Aktuelles
Von:
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Problem mit neuer XXX Astra Karte

AW: Problem mit neuer XXX Astra Karte

Hallo razorback,
hallo Skyrider79,
liebe Freetz-Freunde,
ich finde es wirklich bemerkenswert, dass ihr nicht locker lasst, obwohl ich die Flinte schon 3x ins Korn werfen wollte. Toll! Das macht Mut ... Vielleicht ist der Fehler ja doch noch zu finden.
Hoffe erstmal, dass ich jetzt das richtig Protokoll habe.

Zur besseren Orientierung gebe ich nochmal die gesamte Konfigurationen rein. Mittlerweile hat sich doch allerhand geändert. Am Ende folgt dann das Protokoll. Zwei Anmerkungen dazu. Dort wo sich Anfragen augenscheinlich 50x wiederholt haben, habe ich die Wiederholungen gelöscht, weil nur andere Sekunden angegeben wurden. Ihr seht das an dem Leerzeichen [....]. Und die Seriennummern der Viaccess Karten habe ich ebenfalls rausgenommen bzw. durch Platzhalter ersetzt. Ich denke, das macht Sinn. Wäre toll, wenn der Fehler doch noch gefunden würde.

CCcam.cfg

######################################
# #
# Digital Eliteboard - Das grosse Technik Board #
# #
#######################################






###############
### server ####
###############


F: test fritz 0 0 1 { 0:0:2 }
F: test1 fritz1 0 0 1 { 0:0:2 }
F: test2 fritz2 0 0 1 { 0:0:2 }
F: test3 fritz3 0 0 1 { 0:0:2 }
F: test4 fritz4 0 0 1 { 0:0:2 }
F: test6 fritz6 0 0 1 { 0:0:2 }
F: test8 fritz8 0 0 1 { 0:0:2 }
F: test9 fritz9 0 0 1 { 0:0:2 }
F: test10 fritz10 0 0 1 { 0:0:2 }
F: test11 fritz11 0 0 1 { 0:0:2 }
F: test12 fritz12 0 0 1 { 0:0:2 }
F: test13 fritz13 0 0 1 { 0:0:2 }
F: test14 fritz14 0 0 1 { 0:0:2 }
F: test15 fritz15 0 0 1 { 0:0:2 }




SERVER LISTEN PORT : 33359
WEBINFO LISTEN PORT : 16001
TELNETINFO LISTEN PORT : 16000


SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000




WEBINFO USERNAME : cccam
WEBINFO PASSWORD : cccam
SHOW TIMING : yes
MINIMUM DOWNHOPS: 1
ALLOW WEBINFO: yes
SHOW TIMING : yes
DEBUG : yes
TRY ALL CHIDS : /dev/ttyUSB0
#SMARTCARD SID REJECT: /dev/ttyUSB0 { e419 }
#EMM Blocker : no
#DISABLE EMM : no
#EXTRA EMM LEVEL : yes
#ALLOW TELNETINFO: yes
#TELNETINFO USERNAME : cccam
#TELNETINFO PASSWORD : cccam
#SHOW EXTENEDED CLIENT INFO : yes




SOFTKEY FILE : /var/media/ftp/uStor01/cs/cccam/SoftCam.Key
AUTOROLL FILE : /var/media/ftp/uStor01/cs/cccam/AutoRoll.Key
STATIC CW FILE : /var/media/ftp/uStor01/cs/cccam/constant.cw
CAID PRIO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.prio
PROVIDERINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.providers
CHANNELINFO FILE : /var/media/ftp/uStor01/cs/cccam/CCcam.channelinfo
LOG WARNINGS : /var/media/ftp/uStor01/cs/cccam/warnings.txt
cccam Log : /var/media/ftp/uStor01/cs/cccam/cccamlog.txt


N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 50001 test3 test4 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 50002 test5 test6 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 50003 test7 test8 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
N: 127.0.0.1 50004 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

oscam.Config

# oscam.conf generated automatically by Streamboard oscam 1.10 buikd 5705
# Read more: oscam.conf.txt in trunk/Distribution/doc/txt




[global]
logfile = /var/media/ftp/uStor01/logs/oscam.log
fallbacktimeout = 2500
clientmaxidle = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 500
saveinithistory = 1
readerrestartseconds = 5
unlockparental = 1
lb_mode = 1
lb_save = 500
lb_savepath = /tmp/.oscam/stat
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_use_locking = 1




[monitor]
port = 988
nocrypt = 192.168.178.0-192.168.178.255
hideclient_to = 15
appendchaninfo = 0




[newcamd]
port = 34000@1830:000000,003411,008011;34002@1702:000000;50001@0500:043800;50002@0500:042740;50003@0500:041700;50004@0500:050F00
key = 0102030405060708091011121314
allowed = 0.0.0.0-255.255.255.255
keepalive = 1
mgclient = 0




[cccam]
port = 33359
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.2.1
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
nodeid =
reshare_mode = 0




[webif]
httpport = 8888
httphelplang = de
httpuser = ines
httppwd = pass
httprefresh = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpsavefullcfg = 1

oscam.Servers

#######################################
# #
# Digital Eliteboard - Das grosse Technik Board #
# #
#######################################




[reader]
label = HD+
Protocol = mouse
detect = CD
device = /dev/ttyUSB1
group = 1
CAID = 1830
emmcache = 1,3,2
rsakey = BF ... DD5
boxkey = A7.. C
mhz = 357
cardmhz = 357


[reader]
Label = Redlight
Protocol = Phoenix
device = /dev/ttyUSB2
Mhz = 357
cardmhz = 357
Detect = CD
Group = 2
CAID = 0500
ident = 0500:043800
EMMCache = 1,3,2




[reader]
Label = Penthouse
Protocol = Phoenix
device = /dev/ttyUSB3
Mhz = 357
cardmhz = 357
Detect = CD
Group = 3
CAID = 0500
ident = 0500:042740
EMMCache = 1,3,2




[reader]
Label = Private
Protocol = Phoenix
device = /dev/ttyUSB4
Mhz = 357
cardmhz = 357
Detect = CD
Group = 4
CAID = 0500
ident = 0500:041700
EMMCache = 1,3,2


[reader]
Label = Hustler
Protocol = Phoenix
device = /dev/ttyUSB5
Mhz = 357
cardmhz = 357
Detect = CD
Group = 5
CAID = 0500
ident = 0500:050F00
EMMCache = 1,3,2




oscam.Services

# oscam.services generated automatically by Streamboard oscam 1.10 buikd 5705
# Read more:
Sie müssen registriert sein, um Links zu sehen.





caid = 1702,1830
provid = 000000
srvid = 0008,0009,000A,000B,000C,000D,000E,0010,0011,0012, 0013,0014,0015,0016,0017,0018,0019,001A,001B,001C, 001D,0021,0022,0023,0024,0025,0026,0027,0029,002A, 002B,0032,0034,0035,0037,0038,0039,003A,003C,003D, 003E,003F,0040,0041,0042,0043,0044,0074,007D,0096, 0097,0098,0099,009A,009B,009C,00A8,00DD,00DE,00DF, 00FC,00FD,0106,0107,0110,0111,011A,011B,0124,0125, 012E,012F,0138,0139,0142,0143,014C,014D,0156,0160, 016B,0175,0201,0203,0204,0206,07FF,2EFE,3331,4461, 4462,7001,700A,0077,0072,006A,006B,006F,0070,0071, 0081,0082,0083,0084,0069,EF10,EF11,EF14,EF15,EF74, EF75,EF76,EF77,5273,5274,1519,6FB8




