Oscam als Server einrichten (Golden Media Cr990)

[gundigan]

Hallo Leute,

ich habe hier eine Log des Servers habe jetzt erst mal alle A Schritte des V13 Bereichs befolgt.
Eventuell hilft die Log weiter, hier steht auch was von Card system not supported.

LOG:

Spoiler

2012/05/22 18:05:23 0 s thread 2983B000 exit with signal 15
2012/05/22 18:05:23 0 s cardserver down
2012/05/22 18:05:26 0 s starting thread log_list_thread
2012/05/22 18:05:26 0 s log_list_thread thread started

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue May 22 18:05:26 2012
-------------------------------------------------------------------------------
2012/05/22 18:05:27 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6801 (sh4-qboxhd-linux)
2012/05/22 18:05:27 0 s version=1.20-unstable_svn, build #6801, system=sh4-qboxhd-linux, nice=-1
2012/05/22 18:05:27 0 s client max. idle=120 sec, debug level=0
2012/05/22 18:05:27 0 s max. logsize=500 Kb, loghistorysize=4096 bytes
2012/05/22 18:05:27 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/05/22 18:05:27 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2012/05/22 18:05:27 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/05/22 18:05:27 0 s signal handling initialized (type=sysv)
2012/05/22 18:05:27 0 s 1 service-id's loaded in 2ms
2012/05/22 18:05:27 0 s 105 tier-id's loaded
2012/05/22 18:05:27 0 s 11 provid's loaded
2012/05/22 18:05:27 0 s 1 lengths for caid guessing loaded
2012/05/22 18:05:27 0 s 4 entries read from oscam.whitelist
2012/05/22 18:05:27 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/05/22 18:05:27 0 s Starting listener 0
2012/05/22 18:05:27 0 s monitor: disabled
2012/05/22 18:05:27 0 s Starting listener 0
2012/05/22 18:05:27 0 s camd35: disabled
2012/05/22 18:05:27 0 s Starting listener 0
2012/05/22 18:05:27 0 s cs378x: disabled
2012/05/22 18:05:27 0 s Starting listener 0
2012/05/22 18:05:27 0 s newcamd: disabled
2012/05/22 18:05:27 0 s Starting listener 0
2012/05/22 18:05:27 0 s pandora: disabled
2012/05/22 18:05:27 0 s Starting listener 0
2012/05/22 18:05:27 0 s csp: disabled
2012/05/22 18:05:27 0 s Starting listener 0
2012/05/22 18:05:27 0 s radegast: disabled
2012/05/22 18:05:27 0 s starting thread http
2012/05/22 18:05:27 0 s http thread started
2012/05/22 18:05:27 0 s starting thread reader check
2012/05/22 18:05:27 0 s reader check thread started
2012/05/22 18:05:27 0 s starting thread check
2012/05/22 18:05:27 0 s check thread started
2012/05/22 18:05:27 0 s creating thread for device /dev/sci0
2012/05/22 18:05:27 566068 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2012/05/22 18:05:27 56CC00 h HTTP Server listening on port 8888
2012/05/22 18:05:27 0 s waiting for local card init
2012/05/22 18:05:28 566068 r v13 card detected
2012/05/22 18:05:37 566068 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/05/22 18:05:37 566068 r Reader v13: ******* Warning: fix your oscam reader config for correct mhz (interface speed) and cardmhz (cardspeed) *******
2012/05/22 18:05:37 566068 r Reader v13: ******* Your setting: 357, is not matching formal optimal cardspeed: 500 *******
2012/05/22 18:05:38 566068 r Reader v13: Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:05:39 566068 r card system not supported
2012/05/22 18:05:39 566068 r Normal mode failed, reverting to Deprecated Mode
2012/05/22 18:05:39 566068 r Error activating card.
2012/05/22 18:05:40 566068 r Error activating card.
2012/05/22 18:05:40 566068 r Error activating card.
2012/05/22 18:05:41 566068 r card initializing error
2012/05/22 18:05:41 0 s init for all local cards done
2012/05/22 18:05:41 0 s anti cascading disabled
2012/05/22 18:05:41 56F9A8 c plain dvbapi-client granted (anonymous, au=off)
2012/05/22 18:05:41 56F9A8 c dvbapi: 4 entries read from oscam.dvbapi
2012/05/22 18:06:47 56CC00 h Refresh Server requested by WebIF from 192.168.178.34
2012/05/22 18:08:46 56CC00 h dvbapi: reread priority file oscam.dvbapi
2012/05/22 18:08:46 56CC00 h dvbapi: 4 entries read from oscam.dvbapi
2012/05/22 18:10:10 56CC00 h dvbapi: reread priority file oscam.dvbapi
2012/05/22 18:10:11 56CC00 h dvbapi: 4 entries read from oscam.dvbapi
2012/05/22 18:11:27 56CC00 h userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/05/22 18:11:27 56CC00 h userdb 2 accounts freed
2012/05/22 18:12:18 56CC00 h oscam.srvid loading failed, old format
2012/05/22 18:12:35 56CC00 h 4 entries read from oscam.whitelist

