OScam UM02 bitte um Hilfe

[Fantomas303]

Hallo zusammen,

bei einem Kollegen seiner Box soll eine UM02 Karte mit Oscam betrieben werden. Leider komme ich nicht weiter.

Box: ET9500 mit pli3.0

Abonierte Sender wie TNT Serie etc. werden nicht hell - kann mir bitte jemand helfen.

Vielen Dank vorab.

Oscam svn8515



Oscam Config

Spoiler

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log;stdout
maxlogsize = 256

[webif]
HttpPort = 83
httptpl = /var/tuxbox/config/
httpcss = /var/tuxbox/config/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.0.1-192.168.255.255
#HttpReadOnly = 1

[dvbapi]
Enabled = 1
Boxtype = dreambox
User = DVBApi
decodeforever = 1
AU = 1

Oscam User

Spoiler

[account]
user = DVBApi
au = um02
group = 1
caid = 1838

Oscam Server

Spoiler

[reader]
label = UM02
protocol = internal
device = /dev/sci0
services = umbasic,!umbasic,umplus,!umplus
caid = 1838
boxkey = A7****C
rsakey = B5****F
detect = cd
cardmhz = 368
group = 1

dvbapi

Spoiler

P: 1838
I: 0

 

[bombadil]

AW: OScam UM02 bitte um Hilfe

Hi,

sind deine Services aktuell? Wenn du nicht sicher bist, dann nimm bitte diese Zeile mal raus

services                      = umbasic,!umbasic,umplus,!umplus

Grüße
Bombadil

 

[Fantomas303]

AW: OScam UM02 bitte um Hilfe

Guten Morgen,

ich habe die Services aus der Server rausgenommen

Server

Spoiler

[reader]
label = UM02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7****C
rsakey = B55***FF
detect = cd
cardmhz = 368
group = 1

Hier noch das Log - die Karte bekommt keine Entitlements

Log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 01:00:24 1970
-------------------------------------------------------------------------------
1970/01/01 01:00:24 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8515 (mipsel-unknown-linux-gnu)
1970/01/01 01:00:24 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 369
1970/01/01 01:00:24 0 s The current system time is smaller than the build date (Mar 8 2013). Waiting up to 60 seconds for time to correct
2013/03/17 07:14:32 0 s services reloaded: 0 services freed, 9 services loaded, rejected 0
2013/03/17 07:14:32 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/03/17 07:14:32 0 s signal handling initialized
2013/03/17 07:14:32 0 s 334 service-id's loaded in 15ms
2013/03/17 07:14:32 0 s 14 provid's loaded
2013/03/17 07:14:32 0 s UM02 [internal] creating thread for device /dev/sci0
2013/03/17 07:14:32 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/17 07:14:32 0 s waiting for local card init
2013/03/17 07:14:32 528A30 r UM02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=368)
2013/03/17 07:14:32 519368 h webif: decompressed 52443 bytes back into 151608 bytes
2013/03/17 07:14:32 519368 h HTTP Server listening on port 83
2013/03/17 07:14:33 0 s init for all local cards done
2013/03/17 07:14:33 0 s anti cascading disabled
2013/03/17 07:14:33 52D9B8 c plain dvbapi-client granted (DVBApi, au=off)
2013/03/17 07:14:33 52D9B8 c Detected /dev/dvb/adapter0/demux0 Api: 0
2013/03/17 07:14:37 52D9B8 c [ADD PID 0] CAID: 1722 ECM_PID: 179C PROVID: 000000
2013/03/17 07:14:37 52D9B8 c [ADD PID 1] CAID: 1831 ECM_PID: 1A9C PROVID: 000000
2013/03/17 07:14:37 52D9B8 c [ADD PID 2] CAID: 1835 ECM_PID: 1C84 PROVID: 000000
2013/03/17 07:14:37 52D9B8 c [ADD PID 3] CAID: 1838 ECM_PID: 1E84 PROVID: 000000
2013/03/17 07:14:37 52D9B8 c Found 4 ECMpids and 4 STREAMpids in PMT
2013/03/17 07:14:37 52D9B8 c New program number: 0032 (TNT Serie) [pmt_list_management 3]
2013/03/17 07:14:37 52D9B8 c Start descrambling PID #0 (CAID: 1722) 1

 

[Kermit]

AW: OScam UM02 bitte um Hilfe

Hi,

da liegst du mit deiner Einschätzung aber daneben.
Laut deinem Logfile wird gar keine Karte gefunden im angegebenen Device. Steckt die Karte im richtigem Slot, steckt sie richrig herum drinnen?

