oscam ymod Cline ärger!!

[camrus]

hallo!
ich habe gestern eine Cline bekommen die sieht so aus ( C: xxxxxxx.com 21000 pass user )
jetzt habe ich im oscam Server eingetragen nix hell ?? was ist darann falsch?

System info
reciver Atemio 520 HD Titan Firmware
Emu oscam ymod
V13 geht einwandfrei rader aktiviert 01
ccam rader ist auch aktiviert 01 aber wird nix hell

*******************************

Spoiler

################## General Instruction - oscam.conf ####################
# #
# per default no changes from the user are needed #
# but verify the IP-range oh your local Network #
# #
############################################################################
[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout = 3
ClientMaxIdle = 120
CacheDelay = 120
BindWait = 5
WaitForCards = 1
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
#LogFile = /var/keys/oscam.log
#usrfile = /var/keys/oscam_usr.log
[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = dvbapi
pmt_mode = 0
######## end of file ########

********************************
oscam Server

Spoiler

############### General Instruction - oscam.server ###################
# To activate/deactivate the reader set enable = 1/0 #
# #
# You might specify further entries in each reader section #
# such as "caid =________" and/or "services = _________" but you needn´t #
# For further details see the OSCAM documentation #
############################################################################

######################### Internal Readers ###############################
# Default Config should work with Seca, Conax, Cryptoworks, Viaccess, NDS #
# #
# For Irdeto, Betacrypt just activate "cardmhz=600" by removing the "#" #
# #
# For Nagra activate and set the correct "rsakey = " and "boxkey = " #
# examples for HDplus HD02 and Sky S02 are included #
# #
# for other Smartcards see the OSCAM documentation #
############################################################################
[reader]
enable = 0
Label = HD+ (Kartenschacht) (schwarze Karte)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 1843
cardmhz = 368
mhz = 368

[reader]
enable = 0
Label = HD+ (Kartenschacht) (weisse Karte)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 357
mhz = 357

[reader]
enable = 0
Label = SKY-DE S02 (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702,1833
cardmhz = 600
mhz = 600

[reader]
enable = 0
Label = SKY-DE V13 (Kartenschacht)
device = /dev/sci0
protocol = internal
detect = CD
group = 1
emmCache = 1,1,2
caid = 09C4
cardmhz = 357
mhz = 500
boxid = 12345678
blockemm-g = 1
ins7e11 = 11

[reader]
enable = 0
Label = SKY-DE V14 (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
cardmhz = 369
mhz = 500
boxid = 12345678
blockemm-g = 1
ins7e11 = 11

[reader]
enable = 0
Label = MTV (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0B00
mhz = 368
cardmhz = 368

[reader]
enable = 0
Label = FreeXTV (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0500
mhz = 357
cardmhz = 368

[reader]
enable = 0
Label = SRG (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0500
mhz = 357
cardmhz = 357
deprecated = 1

[reader]
enable = 0
Label = ORF ice (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0648
mhz = 600
cardmhz = 600
force_irdeto = 1
#deprecated = 1

[reader]
enable = 0
Label = ORF alt (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0D05
mhz = 368
cardmhz = 368
#ident = OD05:000000,000004,00000C,000008,000010

[reader]
enable = 0
Label = skyitalia (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 09CD
mhz = 357
cardmhz = 357
boxid = 1412F60A

[reader]
enable = 0
Label = tivusat (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 183D
mhz = 357
cardmhz = 357

[reader]
enable = 0
Label = KabelD D02 (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 1722,1834
mhz = 600
cardmhz = 600

[reader]
enable = 0
Label = KabelD G09 (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 09C7
mhz = 357
cardmhz = 357
boxid = 12345678

[reader]
enable = 0
Label = Unitymedia UM02 (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 1838
cardmhz = 357
mhz = 357

[reader]
enable = 0
Label = Unitymedia I12 (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 1722
cardmhz = 600
mhz = 600

[reader]
enable = 0
Label = Kabel BW (Kartenschacht)
device = /dev/sci0
Protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 098E
mhz = 357
cardmhz = 357
boxid = 12345678

[reader]
enable = 0
Label = cyfraplus (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0100
mhz = 357
cardmhz = 357

[reader]
enable = 0
Label = tnk (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0b00

[reader]
enable = 0
Label = NL (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,15
detect = CD
group = 1
caid = 0100
mhz = 600
cardmhz = 357

[reader]
enable = 0
Label = Digitürk (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0d00
mhz = 600
cardmhz = 600

