Oscam G09

[kaspriki]

AW: Oscam G09

So geht weiter hallo 4gx35 wo muss das hin "ipgigaortwebif"???

 

[4gx35]

AW: Oscam G09

in deinen internet browser, steht aber alles ausführlich in der anleitung,
besser noch einmal seiten 3-4 lesen, wie und was man mit dem webif alles machen kann

 

[kaspriki]

AW: Oscam G09

Das habe ich nun gefunden durch zwischen den Zeilen lesen. Meine GIGA sagt nun das.

2013/03/10 14:05:08 0 s ERROR: Cannot open file "/etc/tuxbox/config/oscam_Dmod/oscam.whitelist" (errno=2 No such file or directory)
2013/03/10 14:05:08 0 s ERROR: Cannot open file "/etc/tuxbox/config/oscam_Dmod/oscam.cacheex" (errno=2 No such file or directory)
2013/03/10 14:05:08 0 s Starting listener 0
2013/03/10 14:05:08 0 s monitor: disabled
2013/03/10 14:05:08 0 s Starting listener 0
2013/03/10 14:05:08 0 s camd35: disabled
2013/03/10 14:05:08 0 s Starting listener 0
2013/03/10 14:05:08 0 s cs378x: disabled
2013/03/10 14:05:08 0 s Starting listener 0
2013/03/10 14:05:08 0 s newcamd: disabled
2013/03/10 14:05:08 0 s Starting listener 0
2013/03/10 14:05:08 0 s cccam: initialized (fd=5, port=33333, crypted)
2013/03/10 14:05:08 0 s Starting listener 0
2013/03/10 14:05:08 0 s csp: disabled
2013/03/10 14:05:08 0 s starting thread http
2013/03/10 14:05:08 0 s http thread started
2013/03/10 14:05:08 0 s starting thread reader check
2013/03/10 14:05:08 0 s reader check thread started
2013/03/10 14:05:08 0 s starting thread check
2013/03/10 14:05:08 0 s check thread started
2013/03/10 14:05:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/10 14:05:08 0 s waiting for local card init
2013/03/10 14:05:08 5A5DA0 h HTTP Server listening on port 17000
2013/03/10 14:05:09 0 s init for all local cards done
2013/03/10 14:05:09 0 s anti cascading disabled
2013/03/10 14:05:09 5CFF40 c plain dvbapi-client granted (serverbox, au=on (4 reader))
2013/03/10 14:05:09 5CFF40 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2013/03/10 14:05:14 5CFF40 c dvbapi: [ADD PID 0] CAID: 1861 ECM_PID: 1AD1 PROVID: 000000
2013/03/10 14:05:14 5CFF40 c dvbapi: [ADD PID 1] CAID: 09C7 ECM_PID: 1AD5 PROVID: 000000
2013/03/10 14:05:14 5CFF40 c dvbapi: [ADD PID 2] CAID: 1834 ECM_PID: 1AD4 PROVID: 000000
2013/03/10 14:05:14 5CFF40 c dvbapi: Found 3 ECMpids and 3 STREAMpids in PMT
2013/03/10 14:05:14 5CFF40 c dvbapi: New program number: C356 (1861:C356 unknown) [pmt_list_management 3]
2013/03/10 14:05:14 5CFF40 c serverbox (1861&000000/0000/C356/89:C7A620E78618C64E8BF2E000FFB59333): rejected group (4 ms) (0/0/0/0) - 1861:C356 unknown (no matching reader)
2013/03/10 14:05:14 5CFF40 c serverbox (09C7&000000/0000/C356/60:E3A22CCD5F2456A899FF90B5E7FA4E46): rejected group (1 ms) (0/0/0/0) - 09C7:C356 unknown (no matching reader)
2013/03/10 14:05:14 5CFF40 c dvbapi: ERROR: Can't decode channel
2013/03/10 14:05:22 5CFF40 c dvbapi: [ADD PID 0] CAID: 1834 ECM_PID: 0350 PROVID: 000000
2013/03/10 14:05:22 5CFF40 c dvbapi: [ADD PID 1] CAID: 09C7 ECM_PID: 0351 PROVID: 000000
2013/03/10 14:05:22 5CFF40 c dvbapi: [ADD PID 2] CAID: 1722 ECM_PID: 034F PROVID: 000000
2013/03/10 14:05:22 5CFF40 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 034D PROVID: 000000
2013/03/10 14:05:22 5CFF40 c dvbapi: Found 4 ECMpids and 2 STREAMpids in PMT
2013/03/10 14:05:22 5CFF40 c dvbapi: New program number: C610 (1834:C610 unknown) [pmt_list_management 3]
2013/03/10 14:05:23 5CFF40 c serverbox (1861&000000/0000/C610/89:978C74731A63DA60C2CDF163E17AF9EA): rejected group (1 ms) (0/0/0/0) - 1861:C610 unknown (no matching reader)
2013/03/10 14:05:23 5CFF40 c serverbox (1834&000000/0000/C610/89:CD7AD35FAC04EEF91E7676BA9CD1F297): rejected group (1 ms) (0/0/0/0) - 1834:C610 unknown (no matching reader)
2013/03/10 14:05:24 0 --- Skipped 1 duplicated log lines ---
2013/03/10 14:05:24 5CFF40 c dvbapi: ERROR: Can't decode channel

