Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Probleme bei Debian Installation auf Igel 564

    Nobody is reading this thread right now.
AW: Probleme bei Debian Installation auf Igel 564

So, alles fertig ;-)
Hat funktioniert!
Jetzt noch die Konfiguration...
da kann ich doch eigentlich die ganzen Sachen aus meiner Freetz Kiste übernehmen, oder?
 
AW: Probleme bei Debian Installation auf Igel 564

Ja sollte funktionieren!
 
AW: Probleme bei Debian Installation auf Igel 564

So, habe alles konfiguriert, aber irgendwie klappt das alles nicht und ich habe mich verzettelt.
Hänge einfach mal meine Config an, vielleicht findet sich ja der Fehler...
Hab wie gesagt jetzt nen Igel 564 mit Debian und IPC drauf.
Nutzen möchte ich wie bei meiner Freetz OScam und Cccam.
Kartenleser habe ich zwei Smargoreader+, die über einen USB-Hub (King) angeschlossen wurden.
Slot1 = HD+ (weisse Karte), Slot2 = S02

cccam cfg

N: 127.0.0.1 34000 userhd pass1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 # Oscam Verbindung

#C: 192.168.0.20 12000 username password no { 0:0:2 } # Forum / Username

F: user01 1234 0 0 0 { 0:0:1 }
F: user02 1234 1 0 0 { 0:0:2 }
F: user03 1234 2 0 0 { 0:0:3 }
F: user04 1234 3 0 0 { 0:0:4 }
F: user05 1234 4 0 0 { 0:0:5 }
F: user06 1234 5 0 0 { 0:0:6 }
F: user07 1234 6 0 0 { 0:0:7 }
F: user08 1234 7 0 0 { 0:0:8 }
F: user09 1234 8 0 0 { 0:0:9 }
F: user10 1234 9 0 0 { 0:0:10 }
F: user11 1234 10 0 0 { 0:0:11 }


#CAID PRIO FILE : /var/keys/CCcam.prio
PROVIDERINFO FILE : /var/keys/CCcam.providers
CHANNELINFO FILE : /var/keys/CCcam.channelinfo

SERVER LISTEN PORT : 12000

WEBINFO LISTEN PORT : 15000
WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam

#Lokale Karten - (Smargo Reader)
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
#SERIAL READER : /dev/ttyUSB2 smartreader+
#SERIAL READER : /dev/ttyUSB3 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB3 600000

#Allgemeine Einstellungen
ALLOW TELNETINFO: no # Ansonsten ist PORT 16000 offen
MINIMUM DOWNHOPS: 1 # Nur Karten annehmen die weitergegeben koennen
DISABLE EMM : no # Ansonsten kommen keine Updates auf die Karten
EXTRA EMM LEVEL : no # EMM-Updates von HOP2 Clients werden angenommen
SHOW TIMING : yes # Antwortzeiten der Karten anzeigen

oscam.conf

# OSCam Konfiguration IPC - oscam.conf

[global]
serverip = 127.0.0.1
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
loghistorysize = 4096

[newcamd]
key = 0102030405060708091011121314
port = 34000@1830:003411

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 1

oscam.server

# OSCam Konfiguration IPC - oscam.server

[reader]
label = hdplus
protocol = mouse
detect = CD
group = 1
emmcache = 1,1,2
device = /dev/ttyUSB0
#n3_rsakey = BF35xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD5
#n3_boxkey = A76xxxxxxxxxx37C

oscam.user

# OSCam Konfiguration IPC - oscam.user

[account]
user = userhd
pwd = pass1
caid = 1830
hostname = localhost
uniq = 0
group = 1
au = hdplus


Hänge auch nochmal die beiden Logfiles an...

