Hallo zusammen, hier in der ReelBox Abteilung.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com ffice ffice" /><o ></o >
<o ></o >
Habe in den letzten Tagen zum Testen C: Line erhalten.<o ></o >
Da diese immer nur einen Tag gültig gewesen sind (war ja auch nur zum Test) und ich irgendwo einen Fehler (so meine ich) habe wurde leider gar nichts Hell.<o ></o >
<o ></o >
Inzwischen sind es nun 4 C: Lines gewesen, alle mit demselben Misserfolg, alles Dunkel.
4 Tage umsonst, habe aber immerhin begriffen das es diese Ordner .cfg gibt, und abänderung eingetragen werden müssen.
<o ></o >
Bitte hier mal einen Einblick
<o ></o >
CCuser.cfg
hier trage ich Abänderungen ein, nach einem Neustart stehen diese dann in der CCcam.conf
C: ******* ***** 12000 ***** *****<o ></o >
<o ></o >
ALLOW WEBINFO: yes<o ></o >
<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com ffice:smarttags" /><st1 lace w:st="on"><st1 laceName w:st="on">WEBINFO</st1 laceName> <st1 laceName w:st="on">LISTEN</st1 laceName> <st1 laceType w:st="on">PORT</st1 laceType></st1 lace> : 16001<o ></o >
SOFTKEY FILE : /etc/vdr/plugins/cccam/keys/SoftCam.Key<o ></o >
AUTOROLL FILE : /etc/vdr/plugins/cccam/keys/AutoRoll.Key<o ></o >
STATIC CW FILE : /etc/vdr/plugins/cccam/keys/constant.cw<o ></o >
CAID PRIO FILE : /etc/vdr/plugins/cccam/etc/CCcam.prio<o ></o >
PROVIDERINFO FILE : /etc/vdr/plugins/cccam/etc/CCcam.providers<o ></o >
CHANNELINFO FILE : /etc/vdr/plugins/cccam/etc/C<o ></o >
<o ></o >
CCcam.conf<o ></o >
<o ></o >
C: ******* ***** 12000 ***** *****<o ></o >
<o ></o >
ALLOW WEBINFO: yes<o ></o >
<st1 lace w:st="on"><st1 laceName w:st="on">WEBINFO</st1 laceName> <st1 laceName w:st="on">LISTEN</st1 laceName> <st1 laceType w:st="on">PORT</st1 laceType></st1 lace> : 16001<o ></o >
SOFTKEY FILE : /etc/vdr/plugins/cccam/keys/SoftCam.Key<o ></o >
AUTOROLL FILE : /etc/vdr/plugins/cccam/keys/AutoRoll.Key<o ></o >
STATIC CW FILE : /etc/vdr/plugins/cccam/keys/constant.cw<o ></o >
CAID PRIO FILE : /etc/vdr/plugins/cccam/etc/CCcam.prio<o ></o >
PROVIDERINFO FILE : /etc/vdr/plugins/cccam/etc/CCcam.providers<o ></o >
CHANNELINFO FILE : /etc/vdr/plugins/cccam/etc/CCcam.channelinfo<o ></o >
<o ></o >
<o ></o >
SERIAL READER : /dev/ttyUSB0 smartreader+<o ></o >
SERIAL READER : /dev/ttyUSB1 smartreader+<o ></o >
SERIAL READER : /dev/ttyUSB2 smartreader+<o ></o >
SERIAL READER : /dev/ttyUSB3 smartreader+<o ></o >
SERIAL READER : /dev/ttyUSB4 smartreader+<o ></o >
SERIAL READER : /dev/ttyUSB5 smartreader+<o ></o >
SERIAL READER : /dev/ttyUSB6 smartreader+<o ></o >
SERIAL READER : /dev/ttyUSB7 smartreader+<o ></o >
SERIAL READER : /dev/ttyS1<o ></o >
<o ></o >
Cardcliend.conf<o ></o >
#<o ></o >
# Comment lines can start with # or ;<o ></o >
#<o ></o >
