OSCam HD02 läuft leider nicht

[RvM]

Ich möchte gerne auch meine HD+ (HD02) über OSCam ans laufen bekommen, leider bekomme ich sie nicht initalisiert.
Hier meine Konfigdaten:

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
disableuserfile = 0
clienttimeout = 15000 # (für Kartenaktivierung evtl. Änderung des Wertes nötig)
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

[webif]
httpport = 8888
httpuser = xxx
httppwd = xxx
httprefresh = 30
httpallowed = 172.16.0.0-172.16.0.255

oscam.user: (sky läuft!)

Spoiler

[account]
user = local
pwd =
group = 1,2
au = skyS02,hdplus
betatunnel = 1833.FFFF:1702

oscam.server

Spoiler

[reader]
label = skyS02
enable = 1
protocol = internal
device = /dev/sci1
caid = 1702,1833
detect = cd
mhz = 368
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,1,2

[reader]
label = hdplus
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BF...D5
boxkey = A7...7C
detect = cd
ecmwhitelist = 1843:89
mhz = 368
cardmhz = 368
ident = 1843:000000,003411,008011
group = 2
emmcache = 1,3,2
auprovid = 003411

oscam.dvbapi

Spoiler

P: 1702
P: 1830
I:0

Und das spukt mit das Log nach einem Restart aus:

Spoiler

2014/09/01 20:04:17 C299A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/09/01 20:04:17 C299A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/01 20:04:17 C299A8 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/01 20:04:17 C299A8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 0104, date: 2008/10/04 - 2008/10/20
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 0406, date: 2008/01/19 - 2008/01/21
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 0105, date: 2008/10/04 - 2008/10/20
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 0004, date: 2008/01/19 - 2008/01/21
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 05F1, date: 2014/09/01 - 2014/10/24
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 05DE, date: 2014/09/01 - 2014/10/24
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 0276, date: 2014/09/01 - 2014/10/24
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 05F5, date: 2014/09/01 - 2014/10/24
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 05E7, date: 2014/09/01 - 2014/10/24
2014/09/01 20:04:17 C27AE8 r skyS02 [irdeto] chid: 05E8, date: 2014/09/01 - 2014/10/24
2014/09/01 20:04:18 C27AE8 r skyS02 [irdeto] ready for requests
2014/09/01 20:04:20 C299A8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/09/01 20:04:23 C299A8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/01 20:04:26 C299A8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/09/01 20:04:28 C299A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/09/01 20:04:28 C299A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/01 20:04:28 C299A8 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/01 20:04:28 C299A8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/09/01 20:04:30 C299A8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/09/01 20:04:30 C299A8 r hdplus [internal] card system not supported
2014/09/01 20:04:30 C299A8 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
2014/09/01 20:04:31 C299A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/09/01 20:04:31 C299A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/01 20:04:31 C299A8 r hdplus [internal] Calculated work ETU is 101.09 us reader mhz = 368
2014/09/01 20:04:31 C299A8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/09/01 20:04:33 C299A8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/09/01 20:04:34 C299A8 r hdplus [internal] detect native nagra card
2014/09/01 20:04:36 C299A8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/01 20:04:39 C299A8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/09/01 20:04:40 C299A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/09/01 20:04:40 C299A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/01 20:04:40 C299A8 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/01 20:04:40 C299A8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/09/01 20:04:42 C299A8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/09/01 20:04:45 C299A8 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/09/01 20:04:47 C299A8 r hdplus [internal] T1 Resync command error, trying to reactivate!
2014/09/01 20:04:48 C299A8 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/09/01 20:04:48 C299A8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/09/01 20:04:48 C299A8 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
2014/09/01 20:04:48 C299A8 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2014/09/01 20:04:50 C299A8 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
2014/09/01 20:04:50 C299A8 r hdplus [internal] card system not supported
2014/09/01 20:04:50 C299A8 r hdplus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/09/01 20:04:50 C299A8 r hdplus [internal] card initializing error
2014/09/01 20:04:51 0 s init for all local cards done
2014/09/01 20:04:51 0 s anti cascading disabled
2014/09/01 20:04:51 C35948 c plain dvbapi-client granted (local, au=on (2 reader))
2014/09/01 20:04:51 C35948 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/09/01 20:04:53 C35948 c Found 0 ECMpids and 7 STREAMpids in PMT
2014/09/01 20:04:53 C35948 c [DVBAPI] Receiver wants to demux srvid 6EA8 on adapter 0000 camask 0008 index 0003 pmtpid 159A
2014/09/01 20:04:53 C35948 c New program number: 6EA8 (FFFE:6EA8 unknown) [pmt_list_management 5]

 

[supraracer]

AW: OSCam HD02 läuft leider nicht

Nimm RSA & Boxkey aus dem Log, das verstößt gegen die Regeln hier um Forum.
Entferne mal die Leerstellen im RSA-Key und teste nochmal, bin nicht sicher ob die da drin sein dürfen.

-supraracer

 

[hgdo]

AW: OSCam HD02 läuft leider nicht

Lass oscam.dvbapi weg oder ergänze die HD+-Caid (P = 1843)

 

[Derek Buegel]

AW: OSCam HD02 läuft leider nicht

P: 1702
P: 1830
I:0

Das sollte 1843 heissen.