cccam.log

Nov 22 18:17:56 debian CCcam: card detect fail
Nov 22 18:17:57 debian CCcam: card detect fail
Nov 22 18:17:58 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 18:17:58 debian CCcam: newcamd ecm <- 127.0.0.1:34000 error (took 0.0109 seconds)
Nov 22 18:17:58 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0114 seconds)
Nov 22 18:17:58 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 18:17:58 debian CCcam: newcamd ecm <- 127.0.0.1:34000 failure from cache (took 0.0001 seconds)
Nov 22 18:17:58 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0011 seconds)
Nov 22 18:17:59 debian CCcam: card detect fail
Nov 22 18:17:59 debian CCcam: card detect fail
Nov 22 18:18:01 debian CCcam: card detect fail
Nov 22 18:18:02 debian CCcam: card detect fail
Nov 22 18:18:04 debian CCcam: card detect fail
Nov 22 18:18:04 debian CCcam: card detect fail
Nov 22 18:18:05 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 18:18:05 debian CCcam: newcamd ecm <- 127.0.0.1:34000 error (took 0.0110 seconds)
Nov 22 18:18:05 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0116 seconds)
Nov 22 18:18:05 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 18:18:05 debian CCcam: newcamd ecm <- 127.0.0.1:34000 failure from cache (took 0.0002 seconds)
Nov 22 18:18:05 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0010 seconds)
Nov 22 18:18:06 debian CCcam: card detect fail
Nov 22 18:18:07 debian CCcam: card detect fail
Nov 22 18:18:09 debian CCcam: card detect fail
Nov 22 18:18:09 debian CCcam: card detect fail
Nov 22 18:18:11 debian CCcam: card detect fail
Nov 22 18:18:12 debian CCcam: card detect fail
Nov 22 18:18:12 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 18:18:12 debian CCcam: newcamd ecm <- 127.0.0.1:34000 error (took 0.0110 seconds)
Nov 22 18:18:12 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0115 seconds)
Nov 22 18:18:12 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 18:18:12 debian CCcam: newcamd ecm <- 127.0.0.1:34000 failure from cache (took 0.0001 seconds)
Nov 22 18:18:12 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0009 seconds)
Nov 22 18:18:14 debian CCcam: card detect fail
Nov 22 18:18:14 debian CCcam: card detect fail