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:00:48 2000
-------------------------------------------------------------------------------
2000/01/01 00:00:48 0 s starting thread log_list_thread
2000/01/01 00:00:48 0 s log_list_thread thread started
2000/01/01 00:00:48 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6801 (sh4-qboxhd-linux)
2000/01/01 00:00:48 0 s version=1.20-unstable_svn, build #6801, system=sh4-qboxhd-linux, nice=-1
2000/01/01 00:00:48 0 s client max. idle=120 sec, debug level=0
2000/01/01 00:00:48 0 s max. logsize=500 Kb, loghistorysize=4096 bytes
2000/01/01 00:00:48 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 00:00:48 0 s The current system time is smaller than the build date (May 14 2012). Waiting up to 60 seconds for time to correct
2012/05/22 18:14:43 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2012/05/22 18:14:43 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2012/05/22 18:14:43 0 s signal handling initialized (type=sysv)
2012/05/22 18:14:43 0 s oscam.srvid loading failed, old format
2012/05/22 18:14:43 0 s 105 tier-id's loaded
2012/05/22 18:14:43 0 s 11 provid's loaded
2012/05/22 18:14:43 0 s 1 lengths for caid guessing loaded
2012/05/22 18:14:43 0 s 4 entries read from oscam.whitelist
2012/05/22 18:14:43 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/05/22 18:14:43 0 s Starting listener 0
2012/05/22 18:14:43 0 s monitor: disabled
2012/05/22 18:14:43 0 s Starting listener 0
2012/05/22 18:14:43 0 s camd35: disabled
2012/05/22 18:14:43 0 s Starting listener 0
2012/05/22 18:14:43 0 s cs378x: disabled
2012/05/22 18:14:43 0 s Starting listener 0
2012/05/22 18:14:43 0 s newcamd: disabled
2012/05/22 18:14:43 0 s Starting listener 0
2012/05/22 18:14:43 0 s pandora: disabled
2012/05/22 18:14:43 0 s Starting listener 0
2012/05/22 18:14:43 0 s csp: disabled
2012/05/22 18:14:43 0 s Starting listener 0
2012/05/22 18:14:43 0 s radegast: disabled
2012/05/22 18:14:43 0 s starting thread http
2012/05/22 18:14:43 0 s http thread started
2012/05/22 18:14:43 0 s starting thread reader check
2012/05/22 18:14:43 0 s reader check thread started
2012/05/22 18:14:43 0 s starting thread check
2012/05/22 18:14:43 565F40 h HTTP Server listening on port 8888
2012/05/22 18:14:43 0 s check thread started
2012/05/22 18:14:43 0 s creating thread for device /dev/sci0
2012/05/22 18:14:43 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/05/22 18:14:43 0 s waiting for local card init
