Nichts wird hell: V13 und HD+01 nicht.

[Verdi-Fan]

AW: Ist der OS2+ eine gute Entscheidung und was läuft drauf?

Sorry, nimm mal diesen Reader:

Spoiler

[reader]
label = reader1_hd+_hd01
enable = 1
protocol = internal
device = /dev/sci1 #hier sci0 oder sci1
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2

Und die Leerzeichen im RSA Key bitte wieder löschen. Die entstehen hier im Posting.

 

[Eliteedi]

AW: Ist der OS2+ eine gute Entscheidung und was läuft drauf?

Erst mal vielen Dank für deine Mühe.
Der Reader geht auch nicht. Könnte Heulen.
Wie kann ich den Bilder einbinden. So könnte ich Dir zeigen was genau angezeigt wird.
Die Lücken habe ich auch entfernt.
Könnte es sein das beim Optimuss OS2 Plus andere MHZ für die Karte HD01 eingestellt werden muß.

Ich sehe gerade, irgendwie wird versucht (dvbapi) , HD+ über die Caid 09C4 hell zu bekommen.
Wie kann ich das umlenken damit er meine HD01 nimmt?

In der dvbapi ist P: 1830 an erster Stelle

 

[Verdi-Fan]

AW: Ist der OS2+ eine gute Entscheidung und was läuft drauf?

Kollege,
einen Gefallen müsstest du mir tun. Schreib deine Dateien mal sauber von A-Z hier rein. Also nicht so ein Gewurschtel, sondern so:

oscam.conf

Spoiler

[global]


[cccam]
port = 12000
reshare = 0
version = 2.3.0


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau


[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam.dvbapi

Spoiler

# dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# M - Map
# format:
# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# D - Delay
# format:
# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#
#
#
#P: 0500:023800 # SRG 2.6
#P: 0D05 # ORF CW / EMU
#P: 0D95 # ORF ICE
#P: 1830:003411 # HD01
#P: 1843:003411 # HD02
#P: 1702 # S02
#P: 1833 # S02HD ohne Betatunnel
#P: 094C # V13
#P: 098C # V14
#P: 098C 1
#I: 0

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-EMU-NFR SVN r8986
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = reader0_sky_s02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2


[reader]
label = reader0_sky_v13
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_sky_v14
enable = 0
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2


[reader]
label = reader0_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2


[reader]
label = reader0_srg_via
enable = 0
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_orf_0d95
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_orf_0d05
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader1_sky_s02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2


[reader]
label = reader1_sky_v13
enable = 0
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 596C3056
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_sky_v14
enable = 0
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2


[reader]
label = reader1_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2


[reader]
label = reader1_srg_via
enable = 0
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_orf_0d95
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = reader1_orf_0d05
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D05
detect = cd
group = 2
emmcache = 1,3,2


[reader]
label = line_cccam
enable = 1
protocol = cccam
device = 192.168.178.12,12334
user = test-test
password = bla-bla
inactivitytimeout = 30
fallback = 1
group = 3
cccversion = 2.3.0
ccckeepalive = 1


[reader]
label = line_newcamd
enable = 0
protocol = newcamd
device = 192.168.0.11,35000
key = 0102030405060708091011121314
user = user
password = password
fallback = 1
group = 4

oscam.user

Spoiler

[account]
user = dvbapiau
pwd = bla-bla
group = 3
uniq = 3
au = 1

Und ich meine wirklich alle (!) Dateien und Inhalte, die du im Ordner /usr/keys/oscam_atv/ findest. Alle Datein und alle Inhalte! Nicht irgendwelche Auszüge, nichts weggelöscht usw. So, wie du es aus dem Feed hast.
Und angepasst, nur das, was wir gesagt haben:
1) Enable (auf 1 setzen)
und dort wo Enable =1 ist
2) IP einsetzen
3) Port einsetzen
4) User und Passwort

in der oscam.user das Passwort ergänzen.
Für die Interne HD01 entsprechend weniger - so wie in der Datei Oscam.server angegeben bzw. vorgeschlagen. Und bitte (!) nicht wieder irgendeine Frickel Datei, sondern das, was aus dem OpenATV Feed für OSCAM ATV angegeboten wird.
Grüße
VF

P.S.: Und wenn du nur die beiden Karten hast, dann lass deine Priorisierungen mal ganz weg. Also DVBAPI kannst du auch alles löschen ...

