Problem Oscam #9453

[Duke2k5]

Hallo, wollte mal auf meiner Clientbox ne neue Oscamversion ausprobieren. Leider klappt es noch nicht...Hier mal ein Log

Log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:00:55 2000
-------------------------------------------------------------------------------
2000/01/01 01:00:55 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9453 (mipsel-oe-linux)
2000/01/01 01:00:55 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 899
2000/01/01 01:00:55 0 s The current system time is smaller than the build date (Jan 26 2014). Waiting up to 60 seconds for time to correct
2000/01/01 01:01:56 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:01:57 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2000/01/01 01:01:57 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:01:57 0 s signal handling initialized
2000/01/01 01:01:57 0 s 414 service-id's loaded in 27ms
2000/01/01 01:01:57 0 s KabelDeutschland [internal] creating thread for device /dev/sci0
2000/01/01 01:01:57 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 01:01:57 0 s waiting for local card init
2000/01/01 01:01:57 516690 h webif: decompressed 68257 bytes back into 192688 bytes
2000/01/01 01:01:57 516690 h HTTP Server running. ip=0.0.0.0 port=4000
2000/01/01 01:01:57 52F158 r KabelDeutschland [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=2700, cardmhz=450)
2000/01/01 01:01:58 52F158 r KabelDeutschland [internal] card detected
2000/01/01 01:01:59 52F158 r KabelDeutschland [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2000/01/01 01:01:59 52F158 r KabelDeutschland [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2000/01/01 01:01:59 52F158 r KabelDeutschland [internal] Calculated work ETU is 13.78 us reader mhz = 2700
2000/01/01 01:01:59 52F158 r KabelDeutschland [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2000/01/01 01:02:00 52F158 r KabelDeutschland [internal] card system not supported
2000/01/01 01:02:00 52F158 r KabelDeutschland [internal] Normal mode failed, reverting to Deprecated Mode
2000/01/01 01:02:01 52F158 r KabelDeutschland [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2000/01/01 01:02:01 52F158 r KabelDeutschland [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2000/01/01 01:02:01 52F158 r KabelDeutschland [internal] Calculated work ETU is 13.78 us reader mhz = 2700
2000/01/01 01:02:01 52F158 r KabelDeutschland [internal] ATR Fsmax is 5 MHz, clocking card to 27.00 (specified in reader->mhz)
2000/01/01 01:02:02 52F158 r KabelDeutschland [internal] card system not supported
2000/01/01 01:02:02 52F158 r KabelDeutschland [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2000/01/01 01:02:02 52F158 r KabelDeutschland [internal] card initializing error
2000/01/01 01:02:03 0 s init for all local cards done
2000/01/01 01:02:03 0 s anti cascading disabled
2000/01/01 01:02:03 531A48 c plain dvbapi-client granted (local, au=auto (3 reader))
2000/01/01 01:02:03 531A48 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/02/16 08:31:17 531A48 c *** WARNING: BAD TIME AFFECTING WHOLE OSCAM ECM HANDLING ****
2014/02/16 08:31:17 531A48 c [DVBAPI] Receiver sends PMT command 3 for channel C35C
2014/02/16 08:31:17 531A48 c [DVBAPI] Receiver wants to demux srvid C35C on adapter 0000 camask 0008 index 0003 pmtpid 0068
2014/02/16 08:31:17 531A48 c [ADD PID 0] CAID: 1861 ECM_PID: 19F5 PROVID: 000000
2014/02/16 08:31:17 531A48 c [ADD PID 1] CAID: 09C7 ECM_PID: 19F9 PROVID: 000000
2014/02/16 08:31:17 531A48 c Found 2 ECMpids and 4 STREAMpids in PMT
2014/02/16 08:31:17 531A48 c [DVBAPI] Receiver wants to demux srvid C35C on adapter 0000 camask 0008 index 0003 pmtpid 0068
2014/02/16 08:31:17 531A48 c New program number: C35C (1861:C35C unknown) [pmt_list_management 3]
2014/02/16 08:31:17 531A48 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/02/16 08:31:17 531A48 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!

oscam.server

Spoiler

[reader]
label = KabelDeutschland
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 2700
cardmhz = 450
group = 1
emmcache = 1,1,2
lb_weight = 300
ndsversion = 2

 

[dodo83]

AW: Problem Oscam #9453

mhz/cardmhz anpassen =>> https://www.digital-eliteboard.com/...Karten/page5&p=2091877&viewfull=1#post2091877

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = KabelDeutschland[/COLOR]
[COLOR=#3E3E3E]enable = 0[/COLOR]
[COLOR=#3E3E3E]protocol = internal[/COLOR]
[COLOR=#3E3E3E]device = /dev/sci0[/COLOR]
[COLOR=#3E3E3E]caid = 09C7[/COLOR]
[COLOR=#3E3E3E]boxid = 12345678[/COLOR]
[COLOR=#3E3E3E]ins7e11 = 15[/COLOR]
[COLOR=#3E3E3E]detect = cd[/COLOR]
[COLOR=#ff0000]mhz = 1
cardmhz = 2700[/COLOR]
[COLOR=#3E3E3E]group = 1[/COLOR]
[COLOR=#3E3E3E]emmcache = 1,1,2[/COLOR]
[COLOR=#3E3E3E]lb_weight = 300[/COLOR]
[COLOR=#3E3E3E]ndsversion = 2[/COLOR]

oscam neu starten

 

[Duke2k5]

AW: Problem Oscam #9453

Vielen Dank es läuft!!! Wäre das bei der D02 genauso??

Spoiler

[reader]
label = Sky
enable = 0
protocol = internal
device = /dev/sci0
caid = 1722
boxkey = 1122334455667788
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,3,2
lb_weight = 300

 

[4gx35]

AW: Problem Oscam #9453

d02 geht besser mit alternativen einstellungen Link ist nicht mehr aktiv.

 

[Duke2k5]

AW: Problem Oscam #9453

D02 läuft mit Oscam 9536 mit 490ms,vorher ca 800ms. (Einstellungen nach obiger Anleitung..)
Vielen Dank