gelöst OSCam und How To Do

[KleenOthek]

dodo83:

HDPlus läuft auf dem Server !!

Karten im oberen Kartenschacht und alles ist gut.

Nur die clients eben nicht, auch nicht mit der Oscam.user Änderung!

Auf dem client steht im LOG:

Spoiler

2019/06/23 15:03:28 p (reader) CCCamServer [cccam] connecting to 192.168.1.19:12000
2019/06/23 15:03: p (reader) CCCamServer [cccam] connect failed: Connection refused
2019/06/23 15:03: p (cccam) Remote-CCcam configuration error!
2019/06/23 15:03: p (reader) CCCamServer [cccam] connecting to 192.168.1.19:12000
2019/06/23 15:03: p (reader) CCCamServer [cccam] connect failed: Connection refused
2019/06/23 15:03: p (cccam) Remote-CCcam configuration error!
2019/06/23 p (-) -- Skipped 1 duplicated log lines --
2019/06/23 15:04:07 p (reader) CCCamServer [cccam] connecting to 192.168.1.19:12000
2019/06/23 15:04:0 p (reader) CCCamServer [cccam] connect failed: Connection refused
2019/06/23 15:04:20 p (cccam) Remote-CCcam configuration error!
2019/06/23 15:05:12 p (-) -- Skipped 3 duplicated log lines --
2019/06/23 15:05:12 p (-) -- Skipped 1 duplicated log lines --
2019/06/23 15:05:12 p (reader) CCCamServer [cccam] connecting to 192.168.1.19:12000
2019/06/23 15:05:12 p (reader) CCCamServer [cccam] connect failed: Connection refused
2019/06/23 15:05:25 p (cccam) Remote-CCcam configuration error!


im Log Server steht:

• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] ROM: xxxxxxxxxxx
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] REV: R e v G C 6
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] SER: ############
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] CAID: 1830
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] Prv.ID: xx xx xx xx (sysid)
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] Prv.ID: 00 00 00 00
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] IRD ID: ############
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] active to: 2019/08/14 12:59
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] -----------------------------------------
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] |id |tier |valid from |valid to |
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] +----+--------+------------+------------+
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] |8011|0064 |2010/12/30 |2011/12/31 |
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] |8011|0BB8 |2019/05/18 |2019/08/10 |
• 2019/06/23 15:01:33 6596FE95 r (reader) HDplus-Slot1 [nagra] -----------------------------------------
• 2019/06/23 15:01:34 00000000 s (main) init for all local cards done
• 2019/06/23 15:01:34 00000000 s (emmcache) loaded 1 emmcache records from /etc/tuxbox/config/oscamstressless/oscam.emmcache in 0 ms
• 2019/06/23 15:01:34 00000000 s (emmcache) loaded 43 emmstat records from /etc/tuxbox/config/oscamstressless/oscam.emmstat in 1 ms
• 2019/06/23 15:01:34 77E04847 c (client) plain dvbapi-client granted (dvbapiau, au=auto (15 reader))
• 2019/06/23 15:01:34 77E04847 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscamstressless/oscam.ccache
• 2019/06/23 15:01:34 77E04847 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2019/06/23 15:01:34 77E04847 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
• 2019/06/23 15:01:34 77E04847 c (dvbapi) PMT6 CA PMT Server connected on fd 15!
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 1860 ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 098D ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 7 CAID: 186D ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 8 CAID: 0500 ECM_PID: xxxx PROVID: 051900
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 9 CAID: 06CB ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 10 CAID: 1842 ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 ecmpid 11 CAID: 4B64 ECM_PID: xxxx PROVID: 000000
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 found 12 ECMpids and 4 STREAMpids in caPMT
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1830 PROVID 000000 ECMPID 1CEA ANY CHID PMTPID 0060 VPID 00FF
• 2019/06/23 15:01:59 77E04847 c (dvbapi) Demuxer 0 found 12 ECMpids and 4 STREAMpids in PMT
• 2019/06/23 15:01:59 6F742764 r (emu) Key not found: N DA19 00
• 2019/06/23 15:01:59 6F742764 r (emu) ECM failed: Key not found
• 2019/06/23 15:01:59 77E04847 c (ecm) dvbapiau (1830@000000/0000/EF74/ xxxxxxxxxxxxxxxxxxxxxxxxxxxx): found (312 ms) by HDplus-Slot1 (P/2/2/2) - SAT.1 HD
• 2019/06/23 15:02:02 77E04847 c (ecm) dvbapiau (1830@000000/0000/EF74/xxxxxxxxxxxxxxxxxxxxxxxxx): found (314 ms) by HDplus-Slot1 (P/1/1/2) - SAT.1 HD
• 2019/06/23 15:02:06 77E04847 c (dvbapi) Demuxer 0 stop descrambling program number EF74 (SAT.1 HD)
• 2019/06/23 15:02:06 77E04847 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
• 2019/06/23 15:02:06 77E04847 c (dvbapi) PMT6 CA PMT Server connected on fd 15!