P.P.S.: Wir können das auch über Services bzw. negative Services machen, aber dann teste bitte erstmal, ob die HD01 hell wird, wenn die V13 ausgeschaltet ist (also Enable = 0 für die V13).

 

[Eliteedi]

AW: Ist der OS2+ eine gute Entscheidung und was läuft drauf?

oscam confiq

Spoiler

[global]
[cccam]
port = 12000
reshare = 0
version = 2.3.0
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau


[webif]

httpport = 83 16002
httphelplang = de
httprefresh = 10
httpuser = wohnz
httppwd = wohnz
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

oscam dvbapi

Spoiler

# dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:
[<provider>]:
[<srvid>]:
[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:
[<provider>]:
[<srvid>]:
[<ecmpid>]
# M - Map
# format:
# M: <caid>:
[<provider>]:
[<srvid>]:
[<ecmpid>] <target caid>:
[<target provider>]
# D - Delay
# format:
# D: <caid>:
[<provider>]:
[<srvid>]:
[<ecmpid>] <delay (ms)>
#
#
#
#P: 0500:023800
# SRG 2.6
#P: 0D05
# ORF CW / EMU
#P: 0D95
# ORF ICE
#P: 1830:003411
# HD01
#P: 1843:003411
# HD02
#P: 1702
# S02
#P: 1833
# S02HD ohne Betatunnel
#P: 094C
# V13
#P: 098C
# V14
P: 1830
P: 094C
I: 0

oscam server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-EMU-NFR SVN r8986

# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = reader0_sky_s02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2


[reader]
label = reader0_sky_v13
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_sky_v14
enable = 0
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
group = 1
emmcache = 1,3,2

[reader]
label = reader0_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

[reader]
label = reader0_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

[reader]
label = reader0_srg_via
enable = 0
protocol = internal
device = /dev/sci0
caid = 0
500
detect = cd
group = 1
emmcache = 1,3,2

[reader]
label = reader0_orf_0d95
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
detect = cd
group = 1
emmcache = 1,3,2

[reader]

label = reader0_orf_0d05
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
detect = cd
group = 1
emmcache = 1,3,2


[reader]
label = reader0_smarthd
enable = 0
protocol = internal
device = /dev/sci0
caid = 0B01
detect = cd
mhz = 500
cardmhz = 357
ident = 0B01:000000
group = 1
emmcache = 1,3,-1


[reader]

label = reader1_sky_s02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2



[reader]

label = reader1_sky_v13
enable = 0
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 596C3056
detect = cd
group = 2
emmcache = 1,3,2



[reader]

label = reader1_sky_v14
enable = 0
protocol = i
nternal
device = /dev/sci1
caid = 098C
boxid = 12345678
detect = cd
group = 2
emmcache = 1,3,2


[reader]

label = reader1_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2


[reader]

label = reader1_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2


[reader]

label = reader1_srg_via
enable = 0
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
group = 2
emmcache = 1,3,2


[reader]

label = reader1_orf_0d95
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
group = 2
emmcache = 1,3,2


[reader]

label = reader1_orf_0d05
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D05
detect = cd
group = 2
emmcache = 1,3,2



[reader]

label = reader1_smarthd
enable = 0
protocol = internal
device = /dev/sci1
caid = 0B01
detect = cd
mhz = 500
cardmhz = 357
ident = 0B01:000000
group = 2
emmcache = 1,3,-1



[reader]
label = line_cccam
enable = 0
protocol = cccam
device = 192.168.0.11,12000
user = user
password = pass
inactivitytimeout = 30
fallback = 1
group = 3
cccversion = 2.3.0
ccckeepalive = 1



[reader]
label = line_newcamd
enable = 0
protocol = newcamd
device = 192.168.0.11,35000
key = 0102030405060708091011121314
user = user
password = pass
word
fallback = 1
group = 4

[reader]
label = easymouse
protocol = cccam
device = 192.168.178.48,13468
user = wohn
password = vipi1
group = 2
cccversion = 2.3.0
ccckeepalive = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Der Reader Easymouse in rot läuft

oscam srvid ist leer



oscam user

Spoiler

[account]
user = dvbapiau
pwd =
group = 1,2,3,4,5 1,2
uniq = 3
au = 1

bei pwd habe ich nichts eingetragen. Ich habe nur ein Password beim Reader der Easymouse

In rot wurde von mir ersetzt.