 

[bombadil]

AW: Oscam G09

Hi,

oscam läuft, liest aber die G09 Smartcard nicht ein. Poste doch bitte deine aktuelle Oscam.server.

Viele Grüße
Bombadil

 

[kaspriki]

AW: Oscam G09

Das hier oder?

[reader]
label = s02
description = S02-Sat
enable = 0
protocol = internal
device = /dev/sci0
services = sky_s02
caid = 1702,1833
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2

[reader]
label = hd01
description = HD+weiss
enable = 0
protocol = internal
device = /dev/sci1
services = hd01
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2

[reader]
label = hd02
description = HD+schwarz
enable = 0
protocol = internal
device = /dev/sci1
services = hd02
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2

[reader]
label = v13
description = V13-Sky
enable = 0
protocol = internal
device = /dev/sci0
services = sky_v13,v13hdplus
caid = 09C4
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
ndsversion = 2

[reader]
label = v14
description = V14-Sky
enable = 0
protocol = internal
device = /dev/sci0
services = sky_v14,v14hdplus
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
ndsversion = 2

[reader]
label = orfice
description = ORF-Ice
enable = 0
protocol = internal
device = /dev/sci1
services = orfice,kombiaustria
caid = 0648
boxid = 12345678
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
force_irdeto = 1
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,1,2

[reader]
label = i12
description = i12-Unitymedia
enable = 0
protocol = internal
device = /dev/sci0
services = sky_i12
caid = 1722,1835
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2

[reader]
label = um02
description = um02-Unitymedia
enable = 0
protocol = internal
device = /dev/sci1
caid = 1838
rsakey = B55E0EB0562805F1788BDA0CD8B856BF696CFF1CBF4ED62B85E643F385B0F8899275DEA669AC77BDA43A20CCB844A3AF5A2BE0622779FAB153D156957DF367FF
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2

[reader]
label = d02
description = D02-KD
enable = 0
protocol = internal
device = /dev/sci0
services = sky_d02
caid = 1722,1834
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2

[reader]
label = d09
description = D09-KD
enable = 0
protocol = internal
device = /dev/sci1
services = sky_d09
caid = 1834
rsakey = 8A54468867159C1188D13ACE7DF348FA08BDF8BE33F1B2F72F74FBCD184C825519E517E3494A6DD8CF046630456111F952979DECCFF5176D890AE93F4E267711
boxkey = 6660A9AE55A4847B
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2

[reader]
label = g0209
description = G02G09-KD
enable = 0
protocol = internal
device = /dev/sci0
services = sky_g0209
caid = 09C7
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
ndsversion = 2

[reader]
label = partner_c-line
description = c-line_vom_sharepartner
enable = 0
protocol = cccam
device = dyndns,12345
user = c-line-user
password = c-line-pass
inactivitytimeout = 0
group = 2
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1

[reader]
label = keyserver
description = camd-keyserver
enable = 0
protocol = camd35
device = 127.0.0.1,44444
user = server
password = server
caid = 0D05
group = 2

 

[bombadil]

AW: Oscam G09

Hi,

du hast alle Reader deaktiviert.

enable = 0

dann kann kein Reader eingelesen werden.
mit

enable = 1

wird er aktiviert.