2012/05/22 18:14:43 56B678 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2012/05/22 18:14:44 56B678 r v13 card detected
2012/05/22 18:14:49 56B678 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/05/22 18:14:49 56B678 r Reader v13: ******* Warning: fix your oscam reader config for correct mhz (interface speed) and cardmhz (cardspeed) *******
2012/05/22 18:14:49 56B678 r Reader v13: ******* Your setting: 357, is not matching formal optimal cardspeed: 500 *******
2012/05/22 18:14:50 56B678 r Reader v13: Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 18:14:51 56B678 r card system not supported
2012/05/22 18:14:51 56B678 r Normal mode failed, reverting to Deprecated Mode
2012/05/22 18:14:51 56B678 r Error activating card.
2012/05/22 18:14:52 56B678 r Error activating card.
2012/05/22 18:14:52 56B678 r Error activating card.
2012/05/22 18:14:53 56B678 r card initializing error
2012/05/22 18:14:53 0 s init for all local cards done
2012/05/22 18:14:53 0 s anti cascading disabled
2012/05/22 18:14:53 56DEB0 c plain dvbapi-client granted (ines, au=auto (1 reader))
2012/05/22 18:14:53 56DEB0 c dvbapi: 4 entries read from oscam.dvbapi
2012/05/22 18:14:53 56DEB0 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 172F PROVID: 000000
2012/05/22 18:14:53 56DEB0 c dvbapi: [ADD PID 1] CAID: 1833 ECM_PID: 182F PROVID: 000000
2012/05/22 18:14:53 56DEB0 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B2F PROVID: 000000
2012/05/22 18:14:53 56DEB0 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1A2F PROVID: 000000
2012/05/22 18:14:53 56DEB0 c dvbapi: new program number: 0039 (1702:0039 unknown) [pmt_list_management 3]
2012/05/22 18:14:54 56DEB0 c ines (1833&000000/0000/0039/897CC): invalid (1 ms) (0 of 0) - 1833:0039 unknown
2012/05/22 18:14:54 56DEB0 c dvbapi: try pids again #1
2012/05/22 18:14:54 56DEB0 c ines (098C&000000/0000/0039/91:053F): invalid (0 ms) (0 of 0) - 098C:0039 unknown
2012/05/22 18:14:54 56DEB0 c ines (1833&000000/0000/0039/89:84FE): invalid (0 ms) (0 of 0) - 1833:0039 unknown
2012/05/22 18:14:55 56DEB0 c dvbapi: try pids again #2
2012/05/22 18:14:55 56DEB0 c ines (098C&000000/0000/0039/91:053F): invalid (0 ms) (0 of 0) - 098C:0039 unknown
2012/05/22 18:14:55 56DEB0 c ines (1833&000000/0000/0039/89:84FE): invalid (0 ms) (0 of 0) - 1833:0039 unknown
2012/05/22 18:14:56 56DEB0 c dvbapi: try pids again #3
2012/05/22 18:14:56 56DEB0 c dvbapi: can't decode channel
2012/05/22 18:14:56 56DEB0 c ines (098C&000000/0000/0039/91:053F): invalid (0 ms) (0 of 0) - 098C:0039 unknown