1) Bei der dvbapi habe ich auch schon versucht alles raus zu löschen.
2) Die V13 wurde auch geblockt und HD01 wurde nicht hell.

 

[Verdi-Fan]

AW: Ist der OS2+ eine gute Entscheidung und was läuft drauf?

Das kommt, weil du deine komischen Dateien in die sauberen Vorlagen hineinkopiert hast.
Die HD+ kann nicht hell werden, wenn enable = 0
eingestellt ist. Das hatte ich aber mindestens 2 oder 3x geschrieben, dass die jeweiligen Reader dann auf enable = 1
gesetzt werden müssen, wenn sie die Karte benutzen sollen.
Und wenn du bitte in der Oscam.user dein passwort einträgst ...
Die Group 3,4,5 kannst du dann in der User löschen, weil die nicht benötigt werden.
Eleganter hätte ich es ja auch gefunden, wenn du den Reader benutzt hättest, der bereits für protocol = cccam vorgesehen ist. Aber egal ...
Viel Erfolg weiterhin beim Nichtlesen der Hinweise, die dir gegeben werden.
Aber da du ja sowieso eine "Doppelberatung" hast, kann ja nicht viel passieren:
Weiter geht es also hier: https://www.digital-eliteboard.com/390129-welche-oscam-fuer-optimuss-os2-plus-6.html

Grüße
VF

 

[Eliteedi]

AW: Ist der OS2+ eine gute Entscheidung und was läuft drauf?

Hallo guten Morge.
Nein das ist mein Fehler. Der Reader steht natürlich auf Enable 1
Du hattest von mir verlangt das ich die ganzen Dateien die aus dem Feed sind hier posten soll.
Habe ich gemacht, habe dann aber nur in rot Markiert welchen Reader ich benutze aber vergessen die o weg zu machen und eine 1 zu schreiben.
Du schreibst in der User immer das Passwort eintragen. Ich verstehe das nicht welches Passwort ??
Ich habe doch auf dem Receiver kein Passwort eingetragen. Wo wird dieses verlangte Passwort denn abgefragt. Oder muss da irgent ein rein. Deshalb frag ich ja weil ich
Hilfe brauche.
Bei den User habe ich doch nur 1,2 drin. WEnn Du dann auch richtig gelesen hast steht es doch von mir das ich in rot geändert habe.
Zum Reader. Du hattes mir doch vorgeschlagen einen von den beiden Reader zu nehmen. reader0 oder reader1. Hätte ich jetzt von mir aus einen anderen Reader genommen,
hättest Du doch wieder ein Grund zu sagen wieder nicht das genommen was ich geschrieben habe.

Ich finde Unfähr von DIR wenn DU mir vorwürfe machst in einem anderen Thema zu Antworten und evt auch etwas auszuprobieren weil es bisher leider so nicht geklappt hat.
Ich ziehe ja den Hut davor wie DU versuchst mir zu helfen, aber es ist eben schwierig bei soviel Tipps die sich immer wieder drehen alles richtig zu machen.
Welche komischen Vorlagen von mir meinst Du überhaupt.
Trotzdem vielen Dank für deine Mühe und Geduld mir zu helfen .

 

[Pilot]

AW: Nichts wird hell: V13 und HD+01 nicht.

Hast die configs im richtigen Pfad: var/keys/oscam_atv?

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

Hallo Pilot
Das ist ein anderer Pfad bei openatv. Da liegen die in /usr/keys/oscam_atv
Wenn ich da auf dem Var Ordner klicke springt alles sofort zurück in dem usr/keys/. Da läßt sich nichts einstellen. Die configs von der V13 liegen auch dort drin und die geht ja.
Aber die sind da drin.

 

[4gx35]

AW: Nichts wird hell: V13 und HD+01 nicht.

in /etc liegt dein startscript oscam.emu,
zum bearbeiten öffnen, darin steht normalerweise auch der config ordner,
ausserdem, wenn du aufs oscamwebif zugreifen kannst, dort unter files-oscam version auch zu finden bei configdir

 

[Pilot]

AW: Nichts wird hell: V13 und HD+01 nicht.

