S02 HD01 u. V14

[dummernutzer2]

Hallo,

hatte oscam zuerst ohne die S02 (ja ich weiß früher oder später geht sie aus, aber läuft noch bis 20.07.) und nur 2 Readern laufen, als jetzt die S02 dran gehangen habe bekomme ich folgendes im Log

Spoiler

• 2015/05/28 13:40:58 3E1880 h (reader) V14 [mouse] Restarting reader
• 2015/05/28 13:40:58 3E1880 h (reader) V14 [mouse] creating thread for device /dev/SkyDE
• 2015/05/28 13:40:58 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75246
• 2015/05/28 13:40:58 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75310
• 2015/05/28 13:40:58 402FE8 r (reader) V14 [mouse] Reader initialized (device=/dev/SkyDE, detect=cd, mhz=600, cardmhz=357)
• 2015/05/28 13:40:59 402FE8 r (reader) V14 [mouse] card detected
• 2015/05/28 13:40:59 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75276
• 2015/05/28 13:41:00 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75295
• 2015/05/28 13:41:01 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75321
• 2015/05/28 13:41:02 402FE8 r (reader) V14 [mouse] Error activating card.
• 2015/05/28 13:41:03 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75399
• 2015/05/28 13:41:04 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75229
• 2015/05/28 13:41:05 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75293
• 2015/05/28 13:41:06 402FE8 r (reader) V14 [mouse] Error activating card.
• 2015/05/28 13:41:07 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75256
• 2015/05/28 13:41:08 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75305
• 2015/05/28 13:41:09 402FE8 r (reader) V14 [mouse] Buffers readed 0 bytes total time_us 75270
• 2015/05/28 13:41:10 402FE8 r (reader) V14 [mouse] Error activating card.
• 2015/05/28 13:41:11 402FE8 r (reader) V14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/05/28 13:41:11 402FE8 r (reader) V14 [mouse] card initializing error

oscam.config

Spoiler

[global]
logfile = /usr/local/etc/oscam.log
clientmaxidle = 160
nice = -1
maxlogsize = 4000

[cache]

[cs357x]
port = 12345

[cccam]
port = 3...1
nodeid = B4F30CDA102B14FC
version = 2.3.0
reshare = 0
reshare_mode = 0

[webif]
httpport = 1234
httpuser = admin
httppwd = oscam
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

oscam.server

Spoiler

[reader]
label = HDPLUS_DE_HD01
description = HD01
protocol = mouse
device = /dev/HD01
caid = 1830
boxkey = A...C
rsakey = B..5
detect = cd
group = 1
emmcache = 1,2,2,0

[reader]
label = V14
description = SkyDE
protocol = mouse
device = /dev/SkyDE
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,3,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = S02
description = S02
protocol = mouse
device = /dev/S02
caid = 1702
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1

Einstellung der easymouse für die V14
oben, unten, oben, oben

 

[dodo83]

AW: S02 HD01 u. V14

Hardware?
Hub dazwischen?
und wenn du die S02 wieder abziehst?

 

[dummernutzer2]

AW: S02 HD01 u. V14

alles easymouse2
hardware ist ein Raspberry B+ mit 4 USB-Ports, alle Mäuse hängen direkt am PI

- - - - - - - - - -

Problem scheint gelöst, hab die Karte nochmal rein und raus
und jetzt wird sie erkannt

 

[dodo83]

AW: S02 HD01 u. V14

und wenn du die S02 wieder abziehst?

teste mal mit einem Aktivem Hub