OSCam auf Client läuft nicht

[Coachi]

Hallo zusammen,

ich verwende einen Xtrend 9200 als Clinet und habe dort nun neben CCCam noch OSCam installiert (1.20-unstable_svn build r8608).
In den Logs bekomme ich jedoch folgenden Error:

Spoiler

2016/02/20 22:09:03 4FB078 c New program number: 0083 (Sky Cinema HD) [pmt_list_management 3]
2016/02/20 22:09:03 4FB078 c local (09C4&000000/0000/0083/B3:75CD875F31D64BCAF8FFB086A7F32353): rejected group (1 ms) (0/0/0/0) - Sky Cinema HD (no matching reader)
2016/02/20 22:09:04 4FB078 c local (09AF&000000/0000/0083/92:3B6CA3AFA01E998D9DD68D22726A4E45): rejected group (0 ms) (0/0/0/0) (no matching reader)
2016/02/20 22:09:04 4FB078 c local (098C&000000/0000/0083/98:52039087DCD56595295BAAD48003CAC2): rejected group (0 ms) (0/0/0/0) (no matching reader)
2016/02/20 22:09:04 4FB078 c local (09C4&000000/0000/0083/B3:75CD875F31D64BCAF8FFB086A7F32353): rejected group (1 ms) (0/0/0/0) - Sky Cinema HD (no matching reader)
2016/02/20 22:09:04 4FB078 c local (09AF&000000/0000/0083/92:3B6CA3AFA01E998D9DD68D22726A4E45): rejected group (0 ms) (0/0/0/0) (no matching reader)
2016/02/20 22:09:05 4FB078 c local (098C&000000/0000/0083/98:52039087DCD56595295BAAD48003CAC2): rejected group (0 ms) (0/0/0/0) (no matching reader)
2016/02/20 22:09:05 4FB078 c local (09C4&000000/0000/0083/B3:75CD875F31D64BCAF8FFB086A7F32353): rejected group (1 ms) (0/0/0/0) - Sky Cinema HD (no matching reader)
2016/02/20 22:09:05 4FB078 c local (09AF&000000/0000/0083/92:3B6CA3AFA01E998D9DD68D22726A4E45): rejected group (1 ms) (0/0/0/0) (no matching reader)
2016/02/20 22:09:05 4FB078 c ERROR: Can't decode channel
2016/02/20 22:09:05 4FB078 c local (098C&000000/0000/0083/98:52039087DCD56595295BAAD48003CAC2): rejected group (0 ms) (0/0/0/0) (no matching reader)

Meine Configs:
oscam.config

Spoiler

[global]
logfile = /var/log/oscam.log

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = et9x00

[webif]
httpport = 83
httpuser = oscam
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

oscam.user

Spoiler

[account]
user = local
au = 1
group = 1

oscam.server

Spoiler

[reader]
label = Remote-OScam
protocol = cs378x
device = 192.168.1.122,12345
user = xxx
password = xxx
reconnecttimeout = 60
keepalive = 1
group = 1

Kann mir bitte jemand weiterhelfen?

 

[webman2]

AW: OSCam auf Client läuft nicht

Das Oscam ist leider zu alt, Du brauchst eine Version ab SVN9848.

Desweiteren hast Du in der oscam.conf das CS-Protokoll gar nicht eingetragen:

[cs378x]
port = 12345

Den boxtype = et9x00 gibt es gar nicht.
boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt||qboxhd|coolstream|neumo|pc

 

[lorenz]

AW: OSCam auf Client läuft nicht

Genau! Als Boxtype verwendest Du "dreambox"! Ein Newcamd-Server hast Du doch nicht, oder? Dann kannst du den keepalive Eintrag auch gleich rausschmeissen! Merke: Je besser Du die config der oscam pflegst und sie von unnötigen Einträgen befreist, desto stabiler läuft sie.

Habe auf all meinen drei Xtrend die oscam absolut problemlos am laufen!

 

[Coachi]

AW: OSCam auf Client läuft nicht

Was müsste ich denn als Boxtype eintragen, wenn ich einen ET9200 mit OpenATV verwende?

Wo bekomme ich eine aktuelle OSCam als .ipk Datei her?

 

[lorenz]

AW: OSCam auf Client läuft nicht

Siehe meinen letzten Post! Hat sich wohl mit Deiner Frage überschnitten! Entweder schaust Du im Download-Bereich oder wartest bis morgen mittag! Da bin ich dann wieder zu Hause und kann Dir eine aktuelle Oscam kompilieren!

 

[webman2]

AW: OSCam auf Client läuft nicht

Schau doch mal im feed nach einer aktuelleren Oscam-Version.

 

[Coachi]

AW: OSCam auf Client läuft nicht

Hab nun folgende installiert:
1.20-unstable_svn, build r10077

Allerdings scheint immernoch irgendwas nicht zu stimmen.