[Redlight]
caid = 0500
provid = 043800
srvid = 4225,000A,227B,35C0,35C1,35C2,35C3,35C4,35C6,35C7,35C8,3787,378A,378D,43B3,4223,4224,4225




[Penthouse]
caid = 0500
provid = 042740
srvid = 0014,000A,001E




[Private]
caid = 0500
provid = 041700
srvid = 1299,129A,1251


[Hustler]
caid = 0500
provid = 050F00
srvid = 07FA,07FD




oscam.Users

#######################################
# #
# Digital Eliteboard - Das grosse Technik Board #
# #
#######################################




[account]
user = user
pwd = pass
group = 1
au = HD+


[account]
user = test3
pwd = test4
group = 2
AU = 1




[account]
user = test5
pwd = test6
group = 3
AU = 1




[account]
user = test7
pwd = test8
group = 4
AU = 1


[account]
user = test1
pwd = test2
group = 5
AU = 1

So, und nun das Protokoll. Ich bin mal gespannt, ob jemand den Fehler findet. Würde mich wirklich freuen. Ach ja, ich habe es zwar schon x-mal gesagt, aber nur zur Sicherheit. Alle Karten laufen S02, HD01 usw. - nur die Viaccess auf USB5 - also die neue XXX-Astra Karte nicht.

