Pingulux keine Verbindung zum Server

[Gizmo31]

AW: Pingulux keine Verbindung zum Server

Geht leider immer noch nicht!
Hatte die Dateien nicht im ordner aber dort sind sie jetzt.
Das hatte ich im Protokoll stehen
2016/03/30 22:13:30 1A5964B6 c (dvbapi) Demuxer 0 serving srvid EF74 (SAT.1 HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
2016/03/30 22:13:34 1A5964B6 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/03/30 22:13:44 1A5964B6 c (-) -- Skipped 1 duplicated log lines --

 

[Osprey]

AW: Pingulux keine Verbindung zum Server

Du musst deine oscam.server von /usr/keys nach /usr/keys/open_atv_deb kopieren.

 

[Gizmo31]

Das hab ich gemacht und danach einen Neustart nur jetzt kommt nichtmal mehr so ein Text.
Soll ich mal die Configs benutzten die da drin waren nur mein Passwort rein?

Das steht da jetzt!

Spoiler

• 2016/03/30 22:47:37 315D4DDE c (dvbapi) Demuxer 0 serving srvid 007C (FOX HD) on adapter 0000 camask 0001 index 0000 pmtpid 0063
• 2016/03/30 22:47:37 315D4DDE c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2016/03/30 22:47:37 315D4DDE c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0020 length: 10)
• 2016/03/30 22:47:37 315D4DDE c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 03ff length: 3)
• 2016/03/30 22:47:37 315D4DDE c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0403 length: 16)
• 2016/03/30 22:47:37 315D4DDE c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0404 length: 16)
• 2016/03/30 22:47:37 315D4DDE c (dvbapi) Demuxer 0 found 2 ECMpids and 4 STREAMpids in PMT
• 2016/03/30 22:47:37 315D4DDE c (dvbapi) Demuxer 0 serving srvid 007C (FOX HD) on adapter 0000 camask 0001 index 0000 pmtpid 0063

Muss ich in der c-line was eintragen?

Spoiler

[reader]
label = cline
description = erhaltene_c-line_vom_server1
enable = 0
protocol = cccam
device = XXXXXXXXX
user = XXXXXXXXX
password = XXXXXXXXX
group = 2
cccversion = 2.3.0
ccckeepalive = 1

Das rot makierte meine ich, bei den XXX hab ich as eingetragen

 

[Bodo-1]

AW: Pingulux keine Verbindung zum Server

Nein dort musst du nicht zwingend etwas entragen

description= kann leer bleiben

 

[Gizmo31]

AW: Pingulux keine Verbindung zum Server

Nur leider geht immer noch nichts

 

[tulpenknicker]

AW: Pingulux keine Verbindung zum Server

enable sollte aber schon auf 1 stehen enable = 1:emoticon-0144-nod:

 

[Gizmo31]

AW: Pingulux keine Verbindung zum Server

Leider geht es immer noch nicht!

Habe jetzt mal die Configs genommen aus dem Board die mit der Cam dabei waren.
Stelle sie nochmal mit hier rein.

oscam.config

Spoiler

[global]
logfile = stdout;/tmp/oscam.log
nice = -1
maxlogsize = 128
waitforcards = 0
preferlocalcards = 1
dropdups = 1
failbantime = 60
failbancount = 10

[dvbapi]
enabled = 1
au = 1
user = Receiver
boxtype = dreambox

[webif]
httpport = 4115
httphelplang = de
httprefresh = 10
httppollrefresh = 20
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.0.0.0-192.168.255.255,10.0.0.0-10.255.0.255,127.0.0.0-127.0.0.255
httposcamlabel = Oscam-DEB-Version
http_status_log = 1

oscam.server

Spoiler

[reader]
label = cline
description = erhaltene_c-line_vom_server1
enable = 1
protocol = cccam
device = xxxxxx
user = xxxxxx
password = xxxxxxx
group = 2
cccversion = 2.3.0
ccckeepalive = 1


[reader]
label = hd01
description = HD+weiss
enable = 0
protocol = internal
device = /dev/sci1
services = hd01
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = hd02
description = HD+schwarz
enable = 0
protocol = internal
device = /dev/sci1
services = hd02
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = v13oben
description = V13-Sky
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

[reader]
label = v14oben
description = V14-Sky
enable = 0
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

[reader]
label = v13unten
description = V13-Sky
enable = 0
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1

[reader]
label = v14unten
description = V14-Sky
enable = 0
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1


[reader]
label = orfice
description = ORF-Ice
enable = 0
protocol = internal
device = /dev/sci1
services = orfice,kombiaustria
caid = 0648
boxid = 12345678
boxkey = 1122334455667788
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
force_irdeto = 1
detect = cd
mhz = 1
cardmhz = 2700
group = 2
emmcache = 1,1,2

[reader]
label = i12
description = i12-Unitymedia
enable = 0
protocol = internal
device = /dev/sci0
services = sky_i12
caid = 1722,1835
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = um02
description = um02-Unitymedia
enable = 0
protocol = internal
device = /dev/sci1
caid = 1838
boxkey = A7642F57BC96D37C
rsakey = B55E0EB0562805F1788BDA0CD8B856BF696CFF1CBF4ED62B85E643F385B0F8899275DEA669AC77BDA43A20CCB844A3AF5A2BE0622779FAB153D156957DF367FF
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = d02
description = D02-KD
enable = 0
protocol = internal
device = /dev/sci0
caid = 1722,1834
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = d09
description = D09-KD
enable = 0
protocol = internal
device = /dev/sci1
caid = 1834
rsakey = 8A54468867159C1188D13ACE7DF348FA08BDF8BE33F1B2F72F74FBCD184C825519E517E3494A6DD8CF046630456111F952979DECCFF5176D890AE93F4E267711
boxkey = 6660A9AE55A4847B
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2

