AW: OScam smargo Problem
2010/04/17 19:47:02 3107 s init for all local cards done
2010/04/17 19:47:02 3107 s anti cascading disabled
2010/04/17 19:47:03 3118 r02 card detected
2010/04/17 19:47:04 3107 s client(1) connect from 127.0.0.1 (pid=3119, pipfd=15)
2010/04/17 19:47:12 3118 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2010/04/17 19:47:13 3119 c01 encrypted newcamd:34000-client 127.0.0.1 granted (blady1, au=
hdplus)
2010/04/17 19:47:13 3119 c01 user blady1 authenticated successfully (using client 4343)
2010/04/17 19:47:13 3119 c01 AU wont be used on this port -> disable AU
2010/04/17 19:47:13 3119 c01 Connection closed to client
2010/04/17 19:47:13 3119 c01 blady1 disconnected from 127.0.0.1
2010/04/17 19:47:14 3118 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/04/17 19:47:17 3118 r02 detect native NAGRA card T1 protocol
2010/04/17 19:47:23 3107 s client(1) connect from 127.0.0.1 (pid=3197, pipfd=15)
2010/04/17 19:47:23 3197 c01 encrypted newcamd:34000-client 127.0.0.1 granted (blady1, au=
hdplus)
2010/04/17 19:47:23 3197 c01 user blady1 authenticated successfully (using client 4343)
2010/04/17 19:47:23 3197 c01 AU wont be used on this port -> disable AU
2010/04/17 19:47:29 3118 r02 card system not supported
2010/04/17 19:47:29 3118 r02 Normal mode failed, reverting to Deprecated Mode
2010/04/17 19:47:36 3118 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 34 63
2010/04/17 19:47:38 3118 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/04/17 19:47:40 3118 r02 detect native NAGRA card T1 protocol
2010/04/17 19:47:53 3118 r02 card system not supported
2010/04/17 19:47:53 3118 r02 card initializing error
2010/04/17 19:47:53 3107 s client(1) connect from 127.0.0.1 (pid=3201, pipfd=15)
2010/04/17 19:47:54 3201 c01 encrypted newcamd:34000-client 127.0.0.1 granted (blady1, au=
hdplus)
2010/04/17 19:47:54 3201 c01 user blady1 authenticated successfully (using client 4343)
2010/04/17 19:47:54 3201 c01 AU wont be used on this port -> disable AU