Protokoll

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Aug 15 19:01:42 2012
-------------------------------------------------------------------------------
2012/08/15 19:01:42 400 s >> OSCam << cardserver started, version 1.00 -DEB-Freetz--Prof.Linux- , build #5236 (mipsel-router-linux-uclibc929)
2012/08/15 19:01:42 400 s version=1.00 -DEB-Freetz--Prof.Linux- , build #5236, system=mipsel-router-linux, nice=-1
2012/08/15 19:01:42 400 s client max. idle=120 sec, debug level=0
2012/08/15 19:01:42 400 s max. logsize=500 Kb, loghistorysize=4096 bytes
2012/08/15 19:01:42 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/08/15 19:01:42 400 s services reloaded: 0 services freed, 4 services loaded
2012/08/15 19:01:42 400 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2012/08/15 19:01:42 400 s signal handling initialized (type=sysv)
2012/08/15 19:01:42 400 s 323 service-id's loaded in 26ms
2012/08/15 19:01:42 400 s 116 tier-id's loaded
2012/08/15 19:01:42 400 s 3 provid's loaded
2012/08/15 19:01:42 400 s 22 lengths for caid guessing loaded
2012/08/15 19:01:42 400 s monitor: initialized (fd=8, port=988)
2012/08/15 19:01:42 400 s camd33: disabled
2012/08/15 19:01:42 400 s camd35: disabled
2012/08/15 19:01:42 400 s cs378x: disabled
2012/08/15 19:01:42 400 s newcamd: initialized (fd=9, port=34000, crypted)
2012/08/15 19:01:42 400 s CAID: 1830
2012/08/15 19:01:42 400 s provid #0: 000000
2012/08/15 19:01:42 400 s provid #1: 003411
2012/08/15 19:01:42 400 s provid #2: 008011
2012/08/15 19:01:42 400 s newcamd: initialized (fd=10, port=34002, crypted)
2012/08/15 19:01:42 400 s CAID: 1702
2012/08/15 19:01:42 400 s provid #0: 000000
2012/08/15 19:01:42 400 s newcamd: initialized (fd=11, port=50001, crypted)
2012/08/15 19:01:42 400 s CAID: 0500
2012/08/15 19:01:42 400 s provid #0: 043800
2012/08/15 19:01:42 400 s newcamd: initialized (fd=12, port=50002, crypted)
2012/08/15 19:01:42 400 s CAID: 0500
2012/08/15 19:01:42 400 s provid #0: 042740
2012/08/15 19:01:42 400 s newcamd: initialized (fd=13, port=50003, crypted)
2012/08/15 19:01:42 400 s CAID: 0500
2012/08/15 19:01:42 400 s provid #0: 041700
2012/08/15 19:01:42 400 s newcamd: initialized (fd=14, port=50004, crypted)
2012/08/15 19:01:42 400 s CAID: 0500
2012/08/15 19:01:42 400 s provid #0: 050F00
2012/08/15 19:01:42 400 s cccam: Bind request failed, waiting another 119 seconds
[...]
2012/08/15 19:03:42 400 s cccam: Bind request failed, waiting another 1 seconds
2012/08/15 19:03:43 400 s cccam: Bind request failed, giving up
2012/08/15 19:03:43 400 s radegast: disabled
2012/08/15 19:03:43 400 s http thread started
2012/08/15 19:03:43 400 s creating thread for device /dev/ttyUSB1
2012/08/15 19:03:43 400 s creating thread for device /dev/ttyUSB2
2012/08/15 19:03:43 400 s creating thread for device /dev/ttyUSB3
2012/08/15 19:03:43 400 s creating thread for device /dev/ttyUSB4
2012/08/15 19:03:43 400 s creating thread for device /dev/ttyUSB5
2012/08/15 19:03:43 400 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/15 19:03:43 400 s waiting for local card init
2012/08/15 19:03:43 C04 h HTTP Server couldn't bind on port 8888 (errno=125 Address already in use). Not starting HTTP!
2012/08/15 19:03:43 1005 r reader thread started (thread= 1005, label=hd+, device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2012/08/15 19:03:43 1406 r reader thread started (thread= 1406, label=redlight, device=/dev/ttyUSB2, detect=cd, mhz=357, cardmhz=357)
2012/08/15 19:03:43 1807 r reader thread started (thread= 1807, label=penthouse, device=/dev/ttyUSB3, detect=cd, mhz=357, cardmhz=357)
2012/08/15 19:03:43 1C08 r reader thread started (thread= 1C08, label=private, device=/dev/ttyUSB4, detect=cd, mhz=357, cardmhz=357)
2012/08/15 19:03:43 2009 r reader thread started (thread= 2009, label=hustler, device=/dev/ttyUSB5, detect=cd, mhz=357, cardmhz=357)
2012/08/15 19:03:46 1807 r penthouse card detected
2012/08/15 19:03:46 1C08 r private card detected
2012/08/15 19:03:46 1406 r redlight card detected
2012/08/15 19:03:46 2009 r hustler card detected
2012/08/15 19:03:46 1005 r hd+ card detected
2012/08/15 19:03:50 1807 r ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00
2012/08/15 19:03:50 1C08 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 19:03:50 2009 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 19:03:50 1406 r ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2012/08/15 19:03:51 1005 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/08/15 19:03:52 1C08 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:52 1807 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:52 2009 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:52 1406 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:53 1005 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:53 1807 r card system not supported
2012/08/15 19:03:53 1807 r Normal mode failed, reverting to Deprecated Mode
2012/08/15 19:03:54 1005 r detect native nagra card
2012/08/15 19:03:55 1005 r -----------------------------------------
2012/08/15 19:03:55 1005 r |id |tier |valid from |valid to |
2012/08/15 19:03:55 1005 r +----+--------+------------+------------+
2012/08/15 19:03:55 1005 r |8011|0064 |2010/11/20 |2011/11/21 |
2012/08/15 19:03:55 1005 r |8011|0065 |1992/01/01 |1993/01/01 |
2012/08/15 19:03:55 1005 r |8011|0BEA |2011/11/09 |2012/12/14 |
2012/08/15 19:03:55 1005 r -----------------------------------------
2012/08/15 19:03:56 1406 r card system not supported
2012/08/15 19:03:56 1406 r Normal mode failed, reverting to Deprecated Mode
2012/08/15 19:03:56 1C08 r card system not supported
2012/08/15 19:03:56 1C08 r Normal mode failed, reverting to Deprecated Mode
2012/08/15 19:03:56 2009 r card system not supported
2012/08/15 19:03:56 2009 r Normal mode failed, reverting to Deprecated Mode
2012/08/15 19:03:56 1005 r WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2012/08/15 19:03:56 1005 r found cardsystem nagra
2012/08/15 19:03:56 1005 r ROM: D N A S P 1 4 2
2012/08/15 19:03:56 1005 r REV: R e v G C 6
2012/08/15 19:03:56 1005 r SER: 48 EA E6 0C
2012/08/15 19:03:56 1005 r CAID: 1830
2012/08/15 19:03:56 1005 r Prv.ID: 00 00 34 11 (sysid)
2012/08/15 19:03:56 1005 r Prv.ID: 00 00 00 00
2012/08/15 19:03:56 1005 r Prv.ID: 00 00 80 11
2012/08/15 19:03:56 1005 r [nagra-reader] ready for requests
2012/08/15 19:03:58 1807 r ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00
2012/08/15 19:03:58 1807 r Warning: D=0 is invalid, forcing D=1
2012/08/15 19:03:59 1807 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:04:00 1807 r card system not supported
2012/08/15 19:04:00 1807 r card initializing error
2012/08/15 19:04:00 1406 r ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2012/08/15 19:04:00 1406 r Warning: D=0 is invalid, forcing D=1
2012/08/15 19:04:00 1C08 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 19:04:00 1C08 r Warning: D=0 is invalid, forcing D=1
2012/08/15 19:04:00 2009 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 19:04:00 2009 r Warning: D=0 is invalid, forcing D=1
2012/08/15 19:04:01 1406 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:04:01 1C08 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:04:01 2009 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:04:02 1C08 r [viaccess-reader] using ecm #61f for long viaccess ecm
2012/08/15 19:04:02 2009 r [viaccess-reader] using ecm #608 for long viaccess ecm
2012/08/15 19:04:02 1406 r [viaccess-reader] using ecm #60d for long viaccess ecm
2012/08/15 19:04:03 1C08 r type: Viaccess (standard atr), caid: 0500, serial: 1010101010
2012/08/15 19:04:03 2009 r type: Viaccess (standard atr), caid: 0500, serial: 1212121212
2012/08/15 19:04:03 1406 r type: Viaccess (standard atr), caid: 0500, serial: 1313131313
2012/08/15 19:04:03 1C08 r providers: 2 (FFFD00,042740)
2012/08/15 19:04:03 1C08 r [viaccess-reader] Using PIN 0000!
2012/08/15 19:04:03 1406 r providers: 2 (FFF8F0,043800)
2012/08/15 19:04:03 1406 r [viaccess-reader] Using PIN 0000!
2012/08/15 19:04:03 1C08 r [viaccess-reader] Parental lock disabled
2012/08/15 19:04:03 1C08 r [viaccess-reader] ready for requests
2012/08/15 19:04:03 1C08 r found cardsystem viaccess
2012/08/15 19:04:03 1C08 r [viaccess-reader] card detected
2012/08/15 19:04:03 1406 r [viaccess-reader] Parental lock disabled
2012/08/15 19:04:03 1406 r [viaccess-reader] ready for requests
2012/08/15 19:04:03 1406 r found cardsystem viaccess
2012/08/15 19:04:03 1406 r [viaccess-reader] card detected
2012/08/15 19:04:03 1C08 r [viaccess-reader] serial: 1010101010
2012/08/15 19:04:03 2009 r providers: 3 (FFF830,041700,041710)
2012/08/15 19:04:03 2009 r [viaccess-reader] Using PIN 0000!
2012/08/15 19:04:03 1406 r [viaccess-reader] serial: 1313131313
2012/08/15 19:04:03 2009 r [viaccess-reader] Parental lock disabled
2012/08/15 19:04:03 2009 r [viaccess-reader] ready for requests
2012/08/15 19:04:03 2009 r found cardsystem viaccess
2012/08/15 19:04:03 2009 r [viaccess-reader] card detected
2012/08/15 19:04:04 2009 r [viaccess-reader] serial: 1212121212