Richtig.
Aber var/keys/oscam_atv geht bei mir auch.

Bitte starte oacam neu und liefer den Logfile vom Start an.
Zu finden im Wi von oscam im Menü unter files, logfile

 

[pehedima]

AW: Nichts wird hell: V13 und HD+01 nicht.

Schon 3 Seiten vollgeschrieben und kein logfile!?

Das ist das allerwichtigste!

Poste die oscam.log vom oscam start an (wie bereits von Pilot gefordert).
Dann sehen wir was los ist und der Fehler ist gleich gefunden.

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

hier mein log file

Spoiler

2015/10/05 11:32:29 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (mipsel-openpli40-linux-gnu-libusb)
2015/10/05 11:32:29 00000000 s (main) System name = Linux
2015/10/05 11:32:29 00000000 s (main) Host name = optimussos2plus
2015/10/05 11:32:29 00000000 s (main) Release = 3.9.7
2015/10/05 11:32:29 00000000 s (main) Version = #1 SMP Sat Sep 5 08:15:41 CEST 2015
2015/10/05 11:32:29 00000000 s (main) Machine = mips
2015/10/05 11:32:30 00000000 s (main) Stb model = dm8000
2015/10/05 11:32:30 00000000 s (main) Stb vumodel = vusolo2
2015/10/05 11:32:30 00000000 s (main) Stb boxtype = dm8000
2015/10/05 11:32:30 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 495
2015/10/05 11:32:30 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/10/05 11:32:30 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/10/05 11:32:30 00000000 s (main) signal handling initialized
2015/10/05 11:32:30 00000000 s (config) 155 service-id's loaded in 3 ms
2015/10/05 11:32:30 00000000 s (net) cccam: initialized (fd=5, port=12000)
2015/10/05 11:32:30 00000000 s (reader) reader0_hd+_hd01 [internal] creating thread for device /dev/sci0
2015/10/05 11:32:30 00000000 s (reader) easymouse [cccam] creating thread for device 192.168.178.48
2015/10/05 11:32:30 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/10/05 11:32:30 00000000 s (main) waiting for local card init
2015/10/05 11:32:30 14BBB928 r (reader) reader0_hd+_hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.68 MHz)
2015/10/05 11:32:30 14BBB928 r (reader) reader0_hd+_hd01 [internal] Reader sci internal, detected box type: dm8000
2015/10/05 11:32:30 4296D733 p (reader) 192.168.178.48: resolved ip=192.168.178.48
2015/10/05 11:32:30 4296D733 p (reader) easymouse [cccam] connecting to 192.168.178.48:13468
2015/10/05 11:32:30 4296D733 p (reader) easymouse [cccam] proxy initialized, server 192.168.178.48:13468
2015/10/05 11:32:30 6E40C9F1 h (webif) webif: decompressed 164060 bytes back into 392536 bytes
2015/10/05 11:32:30 6E40C9F1 h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2015/10/05 11:32:31 14BBB928 r (reader) reader0_hd+_hd01 [internal] card detected
2015/10/05 11:32:32 14BBB928 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 11:32:32 14BBB928 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 11:32:32 14BBB928 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 11:32:32 14BBB928 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 973
2015/10/05 11:32:32 14BBB928 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 11:32:33 14BBB928 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 11:32:34 14BBB928 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
2015/10/05 11:32:35 14BBB928 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 11:32:37 14BBB928 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 11:32:37 14BBB928 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 11:32:37 14BBB928 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 11:32:37 14BBB928 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 11:32:37 14BBB928 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 48
2015/10/05 11:32:38 14BBB928 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 11:32:39 14BBB928 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 11:32:40 14BBB928 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 11:32:41 14BBB928 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 11:32:42 14BBB928 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 11:32:42 14BBB928 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 11:32:42 14BBB928 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 11:32:42 14BBB928 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 56
2015/10/05 11:32:43 14BBB928 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 11:32:44 14BBB928 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 11:32:44 14BBB928 r (reader) reader0_hd+_hd01 [internal] card system not supported
2015/10/05 11:32:44 14BBB928 r (reader) reader0_hd+_hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2015/10/05 11:32:45 14BBB928 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 11:32:45 14BBB928 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 11:32:45 14BBB928 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/10/05 11:32:45 14BBB928 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 48
2015/10/05 11:32:46 14BBB928 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 11:32:46 14BBB928 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 11:32:47 14BBB928 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
2015/10/05 11:32:49 14BBB928 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 11:32:50 14BBB928 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 11:32:51 14BBB928 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 11:32:51 14BBB928 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 11:32:51 14BBB928 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 11:32:51 14BBB928 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 46
2015/10/05 11:32:51 14BBB928 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 11:32:52 14BBB928 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 11:32:54 14BBB928 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 11:32:55 14BBB928 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 11:32:56 14BBB928 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 11:32:56 14BBB928 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 11:32:56 14BBB928 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/10/05 11:32:56 14BBB928 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 47
2015/10/05 11:32:56 14BBB928 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 11:32:57 14BBB928 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 11:32:57 14BBB928 r (reader) reader0_hd+_hd01 [internal] card system not supported
2015/10/05 11:32:57 14BBB928 r (reader) reader0_hd+_hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/10/05 11:32:57 14BBB928 r (reader) reader0_hd+_hd01 [internal] card initializing error
2015/10/05 11:32:58 00000000 s (main) init for all local cards done
2015/10/05 11:32:58 00000000 s (anticasc) anti cascading disabled
2015/10/05 11:32:58 5D0A2508 c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))
2015/10/05 11:32:58 5D0A2508 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1FCC PROVID: 000000
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in PMT
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
2015/10/05 11:32:58 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:32:58 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:161D8F870743CA80B484234F9CDC790F): not found (150 ms) by easymouse
2015/10/05 11:32:59 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:32:59 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:32:59 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:161D8F870743CA80B484234F9CDC790F): not found (2 ms) by easymouse
2015/10/05 11:33:00 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:33:00 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:33:00 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:161D8F870743CA80B484234F9CDC790F): not found (1 ms) by easymouse
2015/10/05 11:33:01 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:33:01 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:33:01 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (2 ms) by easymouse
2015/10/05 11:33:02 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (1 ms) by easymouse
2015/10/05 11:33:02 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:33:02 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:33:03 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (1 ms) by easymouse
2015/10/05 11:33:03 5D0A2508 c (-) -- Skipped 1 duplicated log lines --
2015/10/05 11:33:03 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:33:03 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:33:04 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (1 ms) by easymouse
2015/10/05 11:33:05 5D0A2508 c (-) -- Skipped 1 duplicated log lines --
2015/10/05 11:33:05 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:33:05 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:33:05 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (1 ms) by easymouse
2015/10/05 11:33:06 5D0A2508 c (-) -- Skipped 1 duplicated log lines --
2015/10/05 11:33:06 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:33:06 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:33:06 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (1 ms) by easymouse
2015/10/05 11:33:07 5D0A2508 c (-) -- Skipped 1 duplicated log lines --
2015/10/05 11:33:07 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:33:07 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:33:08 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (1 ms) by easymouse
2015/10/05 11:33:08 5D0A2508 c (-) -- Skipped 1 duplicated log lines --
2015/10/05 11:33:08 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 11:33:08 5D0A2508 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 11:33:09 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (2 ms) by easymouse
2015/10/05 11:33:09 5D0A2508 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:CB7C5B8B4FF449A759D8C3481CAA87E5): rejected (1 ms) by easymouse
2015/10/05 11:33:10 5D0A2508 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!