# every client line starts with the client name, followed by some arguments:<o ></o >
# 'hostname' is the name of the server<o ></o >
# 'port' is the port on the server<o ></o >
# 'emm' is a flag to allow EMM transfers to the server<o ></o >
# (0=disabled 1=enabled)<o ></o >
# 'caid' (optional) caid on which this client should work<o ></o >
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow<o ></o >
# anything between 1700 & 17FF.<o ></o >
# Default is 1700 & FF00. If only caid is given mask is FFFF.<o ></o >
# You may give multiple caid/mask values comma separated<o ></o >
# (e.g. 1702,1722,0d0c/ff00).<o ></o >
# 'username' is the login username<o ></o >
# 'password' is the login password<o ></o >
#<o ></o >
# radegast client<o ></o >
#radegast:hostname ort:emm/caid/mask<o ></o >
#<o ></o >
# aroureos client<o ></o >
# 'hexbase'<o ></o >
# 'hexserial' card data for which EMM updates should be send<o ></o >
#aroureos:hostname ort:emm/caid/mask:hexbase:hexserial<o ></o >
#<o ></o >
# camd33 client (tcp protocol)<o ></o >
# 'aeskey' is the AES key (32bytes), disable encryption if missing<o ></o >
#camd33:hostname ort:emm/caid/mask:username assword:aeskey<o ></o >
#<o ></o >
# camd35 client (udp protocol)<o ></o >
#camd35:hostname ort:emm/caid/mask:username assword<o ></o >
#<o ></o >
# cardd client<o ></o >
#cardd:hostname ort:emm/caid/mask:username assword<o ></o >
#<o ></o >
# buffy client<o ></o >
# 'aeskey' is the AES key (32bytes), disable encryption if missing<o ></o >
#buffy:hostname ort:emm:username assword:aeskey<o ></o >
#<o ></o >
# newcamd client<o ></o >
# 'cfgkey' is the config key (28bytes)<o ></o >
#newcamd:hostname ort:emm/caid/mask:username assword:cfgKey<o ></o >
#<o ></o >
# gbox client<o ></o >
#<o ></o >
# NOTE: hostname & port will be ignore. GBOX must be runnning on the local<o ></o >
# machine. For convinience you should choose localhost:8004<o ></o >
#gbox:localhost:8004:0/0000/0000<o ></o >
#<o ></o >
#<o ></o >
# cccam local client<o ></o >
<o ></o >
cccam2: ******* ***** ort:12000/1702/1722: *****:*****<o ></o >
<o ></o >
Weiß nicht wo der Fehler liegt, bitte um Help.
Meine ReelBox Avantgarde ist eine Sat Box, mit 2 DVB-s2 Tunern,
empfange über Astra 19
Router: Port 12000 offen
192.168.0.254 ist die ReelBox
IMG Removed
Weiteres habe ich in den einstellungen noch nicht bearbeitet.
Kann eigendlich auch ohne eine C: Line getestet werden ob alles stimmt?
Koro
<o
Habe in den letzten Tagen zum Testen C: Line erhalten.<o
Da diese immer nur einen Tag gültig gewesen sind (war ja auch nur zum Test) und ich irgendwo einen Fehler (so meine ich) habe wurde leider gar nichts Hell.<o
<o
Inzwischen sind es nun 4 C: Lines gewesen, alle mit demselben Misserfolg, alles Dunkel.