2012/08/15 19:04:04 1C08 r provider: 1, id: FFFD00, name: ISSUER, sa: BFBA7C9F, geo: empty
2012/08/15 19:04:04 1406 r provider: 1, id: FFF8F0, name: Redlight, sa: BE4E627D, geo: empty
2012/08/15 19:04:04 2009 r provider: 1, id: FFF830, name: ISSUER, sa: BF3E96E8, geo: empty
2012/08/15 19:04:04 1C08 r provider: 2, id: 042740, name: PENTHOUSE HDTV, sa: BFBA7C9F, geo: FF FF FF FF
2012/08/15 19:04:04 1406 r provider: 2, id: 043800, name: Redlight, sa: BE4E627D, geo: FF FF FF FF
2012/08/15 19:04:05 1C08 r class: 0A, expiry date: 2012/04/26 - 2013/05/31
2012/08/15 19:04:05 1C08 r class: 0B, expiry date: 2012/04/26 - 2013/05/31
2012/08/15 19:04:05 1C08 r class: 0C, expiry date: 2012/04/26 - 2013/05/31
2012/08/15 19:04:05 1406 r class: 01, expiry date: 2012/05/23 - 2012/11/18
2012/08/15 19:04:05 2009 r provider: 2, id: 041700, sa: BF3E96E8, geo: FF FF FF FF
2012/08/15 19:04:05 2009 r class: F6, expiry date: 2012/08/05 - 2013/08/04
2012/08/15 19:04:05 2009 r provider: 3, id: 041710, sa: BF3E96E8, geo: FF FF FF FF
2012/08/15 19:04:06 400 s init for all local cards done
2012/08/15 19:04:06 2404 c client connected to 34000 port
2012/08/15 19:04:06 2404 c Connection closed to client
2012/08/15 19:04:06 2404 c thread 2404 ended!
2012/08/15 19:04:06 280A c client connected to 50001 port
2012/08/15 19:04:06 280A c Connection closed to client
2012/08/15 19:04:06 280A c thread 280A ended!
2012/08/15 19:04:06 2C0B c client connected to 50002 port
2012/08/15 19:04:06 2C0B c Connection closed to client
2012/08/15 19:04:06 2C0B c thread 2C0B ended!
2012/08/15 19:04:06 300C c client connected to 50003 port
2012/08/15 19:04:06 300C c Connection closed to client
2012/08/15 19:04:06 300C c thread 300C ended!
2012/08/15 19:04:06 340D c client connected to 50004 port
2012/08/15 19:04:06 340D c Connection closed to client
2012/08/15 19:04:06 340D c thread 340D ended!
2012/08/15 19:04:06 380E c client connected to 34000 port
2012/08/15 19:04:06 380E c Connection closed to client
2012/08/15 19:04:06 380E c thread 380E ended!
2012/08/15 19:04:06 3C0F c client connected to 50001 port
2012/08/15 19:04:06 3C0F c Connection closed to client
2012/08/15 19:04:06 3C0F c thread 3C0F ended!
2012/08/15 19:04:06 4010 c client connected to 50002 port
2012/08/15 19:04:06 4010 c Connection closed to client
2012/08/15 19:04:06 4010 c thread 4010 ended!
2012/08/15 19:04:06 4411 c client connected to 50003 port
2012/08/15 19:04:06 4411 c Connection closed to client
2012/08/15 19:04:06 4411 c thread 4411 ended!
2012/08/15 19:04:06 4812 c client connected to 50004 port
2012/08/15 19:04:06 4812 c Connection closed to client
2012/08/15 19:04:06 4812 c thread 4812 ended!
2012/08/15 19:04:06 4C13 c client connected to 34000 port
2012/08/15 19:04:06 4C13 c Connection closed to client
2012/08/15 19:04:06 4C13 c thread 4C13 ended!
2012/08/15 19:04:06 5014 c client connected to 50001 port
2012/08/15 19:04:06 5014 c Connection closed to client
2012/08/15 19:04:06 5014 c thread 5014 ended!
2012/08/15 19:04:06 5415 c client connected to 50002 port
2012/08/15 19:04:06 5415 c Connection closed to client
2012/08/15 19:04:06 5415 c thread 5415 ended!
2012/08/15 19:04:06 5816 c client connected to 50003 port
2012/08/15 19:04:06 5816 c Connection closed to client
2012/08/15 19:04:06 5816 c thread 5816 ended!
2012/08/15 19:04:06 5C17 c client connected to 50004 port
2012/08/15 19:04:06 5C17 c Connection closed to client
2012/08/15 19:04:06 5C17 c thread 5C17 ended!
2012/08/15 19:04:06 6018 c client connected to 34000 port
2012/08/15 19:04:06 6018 c Connection closed to client
2012/08/15 19:04:06 6018 c thread 6018 ended!
2012/08/15 19:04:06 6419 c client connected to 50001 port
2012/08/15 19:04:06 6419 c Connection closed to client
2012/08/15 19:04:06 6419 c thread 6419 ended!
2012/08/15 19:04:06 681A c client connected to 50002 port
2012/08/15 19:04:06 681A c Connection closed to client
2012/08/15 19:04:06 681A c thread 681A ended!
2012/08/15 19:04:06 6C1B c client connected to 50003 port
2012/08/15 19:04:07 6C1B c Connection closed to client
2012/08/15 19:04:07 6C1B c thread 6C1B ended!
2012/08/15 19:04:07 701C c client connected to 50004 port
2012/08/15 19:04:07 701C c Connection closed to client
2012/08/15 19:04:07 701C c thread 701C ended!
2012/08/15 19:04:07 741D c client connected to 34000 port
2012/08/15 19:04:07 741D c Connection closed to client
2012/08/15 19:04:07 741D c thread 741D ended!
2012/08/15 19:04:07 781E c client connected to 50001 port
2012/08/15 19:04:07 781E c Connection closed to client
2012/08/15 19:04:07 781E c thread 781E ended!
2012/08/15 19:04:07 7C1F c client connected to 50002 port
2012/08/15 19:04:07 7C1F c Connection closed to client
2012/08/15 19:04:07 7C1F c thread 7C1F ended!
2012/08/15 19:04:07 8020 c client connected to 50003 port
2012/08/15 19:04:07 8020 c Connection closed to client
2012/08/15 19:04:07 8020 c thread 8020 ended!
2012/08/15 19:04:07 8421 c client connected to 50004 port
2012/08/15 19:04:07 8421 c Connection closed to client
2012/08/15 19:04:07 8421 c thread 8421 ended!
2012/08/15 19:04:07 8822 c client connected to 34000 port
2012/08/15 19:04:07 8822 c Connection closed to client
2012/08/15 19:04:07 8822 c thread 8822 ended!
2012/08/15 19:04:07 8C23 c client connected to 50001 port
2012/08/15 19:04:07 8C23 c Connection closed to client
2012/08/15 19:04:07 8C23 c thread 8C23 ended!
2012/08/15 19:04:07 9024 c client connected to 50002 port
2012/08/15 19:04:07 9024 c Connection closed to client
2012/08/15 19:04:07 9024 c thread 9024 ended!
2012/08/15 19:04:07 9425 c client connected to 50003 port
2012/08/15 19:04:07 9425 c Connection closed to client
2012/08/15 19:04:07 9425 c thread 9425 ended!
2012/08/15 19:04:07 9826 c client connected to 50004 port
2012/08/15 19:04:07 9C27 c client connected to 34000 port
2012/08/15 19:04:07 A028 c client connected to 50001 port
2012/08/15 19:04:07 A429 c client connected to 50002 port
2012/08/15 19:04:07 A82A c client connected to 50003 port
2012/08/15 19:04:08 A82A c encrypted newcamd:50003-client 127.0.0.1 granted (test7, au=auto (5 reader))
2012/08/15 19:04:08 A82A c user test7 authenticated successfully (CCcam)
2012/08/15 19:04:08 A82A c AU enabled for user test7 on reader hustler
2012/08/15 19:04:08 9826 c Connection closed to client
2012/08/15 19:04:08 9826 c thread 9826 ended!
2012/08/15 19:04:08 AC04 c client connected to 50004 port
2012/08/15 19:04:08 AC04 c encrypted newcamd:50004-client 127.0.0.1 granted (test1, au=auto (5 reader))
2012/08/15 19:04:08 AC04 c user test1 authenticated successfully (CCcam)
2012/08/15 19:04:08 AC04 c AU disabled for user test1
2012/08/15 19:04:08 9C27 c Connection closed to client
2012/08/15 19:04:08 9C27 c thread 9C27 ended!
2012/08/15 19:04:08 B00A c client connected to 34000 port
2012/08/15 19:04:08 B00A c encrypted newcamd:34000-client 127.0.0.1 granted (user, au=on (1 reader))
2012/08/15 19:04:08 B00A c user user authenticated successfully (CCcam)
2012/08/15 19:04:08 B00A c AU enabled for user user on reader hd+
2012/08/15 19:04:08 A028 c Connection closed to client
2012/08/15 19:04:08 A028 c thread A028 ended!
2012/08/15 19:04:08 A429 c Connection closed to client
2012/08/15 19:04:08 A429 c thread A429 ended!
2012/08/15 19:04:10 B00A c housekeeping lb stats thread started
2012/08/15 19:04:10 B00A c user (1830&000000/EF75/92:D5D9): found (779 ms) by hd+ (of 1 avail 1)
2012/08/15 19:04:11 B00A c user (1830&000000/EF75/92:597E): found (606 ms) by hd+ (of 1 avail 1)
2012/08/15 19:04:12 B80B c client connected to 50001 port
2012/08/15 19:04:12 B80B c encrypted newcamd:50001-client 127.0.0.1 granted (test3, au=auto (5 reader))
2012/08/15 19:04:12 B80B c user test3 authenticated successfully (CCcam)
2012/08/15 19:04:12 B80B c AU enabled for user test3 on reader redlight
2012/08/15 19:04:16 BC0C c client connected to 50002 port
2012/08/15 19:04:16 BC0C c encrypted newcamd:50002-client 127.0.0.1 granted (test5, au=auto (5 reader))
2012/08/15 19:04:16 BC0C c user test5 authenticated successfully (CCcam)
2012/08/15 19:04:16 BC0C c AU enabled for user test5 on reader private
2012/08/15 19:04:17 B00A c user (1830&000000/EF75/92:8142): found (372 ms) by hd+ (of 1 avail 1)
2012/08/15 19:04:24 B00A c user (1830&000000/EF75/92:58BF): found (374 ms) by hd+ (of 1 avail 1)
[...]
2012/08/15 19:22:20 B00A c user (1830&000000/EF75/92:CE5F): found (378 ms) by hd+ (of 1 avail 1)
2012/08/15 19:22:27 B00A c user (1830&000000/EF75/92:E20C): found (372 ms) by hd+ (of 1 avail 1)
2012/08/15 19:22:34 B00A c user (1830&000000/EF75/92:0F06): found (376 ms) by hd+ (of 1 avail 1)
2012/08/15 19:22:41 B00A c user (1830&000000/EF75/92:75AA): found (377 ms) by hd+ (of 1 avail 1)
2012/08/15 19:22:48 B00A c user (1830&000000/EF75/92:1557): found (378 ms) by hd+ (of 1 avail 1)
2012/08/15 19:22:55 B00A c user (1830&000000/EF75/92:E3B0): found (376 ms) by hd+ (of 1 avail 1)
2012/08/15 19:23:00 AC04 c test1 (0500&050F00/07FA/33:B631): not found (4 ms) by hustler (of 1 avail 1) (provider(050f00) or key(8) n




