OSCam und v13

2011/01/30 20:13:48  31293 s   http started (pid=31296)
2011/01/30 20:13:48  31296 h   HTTP Server listening on port 10001
2011/01/30 20:13:48  31293 s   reader started (pid=31297, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/01/30 20:13:48  31293 s   waiting for local card init
2011/01/30 20:13:51  31297 r02 card detected
2011/01/30 20:13:57  31297 r02 ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2011/01/30 20:13:59  31297 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/01/30 20:14:00  31297 r02 [videoguard2-reader] type: VideoGuard Sky Germany, baseyear: 1997
2011/01/30 20:14:02  31297 r02 card system not supported
2011/01/30 20:14:02  31297 r02 Normal mode failed, reverting to Deprecated Mode
2011/01/30 20:14:02  31297 r02 using ATR from reader config
2011/01/30 20:14:02  31297 r02 ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2011/01/30 20:14:03  31297 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/01/30 20:14:04  31297 r02 [videoguard2-reader] type: VideoGuard Sky Germany, baseyear: 1997
2011/01/30 20:14:06  31297 r02 card system not supported
2011/01/30 20:14:06  31297 r02 card initializing error
2011/01/30 20:14:06  31293 s   init for all local cards done

[reader]
label = ReaderExtern1
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
Group = 1
services = skyde_v13
boxid = 12345678
mhz = 357
CAID = 09c4