Hallo,
habe eine brandneue ORF ICE Karte und will sie im OSCAM (Ubuntu Server) verwenden. Egal ob ich im Irdeto Modus oder im CW Modus initialisiere es kommt immer ein "ATR is malformed" Fehler. Ist der Reader defekt oder liegt es an der Config?
Hier der Versuch mit Irdeto:
oscam.server
log
Hier mit Cryptoworks Mode:
oscam.server
Bin für jeden Tipp dankbar.
Luigi
habe eine brandneue ORF ICE Karte und will sie im OSCAM (Ubuntu Server) verwenden. Egal ob ich im Irdeto Modus oder im CW Modus initialisiere es kommt immer ein "ATR is malformed" Fehler. Ist der Reader defekt oder liegt es an der Config?
Hier der Versuch mit Irdeto:
oscam.server
#[reader]
label = orf
enable = 1
protocol = mouse
device = /dev/ttyS1
caid = 0648
ident = 0648:000000
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
lb_weight = 100
force_irdeto = 1
deprecated = 1
boxid = 12345678
rsakey = DF...2D
boxkey = 11...88
label = orf
enable = 1
protocol = mouse
device = /dev/ttyS1
caid = 0648
ident = 0648:000000
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
lb_weight = 100
force_irdeto = 1
deprecated = 1
boxid = 12345678
rsakey = DF...2D
boxkey = 11...88
log
2011/09/21 17:14:25 B6A74B70 r reader thread started (thread=B6A74B70, label=orf, device=/dev/ttyS1, detect=cd, mhz=600, cardmhz=600)
2011/09/21 17:14:28 B6A74B70 r orf card detected
2011/09/21 17:14:31 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:34 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:38 B6A74B70 r ATR: xx xx xx xx xx xx xx xx xx xx
2011/09/21 17:14:38 B6A74B70 r ERROR: Could not read reader->convention
2011/09/21 17:14:38 B6A74B70 r Error activating card.
2011/09/21 17:14:42 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:45 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:49 B6A74B70 r ATR: xx xx xx xx xx xx xx xx xx xx
2011/09/21 17:14:49 B6A74B70 r ERROR: Could not read reader->convention
2011/09/21 17:14:49 B6A74B70 r Error activating card.
2011/09/21 17:14:53 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:56 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:59 B6A74B70 r ATR is malformed, it reports 11 historical bytes but there are only 4
2011/09/21 17:15:00 B6A74B70 r ATR: xx xx xx xx xx xx xx xx xx
2011/09/21 17:15:00 B6A74B70 r ERROR: Could not read reader->convention
2011/09/21 17:15:00 B6A74B70 r Error activating card.
2011/09/21 17:15:00 B6A74B70 r card initializing error
2011/09/21 17:14:28 B6A74B70 r orf card detected
2011/09/21 17:14:31 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:34 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:38 B6A74B70 r ATR: xx xx xx xx xx xx xx xx xx xx
2011/09/21 17:14:38 B6A74B70 r ERROR: Could not read reader->convention
2011/09/21 17:14:38 B6A74B70 r Error activating card.
2011/09/21 17:14:42 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:45 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:49 B6A74B70 r ATR: xx xx xx xx xx xx xx xx xx xx
2011/09/21 17:14:49 B6A74B70 r ERROR: Could not read reader->convention
2011/09/21 17:14:49 B6A74B70 r Error activating card.
2011/09/21 17:14:53 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:56 B6A74B70 r ATR is malformed, it reports 1 historical bytes but there are only -1
2011/09/21 17:14:59 B6A74B70 r ATR is malformed, it reports 11 historical bytes but there are only 4
2011/09/21 17:15:00 B6A74B70 r ATR: xx xx xx xx xx xx xx xx xx
2011/09/21 17:15:00 B6A74B70 r ERROR: Could not read reader->convention
2011/09/21 17:15:00 B6A74B70 r Error activating card.
2011/09/21 17:15:00 B6A74B70 r card initializing error
Hier mit Cryptoworks Mode:
oscam.server
[reader]
label = orf
protocol = mouse
detect = cd
device = /dev/ttyS1
group = 1
caid = 0D95
ident = 0D95:000004,000008,00000C,000010
customspeed = 0
emmcache = 1,3,2
label = orf
protocol = mouse
detect = cd
device = /dev/ttyS1
group = 1
caid = 0D95
ident = 0D95:000004,000008,00000C,000010
customspeed = 0
emmcache = 1,3,2
Bin für jeden Tipp dankbar.
Luigi