15.08.2012 19:23 – up 25 min – optim

Vielen Dank!
Grüße
VF
 
AW: Problem mit neuer XXX Astra Karte

Als Laie fällt mir zumindest ein Fehler im Protokoll auf (einmal abgesehen davon, dass es vielleicht noch ganz viele gibt).
An der folgenden Stelle wird die Penthouse Karte irgendwie übersprungen bzw. fehlt. Dadurch bekommt die Hustler Karte newcamd:50003 und einen anderen User nämlich test7, der eigentlich für die Private Karte vorgesehen ist - laut Config müsste die Astra Hustler Karte newcamd:5004 und den user test1 bekommen. Wie kann das denn passieren? Und das Ergebnis habe ich auch gleich. Mit dieser Konfiguration ist nur noch eine (!) Karte hell, nämlich die Redlight. Penthouse, Spice und Hustler sind dunkel. Upssss ... Ich glaube, da gibt es einigen Handlungsbedarf in der Konfiguration.

2012/08/15 20:21:38 A028 c encrypted newcamd:50001-client 127.0.0.1 granted (test3, au=auto (5 reader))
2012/08/15 20:21:38 A028 c user test3 authenticated successfully (CCcam)
2012/08/15 20:21:38 A028 c AU enabled for user test3 on reader redlight
2012/08/15 20:21:38 A429 c Connection closed to client
2012/08/15 20:21:38 A429 c thread A429 ended!
2012/08/15 20:21:38 B004 c client connected to 50002 port
2012/08/15 20:21:38 B004 c encrypted newcamd:50002-client 127.0.0.1 granted (test5, au=auto (5 reader))
2012/08/15 20:21:38 B004 c user test5 authenticated successfully (CCcam)
2012/08/15 20:21:38 B004 c AU enabled for user test5 on reader private
2012/08/15 20:21:38 A82A c Connection closed to client
2012/08/15 20:21:38 A82A c thread A82A ended!
2012/08/15 20:21:38 B40A c client connected to 50003 port
2012/08/15 20:21:38 B40A c encrypted newcamd:50003-client 127.0.0.1 granted (test7, au=auto (5 reader))
2012/08/15 20:21:38 B40A c user test7 authenticated successfully (CCcam)
2012/08/15 20:21:38 B40A c AU enabled for user test7 on reader hustler
2012/08/15 20:21:38 AC2B c Connection closed to client
 
AW: Problem mit neuer XXX Astra Karte

So, um das Chaos perfekt zu machen. Jetzt habe ich die Hustler auskommentiert und alle anderen CAID 500 Karten gehen wieder (oben ja nur Redlight). Hier das Protokoll:

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Aug 15 23:02:26 2012
-------------------------------------------------------------------------------
2012/08/15 23:02:26 400 s >> OSCam << cardserver started, version 1.00 -DEB-Freetz--Prof.Linux- , build #5236 (mipsel-router-linux-uclibc929)
2012/08/15 23:02:26 400 s version=1.00 -DEB-Freetz--Prof.Linux- , build #5236, system=mipsel-router-linux, nice=-1
2012/08/15 23:02:26 400 s client max. idle=120 sec, debug level=0
2012/08/15 23:02:26 400 s max. logsize=500 Kb, loghistorysize=4096 bytes
2012/08/15 23:02:26 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/08/15 23:02:26 400 s services reloaded: 0 services freed, 3 services loaded
2012/08/15 23:02:26 400 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2012/08/15 23:02:26 400 s signal handling initialized (type=sysv)
2012/08/15 23:02:26 400 s 323 service-id's loaded in 23ms
2012/08/15 23:02:26 400 s 116 tier-id's loaded
2012/08/15 23:02:26 400 s 3 provid's loaded
2012/08/15 23:02:26 400 s 22 lengths for caid guessing loaded
2012/08/15 23:02:26 400 s monitor: initialized (fd=8, port=988)
2012/08/15 23:02:26 400 s camd33: disabled
2012/08/15 23:02:26 400 s camd35: disabled
2012/08/15 23:02:26 400 s cs378x: disabled
2012/08/15 23:02:26 400 s newcamd: initialized (fd=9, port=34000, crypted)
2012/08/15 23:02:26 400 s CAID: 1830
2012/08/15 23:02:26 400 s provid #0: 000000
2012/08/15 23:02:26 400 s provid #1: 003411
2012/08/15 23:02:26 400 s provid #2: 008011
2012/08/15 23:02:26 400 s newcamd: initialized (fd=10, port=34002, crypted)
2012/08/15 23:02:26 400 s CAID: 1702
2012/08/15 23:02:26 400 s provid #0: 000000
2012/08/15 23:02:26 400 s newcamd: initialized (fd=11, port=50001, crypted)
2012/08/15 23:02:26 400 s CAID: 0500
2012/08/15 23:02:26 400 s provid #0: 043800
2012/08/15 23:02:26 400 s newcamd: initialized (fd=12, port=50002, crypted)
2012/08/15 23:02:26 400 s CAID: 0500
2012/08/15 23:02:26 400 s provid #0: 042740
2012/08/15 23:02:26 400 s newcamd: initialized (fd=13, port=50003, crypted)
2012/08/15 23:02:26 400 s CAID: 0500
2012/08/15 23:02:26 400 s provid #0: 041700
2012/08/15 23:02:26 400 s cccam: Bind request failed, waiting another 119 seconds
[...]
2012/08/15 23:04:25 400 s cccam: Bind request failed, waiting another 1 seconds
2012/08/15 23:04:26 400 s cccam: Bind request failed, giving up
2012/08/15 23:04:26 400 s radegast: disabled
2012/08/15 23:04:26 400 s http thread started
2012/08/15 23:04:26 400 s creating thread for device /dev/ttyUSB1
2012/08/15 23:04:26 400 s creating thread for device /dev/ttyUSB2
2012/08/15 23:04:26 400 s creating thread for device /dev/ttyUSB3
2012/08/15 23:04:26 400 s creating thread for device /dev/ttyUSB4
2012/08/15 23:04:26 400 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/08/15 23:04:26 400 s waiting for local card init
2012/08/15 23:04:26 C04 h HTTP Server couldn't bind on port 8888 (errno=125 Address already in use). Not starting HTTP!
2012/08/15 23:04:26 1005 r reader thread started (thread= 1005, label=hd+, device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2012/08/15 23:04:26 1406 r reader thread started (thread= 1406, label=redlight, device=/dev/ttyUSB2, detect=cd, mhz=357, cardmhz=357)
2012/08/15 23:04:26 1807 r reader thread started (thread= 1807, label=penthouse, device=/dev/ttyUSB3, detect=cd, mhz=357, cardmhz=357)
2012/08/15 23:04:26 1C08 r reader thread started (thread= 1C08, label=private, device=/dev/ttyUSB4, detect=cd, mhz=357, cardmhz=357)
2012/08/15 23:04:29 1C08 r private card detected
2012/08/15 23:04:29 1807 r penthouse card detected
2012/08/15 23:04:29 1406 r redlight card detected
2012/08/15 23:04:29 1005 r hd+ card detected
2012/08/15 23:04:33 1807 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 23:04:33 1C08 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 23:04:33 1406 r ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2012/08/15 23:04:34 1005 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/08/15 23:04:36 1C08 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 23:04:36 1406 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 23:04:36 1807 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 23:04:36 1005 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 23:04:37 1005 r detect native nagra card
2012/08/15 23:04:38 1005 r -----------------------------------------
2012/08/15 23:04:38 1005 r |id |tier |valid from |valid to |
2012/08/15 23:04:38 1005 r +----+--------+------------+------------+
2012/08/15 23:04:38 1005 r |8011|0064 |2010/11/20 |2011/11/21 |
2012/08/15 23:04:38 1005 r |8011|0065 |1992/01/01 |1993/01/01 |
2012/08/15 23:04:38 1005 r |8011|0BEA |2011/11/09 |2012/12/14 |
2012/08/15 23:04:38 1005 r -----------------------------------------
2012/08/15 23:04:39 1C08 r card system not supported
2012/08/15 23:04:39 1C08 r Normal mode failed, reverting to Deprecated Mode
2012/08/15 23:04:39 1406 r card system not supported
2012/08/15 23:04:39 1406 r Normal mode failed, reverting to Deprecated Mode
2012/08/15 23:04:39 1807 r card system not supported
2012/08/15 23:04:39 1807 r Normal mode failed, reverting to Deprecated Mode
2012/08/15 23:04:39 1005 r WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2012/08/15 23:04:39 1005 r found cardsystem nagra
2012/08/15 23:04:39 1005 r ROM: D N A S P 1 4 2
2012/08/15 23:04:39 1005 r REV: R e v G C 6
2012/08/15 23:04:39 1005 r SER: 48 EA E6 0C
2012/08/15 23:04:39 1005 r CAID: 1830
2012/08/15 23:04:39 1005 r Prv.ID: 00 00 34 11 (sysid)
2012/08/15 23:04:39 1005 r Prv.ID: 00 00 00 00
2012/08/15 23:04:39 1005 r Prv.ID: 00 00 80 11
2012/08/15 23:04:39 1005 r [nagra-reader] ready for requests
2012/08/15 23:04:43 1C08 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 23:04:43 1C08 r Warning: D=0 is invalid, forcing D=1
2012/08/15 23:04:43 1807 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 23:04:43 1807 r Warning: D=0 is invalid, forcing D=1
2012/08/15 23:04:43 1406 r ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2012/08/15 23:04:43 1406 r Warning: D=0 is invalid, forcing D=1
2012/08/15 23:04:44 1C08 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 23:04:44 1807 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 23:04:44 1406 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 23:04:46 1C08 r [viaccess-reader] using ecm #608 for long viaccess ecm
2012/08/15 23:04:46 1807 r [viaccess-reader] using ecm #61f for long viaccess ecm
2012/08/15 23:04:46 1406 r [viaccess-reader] using ecm #60d for long viaccess ecm
2012/08/15 23:04:46 1C08 r type: Viaccess (standard atr), caid: 0500, serial: 1010101010
2012/08/15 23:04:46 1807 r type: Viaccess (standard atr), caid: 0500, serial: 1212121212
2012/08/15 23:04:46 1406 r type: Viaccess (standard atr), caid: 0500, serial: 1313131313
2012/08/15 23:04:46 1807 r providers: 2 (FFFD00,042740)
2012/08/15 23:04:46 1807 r [viaccess-reader] Using PIN 0000!
2012/08/15 23:04:46 1807 r [viaccess-reader] Parental lock disabled
2012/08/15 23:04:46 1807 r [viaccess-reader] ready for requests
2012/08/15 23:04:46 1807 r found cardsystem viaccess
2012/08/15 23:04:46 1807 r [viaccess-reader] card detected
2012/08/15 23:04:46 1406 r providers: 2 (FFF8F0,043800)
2012/08/15 23:04:46 1406 r [viaccess-reader] Using PIN 0000!
2012/08/15 23:04:47 1406 r [viaccess-reader] Parental lock disabled
2012/08/15 23:04:47 1406 r [viaccess-reader] ready for requests
2012/08/15 23:04:47 1406 r found cardsystem viaccess
2012/08/15 23:04:47 1406 r [viaccess-reader] card detected
2012/08/15 23:04:47 1C08 r providers: 3 (FFF830,041700,041710)
2012/08/15 23:04:47 1C08 r [viaccess-reader] Using PIN 0000!
2012/08/15 23:04:47 1807 r [viaccess-reader] serial: 1212121212
2012/08/15 23:04:47 1C08 r [viaccess-reader] Parental lock disabled
2012/08/15 23:04:47 1C08 r [viaccess-reader] ready for requests
2012/08/15 23:04:47 1C08 r found cardsystem viaccess
2012/08/15 23:04:47 1C08 r [viaccess-reader] card detected
2012/08/15 23:04:47 1406 r [viaccess-reader] serial: 1313131313
2012/08/15 23:04:47 1C08 r [viaccess-reader] serial: 1010101010
2012/08/15 23:04:47 1807 r provider: 1, id: FFFD00, name: ISSUER, sa: BFBA7C9F, geo: empty
2012/08/15 23:04:47 1406 r provider: 1, id: FFF8F0, name: Redlight, sa: BE4E627D, geo: empty