oscam.log

2011/11/22 18:13:22 1740 s newcamd: initialized (fd=6, port=34000, ip=127.0.0.1, crypted)
2011/11/22 18:13:22 1740 s CAID: 1830
2011/11/22 18:13:22 1740 s provid #0: 003411
2011/11/22 18:13:22 1740 s cccam: disabled
2011/11/22 18:13:22 1740 s radegast: disabled
2011/11/22 18:13:22 1740 s logger started (pid=1742)
2011/11/22 18:13:22 1740 s http started (pid=1743)
2011/11/22 18:13:22 1740 s reader started (pid=1744, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/11/22 18:13:22 1740 s waiting for local card init
2011/11/22 18:13:22 1743 h HTTP Server listening on port 16002
2011/11/22 18:13:24 1744 r02 card detected
2011/11/22 18:13:32 1744 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2011/11/22 18:13:33 1744 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/11/22 18:13:35 1744 r02 detect native nagra card
2011/11/22 18:13:48 1744 r02 card system not supported
2011/11/22 18:13:48 1744 r02 Normal mode failed, reverting to Deprecated Mode
2011/11/22 18:13:54 1744 r02 ATR is malformed, it reports 15 historical bytes but there are only 11
2011/11/22 18:13:55 1744 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 B3 FB B5 59 91 1D 3D 93 79
2011/11/22 18:13:56 1744 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/11/22 18:13:59 1744 r02 card system not supported
2011/11/22 18:13:59 1744 r02 card initializing error
2011/11/22 18:13:59 1740 s init for all local cards done
2011/11/22 18:13:59 1740 s anti cascading disabled
2011/11/22 18:13:59 1740 s dvbapi: dvbapi disabled
2011/11/22 18:13:59 1740 s client(1) connect from 127.0.0.1 (pid=1765, pipfd=12)
2011/11/22 18:13:59 1740 s client(2) connect from 127.0.0.1 (pid=1766, pipfd=13)
2011/11/22 18:13:59 1766 c02 Connection closed to client
2011/11/22 18:13:59 1765 c01 Connection closed to client
2011/11/22 18:14:02 1740 s client(1) connect from 127.0.0.1 (pid=1780, pipfd=12)
2011/11/22 18:14:02 1780 c01 Warning: clientdyndns disabled in config. Enable clientdyndns to use hostname restrictions
2011/11/22 18:14:02 1780 c01 encrypted newcamd:34000-client 127.0.0.1 granted (userhd, au=hdplus)
2011/11/22 18:14:02 1780 c01 user userhd authenticated successfully (CCcam)
2011/11/22 18:14:02 1780 c01 AU wont be used on this port -> disable AU
2011/11/22 18:14:02 1780 c01 userhd (1830&003411/EF15/92:E021): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:14:07 1780 c01 userhd (1830&003411/EF15/92:06F5): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:14:14 1780 c01 userhd (1830&003411/EF15/92:E6B4): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:14:21 1780 c01 userhd (1830&003411/EF15/92:7D6A): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:14:28 1780 c01 userhd (1830&003411/EF15/92:1C0C): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:14:35 1780 c01 userhd (1830&003411/EF15/92:738A): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:14:42 1780 c01 userhd (1830&003411/EF15/92:3DFB): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:14:49 1780 c01 userhd (1830&003411/EF15/92:3D77): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:14:56 1780 c01 userhd (1830&003411/EF15/92:53D6): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:03 1780 c01 userhd (1830&003411/EF15/92:1844): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:10 1780 c01 userhd (1830&003411/EF15/92:C8AD): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:17 1780 c01 userhd (1830&003411/EF15/92:5C7C): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:24 1780 c01 userhd (1830&003411/EF15/92:ED14): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:31 1780 c01 userhd (1830&003411/EF15/92:E9F5): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:38 1780 c01 userhd (1830&003411/EF15/92:5810): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:45 1780 c01 userhd (1830&003411/EF15/92:280F): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:52 1780 c01 userhd (1830&003411/EF15/92:52B2): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:15:59 1780 c01 userhd (1830&003411/EF15/92:6321): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:16:06 1780 c01 userhd (1830&003411/EF15/92:72C2): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:16:13 1780 c01 userhd (1830&003411/EF15/92:222A): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:16:20 1780 c01 userhd (1830&003411/EF15/92:E868): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:16:27 1780 c01 userhd (1830&003411/EF15/92:F15F): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:16:34 1780 c01 userhd (1830&003411/EF15/92:3295): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:16:41 1780 c01 userhd (1830&003411/EF15/92:EB95): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:16:48 1780 c01 userhd (1830&003411/EF15/92:351D): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:16:55 1780 c01 userhd (1830&003411/EF15/92:9BBB): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:02 1780 c01 userhd (1830&003411/EF15/92:CD1A): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:09 1780 c01 userhd (1830&003411/EF15/9261B): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:16 1780 c01 userhd (1830&003411/EF15/92:9452): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:23 1780 c01 userhd (1830&003411/EF15/92:2C4E): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:30 1780 c01 userhd (1830&003411/EF15/92:0F1F): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:37 1780 c01 userhd (1830&003411/EF15/92:5E9E): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:44 1780 c01 userhd (1830&003411/EF15/92:4ECC): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:51 1780 c01 userhd (1830&003411/EF15/92:E656): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:17:58 1780 c01 userhd (1830&003411/EF15/92:29FB): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:18:05 1780 c01 userhd (1830&003411/EF15/92:A8A1): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:18:12 1780 c01 userhd (1830&003411/EF15/92:FA2B): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:18:19 1780 c01 userhd (1830&003411/EF15/92:E422): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:18:26 1780 c01 userhd (1830&003411/EF15/92:9963): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:18:33 1780 c01 userhd (1830&003411/EF15/92:C24C): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:18:40 1780 c01 userhd (1830&003411/EF15/92:7CF9): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 18:18:47 1780 c01 userhd (1830&003411/EF15/92:9DB7): rejected user ident (0 ms) (no card support 1830:003411)
 