Über Hilfe würde ich mich sehr freuen

 

[Kermit]

Hi,

einen Schritt nach dem anderem. Fangen wir mit deiner internen V13 Karte an. Die wird nicht erkannt.
Setze einmal
mhz = 500
cardmhz = 500
und schau ob du eine andere OScam Version bekommen kannst, wenn der Fehler mit ERROR in IO... weiterhin besteht.

Grüße

Kermit

 

[gundigan]

Hi Kermit,

habe deine Anweisungen befolgt und die mhz auf 500 gestellt. Leider kam bei der Oscam Version 6801 weiterhin der Fehler.
Habe anschließend Version 6794 probiert und siehe da, dass Bild wird Hell.

Wollte anschließen über das Webinf die Schritte B hinzufügen um den Server einzurichten, leider komme ich bei dieser Version nicht auf das Webinf.
Funktioniert Oscam dennoch vernünftig?

Neue Log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 00:00:59 2000
-------------------------------------------------------------------------------
2000/01/01 0:00:59 29893208 s >> OSCam << cardserver started, version 1.10rc-svn, build # (sh4-linux)
2000/01/01 0:00:59 29893208 s version=1.10rc-svn, build #, system=sh4-linux-, nice=-1
2000/01/01 0:00:59 29893208 s client max. idle=120 sec, debug level=0
2000/01/01 0:00:59 29893208 s max. logsize=500 Kb, loghistorysize=4096 bytes
2000/01/01 0:00:59 29893208 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:00:59 29893208 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2000/01/01 0:00:59 29893208 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:01:00 29893208 s signal handling initialized (type=sysv)

 

[Kermit]

Hi,

wenn du in deiner oscam.conf den Abschnitt [webif] drinnen hast und dieser richtig konfiguriert ist solltest du auch auf das WebIf zugreifen können. Sollte dies nicht der Fall sein, so kann ich nicht davon ausgehen, dass OScam "vernünftig" funktioniert.
Das WebIf ist eine prima Sache und wenn es um das Konfigurieren geht solltest du schon drauf zugreifen können.

Grüße

Kermit

 

[gundigan]

Hi kermit,

in der Oscam.conf ist nach wie vor das selbe bei Webinf eingetragen:

Oscam.conf

Spoiler

[global]
logfile = /root/plugin/var/log/oscam/oscam.log
fallbacktimeout = 2500
clientmaxidle = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 500
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 500
lb_savepath = /tmp/.oscam/stat
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_use_locking = 1

[monitor]
httpcss = /var/config//hexer ddcstyle.css
monlevel = 4
appendchaninfo = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ines
pmt_mode = 1
request_mode = 0

[webif]
httpport = 8888
httphelplang = de
httpuser = oscam
httppwd = oscam
httprefresh = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpsavefullcfg = 1

[cccam]
port = 41251
reshare = 1
ignorereshare = 0
forward_origin_card = 0
version = 2.2.1
updateinterval = 240
minimizecards = 0
keepconnected = 1
stealth = 0
nodeid = 364A0E8E104613A6
reshare_mode = 0

Ich probiere jetzt mal den Clienten einzurichten, da das Bild Hell ist und die Log keine Fehler meldet.
Bis jetzt ist das mein größter Erfolg mit der Version.


es wir spannend hier die Log des Servers:

Spoiler

2000/01/01 0:00:48 29893208 s >> OSCam << cardserver started, version 1.10rc-svn, build # (sh4-linux)
2000/01/01 0:00:48 29893208 s version=1.10rc-svn, build #, system=sh4-linux-, nice=-1
2000/01/01 0:00:48 29893208 s client max. idle=120 sec, debug level=0
2000/01/01 0:00:48 29893208 s max. logsize=500 Kb, loghistorysize=4096 bytes
2000/01/01 0:00:48 29893208 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:00:48 29893208 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2000/01/01 0:00:48 29893208 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:00:48 29893208 s signal handling initialized (type=sysv)

Client Log:

Spoiler

2000/01/01 0:00:58 29893208 s >> OSCam << cardserver started, version 1.10rc-svn, build # (sh4-linux)
2000/01/01 0:00:58 29893208 s version=1.10rc-svn, build #, system=sh4-linux-, nice=-1
2000/01/01 0:00:58 29893208 s client max. idle=120 sec, debug level=0
2000/01/01 0:00:58 29893208 s max. logsize=500 Kb, loghistorysize=4096 bytes
2000/01/01 0:00:58 29893208 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 0:00:58 29893208 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2000/01/01 0:00:58 29893208 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 0:00:58 29893208 s signal handling initialized (type=sysv)

Auch habe ich alle A Schritte die, die V13 Behandeln genau so eingerichtet wie beim Server, mit Ausnahme der oscam.server hier habe ich natürlich den Schritt C mit der entprechenden Server IP eingetragen. Das Bild ist aber schwarz, was kann ich tun?

 

[Kermit]

Hi,

beide Logfiles passen nicht zu deinen Konfigs!
Ich fürchte deine OScam erwartet die Konfigfiles an einem anderen Ost, als an dem du sie abgespeichert hast.

Grüße

Kermit

 

[gundigan]

Hi Kermit,

Habe folgende Oscam Versionen bis jetzt verwendet.