Hallo Pilot. Muss ich den vielleicht noch ordner Var vielleicht noch frei geben. Da kommt auch von der v13 kein Emm rein was auf dem VIP noch geklappt hat.

- - - - - - - - - -

in /etc liegt dein startscript oscam.emu,
zum bearbeiten öffnen, darin steht normalerweise auch der config ordner,
ausserdem, wenn du aufs oscamwebif zugreifen kannst, dort unter files-oscam version auch zu finden bei configdir

Ja den habe ich und da ist emuname = oscam_atv 1.2 10998
binname = oscam_atv
startcam = /usr/bin/oscam_atv -b -r 2 -c /usr/keys/oscam_atv
stopcam = killall -9 oscam_atv
eingetragen

- - - - - - - - - -

Hallo Danke an alle die mir helfen. Bin in 3 Stunden wieder am Ball und werde Eure Tipps weiter versuchen.
LG
Eliteedi

 

[pehedima]

AW: Nichts wird hell: V13 und HD+01 nicht.

Deine HD+ Karte wird nicht gelesen.

Ändere mal den Reader wie folgt:

autospeed = 0
mhz = 357
cardmhz = 357

Bitte auch darauf achten, dass im Parameter boxkey und rsakey keine Leerzeichen enthalten sein dürfen.

Danach die gesamte Kiste neu starten und erneut die oscam.log vom oscam start an posten.

 

[Eliteedi]

AW: Nichts wird hell: V13 und HD+01 nicht.

So bin wieder zu Hause.

Im Reader habe ich deine Daten reingemacht.
Leerzeichen sind keine vorhanden.