Grüße,
KleenOthek

 

[dodo83]

Dann zeig mal bitte jetzt wie die Client Konfiguration ist, zeig mal bitte
Laut deinem log oben existiert so ein Account nicht welchen du am Client eingetragen hast

 

[KleenOthek]

Osca.config-client:

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn SVN r11438

[global]
logfile = /var/log/oscam.log
disablecrccws_only_for = 09C4:000000;098C:000000;098D:000000

[cache]

[cccam]
port = 12000
serverip = 192.168.1.18
nodeid = EA4FA29F102214E0
version = 2.0.11

[streamrelay]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = local
boxtype = dreambox

[webif]
httpport = 8080
httpuser = oscam
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1


Oscam.user:

# oscam.user generated automatically by Streamboard OSCAM 1.20_svn SVN r11438

[account]
user = local
au = 1
group = 1

[account]

user = sz
pwd = sz
group = 1

[account]

user = buero
pwd = buero
group = 1

Oscam.server:
# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11438
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = HDplus-Slot1
protocol = internal
device = /dev/sci0
caid = 1830,1843,1860,186A
boxkey = xxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxx
detect = cd
cardmhz = 2700
group = 1
emmcache = 1,1,2,0

[reader]
label = HDplus-Slot2
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830,1843,1860,186A
boxkey =xxxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxx
detect = cd
cardmhz = 2700
group = 2
emmcache = 1,1,2,0

[reader]
label = HDplus-EasyMouse2
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 1830,1843,1860,186A
boxkey = xxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxx
detect = cd
cardmhz = 2700
group = 2
emmcache = 1,1,2,0

[reader]
label = HDplus-Smargo
enable = 0
protocol = smartreader
device = 001:002
caid = 1830,1843,1860,186A
boxkey = xxxxxxxxxxxxxxxxxxxxx
rsakey =xxxxxxxxxxxxxxxxxxxxxxxx
detect = cd
mhz = 534
cardmhz = 369
group = 2
emmcache = 1,1,2,0

[reader]
label = ORF-Cryptoworks-Slot1
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95,0D98
detect = cd
cardmhz = 2700
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = ORF-Cryptoworks-Slot2
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95,0D98
detect = cd
cardmhz = 2700
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = ORF-Cryptoworks-EasyMouse2
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 0D95,0D98
detect = cd
cardmhz = 2700
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = ORF-Cryptoworks-Smargo
enable = 0
protocol = smartreader
device = 001:002
caid = 0D95,0D98
detect = cd
mhz = 534
cardmhz = 369
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = ORF-Irdeto-Slot1
enable = 0
protocol = internal
device = /dev/sci0
caid = 0648,0650
boxkey = xxxxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxx
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = ORF-Irdeto-Slot2
enable = 0
protocol = internal
device = /dev/sci1
caid = 0648,0650
boxkey = xxxxxxxxxx
rsakey = xxxxxxxxxxx
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = ORF-Irdeto-EasyMouse2
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 0648,0650
boxkey = xxxxxxxxx
rsakey = xxxxxxxxx
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = ORF-Irdeto-Smargo
enable = 0
protocol = smartreader
device = 001:002
caid = 0648,0650
boxkey = xxxxxxxx
rsakey = xxxxxxx
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-g = 1