Grüße

Kermit

 

[Fantomas303]

AW: OScam UM02 bitte um Hilfe

Hi und guten Morgen,

komisch. Ich habe sie so reingesteckt wie bei meiner 9000er - chip unten vorne. Auch ginge ich davon aus das auf der 9500er die Reader gleich sind - also /dev/sci0 unten.

Wie dem auch sei - hab die Karte jetzt mal oben reingesteckt - läuft auch nicht

Log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 01:00:24 1970
-------------------------------------------------------------------------------
1970/01/01 01:00:24 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8515 (mipsel-unknown-linux-gnu)
1970/01/01 01:00:24 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 368
1970/01/01 01:00:24 0 s The current system time is smaller than the build date (Mar 8 2013). Waiting up to 60 seconds for time to correct
2013/03/17 07:39:11 0 s services reloaded: 0 services freed, 9 services loaded, rejected 0
2013/03/17 07:39:11 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/03/17 07:39:11 0 s signal handling initialized
2013/03/17 07:39:11 0 s 334 service-id's loaded in 13ms
2013/03/17 07:39:11 0 s 14 provid's loaded
2013/03/17 07:39:11 0 s UM02 [internal] creating thread for device /dev/sci0
2013/03/17 07:39:11 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/17 07:39:11 0 s waiting for local card init
2013/03/17 07:39:11 519370 r UM02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=368)
2013/03/17 07:39:11 528A20 h webif: decompressed 52443 bytes back into 151608 bytes
2013/03/17 07:39:11 528A20 h HTTP Server listening on port 83
2013/03/17 07:39:11 519370 r UM02 [internal] card detected
2013/03/17 07:39:15 519370 r UM02 [internal] Error activating card.
2013/03/17 07:39:25 0 --- Skipped 2 duplicated log lines ---
2013/03/17 07:39:25 519370 r UM02 [internal] card initializing error
2013/03/17 07:39:25 0 s init for all local cards done
2013/03/17 07:39:25 0 s anti cascading disabled
2013/03/17 07:39:25 52DEE8 c plain dvbapi-client granted (DVBApi, au=off)
2013/03/17 07:39:25 52DEE8 c Detected /dev/dvb/adapter0/demux0 Api: 0
2013/03/17 07:39:26 52DEE8 c [ADD PID 0] CAID: 1722 ECM_PID: 179C PROVID: 000000
2013/03/17 07:39:26 52DEE8 c [ADD PID 1] CAID: 1831 ECM_PID: 1A9C PROVID: 000000
2013/03/17 07:39:26 52DEE8 c [ADD PID 2] CAID: 1835 ECM_PID: 1C84 PROVID: 000000
2013/03/17 07:39:26 52DEE8 c [ADD PID 3] CAID: 1838 ECM_PID: 1E84 PROVID: 000000
2013/03/17 07:39:26 52DEE8 c Found 4 ECMpids and 4 STREAMpids in PMT
2013/03/17 07:39:26 52DEE8 c New program number: 0032 (TNT Serie) [pmt_list_management 3]
2013/03/17 07:39:26 52DEE8 c Start descrambling PID #0 (CAID: 1722) 1

 

[Kermit]

AW: OScam UM02 bitte um Hilfe

Hi,

immerhin wird jetzt mal eine Karte erkannt. Trag in deiner oscam.server noch zusätzlich
mhz = 368
ein und schau was passiert.