Hier der neu LOG

Spoiler

2015/10/05 14:55:29 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (mipsel-openpli40-linux-gnu-libusb)
2015/10/05 14:55:29 00000000 s (main) System name = Linux
2015/10/05 14:55:29 00000000 s (main) Host name = optimussos2plus
2015/10/05 14:55:29 00000000 s (main) Release = 3.9.7
2015/10/05 14:55:29 00000000 s (main) Version = #1 SMP Sat Sep 5 08:15:41 CEST 2015
2015/10/05 14:55:29 00000000 s (main) Machine = mips
2015/10/05 14:55:29 00000000 s (main) Stb model = dm8000
2015/10/05 14:55:29 00000000 s (main) Stb vumodel = vusolo2
2015/10/05 14:55:29 00000000 s (main) Stb boxtype = dm8000
2015/10/05 14:55:29 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 495
2015/10/05 14:55:29 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/10/05 14:55:29 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/10/05 14:55:29 00000000 s (main) signal handling initialized
2015/10/05 14:55:29 00000000 s (config) 155 service-id's loaded in 3 ms
2015/10/05 14:55:29 00000000 s (net) cccam: initialized (fd=5, port=12000)
2015/10/05 14:55:29 00000000 s (reader) reader0_hd+_hd01 [internal] creating thread for device /dev/sci0
2015/10/05 14:55:29 00000000 s (reader) easymouse [cccam] creating thread for device 192.168.178.48
2015/10/05 14:55:29 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/10/05 14:55:29 00000000 s (main) waiting for local card init
2015/10/05 14:55:29 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
2015/10/05 14:55:29 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Reader sci internal, detected box type: dm8000
2015/10/05 14:55:29 50E73515 p (reader) 192.168.178.48: resolved ip=192.168.178.48
2015/10/05 14:55:29 50E73515 p (reader) easymouse [cccam] connecting to 192.168.178.48:13468
2015/10/05 14:55:29 50E73515 p (reader) easymouse [cccam] proxy initialized, server 192.168.178.48:13468
2015/10/05 14:55:29 300CD2DF h (webif) webif: decompressed 164060 bytes back into 392536 bytes
2015/10/05 14:55:29 300CD2DF h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2015/10/05 14:55:30 4600E9A0 r (reader) reader0_hd+_hd01 [internal] card detected
2015/10/05 14:55:31 4600E9A0 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 14:55:31 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 14:55:31 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2015/10/05 14:55:31 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 931
2015/10/05 14:55:32 4600E9A0 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 14:55:33 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 14:55:34 4600E9A0 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
2015/10/05 14:55:35 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 14:55:36 4600E9A0 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 14:55:37 4600E9A0 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 14:55:37 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 14:55:37 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2015/10/05 14:55:37 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 47
2015/10/05 14:55:38 4600E9A0 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 14:55:39 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 14:55:40 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 14:55:41 4600E9A0 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 14:55:42 4600E9A0 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 14:55:42 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 14:55:42 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 8.31 us reader mhz = 385
2015/10/05 14:55:42 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 43
2015/10/05 14:55:43 4600E9A0 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 14:55:44 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 14:55:44 4600E9A0 r (reader) reader0_hd+_hd01 [internal] card system not supported
2015/10/05 14:55:44 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2015/10/05 14:55:45 4600E9A0 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 14:55:45 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 14:55:45 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 110.39 us reader mhz = 337
2015/10/05 14:55:45 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 43
2015/10/05 14:55:45 4600E9A0 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 14:55:46 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 14:55:47 4600E9A0 r (reader) reader0_hd+_hd01 [internal] detect native nagra card
2015/10/05 14:55:48 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 14:55:50 4600E9A0 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 14:55:51 4600E9A0 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 14:55:51 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 14:55:51 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 9.50 us reader mhz = 337
2015/10/05 14:55:51 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 46