[reader]
label = CCCamServer
description = CCcam-Server
protocol = cccam
device = 192.168.1.19,12000
user = cccam
password = cccam
inactivitytimeout = 30
group = 3
cccversion = 2.3.0
ccckeepalive = 1

[reader]
label = NewcamdServer
enable = 0
protocol = newcamd
device = xxxxxxxxxxxxx
key = xxxxxxxxxxxxxx
user = user
password = password
group = 4

[reader]
label = Camd3Server
enable = 0
protocol = cs357x
device = 192.168.0.10,55125
user = user
password = password
group = 5

[reader]
label = Keyfile
protocol = emu
device = emulator
detect = cd
group = 6

[reader]
label = Remote-CCcam
description = cccam
protocol = cccam
device = 192.168.1.19,12000
inactivitytimeout = 30
caid = 1830
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

Grüße,
KleenOthek

 

[dodo83]

Wieso übernimmst du nicht die tiny cute configs mit angabe von deinen User Datem vom Server.
In der oscam.user am Client brauchst du die Account wie am Server nicht.
In der oscam.server hast fu 2 Proxys welche auf den Server verbinden, einmal mit Daten welche am Server nicht hinterlegt sind und zweitens ganz ohne user/pass

 

[filius00]

[reader]
label = Remote-CCcam
description = cccam
protocol = cccam
device = 192.168.1.19,12000
inactivitytimeout = 30
caid = 1830
group = 1
cccversion = 2.3.0

Das ist der einzige Proxy welcher auf den Clients (bezüglich HD+) nötig ist. Da fehlen aber User, Pass, sagte ja auch das Logg

 

[KleenOthek]

@dodo83 :

Also ist meine Serverbox und meine ckient boxen indentisch mit allen configs der oscam, einziger unterschied sind dann die oscam.user ???
habe ich das richtig verstanden???
Greez

 

[dodo83]

nö, hast du nicht

schau mal....

Spoiler: SERVER

oscam.config:

[global]
logfile = /home/root/logs/oscam.log
unlockparental = 1
nice = -1
maxlogsize = 2048
emmlogdir =

[cache]

[cccam]
port = 12000
version = 2.3.0

[streamrelay]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 8080
httphelplang = de
httprefresh = 15
httphidetype = sh
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255,10.0.0.0-10.255.255.255
hideclient_to = 15

Oscam.user:

[account]
user = dvbapiau
au = 1
group = 1,2,3,4,5,6

[account]
user = sz
pwd = sz
group = 1

[account]
user = buero
pwd = buero
group = 1

Oscam.server:

[reader]
label = HDplus-Slot1
protocol = internal
device = /dev/sci0
caid = 1830,1843,1860,186A
boxkey = XXXXXXXX
rsakey = XXXXXXXX
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,1,2,0

[reader]
label = HDplus-Slot2
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
boxkey = XXXXXX
rsakey = XXXXXXX
detect = cd
cardmhz = 2700
group = 1
emmcache = 1,1,2,0

Spoiler: CLIENT

oscam.conf

[global]
logfile = /var/log/oscam.log


[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 83
httpuser = oscam
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

oscam.user

[account]
user = local
au = 1
group = 1

oscam.server

[reader]
label = Remote-CCcam
protocol = cccam
device = 192.168.175.19,12000
user = sz
password = sz
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1

beim Zweitem Client kommt in die oscam.server buero/buero rein unter user/password, der Rest bleibt gleich

 

[KleenOthek]

Guten Abend dodo83,
In den letzten Tagen habe ich einiges ausprobiert .. :-( ....

Jedoch läuft die sc**** HDPlus Karte nur im Server perfekt.

