Problem mit HD Sendern bei S*Y und DIABLO WIFI 2.6 mit UW 2.30

[schtallone]

Hallo zusammen,

bin neu hier und habe mich bereits ein wenig eingelesen in das Thema DIABLO WIFI und S*Y CS.

Mein Problem ist, dass ich die 1. N-Line zum laufen bekommen und die SD-Sender werden hell. Sobald ich die 2. N-Line hinzufüge (mit anschließendem Enter, also eine leere Zeile darunter), bekomme ich bei beiden N-Lines ein disconnect!

Ich habe folgendes System am laufen:

DIALBO WIFI Rev. 2.6 mit UNDERWORLD 2.30
CS-SERVER über Internet mit DOSCAM drauf

Mein DIABLO ist so konfiguriert:

Spoiler

WIFI-Einstellungen:
Device Configuration > Wifi Device > ON
Device Configuration > Tx Power dBm > 10Device Configuration > Domain > ETSI
Device Configuration > Encryption > WPA-PSK + WPA2-PSK
Access Point > mein AP
IP Settings > DHCP > OFF, feste IP

CAS:

Conax > OFF
Seca > OFF
Irdeto > OFF
Viaccess > OFF
Cryptoworks > OFF
Dreamcrypt > OFF
Nagravison > ON
DGCrypt > OFF

Configuration:

Language > ENGLISH
Caids File > GERMAN
Auto PMT > OFF
Emulators > ON
SmartCards EMMs > OFF
Add On > Sharing Client > NEWCAMD
Add On > Log > On
Emulators Prio > 1:Emu 2:Card
Fixed CW > OFF
Smart Card Mess > Show never
DeLayer > 0
Leds > ON

Meine NEWCAMD Config sieht so aus:

Spoiler

N: server 29348 user1 passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: server 29349 user2 passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14[enter]
[Leerzeile]

Die DOSCAM Config sieht so aus:

Spoiler

[global]
nice = -1
PreferLocalCards = 1
saveinithistory = 1
waitforcards = 1
logfile = /tmp/doscam.log;stdout
maxlogsize = 256
#sleep =
#bindwait = 120
#clientmaxidle = 120
[webif]
httpport = 3001
httpuser = root
httppwd = coolstream
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
httphideidleclients = 1
httpreadonly = 0
[dvbapi]
enabled = 1
Boxtype = coolstream
au = 1
user = local
[monitor]
port = 1002
nocrypt = 127.0.0.1,192.168.0.1-192.168.254.254
aulow = 5
hideclient_to = 15
monlevel = 0
appendchaninfo = 1
#[reader]
#Label = Reader_unten
#Enable = 1
#Protocol = internal
#Device = 0 #S02
#Detect = CD
#MHz = 368
#CardMHz = 368
#CAID = 1702,1833,1830,1843
#EMMCache = 1,3,255
#Fallback = 0
#Group = 1
[reader]
label = keyfile
protocol = constcw
device = /var/keys/SoftCam.Key
caid = 0100,0500,0600,1800,090F,093E,0D00,2600,4A00,FF00, 0D05,0D95
group = 1
caid = 1801,0D05,0500,0100,0604
ident = 1801:001101
P: 0D05 #ORF
P: 1801 #Kabel Digital Free
P: 0500:030B00 #TNTSat
[reader]
label = skyS02
enable = 1
protocol = internal
device = 0
#device = /dev/sci0
caid = 1702,1833,1830,1843
detect = cd
ecmwhitelist = 1702:93;1833:89
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,255
[newcamd]
#port = 29348
port = 29348@1702:000000;29349@1833:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0
#[cccam]
#port = 29347
#version = 2.1.1
#recv_timeout = 4000
#keepconnected = 1
#Stealth = 0
#updateinterval = 240
[account]
user = cool
pwd = cool
disabled = 0
expdate =
group = 1
hostname =
uniq = 2
sleep = 0
monlevel = 4
au = 1
services =
caid = 1702,1833,1830,1843
betatunnel =
ident =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

[account]
user = user1
pwd = passwort
disabled = 0
expdate =
group = 1
hostname =
uniq = 2
sleep = 0
monlevel = 4
au = 1
services =
caid = 1702
betatunnel = 1833.FFFF:1702
#betatunnel = 1833.0069:1702,1833.006A:1702,1833.006B:1702,1833. 006C:1702,1833.006F:1702,1833.0070:1702,1833.0071: 1702,1833.0072:1702,1833.0075:1702,1833.0076:1702, 1833.0077:1702,1833.007C:1702,1833.0081:1702,1833. 0082:1702,1833.0083:1702,1833.0084:1702,1702.0009: 0069,1702:006A,1702:006B,1702:006C,1702:006F,1702: 0070,1702:0071,1702:0072,1702:0075,1702:0076,1702: 0077,1702:007C,1702:0081,1702:0082,1702:0083,1702: 0084,0069:0009,006A,006B,006C,006F,0070,0071,0072, 0075,0076,0077,007C,0081,0082,0083,0084,0009
ident =
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0
[account]
user = user2
pwd = passwort
#disabled = 0
#expdate =
group = 1
#hostname =
uniq = 0
sleep =
monlevel = 4
au = 1
#services =
caid = 1833
#betatunnel = 1833.FFFF:1702
#betatunnel = 1833.0069:1702,1833.006A:1702,1833.006B:1702,1833. 006C:1702,1833.006F:1702,1833.0070:1702,1833.0071: 1702,1833.0072:1702,1833.0075:1702,1833.0076:1702, 1833.0077:1702,1833.007C:1702,1833.0081:1702,1833. 0082:1702,1833.0083:1702,1833.0084:1702,1702.0009: 0069,1702:006A,1702:006B,1702:006C,1702:006F,1702: 0070,1702:0071,1702:0072,1702:0075,1702:0076,1702: 0077,1702:007C,1702:0081,1702:0082,1702:0083,1702: 0084,0069:0009,006A,006B,006C,006F,0070,0071,0072, 0075,0076,0077,007C,0081,0082,0083,0084,0009
ident = 1833:000000
#cccmaxhops = 10
keepalive = 1
#numusers = 0
#penalty = 0

Bei den Usern habe ich 2 verschiedene Ports, 2 verschiedene User aber jeweils das gleiche Passwort! Vielleicht hilft das?!?


Die GERMAN XML sieht so aus:

Spoiler

< caid value="1702"></caid>
< caid value="1722"></caid>
< caid value="1833"></caid>
< caid value="1834"></caid>
< caid value="0963"></caid>
< caid value="09C4"></caid>
< caid value="09C7"></caid>
< caid value="098C"></caid>
< caid value="09AF"></caid>
< caid value="1918"></caid>
< caid value="1830"></caid>
< caid value="1843"></caid>
< caid value="0500"></caid>
< caid value="0B00"></caid>
< caid value="0D00"></caid>
< caid value="0D05"></caid>
< caid value="0D22"></caid>
< caid value="0D95"></caid>
< caid value="0648"></caid>
< caid value="1800"></caid>
< caid value="1801"></caid>

Ich hoffe Ihr könnt mir helfen. Ich bekomme es einfach nicht hin. Ich habe auch schon CCCAM versuch mit folgender CCCAM Config:


c:server 29348 user1 Passwort



Hier bekomme ich gar kein Connect hin (in der DOSCAM Config sind die CCCAM relevanten Codes mit # zurzeit deaktiviert!, also nicht wundern)


Über Eure Hilfe würde ich mich freuen.

DANKE schon mal und Gruß

Schtallone

Nappy08​

Spoiler gesetzt. Hier ist erklärt, wie man Spoiler setzt: Klick