2012/08/15 23:04:47 1C08 r provider: 1, id: FFF830, name: ISSUER, sa: BF3E96E8, geo: empty
2012/08/15 23:04:48 1807 r provider: 2, id: 042740, name: PENTHOUSE HDTV, sa: BFBA7C9F, geo: FF FF FF FF
2012/08/15 23:04:48 1406 r provider: 2, id: 043800, name: Redlight, sa: BE4E627D, geo: FF FF FF FF
2012/08/15 23:04:48 1807 r class: 0A, expiry date: 2012/04/26 - 2013/05/31
2012/08/15 23:04:48 1807 r class: 0B, expiry date: 2012/04/26 - 2013/05/31
2012/08/15 23:04:48 1807 r class: 0C, expiry date: 2012/04/26 - 2013/05/31
2012/08/15 23:04:48 1C08 r provider: 2, id: 041700, sa: BF3E96E8, geo: FF FF FF FF
2012/08/15 23:04:48 1406 r class: 01, expiry date: 2012/05/23 - 2012/11/18
2012/08/15 23:04:48 1C08 r class: F6, expiry date: 2012/08/05 - 2013/08/04
2012/08/15 23:04:49 1C08 r provider: 3, id: 041710, sa: BF3E96E8, geo: FF FF FF FF
2012/08/15 23:04:49 400 s init for all local cards done
2012/08/15 23:04:50 2004 c client connected to 34000 port
2012/08/15 23:04:50 2004 c Connection closed to client
2012/08/15 23:04:50 2004 c thread 2004 ended!
2012/08/15 23:04:50 2409 c client connected to 50001 port
2012/08/15 23:04:50 2409 c Connection closed to client
2012/08/15 23:04:50 2409 c thread 2409 ended!
2012/08/15 23:04:50 280A c client connected to 50002 port
2012/08/15 23:04:50 280A c Connection closed to client
2012/08/15 23:04:50 280A c thread 280A ended!
2012/08/15 23:04:50 2C0B c client connected to 50003 port
2012/08/15 23:04:50 300C c client connected to 34000 port
2012/08/15 23:04:50 300C c Connection closed to client
2012/08/15 23:04:50 340D c client connected to 50001 port
2012/08/15 23:04:50 340D c Connection closed to client
2012/08/15 23:04:50 340D c thread 340D ended!
2012/08/15 23:04:50 380E c client connected to 50002 port
2012/08/15 23:04:50 380E c Connection closed to client
2012/08/15 23:04:50 380E c thread 380E ended!
2012/08/15 23:04:50 300C c thread 300C ended!
2012/08/15 23:04:50 3C0F c client connected to 50003 port
2012/08/15 23:04:50 3C0F c Connection closed to client
2012/08/15 23:04:50 3C0F c thread 3C0F ended!
2012/08/15 23:04:50 4812 c client connected to 50002 port
2012/08/15 23:04:50 4812 c Connection closed to client
2012/08/15 23:04:50 4C13 c client connected to 50003 port
2012/08/15 23:04:50 4C13 c Connection closed to client
2012/08/15 23:04:50 4C13 c thread 4C13 ended!
2012/08/15 23:04:50 5415 c client connected to 50001 port
2012/08/15 23:04:50 5415 c Connection closed to client
2012/08/15 23:04:50 5415 c thread 5415 ended!
2012/08/15 23:04:50 4010 c client connected to 34000 port
2012/08/15 23:04:50 4812 c thread 4812 ended!
2012/08/15 23:04:50 4411 c client connected to 50001 port
2012/08/15 23:04:50 4411 c Connection closed to client
2012/08/15 23:04:50 4411 c thread 4411 ended!
2012/08/15 23:04:50 5014 c client connected to 34000 port
2012/08/15 23:04:50 5014 c Connection closed to client
2012/08/15 23:04:50 5014 c thread 5014 ended!
2012/08/15 23:04:50 4010 c Connection closed to client
2012/08/15 23:04:50 4010 c thread 4010 ended!
2012/08/15 23:04:50 6419 c client connected to 50001 port
2012/08/15 23:04:50 6419 c Connection closed to client
2012/08/15 23:04:50 6018 c client connected to 34000 port
2012/08/15 23:04:50 6419 c thread 6419 ended!
2012/08/15 23:04:50 6018 c Connection closed to client
2012/08/15 23:04:50 6018 c thread 6018 ended!
2012/08/15 23:04:50 5816 c client connected to 50002 port
2012/08/15 23:04:50 5816 c Connection closed to client
2012/08/15 23:04:50 5816 c thread 5816 ended!
2012/08/15 23:04:50 5C17 c client connected to 50003 port
2012/08/15 23:04:50 5C17 c Connection closed to client
2012/08/15 23:04:50 5C17 c thread 5C17 ended!
2012/08/15 23:04:50 2C0B c Connection closed to client
2012/08/15 23:04:50 2C0B c thread 2C0B ended!
2012/08/15 23:04:50 681A c client connected to 50002 port
2012/08/15 23:04:50 681A c Connection closed to client
2012/08/15 23:04:50 681A c thread 681A ended!
2012/08/15 23:04:50 6C1B c client connected to 50003 port
2012/08/15 23:04:50 6C1B c Connection closed to client
2012/08/15 23:04:50 6C1B c thread 6C1B ended!
2012/08/15 23:04:50 701C c client connected to 34000 port
2012/08/15 23:04:50 701C c Connection closed to client
2012/08/15 23:04:50 701C c thread 701C ended!
2012/08/15 23:04:50 741D c client connected to 50001 port
2012/08/15 23:04:50 741D c Connection closed to client
2012/08/15 23:04:50 741D c thread 741D ended!
2012/08/15 23:04:50 781E c client connected to 50002 port
2012/08/15 23:04:50 781E c Connection closed to client
2012/08/15 23:04:50 781E c thread 781E ended!
2012/08/15 23:04:50 7C1F c client connected to 50003 port
2012/08/15 23:04:50 7C1F c Connection closed to client
2012/08/15 23:04:50 7C1F c thread 7C1F ended!
2012/08/15 23:04:50 8020 c client connected to 34000 port
2012/08/15 23:04:50 8020 c Connection closed to client
2012/08/15 23:04:50 8020 c thread 8020 ended!
2012/08/15 23:04:50 8421 c client connected to 50001 port
2012/08/15 23:04:50 8421 c Connection closed to client
2012/08/15 23:04:50 8421 c thread 8421 ended!
2012/08/15 23:04:50 8822 c client connected to 50002 port
2012/08/15 23:04:50 8822 c Connection closed to client
2012/08/15 23:04:50 8822 c thread 8822 ended!
2012/08/15 23:04:50 8C23 c client connected to 50003 port
2012/08/15 23:04:50 9024 c client connected to 34000 port
2012/08/15 23:04:50 9024 c Connection closed to client
2012/08/15 23:04:50 9024 c thread 9024 ended!
2012/08/15 23:04:50 8C23 c Connection closed to client
2012/08/15 23:04:50 8C23 c thread 8C23 ended!
2012/08/15 23:04:50 9425 c client connected to 50001 port
2012/08/15 23:04:50 9425 c Connection closed to client
2012/08/15 23:04:50 9425 c thread 9425 ended!
2012/08/15 23:04:50 9826 c client connected to 50002 port
2012/08/15 23:04:50 9C27 c client connected to 50003 port
2012/08/15 23:04:50 A028 c client connected to 34000 port
2012/08/15 23:04:50 A429 c client connected to 50001 port
2012/08/15 23:04:50 A429 c encrypted newcamd:50001-client 127.0.0.1 granted (test3, au=auto (4 reader))
2012/08/15 23:04:50 A429 c user test3 authenticated successfully (CCcam)
2012/08/15 23:04:50 A429 c AU enabled for user test3 on reader redlight
2012/08/15 23:04:50 9826 c Connection closed to client
2012/08/15 23:04:50 9826 c thread 9826 ended!
2012/08/15 23:04:50 A804 c client connected to 50002 port
2012/08/15 23:04:50 A804 c encrypted newcamd:50002-client 127.0.0.1 granted (test5, au=auto (4 reader))
2012/08/15 23:04:50 A804 c user test5 authenticated successfully (CCcam)
2012/08/15 23:04:50 A804 c AU enabled for user test5 on reader penthouse
2012/08/15 23:04:50 9C27 c Connection closed to client
2012/08/15 23:04:50 9C27 c thread 9C27 ended!
2012/08/15 23:04:50 A028 c Connection closed to client
2012/08/15 23:04:50 A028 c thread A028 ended!
2012/08/15 23:04:52 AC09 c client connected to 50003 port
2012/08/15 23:04:52 AC09 c encrypted newcamd:50003-client 127.0.0.1 granted (test7, au=auto (4 reader))
2012/08/15 23:04:52 AC09 c user test7 authenticated successfully (CCcam)
2012/08/15 23:04:52 AC09 c AU enabled for user test7 on reader private
2012/08/15 23:04:58 B00A c client connected to 34000 port
2012/08/15 23:04:58 B00A c encrypted newcamd:34000-client 127.0.0.1 granted (user, au=on (1 reader))
2012/08/15 23:04:58 B00A c user user authenticated successfully (CCcam)
2012/08/15 23:04:58 B00A c AU enabled for user user on reader hd+
2012/08/15 23:05:32 B00A c housekeeping lb stats thread started
2012/08/15 23:05:32 B00A c user (1830&000000/1519/92:96D5): found (358 ms) by hd+ (of 1 avail 1)
2012/08/15 23:05:39 B00A c user (1830&000000/1519/92:82F0): found (369 ms) by hd+ (of 1 avail 1)
2012/08/15 23:05:46 B00A c user (1830&000000/1519/92:F23A): found (358 ms) by hd+ (of 1 avail 1)
2012/08/15 23:06:15 B00A c user (1830&000000/EF11/92:BAA6): found (374 ms) by hd+ (of 1 avail 1)
2012/08/15 23:06:26 A429 c test3 (0500&043800/4224/35:168E): found (411 ms) by redlight (of 1 avail 1)
2012/08/15 23:06:32 A804 c test5 (0500&042740/000A/2A:F9E2): found (389 ms) by penthouse (of 1 avail 1)
2012/08/15 23:06:38 AC09 c test7 (0500&041700/1251/2A:2BA9): found (371 ms) by private (of 1 avail 1)
2012/08/15 23:06:43 AC09 c test7 (0500&041700/1251/2A:2BA8): found (320 ms) by private (of 1 avail 1)