MfG

 

[easy1173]

AW: OSCam HD02 läuft leider nicht

Bei mir ging es erst, wo ich das Ident aus dem Reader raus getan habe.
Und bitte RSA und Boxkey raus tun. Nicht Erlaubt.

 

[RvM]

AW: OSCam HD02 läuft leider nicht

dvbapi entfernt, neugestartet-dunkel

Spoiler

• 2014/09/01 21:38:18 72F580 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/09/01 21:38:18 72F580 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/09/01 21:38:18 72F580 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/09/01 21:38:18 72F580 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
• 2014/09/01 21:38:19 72F580 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/09/01 21:38:21 72F580 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/09/01 21:38:23 72F580 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/09/01 21:38:24 72F580 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/09/01 21:38:24 72F580 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/09/01 21:38:24 72F580 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/09/01 21:38:24 72F580 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
• 2014/09/01 21:38:24 72F580 r hdplus [internal] Card responded ok for ifsd request of 160
• 2014/09/01 21:38:24 72F580 r hdplus [internal] card system not supported
• 2014/09/01 21:38:24 72F580 r hdplus [internal] Normal mode failed, reverting to Deprecated Mode
• 2014/09/01 21:38:26 72F580 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/09/01 21:38:26 72F580 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/09/01 21:38:26 72F580 r hdplus [internal] Calculated work ETU is 101.09 us reader mhz = 368
• 2014/09/01 21:38:26 72F580 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
• 2014/09/01 21:38:28 72F580 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/09/01 21:38:29 72F580 r hdplus [internal] detect native nagra card
• 2014/09/01 21:38:30 72F580 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/09/01 21:38:32 72F580 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/09/01 21:38:33 72F580 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/09/01 21:38:33 72F580 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/09/01 21:38:33 72F580 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/09/01 21:38:33 72F580 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
• 2014/09/01 21:38:35 72F580 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/09/01 21:38:37 72F580 r hdplus [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2014/09/01 21:38:38 72F580 r hdplus [internal] T1 Resync command error, trying to reactivate!
• 2014/09/01 21:38:40 72F580 r hdplus [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2014/09/01 21:38:40 72F580 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2014/09/01 21:38:40 72F580 r hdplus [internal] Calculated work ETU is 8.70 us reader mhz = 368
• 2014/09/01 21:38:40 72F580 r hdplus [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
• 2014/09/01 21:38:42 72F580 r hdplus [internal] Warning: Card returned error on setting ifsd value to 160
• 2014/09/01 21:38:42 72F580 r hdplus [internal] card system not supported
• 2014/09/01 21:38:42 72F580 r hdplus [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2014/09/01 21:38:42 72F580 r hdplus [internal] card initializing error
• 2014/09/01 21:38:42 0 s init for all local cards done
• 2014/09/01 21:38:42 0 s anti cascading disabled
• 2014/09/01 21:38:42 7346D8 c plain dvbapi-client granted (local, au=on (2 reader))
• 2014/09/01 21:38:42 7346D8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

P.S. In den keys waren keine Leerzeichen, nur direkt hinter dem "="

 

[Derek Buegel]

AW: OSCam HD02 läuft leider nicht

Trag mal autospeed ein

Spoiler

autospeed

Sie müssen registriert sein, um Links zu sehen.

Parameter ist optional
NEU svn9064:12/01/2013
autospeed = 0|1
1 = setzt den mhz-Wert anhand des ATR (default)
0 = disabled

MfG

 

[bombadil]

AW: OSCam HD02 läuft leider nicht

Hi,

ändere das mal wie im anderen Internen Reader

cardmhz = 368

Grüße
Bombadil

 

[RvM]

AW: OSCam HD02 läuft leider nicht

Das ist doch gesetzt!

 

[bombadil]

AW: OSCam HD02 läuft leider nicht

Du sollst es so ändern, wie beim Reader der S02.

Grüße
Bombadil

 

[Derek Buegel]

AW: OSCam HD02 läuft leider nicht

cardmhz = 2700

Schau in Deine eigenen Spoilern!

MfG

 

[RvM]

AW: OSCam HD02 läuft leider nicht

Spoiler

Trag mal autospeed ein

Spoiler

autospeed

Sie müssen registriert sein, um Links zu sehen.

Parameter ist optional
NEU svn9064:12/01/2013
autospeed = 0|1
1 = setzt den mhz-Wert anhand des ATR (default)
0 = disabled

MfG

Muss ich dann mhz und cardmhz entfernen?

 

[bombadil]

AW: OSCam HD02 läuft leider nicht

Hi,

ändere nicht alles gleichzeitig. Immer nur eine Änderung und schau dann ins Log.

Cardmhz stehen lassen, mhz wird automatisch gesetzt.

Grüße
Bombadil

 

[RvM]

AW: OSCam HD02 läuft leider nicht

Du sollst es so ändern, wie beim Reader der S02.

Grüße
Bombadil

Bringt auch nix :emoticon-0124-worri

 

[dodo83]

AW: OSCam HD02 läuft leider nicht

hast du das so stehen

[COLOR=#333333]mhz = 368[/COLOR]
[COLOR=#333333]cardmhz = 2700[/COLOR]

was sagt das log?
welche OScam Version läuft?