Meine zwei Clients ( inhouse) wollen einfach nicht.

Wie komme ich denn nun an mein erhoffter Ziel,
Mein Home CS funktionierend zu beenden, ohne die Karte zu zerschneiden ....

Viele Grüsse,
Kleenothek.....

 

[pehedima]

Poste die oscam.log vom Server und Client während eines Clientzugriffs auf den Server

 

[KleenOthek]

Ok, kann ich machen, sobald ich wieder zuhause bin...

Bin aktuel unterwegs und hatte gerade etwas Zeit .....

Danke für die super schnelle Antwort!!!

Greetz, KleenOthek

 

[Derek Buegel]

Eliminiere WLan, DLan und wie das kabellose Zeug's sich sonst noch nennt. Das schließ schon einige Fehlerquellen aus.

MfG

 

[filius00]

Wie komme ich denn nun an mein erhoffter Ziel,

@dodo83 hat ein komplettes Server -- Client Gespann oben gepostet. Wenn du ihn nett fragst kommt er auch vorbei und spielt es ein.....
Jetzt mal im Ernst: Du gibst keinerlei Infos was du bisher gemacht hast und als Status kommt "es geht nicht" - toll.
Dann fragst du erneut an, bist aber nicht mal vor Ort. Das hier umgehend geantwortet wird ist allgemein bekannt, da bringt es nichts wenn man selbst nicht mal direkt was auf Nachfrage liefern kann.

 

[bubbl]

OSCam und How To Do gelesen?

ja im ernst, das heißt aber oscam Wiki und wird jeden tag gepflegt

 

[KleenOthek]

Hallo zusammen,

das ist der Oscam.server LOG:

• Spoiler

  2019/06/27 22:24:43 00000000 s (main) System name = Linux
  [*]2019/06/27 22:24:43 00000000 s (main) Host name = gbquadplus
  [*]2019/06/27 22:24:43 00000000 s (main) Release = 4.8.3
  [*]2019/06/27 22:24:43 00000000 s (main) Version = #1 SMP Fri Dec 28 12:22:44 UTC 2018
  [*]2019/06/27 22:24:43 00000000 s (main) Machine = mips
  [*]2019/06/27 22:24:43 00000000 s (main) Stb model = gbquadplus
  [*]2019/06/27 22:24:43 00000000 s (main) Stb vumodel = vuultimo
  [*]2019/06/27 22:24:43 00000000 s (main) Stb boxtype = gigablue
  [*]2019/06/27 22:24:43 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 26064
  [*]2019/06/27 22:24:43 00000000 s (emu) OSCam-Emu version 777
  [*]2019/06/27 22:24:43 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
  [*]2019/06/27 22:24:43 00000000 s (main) signal handling initialized
  [*]2019/06/27 22:24:43 00000000 s (config) 2 provid's loaded
  [*]2019/06/27 22:24:43 00000000 s (config) 17 service-id's loaded in 1 ms
  [*]2019/06/27 22:24:43 00000000 s (reader) HDplus-Slot1 [internal] creating thread for device /dev/sci0
  [*]2019/06/27 22:24:43 00000000 s (reader) HDplus-Slot2 [internal] creating thread for device /dev/sci1
  [*]2019/06/27 22:24:43 00000000 s (reader) CCCamServer [cccam] creating thread for device 192.168.1.19
  [*]2019/06/27 22:24:43 00000000 s (reader) Remote-CCcam [cccam] creating thread for device 192.168.1.19
  [*]2019/06/27 22:24:43 6F742764 r (reader) HDplus-Slot2 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
  [*]2019/06/27 22:24:43 6F742764 r (reader) HDplus-Slot2 [internal] Reader sci internal, detected box type: gigablue
  [*]2019/06/27 22:24:43 3DCF3CDE p (reader) 192.168.1.19: resolved ip=192.168.1.19
  [*]2019/06/27 22:24:43 3DCF3CDE p (reader) Remote-CCcam [cccam] connecting to 192.168.1.19:12000
  [*]2019/06/27 22:24:43 6596FE95 r (reader) HDplus-Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
  [*]2019/06/27 22:24:43 6596FE95 r (reader) HDplus-Slot1 [internal] Reader sci internal, detected box type: gigablue
  [*]2019/06/27 22:24:43 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  [*]2019/06/27 22:24:43 00000000 s (main) waiting for local card init
  [*]2019/06/27 22:24:43 54EA8FF4 p (cccam) CCCamServer configuration error!
  [*]2019/06/27 22:24:43 54EA8FF4 p (reader) CCCamServer [cccam] proxy initialized, server 192.168.1.19:0
  [*]2019/06/27 22:24:43 54EA8FF4 p (cccam) CCCamServer configuration error!
  [*]2019/06/27 22:24:43 6596FE95 r (reader) HDplus-Slot1 [internal] card detected
  [*]2019/06/27 22:24:43 4FC7A740 h (webif) webif: decompressed 178931 bytes back into 441816 bytes
  [*]2019/06/27 22:24:43 3DCF3CDE p (reader) Remote-CCcam [cccam] connect failed: Connection refused
  [*]2019/06/27 22:24:43 4FC7A740 h (webif) HTTP Server running. ip=:: port=8080
  [*]2019/06/27 22:24:43 3DCF3CDE p (reader) Remote-CCcam [cccam] proxy initialized, server 192.168.1.19:12000
  [*]2019/06/27 22:24:43 6596FE95 r (reader) HDplus-Slot1 [internal] ATR: xx xx xx xx xx xx xx xx xx xx xx
  [*]2019/06/27 22:24:43 6596FE95 r (reader) HDplus-Slot1 [internal] HD-Plus 01 recognized
  [*]2019/06/27 22:24:48 6596FE95 r (reader) HDplus-Slot1 [internal] Buffers readed 0 bytes total time_us 5148969
  [*]2019/06/27 22:24:50 6596FE95 r (reader) HDplus-Slot1 [internal] detect native nagra card
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [internal] ready for requests
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [internal] found card system nagra
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] ROM: x x x x x
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] REV: x x x x x x
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] SER: ############
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] CAID: 1830
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] Prv.ID: x x x x x (sysid)
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] Prv.ID: 00 00 00 00
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] IRD ID: ############
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] active to: 2019/08/15 12:59
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] -----------------------------------------
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] |id |tier |valid from |valid to |
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] +----+--------+------------+------------+
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] |8011|0064 |2010/12/30 |2011/12/31 |
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] |8011|0BB8 |2019/05/18 |2019/08/13 |
  [*]2019/06/27 22:24:51 6596FE95 r (reader) HDplus-Slot1 [nagra] -----------------------------------------
  [*]2019/06/27 22:24:52 00000000 s (main) init for all local cards done
  [*]2019/06/27 22:24:52 00000000 s (emmcache) loaded 6 emmcache records from /etc/tuxbox/config/oscamstressless/oscam.emmcache in 0 ms
  [*]2019/06/27 22:24:52 00000000 s (emmcache) loaded 48 emmstat records from /etc/tuxbox/config/oscamstressless/oscam.emmstat in 1 ms
  [*]2019/06/27 22:24:52 45B337D7 c (client) plain dvbapi-client granted (dvbapiau, au=auto (5 reader))
  [*]2019/06/27 22:24:52 45B337D7 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscamstressless/oscam.ccache
  [*]2019/06/27 22:24:52 45B337D7 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
  [*]2019/06/27 22:24:52 45B337D7 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
  [*]2019/06/27 22:24:52 45B337D7 c (dvbapi) PMT6 CA PMT Server connected on fd 13!
  [*]2019/06/27 22:24:52 45B337D7 c (dvbapi) Demuxer 0 found 0 ECMpids and 8 STREAMpids in caPMT
  [*]2019/06/27 22:24:52 45B337D7 c (dvbapi) Demuxer 0 found 0 ECMpids and 8 STREAMpids in PMT
  [*]2019/06/27 22:24:56 54EA8FF4 p (cccam) CCCamServer configuration error!

