stinkefisch
Hacker
- Registriert
- 29. Juli 2009
- Beiträge
- 407
- Lösungen
- 2
- Reaktionspunkte
- 247
- Punkte
- 123
Hi,
Ich hab ein kleines Tutorial erstellt wie man Powervu mit Enigma2 und DVBVIEWER ohne DVB-S2 Karte streamen kann.
[video]https://vid.me/eLPd[/video]
OK just tested and it also works with DVBVIEWER NO DVB CARD REQUIRED just with streaming
1. DVBVIEWER - setting - options - Hardware
2. Choose your DVB card if you got one and disable it
3. Click add File device Tuner Type is cable State normal (To add the enigma2 receiver stream).
4. Click settings - Add - URL eg
5. Scan channels DVBVIEWER - TV/RADIO - CHANNEL SCAN
TARGET ROOT call it Powervu
TYPE cable
TRANSPONDER LIST none
SYMBOLE RATES 6900 (only)
FREQUENCY starts at 50500 - what ever your last URL was
untick all boxes
Click Scan Range and wait
If complete find the powervu foder in the channel list.
click on the channel and enable POWERVU emu in PLUGINS.
And don't forget to
From openwebif under settings ->Customize, make sure "Include ECM in http streams" is checked. Thanks stpierre flashed OPli
Have fun
stinkefisch
Ich hab ein kleines Tutorial erstellt wie man Powervu mit Enigma2 und DVBVIEWER ohne DVB-S2 Karte streamen kann.
[video]https://vid.me/eLPd[/video]
OK just tested and it also works with DVBVIEWER NO DVB CARD REQUIRED just with streaming
1. DVBVIEWER - setting - options - Hardware
2. Choose your DVB card if you got one and disable it
3. Click add File device Tuner Type is cable State normal (To add the enigma2 receiver stream).
4. Click settings - Add - URL eg
Du musst dich
Anmelden
oder
Registrieren
um diesen link zusehen!
(get powervu channels from OPENWEBIF and start with Frequency 50500 next URL with 520000 and so on Press OK.5. Scan channels DVBVIEWER - TV/RADIO - CHANNEL SCAN
TARGET ROOT call it Powervu
TYPE cable
TRANSPONDER LIST none
SYMBOLE RATES 6900 (only)
FREQUENCY starts at 50500 - what ever your last URL was
untick all boxes
Click Scan Range and wait
If complete find the powervu foder in the channel list.
click on the channel and enable POWERVU emu in PLUGINS.
And don't forget to
From openwebif under settings ->Customize, make sure "Include ECM in http streams" is checked. Thanks stpierre flashed OPli
Have fun
stinkefisch