AW: Probleme bei Debian Installation auf Igel 564

du must das so machen in der cccam

#Lokale Karten - (Smargo Reader)
#SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
#SERIAL READER : /dev/ttyUSB2 smartreader+
#SERIAL READER : /dev/ttyUSB3 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB3 600000



Da der usb 0 schon von oscam genutzt wird
 
AW: Probleme bei Debian Installation auf Igel 564

Tut sich irgendwie immer noch nichts, obwohl bei Oscam es schon sehr gut aussieht...

Oscam.log

2011/11/22 19:05:46 1026 s client(1) connect from 127.0.0.1 (pid=1206, pipfd=12)
2011/11/22 19:05:46 1206 c01 Warning: clientdyndns disabled in config. Enable clientdyndns to use hostname restrictions
2011/11/22 19:05:46 1206 c01 encrypted newcamd:34000-client 127.0.0.1 granted (userhd, au=hdplus)
2011/11/22 19:05:46 1206 c01 user userhd authenticated successfully (CCcam)
2011/11/22 19:05:46 1206 c01 AU wont be used on this port -> disable AU
2011/11/22 19:07:49 1206 c01 userhd (1830&003411/EF10/92:8819): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:08:00 1206 c01 userhd (1830&003411/EF74/92:F013): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:09:53 1206 c01 userhd (1830&003411/EF10/92:4A08): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:09:53 1206 c01 userhd (1830&003411/EF10/92:CD28): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:00 1206 c01 userhd (1830&003411/EF15/92:51E1): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:00 1206 c01 userhd (1830&003411/EF15/92:6D25): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:07 1206 c01 userhd (1830&003411/EF15/92:F8EF): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:14 1206 c01 userhd (1830&003411/EF15/92:6CFC): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:21 1206 c01 userhd (1830&003411/EF15/92:B938): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:28 1206 c01 userhd (1830&003411/EF15/92:8453): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:35 1206 c01 userhd (1830&003411/EF15/92:7466): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:42 1206 c01 userhd (1830&003411/EF15/92:3437): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:49 1206 c01 userhd (1830&003411/EF15/92:6523): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:10:56 1206 c01 userhd (1830&003411/EF15/92:39B8): rejected user ident (0 ms) (no card support 1830:003411)
2011/11/22 19:11:03 1206 c01 userhd (1830&003411/EF15/92:71BF): rejected user ident (0 ms) (no card support 1830:003411)

ccam.log

Nov 22 19:12:48 debian CCcam: newcamd ecm -> 127.0.0.1:34000
 Nov 22 19:12:48 debian CCcam: newcamd ecm <- 127.0.0.1:34000 error (took 0.0116 seconds)
Nov 22 19:12:48 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0121 seconds)
Nov 22 19:12:48 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 19:12:48 debian CCcam: newcamd ecm <- 127.0.0.1:34000 failure from cache (took 0.0001 seconds)
Nov 22 19:12:48 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0009 seconds)
Nov 22 19:12:49 debian CCcam: card detect fail
Nov 22 19:12:50 debian CCcam: card detect fail
Nov 22 19:12:52 debian CCcam: card detect fail
Nov 22 19:12:54 debian CCcam: card detect fail
Nov 22 19:12:55 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 19:12:55 debian CCcam: newcamd ecm <- 127.0.0.1:34000 error (took 0.0114 seconds)
Nov 22 19:12:55 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0119 seconds)
Nov 22 19:12:55 debian CCcam: newcamd ecm -> 127.0.0.1:34000
Nov 22 19:12:55 debian CCcam: newcamd ecm <- 127.0.0.1:34000 failure from cache (took 0.0001 seconds)
Nov 22 19:12:55 debian CCcam: client user02 ecm request for handler 0x64 0x1830(0x0) sid 0xef15 ok: 0 (took 0.0010 seconds)
Nov 22 19:12:56 debian CCcam: card detect fail
Nov 22 19:12:56 debian CCcam: login from 217.228.112.223
Nov 22 19:12:56 debian CCcam: user user13 login attempt from 217.228.112.223
Nov 22 19:12:56 debian CCcam: wrong password supplied by 217.228.112.223
Nov 22 19:12:56 debian CCcam: kick 217.228.112.223, signature failed
Nov 22 19:12:57 debian CCcam: card detect fail
Nov 22 19:12:59 debian CCcam: card detect fail
Nov 22 19:13:01 debian CCcam: card detect fail
 