[reader]
label = g0209
description = G02G09-KD
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
ins7e11 = 15
ndsversion = 2
group = 1
emmcache = 1,1,2

[reader]
label = v23
description = v23 Kabel
enable = 0
protocol = internal
device = /dev/sci0
caid = 098E
boxid = 12345678
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1

oscam.user

Spoiler

[account]
user = Pingulux
pwd = ehsinnlos
group = 1
au = Lucky

Fehlermeldung Log

Spoiler

2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00ff length: 6)
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0103 length: 12)
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0020 length: 10)
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0105 length: 5)
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0030 length: 10)
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 0106 length: 14)
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0107 length: 3)
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in PMT
2016/03/31 11:04:47 4CB34A0B c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
2016/03/31 11:04:51 4CB34A0B c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/03/31 11:05:01 4CB34A0B c (-) -- Skipped 1 duplicated log lines --

 

[dodo83]

AW: Pingulux keine Verbindung zum Server

wie hast du die Device eingetragen?
was kommt beim Reader im WebIF? CONNECTED?

 

[Osprey]

AW: Pingulux keine Verbindung zum Server

Hi, du hast den dvbapi User geändert so wird das nicht hell.
oscam.user ändern auf

[account]
user = Receiver
au = 1
group = 1,2,3

Und schau auf das WebIF ob du verbunden bist mit dem Server.

 

[Gizmo31]

Wie meinst du das mit Device eingetragen.
Finde das nicht Connected sorry

Jetzt habe ich diese meldung

Spoiler

2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 stream Videostream (MPEG-4)(type: 1b pid: 00ff length: 6)
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0103 length: 12)
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0020 length: 10)
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 stream Datastream (MPEG-2 tabled data)(type: 05 pid: 0105 length: 5)
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 stream Data-/Audiostream (Subtitles/VBI and AC-3)(type: 06 pid: 0030 length: 10)
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0b pid: 0106 length: 14)
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 stream Datastream (DSM CC)(type: 0c pid: 0107 length: 3)
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in PMT
2016/03/31 11:19:10 1D829228 c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
2016/03/31 11:19:10 3565091E p (cccam) cline configuration error!
2016/03/31 11:19:14 1D829228 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/03/31 11:19:23 3565091E p (-) -- Skipped 1 duplicated log lines --
2016/03/31 11:19:23 3565091E p (cccam) cline configuration error!
2016/03/31 11:19:25 1D829228 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2016/03/31 11:19:36 3565091E p (-) -- Skipped 2 duplicated log lines --

die oscam.user hab ich geändert

[TABLE="class: status"]
[TR="class: s"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"][/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5 statuscol5OFF"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]server[/TD]
[TD="class: statuscol12"]0000:0000@000000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:07:12
00:07:11[/TD]
[TD="class: statuscol16 statuscol16OK"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"][/TD]
[TD="class: statuscol4"]root[/TD]
[TD="class: statuscol5 statuscol5OFF"]OFF[/TD]
[TD="class: statuscol7"]127.0.0.1[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]http[/TD]
[TD="class: statuscol12"]0000:0000@000000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"][/TD]
[TD="class: statuscol15"]00:07:11
00:00:00[/TD]
[TD="class: statuscol16 statuscol16OK"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 12"] Proxies 1/1 (0 of 1 online)[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 12"][/TD]
[/TR]
[TR="class: p"]
[TD="class: statuscol0"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol1"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol4"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol5 statuscol5ON"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol7"]0.0.0.0[/TD]
[TD="class: statuscol8"]0[/TD]
[TD="class: statuscol9"]cccam (-)[/TD]
[TD="class: statuscol12"]0000:0000@000000[/TD]
[TD="class: statuscol13"][/TD]
[TD="class: statuscol14"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: statuscol15"]00:07:11
00:07:11[/TD]
[TD="class: statuscol16 statuscol16ERROR"]ERROR[/TD]
[/TR]
[/TABLE]

Glaube habe keine verbindung

 

[Osprey]

AW: Pingulux keine Verbindung zum Server

Schau mal:

2016/03/31 11:19:10 3565091E p    (cccam) cline configuration error!

 

[dj alex z]

AW: Pingulux keine Verbindung zum Server

Du musst in der oscam.server bei dem Reader cline folgendes eintragen.

Spoiler

[COLOR=#333333][reader][/COLOR]
[COLOR=#333333]label = cline[/COLOR]
[COLOR=#333333]description = erhaltene_c-line_vom_server1[/COLOR]
[COLOR=#333333]enable = 1[/COLOR]
[COLOR=#333333]protocol = cccam[/COLOR]
[COLOR=#333333]device = [/COLOR][COLOR=#ff0000]DNS.oder.ip.vom.Kumpel,PortVomKumpel[/COLOR][COLOR=#333333][/COLOR]
[COLOR=#333333]user = Benutzername[/COLOR]
[COLOR=#333333]password = Passwort[/COLOR]
[COLOR=#333333]group = 2[/COLOR]
[COLOR=#333333]cccversion = 2.3.0[/COLOR]
[COLOR=#333333]ccckeepalive = 1[/COLOR]

Die Group muss auch mit deinem Kumpel übereinstimmen

 

[Gizmo31]

Muss gerade schnell mal weg. Werde gleich schauen was da nicht stimmt und mich nochmal melden.

Danke erstmal an alle für eure Mühen und eure Gedult.
Läuft jetzt super!
Hatte im Reader/device das Komma vor dem Port nicht.
Aber einen vorteil hat es! Jetzt hab ich meine Configs wieder aktuell