Das ist der oscam.log client :

• Spoiler

  2019/06/27 22:24:54 00000000 s (main) System name = Linux
  [*]2019/06/27 22:24:54 00000000 s (main) Host name = gbquadplus
  [*]2019/06/27 22:24:54 00000000 s (main) Release = 4.8.3
  [*]2019/06/27 22:24:54 00000000 s (main) Version = #1 SMP Fri Dec 28 12:22:44 UTC 2018
  [*]2019/06/27 22:24:54 00000000 s (main) Machine = mips
  [*]2019/06/27 22:24:54 00000000 s (main) Stb model = gbquadplus
  [*]2019/06/27 22:24:54 00000000 s (main) Stb vumodel = vuultimo
  [*]2019/06/27 22:24:54 00000000 s (main) Stb boxtype = gigablue
  [*]2019/06/27 22:24:54 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1292
  [*]2019/06/27 22:24:54 00000000 s (emu) OSCam-Emu version 777
  [*]2019/06/27 22:24:54 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
  [*]2019/06/27 22:24:54 00000000 s (main) signal handling initialized
  [*]2019/06/27 22:24:54 00000000 s (config) 1 provid's loaded
  [*]2019/06/27 22:24:54 00000000 s (config) 7 service-id's loaded in 0 ms
  [*]2019/06/27 22:24:54 00000000 s (reader) HDplus-Slot1 [internal] creating thread for device /dev/sci0
  [*]2019/06/27 22:24:54 00000000 s (reader) Remote-CCcam [cccam] creating thread for device 192.168.1.19
  [*]2019/06/27 22:24:54 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  [*]2019/06/27 22:24:54 00000000 s (main) waiting for local card init
  [*]2019/06/27 22:24:54 457EB571 r (reader) HDplus-Slot1 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
  [*]2019/06/27 22:24:54 457EB571 r (reader) HDplus-Slot1 [internal] Reader sci internal, detected box type: gigablue
  [*]2019/06/27 22:24:54 4840A0F2 p (reader) 192.168.1.19: resolved ip=192.168.1.19
  [*]2019/06/27 22:24:54 4840A0F2 p (reader) Remote-CCcam [cccam] connecting to 192.168.1.19:12000
  [*]2019/06/27 22:24:54 3581CA87 h (webif) webif: decompressed 178931 bytes back into 441816 bytes
  [*]2019/06/27 22:24:54 3581CA87 h (webif) HTTP Server running. ip=:: port=8080
  [*]2019/06/27 22:24:54 4840A0F2 p (reader) Remote-CCcam [cccam] connect failed: Connection refused
  [*]2019/06/27 22:24:54 4840A0F2 p (reader) Remote-CCcam [cccam] proxy initialized, server 192.168.1.19:12000
  [*]2019/06/27 22:24:56 00000000 s (main) init for all local cards done
  [*]2019/06/27 22:24:56 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
  [*]2019/06/27 22:24:56 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
  [*]2019/06/27 22:24:56 2327E4E7 c (client) plain dvbapi-client granted (anonymous, au=off)
  [*]2019/06/27 22:24:56 2327E4E7 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscamstressless/oscam.ccache
  [*]2019/06/27 22:24:56 2327E4E7 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
  [*]2019/06/27 22:25:00 2327E4E7 c (dvbapi) Demuxer 0 found 0 ECMpids and 5 STREAMpids in caPMT
  [*]2019/06/27 22:25:00 2327E4E7 c (dvbapi) Demuxer 0 found 0 ECMpids and 5 STREAMpids in PMT

grüße, KleenOthek

 

[filius00]

LOG

Jetzt bitte die kompletten Configs (getrennt im Spoiler) der beiden Geräte die diese Loggs ergeben. So wie es aussieht haben diese, laut der Loggs, mit @dodo's geposteten rein gar nichts zu tun.