4 Tage umsonst, habe aber immerhin begriffen das es diese Ordner .cfg gibt, und abänderung eingetragen werden müssen.
<o
Bitte hier mal einen Einblick
<o
CCuser.cfg
hier trage ich Abänderungen ein, nach einem Neustart stehen diese dann in der CCcam.conf
C: ******* ***** 12000 ***** *****<o
<o
ALLOW WEBINFO: yes<o
<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com
SOFTKEY FILE : /etc/vdr/plugins/cccam/keys/SoftCam.Key<o
AUTOROLL FILE : /etc/vdr/plugins/cccam/keys/AutoRoll.Key<o
STATIC CW FILE : /etc/vdr/plugins/cccam/keys/constant.cw<o
CAID PRIO FILE : /etc/vdr/plugins/cccam/etc/CCcam.prio<o
PROVIDERINFO FILE : /etc/vdr/plugins/cccam/etc/CCcam.providers<o
CHANNELINFO FILE : /etc/vdr/plugins/cccam/etc/C<o
<o
CCcam.conf<o
<o
C: ******* ***** 12000 ***** *****<o
<o
ALLOW WEBINFO: yes<o
<st1
SOFTKEY FILE : /etc/vdr/plugins/cccam/keys/SoftCam.Key<o
AUTOROLL FILE : /etc/vdr/plugins/cccam/keys/AutoRoll.Key<o
STATIC CW FILE : /etc/vdr/plugins/cccam/keys/constant.cw<o
CAID PRIO FILE : /etc/vdr/plugins/cccam/etc/CCcam.prio<o
PROVIDERINFO FILE : /etc/vdr/plugins/cccam/etc/CCcam.providers<o
CHANNELINFO FILE : /etc/vdr/plugins/cccam/etc/CCcam.channelinfo<o
<o
<o
SERIAL READER : /dev/ttyUSB0 smartreader+<o
SERIAL READER : /dev/ttyUSB1 smartreader+<o
SERIAL READER : /dev/ttyUSB2 smartreader+<o
SERIAL READER : /dev/ttyUSB3 smartreader+<o
SERIAL READER : /dev/ttyUSB4 smartreader+<o
SERIAL READER : /dev/ttyUSB5 smartreader+<o
SERIAL READER : /dev/ttyUSB6 smartreader+<o
SERIAL READER : /dev/ttyUSB7 smartreader+<o
SERIAL READER : /dev/ttyS1<o
<o
Cardcliend.conf<o
#<o
# Comment lines can start with # or ;<o
#<o
# every client line starts with the client name, followed by some arguments:<o
# 'hostname' is the name of the server<o
# 'port' is the port on the server<o
# 'emm' is a flag to allow EMM transfers to the server<o
# (0=disabled 1=enabled)<o
# 'caid' (optional) caid on which this client should work<o
# 'mask' (optional) mask for caid e.g. caid=1700 mask=FF00 would allow<o
# anything between 1700 & 17FF.<o
# Default is 1700 & FF00. If only caid is given mask is FFFF.<o
# You may give multiple caid/mask values comma separated<o
# (e.g. 1702,1722,0d0c/ff00).<o
# 'username' is the login username<o
# 'password' is the login password<o
#<o
# radegast client<o
#radegast:hostname
#<o
# aroureos client<o
# 'hexbase'<o
# 'hexserial' card data for which EMM updates should be send<o
#aroureos:hostname
#<o
# camd33 client (tcp protocol)<o
# 'aeskey' is the AES key (32bytes), disable encryption if missing<o
#camd33:hostname
#<o
# camd35 client (udp protocol)<o
#camd35:hostname
#<o
# cardd client<o
#cardd:hostname
#<o
# buffy client<o
# 'aeskey' is the AES key (32bytes), disable encryption if missing<o
#buffy:hostname
#<o
# newcamd client<o
# 'cfgkey' is the config key (28bytes)<o
#newcamd:hostname
#<o
# gbox client<o
#<o
# NOTE: hostname & port will be ignore. GBOX must be runnning on the local<o
# machine. For convinience you should choose localhost:8004<o
#gbox:localhost:8004:0/0000/0000<o
#<o
#<o
# cccam local client<o
<o
cccam2: ******* *****
<o
Weiß nicht wo der Fehler liegt, bitte um Help.
Meine ReelBox Avantgarde ist eine Sat Box, mit 2 DVB-s2 Tunern,
empfange über Astra 19
Router: Port 12000 offen
192.168.0.254 ist die ReelBox
IMG Removed
Weiteres habe ich in den einstellungen noch nicht bearbeitet.
Kann eigendlich auch ohne eine C: Line getestet werden ob alles stimmt?
Koro