Auch wenn es ein gordischer Knoten ist, vielleicht kann jemand helfen.
Grüße
VF
 
AW: Problem mit neuer XXX Astra Karte

Die Reader stehen alle auf 3.57 - so verstehe ich auch die Empfehlung.
 
AW: Problem mit neuer XXX Astra Karte

Wo hast du die Empfehlung her? Versuch's doch mal, es kann ja nicht schlimmer werden. Ein zurück geht (fast) immer.

Gruß bombadil
 
AW: Problem mit neuer XXX Astra Karte

Danke, aber vielleicht ist das hier mittlerweile unübersichtlich. Das LOG im Post #18

https://www.digital-eliteboard.com/...-Karte/page2&p=1538709&viewfull=1#post1538709

funktioniert einwandfrei. Alles Karten (S02 und HD01 sowie 3 Viaccess Karten) werden hell.
Erst wenn ich ich in die Config noch die XXX Astra (also die neue Hustler) einhänge, streikt Freetz.
Alle mir bekannten funktionierenden Konfigurationen laufen mit 3.579MHz.

Danke trotzdem.
Grüße
VF
 
AW: Problem mit neuer XXX Astra Karte

Aktiver HUB - verschiedene Modelle bereits getestet. König usw ... Wie bereits mehrfach beschrieben. Von 4 Viaccess Karten kann ich 3 einhängen, Reihenfolge egal usw. Alles hell, keine Probleme. Allein die neue XXX Astra streikt, wird aber im Receiver Schacht hell.
 
AW: Problem mit neuer XXX Astra Karte

Also so ganz schlau werde ich aus dem Log leider auch nicht.
Aber etwas stutzig macht mich das hier
2012/08/15 19:03:50 1807 r ATR: 3F 77 18 00 00 C2 EB 41 02 6C 90 00
2012/08/15 19:03:50 1C08 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 19:03:50 2009 r ATR: 3F 77 18 00 00 C2 7A 42 02 68 90 00
2012/08/15 19:03:50 1406 r ATR: 3F 77 18 00 00 C2 7A 44 02 68 90 00
2012/08/15 19:03:51 1005 r ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2012/08/15 19:03:52 1C08 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:52 1807 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:52 2009 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:52 1406 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:53 1005 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/08/15 19:03:53 1807 r card system not supported
Zum Vergrößern anklicken....
Und wird die hustler Karte im Oscam Webinterface unter Readers (also direkt an der Fritz Box) als cardok gemeldet??
Ich habe hier nur oscam only laufen alles über das integrierte CCCam Protokoll und keine umwege über newcamd zu CCCam und einzelne Ports....
Bei sovielen Readern die alle nur mit "/dev/ttyUSB*" angesprochen werden wundert mich es eh das da nicht mal was durcheinander kommt. Was aber anscheinend doch ab und zu mal passiert.
Leider funktioniert das mit den udev Regeln nicht auf einer 7170....
Bei sovielen Readern sollte man evtl. überlegen auf eine z.B. 3270 zu gehen und dort die easymäuse fest verlinken kann.
An der Karte selber liegt es ja nicht wenn sie im Receiver läuft....
Interessant wäre evtl. noch ein Log wenn nur die XXX-Karte als einziger "/dev/ttyUSB0" Cardreader dran ist.
 
AW: Problem mit neuer XXX Astra Karte

Alles klar! Ich denke auch, dass das System so langsam an seine Grenzen kommt. Ich habe mir jetzt nochmal einen neuen SMARGO und eine EASYMOUSE geordert - Versuch macht kluch. Und ein Einzelprotokoll werde ich auch noch posten. Ansonsten fliegt das in die Bucht (oder in den nächsten Graben) und fertig. Wegen der XXX Astra Karte kommt keine neue Box auf den Hof. Das wäre wirklich zuviel des Guten. Zumal der Bestand an Viaccess Karten definitiv hinreichend ist und die wirklich guten Karten (also in HD Qualität) ja auch funktionieren. Wie gesagt, wenn es nicht geht, dann bleibt diese komische Astra XXX- Karte halt im Receiver und wird dort ihren Lebensabend beschließen.
Melde mich, wenn ich ein Einzelprotokoll habe bzw. die Reader nochmal ersetzt.
Danke bis hierhin.
Grüße
VF
 
AW: Problem mit neuer XXX Astra Karte

Was mir noch aufgefallen ist, du fängst im Server mit /dev/ttyUSB1 an. Derr erste USB Port wird mit /dev/ttyUSB0 angesprochen. Vielleicht hilft ja auch eine Änderung dahin.

2012/08/15 23:04:26 400 s http thread started
2012/08/15 23:04:26 400 s creating thread for device /dev/ttyUSB1
2012/08/15 23:04:26 400 s creating thread for device /dev/ttyUSB2
2012/08/15 23:04:26 400 s creating thread for device /dev/ttyUSB3
2012/08/15 23:04:26 400 s creating thread for device /dev/ttyUSB4

@Skyrider79
Die Anzahl sollte nicht das Problem sein, hab auch 4 x Easymouse und einen Smargo ohne Probs
 
AW: Problem mit neuer XXX Astra Karte

Mit dem ersten Port /dev/ttyUSB0 wird bereits in der CCcam.cfg die S02 (über einen SMARGO) ausgelesen. Nehme mal an, dass das deswegen nicht im OSCAM Protokoll auftaucht. Über die N-Linien kommt dann die Verbindung mit den anderen vier Karten zustanden.

Nun ja, 4x Easymouse und ein SMARGO funktioniert ja auch bei mir. 1x die S02 (SMARGO), 1x die HD01 (Easymouse) und 3x eine Viaccess (auch 3x Easymouse). Nur die vierte (also insgesamt dann Karte Nr. 6 macht Zicken). Aber wir werden sehen. Wie gesagt, ich teste nochmal mit neuen Readern und mit der Karte allein.
 

Ähnliche Themen

O
gelöst Gelöst: Bekomme die neue ORF Karte K25xx nicht zum Laufen
2
Antworten
26
Aufrufe
2K
Kind regards
Kind regards
J
gelöst Hilfe, neue Orf Karte einrichten
6 7 8
Antworten
110
Aufrufe
13K
Kind regards
Kind regards
T
gelöst ERROR: Opening device /dev/Astra_XXX (errno=2 No such file or directory) (reader) Astra_XXX [mouse] Cannot open devic
Antworten
14
Aufrufe
3K
Toppo
T
K
Neue Redlight Mega Elite Royale 20 aktiviert - Blue Hustler bleibt dunkel
Antworten
1
Aufrufe
2K
kugelfisch71
K
hgxxl
gelöst Brauche eure Hilfe, OScam auf Synology mit Easymouse2
Antworten
9
Aufrufe
2K
hgxxl
hgxxl
Zurück
Oben