Oscam CCcam Newcamd Mgcamd HILFE!

#---Oscam Config ---
#####################################
#####################################
[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
saveinithistory = 1
LogFile = syslog
#clientTimeout = 5
#clientMaxIdle = 120
#cacheDelay = 20
#####################################
#####################################
[webif]
httpPort = XXXX
httpUser = XXXX
httpPWD = XXXX
httpRefresh = 10
httpAllowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpReadOnly = 1
#####################################
#####################################
[newcamd]
key = 0102030405060708091011121314
port = XXXX@1843:003411;XXXX@1702:000000
keepalive = 1
mgclient = 0

#---Oscam Server---
##############################################
##############################################

#************HDPlus************
[reader]
Label = HDplus
enable = 1
Protocol = internal
Device = /dev/sci0
Detect = CD
Mhz = 368
cardmhz = 368
Group = 1
CAID = 1843
rsakey = BF...D5
boxkey = A7...7C
EMMCache = 1,3,2
##############################################
##############################################

#************SKYdeu************
#[reader]
#Label = SkyDE
#enable = 0
#Protocol = internal
#Device = /dev/sci1
#Detect = CD
#Group = 1
#Mhz = 600
#cardmhz = 600
#CAID = 1702
#EMMCache = 1,3,2

#---Oscam User---
##############################################
##############################################
[account]
user = lokal
pwd = lokal
enable = 1
au = 1
Group = 1
##############################################
##############################################
[account]
user = GM990
pwd = golden
enable = 1
au = 1
Group = 1

# USER SERVER #
######################################################################

F: GM990 golden 2 0 1 { 0:0:2 } {} {}

######################################################################
# SERVER Lokal #
######################################################################

N: 127.0.0.1 XXXX lokal lokal 01 02 03 04 05 06 07 08 09 10 11 12 13 14

######################################################################
# Private Einstellungen #
######################################################################

SHOW TIMING : yes
ALLOW WEBINFO: yes
SHOW TIMING : yes
DEBUG : yes

SHOW EXTENEDED CLIENT INFO : yes

SERVER LISTEN PORT : XXXXXX
EXTRA EMM LEVEL : yes

######################################################################

#
# MgCamd 1.35 configuration file ( cccam netclient )
# CCcam 2.1.3 servers list in the file cccamd.list
#
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 00 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccam netclient
# 33 means CCcam or NewCamd client
# (ECM only, supported server version up to 2.1.1, later not work)

G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 04 } 5 5

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root newcs

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 02 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2/alien NewCamd client
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 11 ipbox/pingulux/alien CCcam client
# 12 Fortis
B: { 00 }

# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
# W: { }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = XXXX <- welcher Port kommt hier rein?

CWS = N: 192.168.XXX.XXX XXXX GM990 golden 01 02 03 04 05 06 07 08 09 10 11 12 13 14 LAN