S02, OSCAM 9963, OpenATV 4.2, OS1+

[ultima]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

Ich meine gelesen zu haben, das man für die S02 Karte das Openatv 4.1 nutzen soll und nicht 4.2 da das wohl für V13/V14 blocken und Fastmode optimiert ist.

 

[0101TM0101]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

sorry, was meinst du mit autospeed?

Spoiler

[reader]
label = SkyGermany
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
autospeed = 0
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

 

[4gx35]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

dann solltest du besser mal alle einträge per oscam webif machen,
dort unter readers bearbeiten findest du es weiter unten bei den mhz einträgen sofort, wird dort auch erklärt
setzt mhz autom. cardmhz 2700 sind ja auch nicht wirklich 27mhz
gilt für dreamboxen und viele andere mips boxen wie vu

 

[0101TM0101]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

dann solltest du besser mal alle einträge per oscam webif machen,
dort unter readers bearbeiten findest du es weiter unten bei den mhz einträgen sofort, wird dort auch erklärt
setzt mhz autom. cardmhz 2700 sind ja auch nicht wirklich 27mhz

alles klar .. nach den änderungen habe ich folgenden log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 8 17:51:47 2015
-------------------------------------------------------------------------------
2015/01/08 17:51:47 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9963 (mipsel-unknown-linux-gnu-libusb)
2015/01/08 17:51:47 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 569
2015/01/08 17:51:47 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/01/08 17:51:47 0 s [Emu] OSEmu (built-in) version 706
2015/01/08 17:51:47 0 s userdb reloaded: xxx accounts loaded, 0 expired, 0 disabled
2015/01/08 17:51:47 0 s signal handling initialized
2015/01/08 17:51:47 0 s 136 service-id's loaded in 1 ms
2015/01/08 17:51:47 0 s 3 entries read from oscam.whitelist
2015/01/08 17:51:47 0 s cccam: initialized (fd=6, port=xxxxxxx, prio=1)
2015/01/08 17:51:47 0 s SkyGermany [internal] creating thread for device /dev/sci0
2015/01/08 17:51:47 0 s emulator [emu] creating thread for device emulator
2015/01/08 17:51:47 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/08 17:51:47 0 s waiting for local card init
2015/01/08 17:51:47 550418 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/01/08 17:51:47 54E738 r SkyGermany [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2015/01/08 17:51:47 77400468 h webif: decompressed 94244 bytes back into 248472 bytes
2015/01/08 17:51:47 77400468 h HTTP Server running. ip=0.0.0.0 port=83
2015/01/08 17:51:48 54E738 r SkyGermany [internal] card detected
2015/01/08 17:51:48 550418 r emulator [emu] card detected
2015/01/08 17:51:49 550418 r emulator [emu] found card system emu
2015/01/08 17:51:49 550418 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/08 17:51:57 54E738 r SkyGermany [internal] Error activating card.
2015/01/08 17:52:15 0 --- Skipped 2 duplicated log lines ---
2015/01/08 17:52:15 54E738 r SkyGermany [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/08 17:52:15 54E738 r SkyGermany [internal] card initializing error
2015/01/08 17:52:16 0 s init for all local cards done
2015/01/08 17:52:16 570FA8 c plain dvbapi-client granted (local, au=auto (3 reader))
2015/01/08 17:52:16 570FA8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/01/08 17:52:18 570FA8 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/01/08 17:52:18 570FA8 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/01/08 17:52:18 570FA8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/01/08 17:52:18 570FA8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/01/08 17:52:18 570FA8 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/01/08 17:52:18 570FA8 c Found 5 ECMpids and 2 STREAMpids in PMT
2015/01/08 17:52:18 570FA8 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000 pmtpid 0061
2015/01/08 17:52:18 570FA8 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
2015/01/08 17:52:18 570FA8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/01/08 17:52:18 570FA8 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09C4 PROVID 000000 ECMPID 1B40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 17:52:18 570FA8 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 09AF PROVID 000000 ECMPID 1F40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 17:52:18 570FA8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 17:52:18 570FA8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/08 17:52:19 570FA8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

 

[4gx35]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

geht eher mit autospeed, ohne autospeed funktioniert es in der dream auch nicht mehr,

einzige alternative für s02 karte: autospeed deaktiv, mhz 700, cardmhz 2100 noch testen

 

[0101TM0101]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

jetzt habe ich irgendwie den überblick verloren:
oscam.server:

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9963
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = SkyGermany
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

[reader]
label = keyserver
enable = 0
protocol = cs357x
device = 127.0.0.1,44444
user = server
password = server
caid = 0D05
group = 2

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00&0F00,090F,0500,1801,0604,2600,FFFF
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00

 

[4gx35]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

post #15 mit autospeed aktiv unbedingt per oscam webif eintragen

 

[0101TM0101]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

post #15 mit autospeed aktiv unbedingt per oscam webif eintragen

Meinst du das so:
Sets mhz according to atr for smargo readers and dreambox internal readers. Default is checked .... ist angehakt!