AW: Probleme bei Debian Installation auf Igel 564

Hast du den server auch neu gestartet und lass mal nur die hd+ laufen
 
AW: Probleme bei Debian Installation auf Igel 564

hab ich gemacht!
hab jetzt nur den Smargo mit der hd+ Karte drin am laufen...
da kommt dann das...

2011/11/22 19:26:01 1013 s 2218 service-id's loaded
2011/11/22 19:26:01 1013 s can't open file "/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2011/11/22 19:26:01 1013 s can't open file "/var/etc/oscam.provid" (err=2), no provids's loaded
2011/11/22 19:26:01 1022 s monitor: disabled
2011/11/22 19:26:01 1022 s camd 3.3x: disabled
2011/11/22 19:26:01 1022 s camd 3.5x: disabled
2011/11/22 19:26:01 1022 s cs378x: disabled
2011/11/22 19:26:01 1022 s newcamd: initialized (fd=6, port=34000, ip=127.0.0.1, crypted)
2011/11/22 19:26:01 1022 s CAID: 1830
2011/11/22 19:26:01 1022 s provid #0: 003411
2011/11/22 19:26:01 1022 s cccam: disabled
2011/11/22 19:26:01 1022 s radegast: disabled
2011/11/22 19:26:01 1022 s logger started (pid=1024)
2011/11/22 19:26:01 1022 s http started (pid=1025)
2011/11/22 19:26:01 1025 h HTTP Server listening on port 16002
2011/11/22 19:26:01 1022 s reader started (pid=1026, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/11/22 19:26:01 1022 s waiting for local card init
2011/11/22 19:26:04 1026 r02 card detected
2011/11/22 19:26:14 1026 r02 Error activating card.
2011/11/22 19:26:25 1026 r02 Error activating card.
2011/11/22 19:26:36 1026 r02 Error activating card.
2011/11/22 19:26:47 1026 r02 Error activating card.
 
AW: Probleme bei Debian Installation auf Igel 564

lief den die HD+ Karte sonst in dem Smargo
Und welche Oscam Version hast du
 
AW: Probleme bei Debian Installation auf Igel 564

Ja, bei meiner Freetz läuft alles.
OSCam cardserver v0.99.4svn, build #3035 (i686-pc-linux) - (w) 2009-2010 streamboard SVN
 
AW: Probleme bei Debian Installation auf Igel 564

manchmal hilft eine neuere Version Wunder
 
AW: Probleme bei Debian Installation auf Igel 564

Ich habe die 6018 am laufen
 
AW: Probleme bei Debian Installation auf Igel 564

werde ich morgen mal versuchen...melde mich dann wieder.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

A
( gelöst ) habe einen Igel Thin Client 564 LX mit Debian 3.2.63-2+deb7u2 i686 und würde den gern aktualisieren
2 3
Antworten
32
Aufrufe
5K
auiwald
A
Igel neu aufsetzen
Antworten
3
Aufrufe
2K
Osprey
IGEL nach Installation von Debian9 Start im " grub rescue"
Antworten
2
Aufrufe
2K
NEODARK
Raspberry Pi 4B (4Gb) mit IPC (,PS4HEN, Homebridge & ownCloud) unter Raspbian Buster
Antworten
1
Aufrufe
3K
RuckZuck
B
Igel Thin Client UD5 H700C Probleme bein Installieren von Debian
Antworten
8
Aufrufe
4K
Sat0007
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…