Oscam Versionen

Spoiler

[TABLE="width: 80"]
[TR]
[TD="class: xl65, width: 80"]6801 nein
[/TD]
[/TR]
[TR]
[TD="class: xl65"]6794 ja ohne webinf
[/TD]
[/TR]
[TR]
[TD="class: xl65"]6795 nein
[/TD]
[/TR]
[TR]
[TD="class: xl65"]6786 nein
[/TD]
[/TR]
[TR]
[TD="class: xl65"]6789 nein
[/TD]
[/TR]
[/TABLE]

Die Configs habe ich alle in var/tuxbox/config gespeichert, denke da sollten die richtig sein?
Habe auch schon von Haus aus im var/keys die Datein oscam.conf, oscam.server und oscam user was machen die da?

Update:

Habe jetzt wieder die Version 6794 auf den Server mit selben Einstellungen aufgespielt, Bild ist Dunkel

Neue Log:

Spoiler

2012/05/22 20:17:03 0 s starting thread log_list_thread
2012/05/22 20:17:03 0 s log_list_thread thread started
2012/05/22 20:17:03 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6794 (sh4-qboxhd-linux)
2012/05/22 20:17:03 0 s version=1.20-unstable_svn, build #6794, system=sh4-qboxhd-linux, nice=-1
2012/05/22 20:17:03 0 s client max. idle=120 sec, debug level=0
2012/05/22 20:17:03 0 s max. logsize=500 Kb, loghistorysize=4096 bytes
2012/05/22 20:17:03 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/05/22 20:17:03 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2012/05/22 20:17:03 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/05/22 20:17:03 0 s signal handling initialized (type=sysv)
2012/05/22 20:17:03 0 s oscam.srvid loading failed, old format
2012/05/22 20:17:03 0 s 105 tier-id's loaded
2012/05/22 20:17:03 0 s 11 provid's loaded
2012/05/22 20:17:03 0 s 1 lengths for caid guessing loaded
2012/05/22 20:17:03 0 s 4 entries read from oscam.whitelist
2012/05/22 20:17:03 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/05/22 20:17:03 0 s Starting listener 0
2012/05/22 20:17:03 0 s monitor: disabled
2012/05/22 20:17:03 0 s Starting listener 0
2012/05/22 20:17:03 0 s camd35: disabled
2012/05/22 20:17:03 0 s Starting listener 0
2012/05/22 20:17:03 0 s cs378x: disabled
2012/05/22 20:17:03 0 s Starting listener 0
2012/05/22 20:17:03 0 s newcamd: disabled
2012/05/22 20:17:03 0 s Starting listener 0
2012/05/22 20:17:03 0 s cccam: initialized (fd=4, port=41251, crypted)
2012/05/22 20:17:03 0 s Starting listener 0
2012/05/22 20:17:03 0 s pandora: disabled
2012/05/22 20:17:03 0 s Starting listener 0
2012/05/22 20:17:03 0 s csp: disabled
2012/05/22 20:17:03 0 s Starting listener 0
2012/05/22 20:17:03 0 s radegast: disabled
2012/05/22 20:17:03 0 s starting thread http
2012/05/22 20:17:03 0 s http thread started
2012/05/22 20:17:03 0 s starting thread reader check
2012/05/22 20:17:03 0 s reader check thread started
2012/05/22 20:17:03 0 s starting thread check
2012/05/22 20:17:03 0 s check thread started
2012/05/22 20:17:03 0 s creating thread for device /dev/sci0
2012/05/22 20:17:03 566178 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)
2012/05/22 20:17:03 0 s waiting for local card init
2012/05/22 20:17:03 2D100468 h HTTP Server listening on port 8888
2012/05/22 20:17:04 566178 r v13 card detected
2012/05/22 20:17:08 566178 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/05/22 20:17:11 566178 r Reader v13: Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r Reader v13: ERROR in IO_Serial_Write actual written=0 of=5 (errno=1 Operation not permitted)
2012/05/22 20:17:12 566178 r card system not supported
2012/05/22 20:17:12 566178 r Normal mode failed, reverting to Deprecated Mode
2012/05/22 20:17:12 566178 r Error activating card.
2012/05/22 20:17:13 566178 r Error activating card.