Kopiere mal diese oscam.server und bennene sie z.B. oscam.server_old

Dann löscht du alles aus der Datei bis auf

[reader]
label                         = g09
description                   = G09-KD
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
services                      = 
caid                          = 09C7
boxid                         = 12345678
detect                        = cd
mhz                           = 357
cardmhz                       = 357
group                         = 1
emmcache                      = 1,1,2

und startest deine Oscam neu. Alle anderen Parameter bearbeiten wir, wenn die Karte gelesen wird.

Grüße
Bombadil

 

[kaspriki]

AW: Oscam G09

Ok ich mach das mal

 

[kaspriki]

AW: Oscam G09

So das sieht besser aus.

2013/03/10 14:44:06 0 s Starting listener 0
2013/03/10 14:44:06 0 s newcamd: disabled
2013/03/10 14:44:06 0 s Starting listener 0
2013/03/10 14:44:06 0 s cccam: initialized (fd=5, port=33333, crypted)
2013/03/10 14:44:06 0 s Starting listener 0
2013/03/10 14:44:06 0 s csp: disabled
2013/03/10 14:44:06 0 s starting thread http
2013/03/10 14:44:06 0 s http thread started
2013/03/10 14:44:06 0 s starting thread reader check
2013/03/10 14:44:06 0 s reader check thread started
2013/03/10 14:44:06 0 s starting thread check
2013/03/10 14:44:06 0 s check thread started
2013/03/10 14:44:06 0 s g09 [internal] creating thread for device /dev/sci0
2013/03/10 14:44:06 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/03/10 14:44:06 0 s waiting for local card init
2013/03/10 14:44:06 584438 r g09 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/03/10 14:44:06 5B7CA0 h HTTP Server listening on port 17000
2013/03/10 14:44:07 584438 r g09 [internal] card detected
2013/03/10 14:44:07 584438 r g09 [internal] ATR: 78 F0 48 21 81 00
2013/03/10 14:44:07 584438 r g09 [internal] ERROR: Could not read reader->convention
2013/03/10 14:44:07 584438 r g09 [internal] Error activating card.
2013/03/10 14:44:07 584438 r g09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2013/03/10 14:44:07 584438 r g09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2013/03/10 14:44:07 584438 r g09 [internal] Setting baudrate to 9600 bps
2013/03/10 14:44:07 584438 r g09 [internal] Calculated work ETU is 74.40 us
2013/03/10 14:44:08 584438 r g09 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/03/10 14:44:09 584438 r g09 [internal] Card type: KLPV
2013/03/10 14:44:09 584438 r g09 [internal] Rom version: 10LM
2013/03/10 14:44:10 584438 r g09 [internal] parental lock setting: FF FF FF FF
2013/03/10 14:44:10 584438 r g09 [internal] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2013/03/10 14:44:10 584438 r g09 [internal] serial: ########, BoxID: ########, baseyear: 2004
2013/03/10 14:44:10 584438 r g09 [internal] ready for requests
2013/03/10 14:44:10 584438 r g09 [internal] found card system videoguard2
2013/03/10 14:44:10 584438 r g09 [videoguard2] card detected
2013/03/10 14:44:10 584438 r g09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2013/03/10 14:44:10 584438 r g09 [videoguard2] tier: 571b, expiry date: 2011/06/04-01:01:04
2013/03/10 14:44:10 584438 r g09 [videoguard2] tier: 00f3, expiry date: 2013/05/02-01:00:00
2013/03/10 14:44:10 584438 r g09 [videoguard2] tier: 00f4, expiry date: 2013/05/02-01:00:00
2013/03/10 14:44:10 584438 r g09 [videoguard2] tier: 00fa, expiry date: 2013/05/02-01:00:00
2013/03/10 14:44:10 584438 r g09 [videoguard2] tier: 00fe, expiry date: 2013/05/02-01:00:00
2013/03/10 14:44:11 584438 r g09 [videoguard2] tier: 0101, expiry date: 2013/06/04-01:00:00
2013/03/10 14:44:11 584438 r g09 [videoguard2] tier: 0131, expiry date: 2013/06/04-01:00:00
2013/03/10 14:44:11 584438 r g09 [videoguard2] tier: 0133, expiry date: 2013/06/04-01:00:00
2013/03/10 14:44:23 0 s init for all local cards done
2013/03/10 14:44:23 0 s anti cascading disabled
2013/03/10 14:44:23 5BA308 c plain dvbapi-client granted (serverbox, au=off)
2013/03/10 14:44:23 5BA308 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2013/03/10 14:44:26 5BA308 c dvbapi: Found 0 ECMpids and 7 STREAMpids in PMT
2013/03/10 14:44:26 5BA308 c dvbapi: New program number: 2B70 (0000:2B70 unknown) [pmt_list_management 3]

