Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Support RNS 310 Firmware

gibt keine Möglichkeit, die TMS Meldung muss vom Sender entfernt werden.

Gruß
Frabusoft
 
Hallo.
Hat jemand andere Version von
diese version lässt nicht bei mir Instal. Kommt immer ein Fehlmeldung .Und zwar auf 2 Notebook. Alle beiden Win 7. Oder andere Soft .Da mit ich Firmware CD brennen kann.
Danke Voraus
 
Zuletzt bearbeitet:
Win7 32 oder 64 bit ? Welche Fehlermeldung kommt denn ?

Beiliegende TXT Datei beachtet ?
Gruß
Frabusoft
 
Zuletzt bearbeitet:
Warum brauchst du CDRWin? CD mit Firmware werden mit ImgBurn bei minimaler Geschwindigkeit aufgezeichnet.
Hier ist die Anweisung:
This torrent cotains 3 iso files that you can use to update your RNS-310 unit

According to volkswagen this should not be possible, but it is!
This new firmware activates the ability to control your bluetooth phone if you have a bluetooth interface,and it also adds bug fixes and navigation improvements
----------
Read this carefully before you continue!
The update process takes about 60 minutes, so make sure that you have a healthy battery and turn all lights,ac etc off before you start
Its ok to use a CD-RW, but make sure you burn the image in imgburn at the slowest possible speed supported by your record device.
Different files should be used depending on what firmware you have in your unit!
To se your current version, press and hold "SETUP" and then click version

Different versions:
----------
02xx
----------
If you are on any 02xx firmware but NOT on 0235 (like 0212, 0227 etc) you should use this disc:
"RNS310-02xx to 0351.img"

Burn the disc, put it in to the drive and follow the instructions on screen, the update will take about 30-60 minutes depending on your current version
The device will reboot several times during the process.

When the update is done, press SETUP again to make sure that you are on 0351.

(Optional) If you want to update to from 0351 0357 you can use this disc:
"Official Volkswagen 0335 or 0235.iso"

IMPORTANT! Only update to 0357 if you where on 02xx when you started this process, but NOT on 0235

!WARNING! , if you have updated from 0235 to 0351 using "RNS310 - 0235 to 0351.iso", do _NOT_ update to 0357 afterwards!, you may end up with a bricked device !WARNING!

The above warning is unconfirmed, so if you want to risk your device go head, but dont blaim me It MIGHT work but since the "RNS310 - 0235 to 0351.iso" is custom made, dont risk it. 0351 and 0357 is to my eyes identical in functionality

----------
0235
----------

If you are on 0235, please use this iso to update to 0351:
RNS310 - 0235 to 0351.iso

!WARNING! , if you have updated from 0235 to 0351 using "RNS310 - 0235 to 0351.iso", do _NOT_ update to 0357 afterwards!, you may end up with a bricked device !WARNING!

----------
03xx
----------
If you already are on a 03xx firmware when you start, use the "Official Volkswagen 0335 or 0235.iso" to update to 0357

----------
Regards,
// A fellow car entusiast
 
Zuletzt bearbeitet:
Ich habe schon Mal versucht mit ImgBurn zu brennen. Aber der Navi hat die CD nichts gelesen. Aber das war ein Portable Version. Vielleicht des wegen. Aber bis jetzt ich war mit Portable Version immer erfolgreich. Jetzt zu CDRWin. Der Win 7 64bit. Inst Anleitung habe ich gelesen. Exe als Administrator ausgeführt . Benutzerdefinierte Inst. Danach versucht zu installieren aber danach kommt Fehler 25001. Bitte den Computer neu starten und die Installation nochmal ausführen. Dies wird benötigt um die Treiber fehlerfrei anzurichten.
 
Auch umgestellt auf Ausführen im XP Modus ?
Steht in der Anleitung !

Gruß
Frabusoft
 
x-m@x Versuchen Sie, eine andere Version von ImgBurn herunterzuladen. Verwenden Sie die CD-RW mit einer Mindestgeschwindigkeit von 1x.
Bei mir hat alles vom ersten Mal gearbeitet.
 
Bitte keine CD-RW verwenden. Das LW im RNS ist da extrem empfindlich.
ein "mittendrin" abgebrochenes Firmware - Update will niemand.

Gruß
Frabusoft
 
Kann man vor beginn des Updates auf 351 den Motor starten und während des updates laufen lassen? Habe die Sorge das meine Batterie während des updates komplett entlädt.
Muss zwingend einen Medium mit Kartenmaterial am Ende des 357 Update vorhanden sein?
Gruß
 
Ja nur nicht spielen. An Aus.
Karten müssen nicht vorhanden sein.
Gruß
frabusoft
 
Hallo zusammen....wer kann mir bitte eine Update CD zukommen lassen da ich keine Möglichkeit habe selber zu brennen mit niedriger Geschwindigkeit.
Bin auf 235. Wäre nett wenn sich jemand findet.
 
Hi, hab ne Frage und hoffe mir kann hier jemand helfen.

Hab ein Seat Media System mit SW 0227
Passen da auch die Firmware Update CDs wie beim VW, Skoda....
Seat konnte ich nirgends erlesen.

Danke
LG Tintifaxi
 
Wen es ein baugleiches 310 ist, dann ja. Aber es könnte passieren das hinter her ein VW Logo beim Start erscheint.
Gruß Frabusoft
 
enau das befürchte ich nämlich auch!
 
Zuletzt bearbeitet von einem Moderator:
Dann fahr zum Freudlichen und frag mal nach einem Update. Kann sein das er sowas nicht kennt, auf jeden Fall wird es teurer.
Gruß
Frabusoft
 
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…