Mhz: 600
Card Mhz: 600

 

[4gx35]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

falls angehakt (auto aktiv) soll man doch cardmhz 2700 setzen und mhz leer !!!

 

[0101TM0101]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

server sieht jetzt so aus:

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9963
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = SkyGermany
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
cardmhz = 2700
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

[reader]
label = keyserver
enable = 0
protocol = cs357x
device = 127.0.0.1,44444
user = server
password = server
caid = 0D05
group = 2

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00&0F00,090F,0500,1801,0604,2600,FFFF
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00

log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 8 18:19:29 2015
-------------------------------------------------------------------------------
2015/01/08 18:19:29 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9963 (mipsel-unknown-linux-gnu-libusb)
2015/01/08 18:19:29 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3927
2015/01/08 18:19:29 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/01/08 18:19:29 0 s [Emu] OSEmu (built-in) version 706
2015/01/08 18:19:29 0 s userdb reloaded: xx accounts loaded, 0 expired, 0 disabled
2015/01/08 18:19:29 0 s signal handling initialized
2015/01/08 18:19:29 0 s 136 service-id's loaded in 1 ms
2015/01/08 18:19:29 0 s 3 entries read from oscam.whitelist
2015/01/08 18:19:29 0 s cccam: initialized (fd=6, port=12000, prio=1)
2015/01/08 18:19:29 0 s SkyGermany [internal] creating thread for device /dev/sci0
2015/01/08 18:19:29 0 s emulator [emu] creating thread for device emulator
2015/01/08 18:19:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/08 18:19:29 0 s waiting for local card init
2015/01/08 18:19:29 568E48 r SkyGermany [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2015/01/08 18:19:29 56AB28 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/01/08 18:19:29 77400468 h webif: decompressed 94244 bytes back into 248472 bytes
2015/01/08 18:19:29 77400468 h HTTP Server running. ip=0.0.0.0 port=83
2015/01/08 18:19:30 568E48 r SkyGermany [internal] card detected
2015/01/08 18:19:30 56AB28 r emulator [emu] card detected
2015/01/08 18:19:31 56AB28 r emulator [emu] found card system emu
2015/01/08 18:19:31 56AB28 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/08 18:19:38 568E48 r SkyGermany [internal] Error activating card.
2015/01/08 18:19:57 0 --- Skipped 2 duplicated log lines ---
2015/01/08 18:19:57 568E48 r SkyGermany [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/08 18:19:57 568E48 r SkyGermany [internal] card initializing error
2015/01/08 18:19:57 0 s init for all local cards done
2015/01/08 18:19:57 570808 c plain dvbapi-client granted (local, au=auto (3 reader))
2015/01/08 18:19:57 570808 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/01/08 18:20:00 570808 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/01/08 18:20:00 570808 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/01/08 18:20:00 570808 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/01/08 18:20:00 570808 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/01/08 18:20:00 570808 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/01/08 18:20:00 570808 c Found 5 ECMpids and 2 STREAMpids in PMT
2015/01/08 18:20:00 570808 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000 pmtpid 0061
2015/01/08 18:20:00 570808 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
2015/01/08 18:20:00 570808 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/01/08 18:20:00 570808 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09C4 PROVID 000000 ECMPID 1B40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 18:20:00 570808 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 09AF PROVID 000000 ECMPID 1F40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 18:20:00 570808 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 18:20:00 570808 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

ergebnis nach wie vor SCHWARZ

 

[4gx35]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

dann funktioniert wohl autospeed nicht bei dir, kontrolliere mal per webif, ob jetzt bei mhz etwas steht,
sollte evtl. 450 oder 540 sein, sonst oscam neu starten, falls du es vorher nicht gemacht hast und nochmals nachsehen,

falls kein erfolg, jetzt beide mhz 600 aber autospeed kein haken. oscam neu starten per webif und log posten

 

[ultima]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

Beitrag#16 von mir mal gelesen? Vielleicht liegt es ja einfach daran.

 

[0101TM0101]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

dann funktioniert wohl autospeed nicht bei dir, kontrolliere mal per webif, ob jetzt bei mhz etwas steht,
sollte evtl. 450 oder 540 sein, sonst oscam neu starten, falls du es vorher nicht gemacht hast und nochmals nachsehen,

falls kein erfolg, jetzt beide mhz 600 aber autospeed kein haken. oscam neu starten per webif und log posten

da steht jetzt MHz 357 ... ist das ein Problem?

