (local, au=on (1 reader))
2/08/2014 11:49:19 503AF0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2/08/2014 11:49:19 4FE318 r sky_v14 [videoguard2] creating thread for device /dev/sci0
2/08/2014 11:49:19 5057E8 r sky_v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2/08/2014 11:49:20 5057E8 r sky_v14 [videoguard2] card detected
2/08/2014 11:49:20 5057E8 r sky_v14 [internal] Doing fast reset
2/08/2014 11:49:22 5057E8 r sky_v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 11:49:22 5057E8 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2/08/2014 11:49:22 5057E8 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 11:49:22 5057E8 r sky_v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2/08/2014 11:49:23 5057E8 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 11:49:26 5057E8 r sky_v14 [internal] card system not supported
2/08/2014 11:49:26 5057E8 r sky_v14 [internal] Normal mode failed, reverting to Deprecated Mode
2/08/2014 11:49:26 5057E8 r sky_v14 [internal] Doing fast reset
2/08/2014 11:49:28 5057E8 r sky_v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 11:49:28 5057E8 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2/08/2014 11:49:28 5057E8 r sky_v14 [internal] TEST tempo mhz check = 500 mhz
2/08/2014 11:49:28 5057E8 r sky_v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2/08/2014 11:49:29 5057E8 r sky_v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2/08/2014 11:49:32 5057E8 r sky_v14 [internal] card system not supported
2/08/2014 11:49:32 5057E8 r sky_v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2/08/2014 11:49:32 5057E8 r sky_v14 [internal] card initializing error
2/08/2014 11:49:39 503AF0 c [DVBAPI] Receiver sends PMT command 3 for channel 0017
2/08/2014 11:49:39 503AF0 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000 pmtpid 0061
2/08/2014 11:49:39 503AF0 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2/08/2014 11:49:39 503AF0 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2/08/2014 11:49:39 503AF0 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2/08/2014 11:49:39 503AF0 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2/08/2014 11:49:39 503AF0 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2/08/2014 11:49:39 503AF0 c Found 5 ECMpids and 3 STREAMpids in PMT
2/08/2014 11:49:39 503AF0 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000 pmtpid 0061
2/08/2014 11:49:39 503AF0 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
2/08/2014 11:49:39 503AF0 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2/08/2014 11:49:39 503AF0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

sorry,dann kann das doch auch nicht gehen,die config ist für eine Dreambux/Vu+ ,jetzt frag mich nicht welcher eintrag bei dir hinkommt boxtype = dreambox

hast nicht noch ne Dream/VU+ oder einen Server rumstehen?
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

der Pingulux kann mit
Code: 
boxtype = dreambox
laufen als auch ohne angabe sollte es auch gehen
Code: 
boxtype =

probier es mal mit deaktiviertem autospeed und mal ohne ins7e11 eintrag
oder auch mal mit den normalen mhz werten
Code: 
mhz = 357
autospeed = 0
cardmhz = 357
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

ja, war gerade eine rauchen und hab mir gerade dasselbe überlegt. Hohl mir jetzt mal die vu+ von meinem Vater und schließe die probehalber an und ändere die configs entsprechend - aber auch bei dem Pingulux sollte man unter boxtype =dreambox eintragen.
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

hast du mal die config die ich gemacht habe auf die box kopiert und neu gestartet?
 
AW: Schreiben Sky - muss ich den neuen (unerwünschten) Receiver annehmen?

DA hat sich unsere Antwort überschnitten
oscam.log
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Aug 2 12:39:49 2014
-------------------------------------------------------------------------------
2/08/2014 12:39:49 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9612 (sh4-streamboard-linux-gnu)
2/08/2014 12:39:49 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1166
2/08/2014 12:39:49 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2/08/2014 12:39:49 0 s signal handling initialized
2/08/2014 12:39:49 0 s monitor: initialized (fd=6, port=988)
2/08/2014 12:39:49 0 s sky_v14 [internal] creating thread for device /dev/sci0
2/08/2014 12:39:49 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2/08/2014 12:39:49 0 s waiting for local card init
2/08/2014 12:39:49 4FE318 r sky_v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2/08/2014 12:39:49 500010 h webif: decompressed 145771 bytes back into 355444 bytes
2/08/2014 12:39:49 500010 h HTTP Server running. ip=0.0.0.0 port=8888
2/08/2014 12:39:50 4FE318 r sky_v14 [internal] card detected
2/08/2014 12:39:52 4FE318 r sky_v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2/08/2014 12:39:52 4FE318 r sky_v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2/08/2014 12:39:52 4FE318 r sky_v14 [internal] Calculated work ETU is 18.60 us reader mhz = 500
2/08/2014 12:39:53 4FE318 r sky_v14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] Card type: P1TV
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] Rom version: 20AA
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] Credit available on card: 0 euro
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] Extended 4C detected
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] Region Code: 00BO0102
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] Pincode read: 6167
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] PCB settings: FF FF FF FF
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] ready for requests
2/08/2014 12:39:54 4FE318 r sky_v14 [internal] found card system videoguard2
2/08/2014 12:39:54 4FE318 r sky_v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2/08/2014 12:39:54 4FE318 r sky_v14 [videoguard2] card detected
2/08/2014 12:39:54 4FE318 r sky_v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2/08/2014 12:39:54 4FE318 r sky_v14 [videoguard2] tier: 0046, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 007b, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 007c, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 007d, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 0081, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 0082, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 0087, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 0088, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 008e, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 008f, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 00f3, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 00fa, expiry date: 19/11/2014-00:00:00
2/08/2014 12:39:55 4FE318 r sky_v14 [videoguard2] tier: 00ff, expiry date: 19/11/2014-00:00:00
2/08/2014 12:40:00 0 s init for all local cards done
2/08/2014 12:40:00 0 s anti cascading disabled
2/08/2014 12:40:00 506C38 c plain dvbapi-client granted (local, au=on (1 reader))
2/08/2014 12:40:00 506C38 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

  • Gesperrt
  • Artikel Artikel
Sky Deutschland Sky sichert Plattform vor Piraterie
16 17 18
Antworten
263
Aufrufe
201K
josef.13
T
Sky Q-Upgrade mit vorhandener V14 ?
2
Antworten
16
Aufrufe
5K
Taucheranzug
T
H
Sky gekündigt - keinerlei Kontakt bzgl neuem Angebot
Antworten
11
Aufrufe
2K
Alfredo01
A
C
Neue V14 mit Dreambox, Sky+ Receiver oderSky CI+ Modul ?
Antworten
8
Aufrufe
1K
filius00
  • Gesperrt
  • Angepinnt
  • Artikel Artikel
FAQ - Rund um SKY V13/V14 Pairing
Antworten
0
Aufrufe
255K
bombadil
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…