 

[bombadil]

AW: Oscam G09

Hi,

hast du ein Bild?

Gruß
Bombadil

 

[4gx35]

AW: Oscam G09

und du hast garantiert die anleitung zu den easy configs nicht gelesen,
sonst gäbe es nicht mehr so viele reader in oscam.server
nur kopieren reicht eben nicht !!!

 

[kaspriki]

AW: Oscam G09

Zwischen lesen und verstehen sind Welten sorry.

@Bombadil leider nicht

 

[bombadil]

AW: Oscam G09

Hi,

dann lass uns mal überlegen, wo es hakt. Beantworte mir bitte diese Fragen.

1. Was ist dein Server (PC, Fritzbox, Receiver)
2. Falls Receiver, welcher und du willst auch damit schauen.
3. Bitte dann auch noch die aktuelle oscam.conf und oscam.user in Spoilern posten.

Gruß
Bombadil

 

[kaspriki]

AW: Oscam G09

zu 1. der Server müsste ja dann der Receiver sein.

zu 2. GIGABLUE 800 HD UE

zu 3. oscam.conf

Spoiler

[global]
logfile = /var/log/oscam.log
maxlogsize = 200
nice = -1
preferlocalcards = 1
fallbacktimeout = 2500


# NEU ab oscam #8358
[cache]
delay = 120

[cccam]
port = 33333
version = 2.3.0
reshare = 1
ignorereshare = 0

[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox

[webif]
httpport = 17000
httpuser =
httppwd =
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-192.168.255.255
aulow = 120
appendchaninfo = 1

oscam.user

Spoiler

[account]
user = serverbox
keepalive = 1
au = i12,s02,hd01,v13
betatunnel = 1835.FFFF:1722
group = 1,2
cccignorereshare = 0

[account]
user = client1
pwd = pass1
uniq = 3
keepalive = 1
betatunnel = 1835.FFFF:1722
group = 1,2
cccreshare = 0
cccignorereshare = 0

[account]
user = client2
pwd = pass2
uniq = 3
keepalive = 1
betatunnel = 1835.FFFF:1722
group = 1,2
cccreshare = 0
cccignorereshare = 0

 

[bombadil]

AW: Oscam G09

Hi,

ändere bitte den User für dvbapi so

[account]
user                          = serverbox
keepalive                     = 1
au                            = g09
group                         = 1
cccignorereshare              = 0

Den Betatunnel brauchst du nicht, die Karte mit 09C7 lässt sich nicht tunneln.

Gruß
Bombadil

 

[kaspriki]

