Nichts wird hell: V13 und HD+01 nicht.

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

Die V13 läuft doch über den Igel. Und da ist ein anderes Wi.

Spoiler

2015/10/05 15:09:19 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (mipsel-openpli40-linux-gnu-libusb)
2015/10/05 15:09:19 00000000 s (main) System name = Linux
2015/10/05 15:09:19 00000000 s (main) Host name = optimussos2plus
2015/10/05 15:09:19 00000000 s (main) Release = 3.9.7
2015/10/05 15:09:19 00000000 s (main) Version = #1 SMP Sat Sep 5 08:15:41 CEST 2015
2015/10/05 15:09:19 00000000 s (main) Machine = mips
2015/10/05 15:09:19 00000000 s (main) Stb model = dm8000
2015/10/05 15:09:19 00000000 s (main) Stb vumodel = vusolo2
2015/10/05 15:09:19 00000000 s (main) Stb boxtype = dm8000
2015/10/05 15:09:19 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 496
2015/10/05 15:09:19 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/10/05 15:09:19 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/10/05 15:09:19 00000000 s (main) signal handling initialized
2015/10/05 15:09:19 00000000 s (config) 155 service-id's loaded in 3 ms
2015/10/05 15:09:19 00000000 s (net) cccam: initialized (fd=5, port=12000)
2015/10/05 15:09:19 00000000 s (reader) reader0_hd+_hd01 [internal] creating thread for device /dev/sci0
2015/10/05 15:09:19 00000000 s (reader) easymouse [cccam] creating thread for device 192.168.178.48
2015/10/05 15:09:19 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/10/05 15:09:19 00000000 s (main) waiting for local card init
2015/10/05 15:09:19 0C6B47D8 p (reader) 192.168.178.48: resolved ip=192.168.178.48
2015/10/05 15:09:19 0C6B47D8 p (reader) easymouse [cccam] connecting to 192.168.178.48:13468
2015/10/05 15:09:19 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
2015/10/05 15:09:19 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Reader sci internal, detected box type: dm8000
2015/10/05 15:09:19 0C6B47D8 p (reader) easymouse [cccam] proxy initialized, server 192.168.178.48:13468
2015/10/05 15:09:19 0D8F0B3A h (webif) webif: decompressed 164060 bytes back into 392536 bytes
2015/10/05 15:09:19 0D8F0B3A h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2015/10/05 15:09:20 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] card detected
2015/10/05 15:09:21 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:09:21 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:09:21 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2015/10/05 15:09:21 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 953
2015/10/05 15:09:22 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:09:23 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:09:24 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
2015/10/05 15:09:25 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 15:09:26 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 15:09:27 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:09:27 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:09:27 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2015/10/05 15:09:27 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 44
2015/10/05 15:09:28 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:09:28 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:09:30 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 15:09:31 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 15:09:32 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:09:32 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:09:32 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2015/10/05 15:09:32 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 41
2015/10/05 15:09:33 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:09:33 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:09:33 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] card system not supported
2015/10/05 15:09:33 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2015/10/05 15:09:34 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:09:34 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:09:34 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 110.39 us reader mhz = 337
2015/10/05 15:09:34 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 41
2015/10/05 15:09:35 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:09:36 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:09:37 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
2015/10/05 15:09:38 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 15:09:39 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 15:09:40 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:09:40 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:09:40 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 9.50 us reader mhz = 337
2015/10/05 15:09:40 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 42
2015/10/05 15:09:41 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:09:42 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:09:43 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 15:09:44 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 15:09:45 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:09:45 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:09:45 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 9.50 us reader mhz = 337
2015/10/05 15:09:45 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 40
2015/10/05 15:09:46 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:09:47 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:09:47 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] card system not supported
2015/10/05 15:09:47 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/10/05 15:09:47 6D78FDF5 r (reader) reader0_hd+_hd01 [internal] card initializing error
2015/10/05 15:09:47 00000000 s (main) init for all local cards done
2015/10/05 15:09:47 00000000 s (anticasc) anti cascading disabled
2015/10/05 15:09:47 642ED2B6 c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))
2015/10/05 15:09:47 642ED2B6 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2015/10/05 15:09:47 642ED2B6 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/10/05 15:09:52 642ED2B6 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1833 ECM_PID: 180D PROVID: 000000
2015/10/05 15:09:52 642ED2B6 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1B0D PROVID: 000000
2015/10/05 15:09:52 642ED2B6 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1F0D PROVID: 000000
2015/10/05 15:09:52 642ED2B6 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1A0D PROVID: 000000
2015/10/05 15:09:52 642ED2B6 c (dvbapi) Demuxer 0 found 4 ECMpids and 6 STREAMpids in PMT
2015/10/05 15:09:52 642ED2B6 c (dvbapi) Demuxer 0 serving srvid 0069 (Sky Bundesliga HD 1) on adapter 0000 camask 0001 index 0000 pmtpid 0060
2015/10/05 15:09:52 642ED2B6 c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 1
2015/10/05 15:09:52 642ED2B6 c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 09C4 PROVID 000000 ECMPID 1B0D ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 15:09:52 642ED2B6 c (ecm) dvbapiau (09C4@000000/0C1F/0069/B3:30168101360A543407496FB7E075CDD8): found (136 ms) by easymouse - Sky Bundesliga HD 1
2015/10/05 15:09:53 642ED2B6 c (ecm) dvbapiau (09C4@000000/0C1F/0069/B3:E4221695196ADEAF5D0482303A1D651F): found (129 ms) by easymouse - Sky Bundesliga HD 1
2015/10/05 15:10:00 642ED2B6 c (ecm) dvbapiau (09C4@000000/0C1F/0069/B3:0CF878615D4F7FE67AA8769DBAA6FA10): found (129 ms) by easymouse - Sky Bundesliga HD 1