2015/10/05 14:55:51 4600E9A0 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 14:55:52 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 14:55:53 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/10/05 14:55:55 4600E9A0 r (reader) reader0_hd+_hd01 [internal] T1 Resync command error, trying to reactivate!
2015/10/05 14:55:56 4600E9A0 r (reader) reader0_hd+_hd01 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/10/05 14:55:56 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/10/05 14:55:56 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Calculated work ETU is 9.50 us reader mhz = 337
2015/10/05 14:55:56 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Buffers readed 0 bytes total time_us 44
2015/10/05 14:55:56 4600E9A0 r (reader) reader0_hd+_hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.37 Mhz (nearest possible mhz specified reader->mhz)
2015/10/05 14:55:57 4600E9A0 r (reader) reader0_hd+_hd01 [internal] Warning: Card returned error on setting ifsd value to 251
2015/10/05 14:55:57 4600E9A0 r (reader) reader0_hd+_hd01 [internal] card system not supported
2015/10/05 14:55:57 4600E9A0 r (reader) reader0_hd+_hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/10/05 14:55:57 4600E9A0 r (reader) reader0_hd+_hd01 [internal] card initializing error
2015/10/05 14:55:58 00000000 s (main) init for all local cards done
2015/10/05 14:55:58 00000000 s (anticasc) anti cascading disabled
2015/10/05 14:55:58 2A117BA2 c (client) plain dvbapi-client granted (dvbapiau, au=auto (2 reader))
2015/10/05 14:55:58 2A117BA2 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1FCC PROVID: 000000
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 found 6 ECMpids and 7 STREAMpids in PMT
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 serving srvid EF10 (RTL HD) on adapter 0000 camask 0001 index 0000 pmtpid 0060
2015/10/05 14:55:58 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:55:58 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:4530E2618A054753C8C754FACC693BA7): not found (150 ms) by easymouse
2015/10/05 14:55:59 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:55:59 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:55:59 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:4530E2618A054753C8C754FACC693BA7): not found (1 ms) by easymouse
2015/10/05 14:56:00 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:56:00 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:56:00 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:4530E2618A054753C8C754FACC693BA7): not found (1 ms) by easymouse
2015/10/05 14:56:01 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 1 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:56:01 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:56:01 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (1 ms) by easymouse
2015/10/05 14:56:02 2A117BA2 c (-) -- Skipped 1 duplicated log lines --
2015/10/05 14:56:02 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:56:02 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:56:03 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (1 ms) by easymouse
2015/10/05 14:56:03 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (2 ms) by easymouse
2015/10/05 14:56:03 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:56:03 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:56:04 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (1 ms) by easymouse
2015/10/05 14:56:04 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (2 ms) by easymouse
2015/10/05 14:56:05 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:56:05 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:56:05 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (1 ms) by easymouse
2015/10/05 14:56:06 2A117BA2 c (-) -- Skipped 1 duplicated log lines --
2015/10/05 14:56:06 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:56:06 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:56:06 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (1 ms) by easymouse
2015/10/05 14:56:07 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (2 ms) by easymouse
2015/10/05 14:56:07 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:56:07 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:56:08 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (1 ms) by easymouse
2015/10/05 14:56:08 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (2 ms) by easymouse
2015/10/05 14:56:08 2A117BA2 c (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 5 disabled ecmpids!
2015/10/05 14:56:08 2A117BA2 c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2015/10/05 14:56:09 2A117BA2 c (ecm) dvbapiau (09C4@000000/0641/EF10/B3:824F069F7381DBE01979348E121C152E): rejected (1 ms) by easymouse

 

[Pilot]

AW: Nichts wird hell: V13 und HD+01 nicht.

Die HD+ Karte wird wieder nicht richtig eingelesen:
2015/10/05 14:55:57 4600E9A0 r (reader) reader0_hd+_hd01 [internal] card system not supported
2015/10/05 14:55:57 4600E9A0 r (reader) reader0_hd+_hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
Sarte den Receiver mal neu
Und liefer den Log nochmal ab.

Aber von der V13 Karte ist im Log überhapt nichts zu sehen