Dragofolio
Newbie
- Registriert
- 11. Oktober 2012
- Beiträge
- 14
- Reaktionspunkte
- 0
- Punkte
- 21
Hallo,
ich besitze die freetz-devel-9350M mit OSCAM 1.20 -rolu2- build 7963 allerdings erkennt es die Karte nicht.
oscam.server
Smartmouse einstellung
3,3V | PHOENIX | 3,579Mhz
Wie kann man das Problem lösen ?
ich besitze die freetz-devel-9350M mit OSCAM 1.20 -rolu2- build 7963 allerdings erkennt es die Karte nicht.
2013/04/26 22:42:51 5D91C0 h HTTP Server listening on port xxxxx
2013/04/26 22:42:51 5D79B0 r phoenix [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2013/04/26 22:42:52 5D79B0 r phoenix [mouse] card detected
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] Setting baudrate to 9600 bps
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] Calculated work ETU is 104.20 us
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/04/26 22:42:54 5D79B0 r phoenix [mouse] card system not supported
2013/04/26 22:42:54 5D79B0 r phoenix [mouse] Normal mode failed, reverting to Deprecated Mode
2013/04/26 22:42:55 5D79B0 r phoenix [mouse] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/04/26 22:42:55 5D79B0 r phoenix [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/04/26 22:42:55 5D79B0 r phoenix [mouse] Calculated work ETU is 104.20 us
2013/04/26 22:42:55 5D79B0 r phoenix [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/04/26 22:42:56 5D79B0 r phoenix [mouse] card system not supported
2013/04/26 22:42:56 5D79B0 r phoenix [mouse] card initializing error
2013/04/26 22:42:57 0 s init for all local cards done
2013/04/26 22:42:57 0 s anti cascading disabled
2013/04/26 22:42:51 5D79B0 r phoenix [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2013/04/26 22:42:52 5D79B0 r phoenix [mouse] card detected
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] Setting baudrate to 9600 bps
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] Calculated work ETU is 104.20 us
2013/04/26 22:42:53 5D79B0 r phoenix [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/04/26 22:42:54 5D79B0 r phoenix [mouse] card system not supported
2013/04/26 22:42:54 5D79B0 r phoenix [mouse] Normal mode failed, reverting to Deprecated Mode
2013/04/26 22:42:55 5D79B0 r phoenix [mouse] ATR: xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/04/26 22:42:55 5D79B0 r phoenix [mouse] Init card protocol T0, FI=1, F=372, D=1, N=3
2013/04/26 22:42:55 5D79B0 r phoenix [mouse] Calculated work ETU is 104.20 us
2013/04/26 22:42:55 5D79B0 r phoenix [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/04/26 22:42:56 5D79B0 r phoenix [mouse] card system not supported
2013/04/26 22:42:56 5D79B0 r phoenix [mouse] card initializing error
2013/04/26 22:42:57 0 s init for all local cards done
2013/04/26 22:42:57 0 s anti cascading disabled
oscam.server
[reader]
label = phoenix
enable = 1
protocol = mouse
device = /dev/ttyUSB0
group = 1
caid = 09C4
ins7e11 = 11
emmcache = 1,3,2
ident = 09C4:000000
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
device_out_endpoint = 0x82
ndsversion = 2
label = phoenix
enable = 1
protocol = mouse
device = /dev/ttyUSB0
group = 1
caid = 09C4
ins7e11 = 11
emmcache = 1,3,2
ident = 09C4:000000
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
device_out_endpoint = 0x82
ndsversion = 2
Smartmouse einstellung
3,3V | PHOENIX | 3,579Mhz
Wie kann man das Problem lösen ?