Spoiler

2016/02/20 23:14:23 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10077 (mipsel-unknown-linux-gnu)
2016/02/20 23:14:23 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 29400
2016/02/20 23:14:23 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2016/02/20 23:14:23 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/02/20 23:14:23 0 s signal handling initialized
2016/02/20 23:14:23 0 s 943 service-id's loaded in 18 ms
2016/02/20 23:14:23 0 s cs378x: initialized (fd=5, port=12345)
2016/02/20 23:14:23 0 s Remote-OScam [cs378x] creating thread for device 192.168.1.122
2016/02/20 23:14:23 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2016/02/20 23:14:23 0 s waiting for local card init
2016/02/20 23:14:23 5539B0 p cs378x proxy 192.168.1.122:12345
2016/02/20 23:14:23 5539B0 p Remote-OScam [cs378x] proxy initialized, server 192.168.1.122:12345
2016/02/20 23:14:23 77600468 h webif: decompressed 150424 bytes back into 360152 bytes
2016/02/20 23:14:23 77600468 h HTTP Server running. ip=0.0.0.0 port=83
2016/02/20 23:14:24 0 s init for all local cards done
2016/02/20 23:14:24 0 s anti cascading disabled
2016/02/20 23:14:24 5558F0 c plain dvbapi-client granted (local, au=auto (1 reader))
2016/02/20 23:14:24 5558F0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2016/02/20 23:14:24 5558F0 c [NEW ECMPID #0] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2016/02/20 23:14:24 5558F0 c [NEW ECMPID #1] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2016/02/20 23:14:24 5558F0 c [NEW ECMPID #2] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2016/02/20 23:14:24 5558F0 c Found 3 ECMpids and 4 STREAMpids in PMT
2016/02/20 23:14:24 5558F0 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0001 index 0000 pmtpid 0064
2016/02/20 23:14:24 5558F0 c New program number: 0083 (09C4:0083 unknown) [pmt_list_management 3]
2016/02/20 23:14:24 5558F0 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 09C4 PROVID 000000 ECMPID 1BB6 ANY CHID PMTPID 0064 VPID 04FF
2016/02/20 23:14:24 5539B0 p 192.168.1.122: resolved ip=192.168.1.122
2016/02/20 23:14:24 5539B0 p Remote-OScam [cs378x] connecting to 192.168.1.122:12345
2016/02/20 23:14:27 5539B0 p Remote-OScam [cs378x] connect failed: Connection timed out
2016/02/20 23:14:27 5558F0 c local (09C4&000000/025B/0083/B3A1C1FE46C2914C2DAEDE0C53D7ACDE2): not found (3008 ms) by Remote-OScam
2016/02/20 23:14:28 5558F0 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 09AF PROVID 000000 ECMPID 1FB6 ANY CHID PMTPID 0064 VPID 04FF
2016/02/20 23:14:29 5539B0 p Remote-OScam [cs378x] connecting to 192.168.1.122:12345
2016/02/20 23:14:30 5539B0 p Remote-OScam [cs378x] connect failed: Connection timed out
2016/02/20 23:14:30 5558F0 c local (09AF&000000/025B/0083/92:F8BB4998A94A26D04045CA3B5B0083E7): not found (1329 ms) by Remote-OScam
2016/02/20 23:14:30 5558F0 c local (09AF&000000/025B/0083/92:B84655E6050D32581AECB67C3E1C395D): not found (120 ms) by Remote-OScam
2016/02/20 23:14:30 5558F0 c [DVBAPI] Demuxer #0 trying to descramble PID #2 CAID 098C PROVID 000000 ECMPID 1AB6 ANY CHID PMTPID 0064 VPID 04FF
2016/02/20 23:14:30 5539B0 p Remote-OScam [cs378x] connecting to 192.168.1.122:12345

 

[webman2]

AW: OSCam auf Client läuft nicht

Der Client kann sich nicht am Server connecten ...

2016/02/20 23:14:29 5539B0 p Remote-OScam [cs378x] connecting to 192.168.1.122:12345
2016/02/20 23:14:30 5539B0 p Remote-OScam [cs378x] connect failed: Connection timed out

Hast Du die oscam.conf ergänzt ?

 

[Coachi]

AW: OSCam auf Client läuft nicht

Ja, die oscam.conf sieht nun so aus:

Spoiler

[global]
logfile = /var/log/oscam.log

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 83
httpuser = oscam
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

[cs378x]
port = 12345

Muss ich evtl. auf dem Server noch etwas an den OSCam Files ändern?
Auf dem Client habe ich nun CCCam 2.30 als Cam1 und OSCam svn10077 als Cam2 laufen.