Habe jetzt neu gestartet mit Startkanal Bundesliga.
Warum dvbapiau und Easymouse. DVBAPI hat doch nicht mit der Easymouse zu tun Der versucht über die V13 den HD Sender hell zu bekommen oder sehe ich das falsch

 

[pehedima]

AW: Nichts wird hell: V13 und HD+01 nicht.

Okay.

Dann die folgenden Einstellungen:

autospeed = 1
mhz = 357
cardmhz = 2700

Danach wieder die gesamte Box neu starten und ein neues logfile vom oscam start an posten.

 

[Pilot]

AW: Nichts wird hell: V13 und HD+01 nicht.

Die V13 läuft doch über den Igel. Und da ist ein anderes Wi.
]

Das hast du im 1. Beitrag aber nicht so geschrieben.
War deshalb der Meinung, die hast auch im Receiver

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

Hier der neue Log mit
autospeed = 1
mhz = 357
cardmhz = 2700

Spoiler

2015/10/05 15:49:18 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (mipsel-openpli40-linux-gnu-libusb)
2015/10/05 15:49:18 00000000 s (main) System name = Linux
2015/10/05 15:49:18 00000000 s (main) Host name = optimussos2plus
2015/10/05 15:49:18 00000000 s (main) Release = 3.9.7
2015/10/05 15:49:18 00000000 s (main) Version = #1 SMP Sat Sep 5 08:15:41 CEST 2015
2015/10/05 15:49:18 00000000 s (main) Machine = mips
2015/10/05 15:49:18 00000000 s (main) Stb model = dm8000
2015/10/05 15:49:18 00000000 s (main) Stb vumodel = vusolo2
2015/10/05 15:49:18 00000000 s (main) Stb boxtype = dm8000
2015/10/05 15:49:18 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 495
2015/10/05 15:49:18 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/10/05 15:49:18 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/10/05 15:49:18 00000000 s (main) signal handling initialized
2015/10/05 15:49:18 00000000 s (config) 155 service-id's loaded in 3 ms
2015/10/05 15:49:18 00000000 s (net) cccam: initialized (fd=5, port=12000)
2015/10/05 15:49:18 00000000 s (reader) reader0_hd+_hd01 [internal] creating thread for device /dev/sci0
2015/10/05 15:49:18 00000000 s (reader) easymouse [cccam] creating thread for device 192.168.178.48
2015/10/05 15:49:18 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/10/05 15:49:18 00000000 s (main) waiting for local card init
2015/10/05 15:49:18 7942E186 r (reader) reader0_hd+_hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
2015/10/05 15:49:18 7942E186 r (reader) reader0_hd+_hd01 [internal] Reader sci internal, detected box type: dm8000
2015/10/05 15:49:18 33DF9C0F p (reader) 192.168.178.48: resolved ip=192.168.178.48
2015/10/05 15:49:18 33DF9C0F p (reader) easymouse [cccam] connecting to 192.168.178.48:13468
2015/10/05 15:49:18 33DF9C0F p (reader) easymouse [cccam] proxy initialized, server 192.168.178.48:13468
2015/10/05 15:49:18 4BD6EECD h (webif) webif: decompressed 164060 bytes back into 392536 bytes
2015/10/05 15:49:18 4BD6EECD h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2015/10/05 15:49:19 7942E186 r (reader) reader0_hd+_hd01 [internal] card detected
2015/10/05 15:49:20 7942E186 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:49:20 7942E186 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:49:20 7942E186 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 15:49:20 7942E186 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 989
2015/10/05 15:49:20 7942E186 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:49:21 7942E186 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:49:22 7942E186 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
2015/10/05 15:49:23 7942E186 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 15:49:25 7942E186 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 15:49:25 7942E186 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:49:25 7942E186 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:49:25 7942E186 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 15:49:25 7942E186 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 47
2015/10/05 15:49:26 7942E186 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:49:27 7942E186 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:49:28 7942E186 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 15:49:30 7942E186 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 15:49:30 7942E186 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:49:30 7942E186 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:49:30 7942E186 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 15:49:30 7942E186 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 44
2015/10/05 15:49:31 7942E186 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:49:32 7942E186 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:49:32 7942E186 r (reader) reader0_hd+_hd01 [internal] card system not supported
2015/10/05 15:49:32 7942E186 r (reader) reader0_hd+_hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2015/10/05 15:49:33 7942E186 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:49:33 7942E186 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:49:33 7942E186 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/10/05 15:49:33 7942E186 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 46
2015/10/05 15:49:34 7942E186 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:49:34 7942E186 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:49:35 7942E186 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
2015/10/05 15:49:37 7942E186 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 15:49:38 7942E186 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 15:49:39 7942E186 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 15:49:39 7942E186 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 15:49:39 7942E186 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 15:49:39 7942E186 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 44
2015/10/05 15:49:40 7942E186 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 15:49:40 7942E186 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 15:49:42 7942E186 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