2012/05/22 20:17:13 566178 r Error activating card.
2012/05/22 20:17:14 566178 r card initializing error
2012/05/22 20:17:15 0 s init for all local cards done
2012/05/22 20:17:15 0 s anti cascading disabled
2012/05/22 20:17:15 56EA28 c plain dvbapi-client granted (ines, au=auto (1 reader))
2012/05/22 20:17:15 56EA28 c dvbapi: 4 entries read from oscam.dvbapi
2012/05/22 20:17:15 56EA28 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2012/05/22 20:17:15 56EA28 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2012/05/22 20:17:15 56EA28 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2012/05/22 20:17:15 56EA28 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2012/05/22 20:17:15 56EA28 c dvbapi: [ADD PID 4] CAID: 0648 ECM_PID: 1FCC PROVID: 000000
2012/05/22 20:17:15 56EA28 c dvbapi: [ADD PID 5] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2012/05/22 20:17:15 56EA28 c dvbapi: new program number: EF10 (1830:EF10 unknown) [pmt_list_management 3]
2012/05/22 20:17:15 56EA28 c ines (1830&000000/0000/EF10/92:2E92): invalid (0 ms) (0 of 0) - 1830:EF10 unknown
2012/05/22 20:17:15 56EA28 c ines (1843&000000/0000/EF10/89:B572): invalid (0 ms) (0 of 0) - 1843:EF10 unknown
2012/05/22 20:17:15 56EA28 c ines (098C&000000/0000/EF10/59:7337): invalid (0 ms) (0 of 0) - 098C:EF10 unknown
2012/05/22 20:17:15 56EA28 c dvbapi: Found 2 IRDETO ECM CHIDs
2012/05/22 20:17:15 56EA28 c dvbapi: trying irdeto chid index: 1
2012/05/22 20:17:15 56EA28 c ines (0648&000000/0015/EF10/44:6563): invalid (0 ms) (0 of 0) - 0648:EF10 unknown
2012/05/22 20:17:15 56EA28 c ines (0648&000000/0017/EF10/44:A03B): invalid (0 ms) (0 of 0) - 0648:EF10 unknown
2012/05/22 20:17:16 56EA28 c dvbapi: try pids again #1
2012/05/22 20:17:16 56EA28 c ines (1860&000000/0000/EF10/89:3DCA): invalid (0 ms) (0 of 0) - 1860:EF10 unknown
2012/05/22 20:17:16 56EA28 c ines (1830&000000/0000/EF10/92:2E92): invalid (0 ms) (0 of 0) - 1830:EF10 unknown
2012/05/22 20:17:16 56EA28 c ines (1843&000000/0000/EF10/89:B572): invalid (0 ms) (0 of 0) - 1843:EF10 unknown
2012/05/22 20:17:16 56EA28 c ines (098C&000000/0000/EF10/59:5EBE): invalid (0 ms) (0 of 0) - 098C:EF10 unknown
2012/05/22 20:17:16 56EA28 c dvbapi: trying irdeto chid index: 1
2012/05/22 20:17:16 56EA28 c ines (0648&000000/0015/EF10/44:6092): invalid (0 ms) (0 of 0) - 0648:EF10 unknown
2012/05/22 20:17:16 56EA28 c ines (0648&000000/0017/EF10/44:7ADA): invalid (0 ms) (0 of 0) - 0648:EF10 unknown
2012/05/22 20:17:16 56EA28 c dvbapi: try pids again #2
2012/05/22 20:17:16 56EA28 c ines (1860&000000/0000/EF10/89:3481): invalid (1 ms) (0 of 0) - 1860:EF10 unknown
2012/05/22 20:17:17 56EA28 c ines (1830&000000/0000/EF10/92:0C01): invalid (0 ms) (0 of 0) - 1830:EF10 unknown
2012/05/22 20:17:17 56EA28 c ines (1843&000000/0000/EF10/89:95C7): invalid (0 ms) (0 of 0) - 1843:EF10 unknown
2012/05/22 20:17:17 56EA28 c ines (098C&000000/0000/EF10/59:5EBE): invalid (0 ms) (0 of 0) - 098C:EF10 unknown
2012/05/22 20:17:17 56EA28 c dvbapi: trying irdeto chid index: 1
2012/05/22 20:17:17 56EA28 c ines (0648&000000/0015/EF10/44:6092): invalid (1 ms) (0 of 0) - 0648:EF10 unknown
2012/05/22 20:17:17 56EA28 c ines (0648&000000/0017/EF10/44:7ADA): invalid (0 ms) (0 of 0) - 0648:EF10 unknown
2012/05/22 20:17:18 56EA28 c dvbapi: try pids again #3
2012/05/22 20:17:18 56EA28 c dvbapi: can't decode channel
2012/05/22 20:17:18 56EA28 c ines (1860&000000/0000/EF10/89:3481): invalid (0 ms) (0 of 0) - 1860:EF10 unknown