Grüße

Kermit

 

[Fantomas303]

AW: OScam UM02 bitte um Hilfe

Hi,

Server neu

Spoiler

[reader]
label = UM02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7****C
rsakey = B55****FF
detect = cd
cardmhz = 368
mhz = 368
group = 1

Log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 01:00:24 1970
-------------------------------------------------------------------------------
1970/01/01 01:00:24 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8515 (mipsel-unknown-linux-gnu)
1970/01/01 01:00:24 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 368
1970/01/01 01:00:24 0 s The current system time is smaller than the build date (Mar 8 2013). Waiting up to 60 seconds for time to correct
2013/03/17 08:00:18 0 s services reloaded: 0 services freed, 9 services loaded, rejected 0
2013/03/17 08:00:18 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2013/03/17 08:00:18 0 s signal handling initialized
2013/03/17 08:00:18 0 s 334 service-id's loaded in 15ms
2013/03/17 08:00:18 0 s 14 provid's loaded
2013/03/17 08:00:18 0 s UM02 [internal] creating thread for device /dev/sci0
2013/03/17 08:00:18 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/17 08:00:18 0 s waiting for local card init
2013/03/17 08:00:18 519370 r UM02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2013/03/17 08:00:18 528828 h webif: decompressed 52443 bytes back into 151608 bytes
2013/03/17 08:00:18 528828 h HTTP Server listening on port 83
2013/03/17 08:00:18 519370 r UM02 [internal] card detected
2013/03/17 08:00:22 519370 r UM02 [internal] Error activating card.
2013/03/17 08:00:32 0 --- Skipped 2 duplicated log lines ---
2013/03/17 08:00:32 519370 r UM02 [internal] card initializing error
2013/03/17 08:00:32 0 s init for all local cards done
2013/03/17 08:00:32 0 s anti cascading disabled
2013/03/17 08:00:32 52DDF8 c plain dvbapi-client granted (DVBApi, au=off)
2013/03/17 08:00:32 52DDF8 c Detected /dev/dvb/adapter0/demux0 Api: 0
2013/03/17 08:00:33 52DDF8 c [ADD PID 0] CAID: 1722 ECM_PID: 179C PROVID: 000000
2013/03/17 08:00:33 52DDF8 c [ADD PID 1] CAID: 1831 ECM_PID: 1A9C PROVID: 000000
2013/03/17 08:00:33 52DDF8 c [ADD PID 2] CAID: 1835 ECM_PID: 1C84 PROVID: 000000
2013/03/17 08:00:33 52DDF8 c [ADD PID 3] CAID: 1838 ECM_PID: 1E84 PROVID: 000000
2013/03/17 08:00:33 52DDF8 c Found 4 ECMpids and 4 STREAMpids in PMT
2013/03/17 08:00:33 52DDF8 c New program number: 0032 (TNT Serie) [pmt_list_management 3]
2013/03/17 08:00:33 52DDF8 c Start descrambling PID #0 (CAID: 1722) 1

 

[Kermit]

AW: OScam UM02 bitte um Hilfe

Hi,

die Karte ist im richtigem Slot, aber vermutlich zeigt der Chip nicht in die richtige Richtung.

Grüße

Kermit

 

[Fantomas303]

AW: OScam UM02 bitte um Hilfe

Hi Kermit,

tatsächlich - die Reader der 9500er sind anscheinend anders. Karte oben mit Chip nach oben läuft - jetzt läuft sie.

Poste anschließend noch mal meine Configs - gibts noch etwas wichtiges was man optimieren/änderen sollte/müßte?

1000 Dank dir.

Config

Spoiler

[global]
logfile = stdout;/tmp/oscam.log
nice = -1
maxlogsize = 256
preferlocalcards = 1

[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = DVBApi
boxtype = dreambox

[webif]
httpport = 83
httpcss = /etc/tuxbox/config/oscam-stable/coolstream-to.css
httptpl = /var/tuxbox/config/
httprefresh = 10
httpallowed = 192.168.0.1-192.168.255.255

User

Spoiler

[account]
user = DVBApi
au = um02
group = 1
caid = 1838

Server

Spoiler

[reader]
label = UM02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7****C
rsakey = B55*****FF
detect = cd
cardmhz = 368
mhz = 368
group = 1

 

[Kermit]

AW: OScam UM02 bitte um Hilfe

Hi,

hab dir mal blau gekennzeichnet was raus könnte. Solange du nur diese eine Karte im Betrieb hast ist es aber nicht zwingend notwendig.
Zusätzlich würde ich noch in der oscam.dvbapi folgendes eintragen
P: 1838
I: 0

Grüße

Kermit

 

[Fantomas303]

AW: OScam UM02 bitte um Hilfe

Hi,

P: 1838
I: 0

war schon drin.
Rest habe ich von dir noch übernommen.

Nachmal 1000 Dank - super Forum - super User.
Schönes Wochenende noch!