 

[Pilot]

AW: Nichts wird hell: V13 und HD+01 nicht.

Teste das: https://www.digital-eliteboard.com/...evern-als-server-oder-client.html#post1702904

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

Habe ich auch versucht und geht nicht.
Zum testen habe ich mal die oscam.srvid gefüllt und da bleibt dann sogar die V13 dunkel.(Also wieder leer gemacht)

 

[4gx35]

AW: Nichts wird hell: V13 und HD+01 nicht.

hd02 intern nur 2 möglichkeiten:
autospeed=0, mhz und cardmhz 368
cardmhz 2700 , mhz 1 (oder 540) autospeed=1

Link ist nicht mehr aktiv., läuft auch mit ipv4

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

Ich habe eine hd01, trotzdem geht es auch mit deinen Einstellungen nicht.
Eine möglichkeit oscam und cccam 2.3 gleichzeitig laufen zu gibt es die ??
Wenn ich oscam deaktiviere und cccam 2.3 aktiviere dann geht die HD01 Karte.

Ja die oscam habe ich auch schon getestet da geht nichts

 

[4gx35]

AW: Nichts wird hell: V13 und HD+01 nicht.

du kannst doch die hd01 mit cccam auf der box laufen lassen, kein oscam notwendig für hd01!!!
für igel v13 dann c-line bzw. f-line für server, dort proxy einrichten

auch zum loggen reicht cccam

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

C -line bzw f line .
Also müsste ich jedem client ebenfalls eine zuweisen.
Und wenn wie sollte ich da vorgehen. Sorry die habe ich noch nicht eigerichtet.
Da blocken der Emm hat damit nichts zu tun ??

 

[4gx35]

AW: Nichts wird hell: V13 und HD+01 nicht.

teste doch erst einmal, ob die hd+ bei dir mit cccam läuft,
warum die ausgerechnet nicht mit oscam läuft, ist aber schon seltsam

danach wirds einfach

oder andere box mit oscam verwenden ?

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

Jetzt warst Du schneller.

Wie gesagt nur mit cccam 2.3 läuft sie im internen slot 1A
Sobald oscam hinzukommt ist feierabend für beide Karten.
Nur oscam geht die v13 nur alleine.
Ich habe mir extra eine neue Box Optimuss OS2 Plus geholt die mit dem Sky Modul noch zurecht kommt. Beim VIP1 mit Ducktrick Image laufen beide Karten . Dafür geht kein Modul

 

[4gx35]

AW: Nichts wird hell: V13 und HD+01 nicht.

dann wird erst mal eine CCcam.cfg in /etc eingerichtet

C: igel_ip cccamport user pass
F: hdplus hdplus
SERVER LISTEN PORT: 44444

auf dem igel proxy cccam reader mit device=box_ip,44444
user/pass hdplus

Spoiler

[reader]
label = hdserver
protocol = cccam
device = boxip,44444
user = hdplus
password = hdplus
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
ccckeepalive = 1

ich hoffe, ich habe nichts vergessen

bei v13 noch hd+ services blocken,
evtl. CCcam.prio auf der box mit P:1830 und P:09c4

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

okay habe ich gemacht

 

[4gx35]

AW: Nichts wird hell: V13 und HD+01 nicht.

proxy server brauchst du nur, wenn im hs noch andere boxen sind