Gibt es den keine vernünftige Version für den Golden Media Spark Reloaded?

 

[Kermit]

Hi,

was Images und Receiver angeht, so bin ich nicht unbedingt der richtige Ansprechpartner. Soweit ich informiert bin ist es abhängig vom Image, wo die jeweiligen Konfigs abgespeichert werden.
Wenn sie bei dir "von Haus aus" bereits unter /var/keys zu finden sind, warum nimmst du nicht diese und editierst sie passend?

Grüße

Kermit

 

[gundigan]

Hi Kermit,

das komische ist ich hatte in beiden Ordnern Keys also in var/keys und in var/tuxbox/keys, habe jetzt alle Configs sicherheitshalber in beide Ordner kopiert.
Auch habe ich diesen Thread gefunden (Talk oscam Versionen für den golden media 990) leider ist diese Version nicht mehr auffindbar.

Langsam wird das echt komisch ich weiss nicht mehr weiter.
Habe folgende Spark Version 1.2.45 soll ich 1.2.32 installieren ?

Jetzt habe ich eine Oscam Version gefunden, hier komme ich auf Webinf aber das Bild ist Dunkel.
Auch habe ich Spark 1.2.32 aufgespielt. Des weiteren steht nun was von Error aktivating card aber ich habe ein Bild mit mcas.

Log:

Spoiler

2000/01/01 00:00:42 0 s log_list_thread thread started
2000/01/01 00:00:42 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6573 (sh4-amino-linux)
2000/01/01 00:00:42 0 s version=1.20-unstable_svn, build #6573, system=sh4-amino-linux, nice=-1
2000/01/01 00:00:42 0 s client max. idle=120 sec, debug level=0
2000/01/01 00:00:42 0 s max. logsize=500 Kb, loghistorysize=4096 bytes
2000/01/01 00:00:42 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2000/01/01 00:00:42 0 s The current system time is smaller than the build date (Mar 24 2012). Waiting up to 60 seconds for time to correct
2012/05/22 21:38:10 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2012/05/22 21:38:10 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/05/22 21:38:10 0 s signal handling initialized (type=sysv)
2012/05/22 21:38:10 0 s oscam.srvid loading failed, old format
2012/05/22 21:38:10 0 s 105 tier-id's loaded
2012/05/22 21:38:10 0 s 11 provid's loaded
2012/05/22 21:38:10 0 s 1 lengths for caid guessing loaded
2012/05/22 21:38:10 0 s 4 entries read from oscam.whitelist
2012/05/22 21:38:10 0 s can't open cacheex-matcher file /var/tuxbox/config/oscam.cacheex
2012/05/22 21:38:10 0 s Starting listener 0
2012/05/22 21:38:10 0 s monitor: disabled
2012/05/22 21:38:10 0 s Starting listener 0
2012/05/22 21:38:10 0 s camd35: disabled
2012/05/22 21:38:10 0 s Starting listener 0
2012/05/22 21:38:10 0 s cs378x: disabled
2012/05/22 21:38:10 0 s Starting listener 0
2012/05/22 21:38:10 0 s newcamd: disabled
2012/05/22 21:38:10 0 s Starting listener 0
2012/05/22 21:38:10 0 s cccam: initialized (fd=4, port=41251, crypted)
2012/05/22 21:38:10 0 s Starting listener 0
2012/05/22 21:38:10 0 s pandora: disabled
2012/05/22 21:38:10 0 s Starting listener 0
2012/05/22 21:38:10 0 s csp: disabled
2012/05/22 21:38:10 0 s Starting listener 0
2012/05/22 21:38:10 0 s radegast: disabled
2012/05/22 21:38:10 0 s starting thread http
2012/05/22 21:38:10 579D48 h HTTP Server listening on port 8888
2012/05/22 21:38:10 0 s http thread started
2012/05/22 21:38:10 0 s starting thread reader check
2012/05/22 21:38:10 0 s reader check thread started
2012/05/22 21:38:10 0 s starting thread check
2012/05/22 21:38:10 0 s check thread started
2012/05/22 21:38:10 0 s creating thread for device /dev/sci0
2012/05/22 21:38:10 580AB8 r reader v13 initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=500)
2012/05/22 21:38:10 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/05/22 21:38:10 0 s waiting for local card init
2012/05/22 21:38:11 580AB8 r v13 card detected
2012/05/22 21:38:16 580AB8 r ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2012/05/22 21:38:17 580AB8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz
2012/05/22 21:38:18 580AB8 r ERROR in IO_Serial_Write u=-1 to_send=5 (errno=1 Operation not permitted)
2012/05/22 21:38:18 580AB8 r ERROR in IO_Serial_Write u=-1 to_send=5 (errno=1 Operation not permitted)
2012/05/22 21:38:18 580AB8 r card system not supported
2012/05/22 21:38:18 580AB8 r Normal mode failed, reverting to Deprecated Mode
2012/05/22 21:38:18 580AB8 r Error activating card.
2012/05/22 21:38:19 580AB8 r Error activating card.
2012/05/22 21:38:19 580AB8 r Error activating card.
2012/05/22 21:38:20 580AB8 r card initializing error
2012/05/22 21:38:20 0 s init for all local cards done
2012/05/22 21:38:20 0 s anti cascading disabled
2012/05/22 21:38:20 583FA8 c plain dvbapi-client granted (ines, au=auto (1 reader))
2012/05/22 21:38:20 583FA8 c dvbapi: 4 entries read from oscam.dvbapi

Das ist doch wie verhext mir scheint dieses Konzept des CS nicht ganz ausgereift zu sein.
Hat noch jemand eine Idee?

Hi Leute,

ich habe jetzt schon x Versionen von Oscam probiert auch SH 4 Amino, bei dieser komme ich sogar ins Webinterface.
Aber dieser IO Error der schon mal beschrieben wurde kommt ständig. Es kann doch net sein, dass ich 6800 Oscam Versionen testen muss.

Folgende Plugins sind aktiviert.

WLtool (neuste Version)
Mcas (neuste Version)
Oscam (6801 neuste Version)

Da stimmt doch gewaltig was nicht. Bitte um Hilfe... ich bin echt verzweifelt.

 

[butzi03]

hi,

leute könnt ihr gundigan denn nicht weiterhelfen,bin sein kumpel habn gestern 7 std rumprobiert wir sind echt am verzweifeln

braucht man denn mcas überhaupt?

habe gerade bischen rumgelesen und viele benutzen nur oscam (auch um die kare zu lesen)..

bite helfts uns ..

lg

 

[gundigan]

Hi Leute,

habe die V13 inklusive den Clienten zum laufen gebracht. Leider sind alle HD Sender sowie alle Sky HD Sender Dunkel beim Clienten Dunkel.
Die meisten SD Sender laufen einwandfrei.

Was ist hier zu tun?

Danke

 

[Kermit]

Hi,

wenn die SD Sender von Sky gehen, so müssen auch die HD Sender von Sky gehen bei einer V13 Karte.
Entweder sie werden nicht von deiner lokalen Karte entschlüsselt oder du hast jetzt Services eingetragen, die nicht vollständig sind.

Grüße

Kermit