 

[webman2]

AW: OSCam auf Client läuft nicht

Also sorry - entweder cs387x oder CCcam .. dass musst Du dann in der oscam.conf und oscam.server dann auch so konfigurieren.

oscam.server

Spoiler

[reader]
label = Remote-OScam
protocol = cccam
device = 192.168.1.122,12345
user = xxx
password = xxx
reconnecttimeout = 60
ccckeepalive = 1
cccversion = 2.3.0
group = 1

oscam.conf

Spoiler

[cccam]
port = 12345
version = 2.3.0

 

[Coachi]

AW: OSCam auf Client läuft nicht

Mmh, das bedeutet?
Aktuell sehen die so aus:
oscam.conf

Spoiler

[global]
disablelog = 0
loghistorysize = 4096
serverip = 0.0.0.0
logfile = /var/log/ipc/OScam.log
initial_debuglevel = 0
sysloghost =
syslogport = 514
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir = /var/log/ipc/
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_reopen_invalid = 1
lb_force_reopen_always = 0
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheex_mode1_delay =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
csp_block_fakecws = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[cs378x]
port = 12345
serverip = 0.0.0.0
suppresscmd08 = 0

[newcamd]
port = 22000@1830:003411
serverip = 0.0.0.0
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 0

[cccam]
port = 12345
serverip = 0.0.0.0
nodeid = 5526F84610771474
version = 2.3.0
reshare = 10
reshare_mode = 4
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

[webif]
httpport = 16000
serverip = 0.0.0.0
httpuser = xxx
httppwd = xxx
httpcss =
httpjscript =
httpscript =
httptpl =
httppiconpath =
httphelplang = de
httplocale =
http_prepend_embedded_css = 0
httprefresh = 10
httppollrefresh = 60
httphideidleclients = 0
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 0
httpshowuserinfo = 0
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,0.0.0.0-255.255.255.255
httpreadonly = 0
httpsavefullcfg = 1
httpoverwritebakfile = 0
httpcert =
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = OSCam
httpemmuclean = 256
httpemmsclean = -1
httpemmgclean = -1
http_status_log = 0

Oscam.server:

Spoiler

[reader]
label = V14
description =
enable = 1
protocol = smartreader
device = Serial:smargoRB
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid = 098C
atr =
boxid = 12345678
boxkey =
rsakey =
deskey =
ins7e =
ins7e11 = 15
ins2e06 =
fix07 = 1
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 534
cardmhz = 369
ident =
chid =
class =
aeskeys =
group = 10
emmcache = 0,0,0,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 0
saveemm-u = 1
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 1

[reader]
label = HD+
description =
enable = 0
protocol = mouse
device = /dev/ttyUSB8
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid =
atr =
boxid =
boxkey =
rsakey =
deskey =
ins7e =
ins7e11 =
ins2e06 =
fix07 = 1
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 1

[reader]
label = camd3emu
description =
enable = 0
protocol = cs357x
device = 127.0.0.1,20248,0
key =
user = XXX
password = XXX
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 0
cccam_reshare = 5
services =
lb_whitelist_services =
inactivitytimeout = 0
reconnecttimeout = 30
reconnectdelay = 60000
keepalive = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
cacheex_block_fakecws = 0
caid =
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 0,1,0,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
audisabled = 0
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

 

[webman2]

AW: OSCam auf Client läuft nicht

Sieht schrecklich aus.

Lösche doch erstmal alle die Einträge, die nicht gebraucht werden .. siehe mein post vorher.

 

[Coachi]

Mit CCCam läuft ja alles bestens.
Wollte nun aber meinen Client auf OSCam umstelllen, weil ich mit CCCam nur jede Woche mal ein EMM rein bekomme.

Ich kann doch auf den Server nicht nur die paar Einträge in den Configs schreiben.
Was denn mit den V14 Reader und so???

 

[webman2]

AW: OSCam auf Client läuft nicht

Also gut .. für den client:

oscam.conf

Spoiler

[global]
logfile = /var/log/ipc/OScam.log
nice = -1
maxlogsize = 1500
preferlocalcards = 1

[cache]

[cccam]
port = 12345
nodeid = 5526F84610771474
version = 2.3.0
stealth = 1

[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox

[webif]
httpport = 16000
httpuser = xxx
httppwd = xxx
httphelplang = de
httprefresh = 10
httpshowecminfo = 1
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 15

oscam.server

Spoiler

[reader]
label = Remote-OScam
protocol = cccam
device = 192.168.1.122,12345
user = xxx
password = xxx
reconnecttimeout = 60
ccckeepalive = 1
cccversion = 2.3.0
group = 1

oscam.user

Spoiler

[account]
user = serverbox
keepalive = 1
au = 1
group = 1
cccignorereshare = 0

 

[Coachi]

Jetzt läuft garnichtsmehr.

Sorry, aber im Moment läuft nichtmal mehr meine alte Konfiguration mit CCCam.