oRemote Aktualisiert: 31 August 2013 Version: 1.4.9 Erfordert iOS 4.3 oder neuer. Kompatibel mit iPhone, iPad und iPod touch. Diese App ist für iPhone 5 optimiert. Beschreibung **NOTE: When updating or running for the first time: if you cannot detect or connect to your receiver, try unplugging the receiver and plug it back in to reset the network card. This resolves practically all communication issues** Fully control the features of your network-enabled Onkyo/Integra receiver - from anywhere in your house with an iPhone/iPod/iPad. You no longer need to be in front of the TV to enjoy your receiver. Main Features: • Display of media playback on screen - no need to turn on the TV! • Controls playback of USB sources, iRadio, DLNA and Windows Media shared media • Supports UP-A1 iPod Dock, UP-HT1 HD Radio Tuner, UP-DT1 DAB+ Tuner, DS-A3 iPod dock • Customize labels for sources, presets and listening modes • Control more than one receiver at a time • Easy configuration and setup - auto-detect and auto-setup • Zone Controls for all supported zones, including power, volume, and source selection • Enable/Disable unused sources and listening modes • Direct tuning using built-in tuner • Display of audio and video source and output information - HDMI, Bitrate, • Supports several models of Ethernet to RS-232 converters • AirPlay capability with an attached AirPlay compatible device. Stream your music from your iPhone/iPod/iPad to your receiver! Note: AirPlay requires an AirPlay capable iOS device running iOS 4.3 or above and an AirPlay-capable device (Apple TV 2, Airport Express, Boxee, etc.). This works on any model AVR compatible with oRemote Compatibility list (please check carefully): These Onkyo/Integra models fully support all functions: 2013 Onkyo Receivers: TX-NR525, TX-NR626, TX-NR727, TX-NR828, TX-NR929, HT-RC550, HT-RC560. Integra DTR-30.5, DTR-40.5, DTR-50.5, DTR-60.5, DHC-60.5 2012 Onkyo and Integra receivers: TX-NT414, TX-NR515, TX-NR616, TX-NR717, TX-NR818, TX-NR1010, TX-NR3010, TX-NR5010, RC460, HT-RC470, DTR-20.4, DTR-30.4, DTR-50.4, DTR-70.4, DTM-40.4 TEAC AD-G500 These work best with latest Onkyo firmware (no NET menu in Zones): 2011 Onkyo and Integra receivers: HT-R690 (HT-S7400, HT-S8400) , HT-R990 (HT-S9400THX), HT-RC360 HT-RC370, TX-8050, TX-NA509, TX-NA609, TX-NA-609X, TX-NA1009, TX-NA3009, TX-NA5009, TX-NR509, TX-NR579,TX-NR609, TX-NR709, TX-NR809, TX-NR1009, TX-NR3009, TX-NR5009, PR-SC5509 DTR-20.3, DTR-30.3, DTR-40.3, DTR-50.3, DTR-70.3, DHC-80.3, DTR-80.3 HT-RC270, TX-NR708, TX-NR808, TX-NR1008, TX-NR3008, TX-NR5008, PR-SC5508 DTR 40.2, DHC 40.2, DTR 50.2, DHC 50.2, DTR 70.2, DHC 70.2, DTR 80.2, DHC 80.2 These models do not support search capability, album art, or on-screen menus: HT-RC180, TX-NR807, TX-NR1007, TX-NR3007, TX-NR5007, PR-SC5507 DTR-30.2, DTR-40.1, DHC-40.1, DTR-50.1, DTR-70.1, DTR-80.1, DHC-80.1 These models support only volume, source, listening mode and Zone control: TX-NA905, TX-NR905, PR-SC885, TX-NA906, TX-NA906X, TX-NR906, PR-SC886 DTC-7, DTX-7, DTR-7.8, DTX-7.8, DTR-8.8, DTX-8.8, DTC-9.8, DTR-4.9, DTR-5.9, DTX-5.9, DTR-6.9, DTR-7.9, DTR-8.9, DTX-8.9, DTR-9.9, DTX-9.9, DTR-20.1 Contact me through the support link for more info if you have questions on compatibility with your receiver. Support is now included for Onkyo and Integra AVRs that only have a serial port on the back. See the support link for more info on this device and where to purchase one. If you have any pre-purchase questions regarding product compatibility, please contact me through the support link or via Facebook. I personally answer all emails that arrive. The same goes for any support issues. Thank you. Spoiler Größe: 17.6 MB Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?