AW: Oscam G09

Er kann mit der Karte so recht nix Anfangen

Spoiler

2013/03/10 15:45:04 584408 r g09 [internal] Calculated work ETU is 74.40 us
2013/03/10 15:45:05 584408 r g09 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2013/03/10 15:45:06 584408 r g09 [internal] Card type: KLPV
2013/03/10 15:45:06 584408 r g09 [internal] Rom version: 10LM
2013/03/10 15:45:07 584408 r g09 [internal] parental lock setting: FF FF FF FF
2013/03/10 15:45:07 584408 r g09 [internal] type: VideoGuard Kabel Deutschland G02/G09 (09C7), caid: 09C7
2013/03/10 15:45:07 584408 r g09 [internal] serial: ########, BoxID: ########, baseyear: 2004
2013/03/10 15:45:07 584408 r g09 [internal] ready for requests
2013/03/10 15:45:07 584408 r g09 [internal] found card system videoguard2
2013/03/10 15:45:07 584408 r g09 [videoguard2] card detected
2013/03/10 15:45:07 584408 r g09 [videoguard2] type: VideoGuard Kabel Deutschland G02/G09 (09C7)
2013/03/10 15:45:07 584408 r g09 [videoguard2] tier: 571b, expiry date: 2011/06/04-01:01:04
2013/03/10 15:45:07 584408 r g09 [videoguard2] tier: 00f3, expiry date: 2013/05/02-01:00:00
2013/03/10 15:45:07 584408 r g09 [videoguard2] tier: 00f4, expiry date: 2013/05/02-01:00:00
2013/03/10 15:45:07 584408 r g09 [videoguard2] tier: 00fa, expiry date: 2013/05/02-01:00:00
2013/03/10 15:45:07 584408 r g09 [videoguard2] tier: 00fe, expiry date: 2013/05/02-01:00:00
2013/03/10 15:45:07 584408 r g09 [videoguard2] tier: 0101, expiry date: 2013/06/04-01:00:00
2013/03/10 15:45:07 584408 r g09 [videoguard2] tier: 0131, expiry date: 2013/06/04-01:00:00
2013/03/10 15:45:07 584408 r g09 [videoguard2] tier: 0133, expiry date: 2013/06/04-01:00:00
2013/03/10 15:45:13 0 s init for all local cards done
2013/03/10 15:45:13 0 s anti cascading disabled
2013/03/10 15:45:13 5BA2D0 c plain dvbapi-client granted (serverbox, au=on (1 reader))
2013/03/10 15:45:13 5BA2D0 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2013/03/10 15:45:13 5BA2D0 c dvbapi: [ADD PID 0] CAID: 1861 ECM_PID: 1AD1 PROVID: 000000
2013/03/10 15:45:13 5BA2D0 c dvbapi: [ADD PID 1] CAID: 09C7 ECM_PID: 1AD5 PROVID: 000000
2013/03/10 15:45:13 5BA2D0 c dvbapi: [ADD PID 2] CAID: 1834 ECM_PID: 1AD4 PROVID: 000000
2013/03/10 15:45:13 5BA2D0 c dvbapi: Found 3 ECMpids and 3 STREAMpids in PMT
2013/03/10 15:45:13 5BA2D0 c dvbapi: New program number: C356 (1861:C356 unknown) [pmt_list_management 3]
2013/03/10 15:45:18 5BA2D0 c serverbox (09C7&000000/0000/C356/60:0A9D317D608C2677B52605575A16E355): timeout (5001 ms) by g09 - 09C7:C356 unknown
2013/03/10 15:45:19 5BA2D0 c dvbapi: ERROR: Can't decode channel
2013/03/10 15:45:32 584408 r g09 [videoguard2] classD0 ins40: (-2) status not ok 88 2d
2013/03/10 15:45:32 584408 r g09 [videoguard2] The card is not answering correctly! Restarting reader for safety
2013/03/10 15:45:32 584408 r dropping client data for g09 time 16s
2013/03/10 15:45:35 584408 r g09 [videoguard2] creating thread for device /dev/sci0
2013/03/10 15:45:35 5BCEF8 r g09 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2013/03/10 15:45:40 5BCEF8 r g09 [videoguard2] card detected
2013/03/10 15:45:40 5BCEF8 r g09 [internal] ATR: FD 01 05
2013/03/10 15:45:40 5BCEF8 r g09 [internal] ERROR: Could not read reader->convention
2013/03/10 15:45:40 5BCEF8 r g09 [internal] Error activating card.
2013/03/10 15:45:40 5BCEF8 r g09 [internal] ATR: 78 F0 48 21 81 00
2013/03/10 15:45:40 5BCEF8 r g09 [internal] ERROR: Could not read reader->convention
2013/03/10 15:45:40 5BCEF8 r g09 [internal] Error activating card.
2013/03/10 15:45:49 5BCEF8 r Warning reader g09: ATR is invalid!
2013/03/10 15:45:49 5BCEF8 r g09 [internal] Error activating card.
2013/03/10 15:45:50 5BCEF8 r g09 [internal] card initializing error