[reader]
enable = 0
Label = hallotv (Kartenschacht)
device = /dev/sci0
protocol = internal
emmcache = 1,1,2
detect = CD
group = 1
caid = 0B02
mhz = 600
cardmhz = 357
#################### External Readers / SMARGO ########################
# Important !!!! Use SMARGO Firmware 1.4 or 1.5 #
# With regard to your Smartcard set up the Reader/Smargo as follows: #
# #
# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra #
# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0 #
# #
# For Irdeto, Betacrypt #
# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0 #
# #
# If SMARGO ist in Autoswitch mode, than activate fitting mhz/cardmhz- #
# Entries in the reader-Section #
# # #
# For Nagra activate and complete the "rsakey = " and "boxkey = " and #
# and remove the # in the smargopatch = 1 line #
# example for HDplus is included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
############################################################################
[reader]
enable = 0
Label = HD+ (externer Kartenleser) (weisse Karte)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 357
mhz = 357

[reader]
enable = 0
Label = HD+ (externer Kartenleser) (schwarze Karte)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 1843
mhz = 357
cardmhz = 357
smargopatch = 1

[reader]
enable = 0
Label = SKY-DE S02 (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702,1833
mhz = 600
cardmhz = 600

[reader]
enable = 0
Label = SKY-DE V13 (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 09C4
mhz = 357
cardmhz = 357
boxid = 12345678
blockemm-g = 1
#ins7e11 = 15

[reader]
enable = 0
Label = SKY-DE V14 (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 098C
mhz = 357
cardmhz = 357
boxid = 12345678
#ins7e11 = 15

[reader]
enable = 0
Label = ORF ice (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 0648
mhz = 600
cardmhz = 600
force_irdeto = 1
smargopatch = 1
#deprecated = 1

[reader]
enable = 0
Label = ORF alt (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 0D05
mhz = 368
cardmhz = 368
smargopatch = 1
#ident = OD05:000000,000004,00000C,000008,000010

[reader]
enable = 0
Label = SRG (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
CAID = 0500
mhz = 357
cardmhz = 357
deprecated = 1
smargopatch = 1

[reader]
enable = 0
Label = FreeXTV (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 0500
mhz = 357
cardmhz = 368

[reader]
enable = 0
Label = MTV (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 0B00
mhz = 368
cardmhz = 368

[reader]
enable = 0
Label = skyitalia (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 09CD
mhz = 357
cardmhz = 357
boxid = 1412F60A

[reader]
enable = 0
Label = tivusat (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 183D
mhz = 357
cardmhz = 357

[reader]
enable = 0
Label = cyfraplus (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 0100

[reader]
enable = 0
Label = tnk (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 0b00

[reader]
enable = 0
Label = KabelD D02 (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 1722,1834
mhz = 600
cardmhz = 600
smargopatch = 1

[reader]
enable = 0
Label = KabelD G09 (externer Kartenschacht)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 09C7
mhz = 357
cardmhz = 357
boxid = 12345678

[reader]
enable = 0
Label = Unitymedia UM02 (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 1838
cardmhz = 357
mhz = 357

[reader]
enable = 0
Label = Unitymedia I12 (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = CD
group = 1
caid = 1722
cardmhz = 600
mhz = 600

[reader]
enable = 0
Label = Kabel BW (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 098E
mhz = 357
cardmhz = 357
boxid = 12345678

[reader]
enable = 0
Label = Digitürk (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 0d00
mhz = 600
cardmhz = 600

[reader]
enable = 0
Label = hallotv (externer Kartenleser)
device = /dev/ttyUSB0
protocol = mouse
emmcache = 1,1,2
detect = cd
group = 1
caid = 0B02
mhz = 600
cardmhz = 357
######################### Remote Readers ##############################
# Important !!!! Use this or not in personal responsibility #
# #
# No support in AAF Forum !!! #
# #
# For further details see the OSCAM documentation #
############################################################################
[reader]
enable = 1
Label = cccam-reader
device = C: xxxxxxxxxxxx.com 21000
protocol = cccam
user = xxxxxxxxxxxx
password = xxxxxxxxxx
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11

[reader]
enable = 0
Label = camd35-reader (Cardsharing)
device = IP/dyndns,PORT
protocol = camd35
user = USER
password = PASS
group = 1
emmcache = 1,1,2

[reader]
enable = 0
Label = newcamd-reader (Cardsharing)
device = IP/dyndns,PORT
protocol = newcamd
key = 0102030405060708091011121314
user = USER
password = PASS
group = 1
emmcache = 1,1,2
######## end of file ########

 

[reppo]

AW: oscam ymod Cline ärger!!

Schlau, wir haben jetzt alle Deinen User und Passwort, den du vom Payserver bekommen hast.

device = C: xxxxxxxx.com 21000
protocol = cccam
user = q7QLj2Y8HZ
password = W8q6BRCbGMpr

Fehler ist wohl offensichtlich.

 

[janni1]

AW: oscam ymod Cline ärger!!

Hi,
versuch es mal mit:

device = xxxxxxx.com,21000

und mach mal die ganzen RSA/boxkeys unkenntlich, die werden hier nicht so gern gesehen.

Gruß
janni1

 

[Pilot]

AW: oscam ymod Cline ärger!!

für pay Server kein support.
Daher zu.

Frage bitte seinem Line Spender