 

[4gx35]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

dann scheint auto nicht zu funktionieren, mach es mal mit 600 ohne auto

kann es sein, dass die karte falsch herum im reader steckt also chip nach oben oder unten ?

 

[0101TM0101]

AW: S02, OSCAM 9963, OpenATV 4.2, OS1+

dann scheint auto nicht zu funktionieren, mach es mal mit 600 ohne auto

du meinst also cardmhz und mhz auf 600 und autospeed nicht markieren, richtig?

server also so:

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9963
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = SkyGermany
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1

[reader]
label = keyserver
enable = 0
protocol = cs357x
device = 127.0.0.1,44444
user = server
password = server
caid = 0D05
group = 2

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00&0F00,090F,0500,1801,0604,2600,FFFF
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
emmcache = 1,1,2
auprovid = 030B00

was hat der zweite und dritter reader zu sagen?

wenn keiner mehr eine Lösung hat, dann eventuell doch mal das 4.1 flashen? möchte ich ja nur ungern machen.


log ist jetzt dieser:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 8 18:48:30 2015
-------------------------------------------------------------------------------
2015/01/08 18:48:30 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9963 (mipsel-unknown-linux-gnu-libusb)
2015/01/08 18:48:30 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 7452
2015/01/08 18:48:30 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/01/08 18:48:30 0 s [Emu] OSEmu (built-in) version 706
2015/01/08 18:48:30 0 s userdb reloaded: xx accounts loaded, 0 expired, 0 disabled
2015/01/08 18:48:30 0 s signal handling initialized
2015/01/08 18:48:30 0 s 136 service-id's loaded in 1 ms
2015/01/08 18:48:30 0 s 3 entries read from oscam.whitelist
2015/01/08 18:48:30 0 s cccam: initialized (fd=6, port=12000, prio=1)
2015/01/08 18:48:30 0 s SkyGermany [internal] creating thread for device /dev/sci0
2015/01/08 18:48:30 0 s emulator [emu] creating thread for device emulator
2015/01/08 18:48:30 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/01/08 18:48:30 0 s waiting for local card init
2015/01/08 18:48:30 56AB28 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/01/08 18:48:30 568E48 r SkyGermany [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2015/01/08 18:48:30 77400468 h webif: decompressed 94244 bytes back into 248472 bytes
2015/01/08 18:48:30 77400468 h HTTP Server running. ip=0.0.0.0 port=83
2015/01/08 18:48:31 56AB28 r emulator [emu] card detected
2015/01/08 18:48:31 568E48 r SkyGermany [internal] card detected
2015/01/08 18:48:32 56AB28 r emulator [emu] found card system emu
2015/01/08 18:48:32 56AB28 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/01/08 18:48:39 568E48 r SkyGermany [internal] Error activating card.
2015/01/08 18:48:58 0 --- Skipped 2 duplicated log lines ---
2015/01/08 18:48:58 568E48 r SkyGermany [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/01/08 18:48:58 568E48 r SkyGermany [internal] card initializing error
2015/01/08 18:48:58 0 s init for all local cards done
2015/01/08 18:48:58 56EBB8 c plain dvbapi-client granted (local, au=auto (3 reader))
2015/01/08 18:48:58 56EBB8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/01/08 18:49:01 56EBB8 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/01/08 18:49:01 56EBB8 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/01/08 18:49:01 56EBB8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/01/08 18:49:01 56EBB8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/01/08 18:49:01 56EBB8 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/01/08 18:49:01 56EBB8 c Found 5 ECMpids and 2 STREAMpids in PMT
2015/01/08 18:49:01 56EBB8 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000 pmtpid 0061
2015/01/08 18:49:01 56EBB8 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
2015/01/08 18:49:01 56EBB8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/01/08 18:49:01 56EBB8 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09C4 PROVID 000000 ECMPID 1B40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 18:49:01 56EBB8 c [DVBAPI] Demuxer #0 impossible to descramble PID #3 CAID 09AF PROVID 000000 ECMPID 1F40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 18:49:01 56EBB8 c [DVBAPI] Demuxer #0 impossible to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 PMTPID 0061 (NO MATCHING READER)
2015/01/08 18:49:01 56EBB8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/01/08 18:49:01 56EBB8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

also das steht wirklich so im log: 2015/01/08 18:48:30 77400468 h HTTP Server running. ip=0.0.0.0 port=83