Hallo
ich versuch seit ein paar tagen meinen NewCS-Server ans laufen zu bringen.
Leider sagt mir der NewCS „Unknown card“
Aber die dbox2 loggt sich am NewCS ein
Ich benutze einen Ubuntu Server und ne dbox2 als Client
Hier sind mal ein paar daten:
Sky/Premiere Abokarte S02
-=Server=-
Aktueller Ubuntu Server
NewCS Version: 1.67 RC1 [Build: 95]
Kartenleser Infinity USB Unlimited
Ich Starte momentan mit:
modprobe iuu-phoenix clockmode=3
newcs start
newcs.xml
/var/log/vdr/newcs.log
-=Client=-
Dbox2 BluePeer 1.2.1
MGCamd Ver 1.31
newcamd.conf
hat jemand eine Idee was mir fehlt bzw falsch ist
Gruß Tom
ich versuch seit ein paar tagen meinen NewCS-Server ans laufen zu bringen.
Leider sagt mir der NewCS „Unknown card“
Aber die dbox2 loggt sich am NewCS ein
Ich benutze einen Ubuntu Server und ne dbox2 als Client
Hier sind mal ein paar daten:
Sky/Premiere Abokarte S02
-=Server=-
Aktueller Ubuntu Server
NewCS Version: 1.67 RC1 [Build: 95]
Kartenleser Infinity USB Unlimited
Sie müssen registriert sein, um Links zu sehen.
Ich Starte momentan mit:
modprobe iuu-phoenix clockmode=3
newcs start
newcs.xml
Code:
<newCSconfig>
<readers name="Infinity Usb Unlimited">
<device>
<name>Infinity Usb Unlimited</name>
<name>phoenix</name>
<mhz>600</mhz>
<node>/dev/ttyUSB0</node>
<infinity_number>0</infinity_number>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>yes</carddetect>
<cardlevel>0</cardlevel>
<newcamd_port>15050</newcamd_port>
<autosid>Yes</autosid>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>10001</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>normal</level>
<type>all</type>
<output>file</output>
<logfile>/var/log/vdr/newcs/newcs.log</logfile>
<file_options>all</file_options>
<tcp_port>8081</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><name>newcs</name><password>newcs</password><hostname></hostname><port></port><au>yes</au><spider>yes</spider><sidoverride>yes</sidoverride><rate>0</rate></user><user><name>test</name><password>test</password><hostname></hostname><port></port><au>yes</au><spider>yes</spider><sidoverride>yes</sidoverride><rate>0</rate></user> <user>
<name>danny</name>
<password>dummy</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<cardlevel>1</cardlevel>
</user>
</newcamdserver>
<chameleon2>
<server>
<port>1234</port>
<enabled>no</enabled>
<realm>myShares</realm>
</server>
<peer>
<hostname>remote</hostname>
<port>1234</port>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</peer>
<user>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
Code:
[ 14:05:38 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 14:05:38 ] [ Config ] Option <type> for device 0 (Infinity Usb Unlimited) not present, defaulting to Phoenix
[ 14:05:38 ] [ Config ] Option <blockc0> for device 0 (Infinity Usb Unlimited) not present, defaulting to NO
[ 14:05:38 ] [ Config ] Option <crypto-special> for device 0 (Infinity Usb Unlimited) not present, defaulting to NO
[ 14:05:38 ] [ Config ] Option <PTShandshake> for device 0 (Infinity Usb Unlimited) not present, defaulting to NO
[ 14:05:38 ] [ Config ] Option <Seca-PPV> for device 0 (Infinity Usb Unlimited) not present, defaulting to NO
[ 14:05:38 ] [ Config ] Pincode for device 0 (Infinity Usb Unlimited): 0000
[ 14:05:38 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 14:05:38 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myShares) on port 1234 - 0x9d810e0 [ op pt$
[ 14:05:38 ] [ Newcamd ] Server name : newcs
[ 14:05:38 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 14:05:38 ] [ Newcamd ] User 2: newcs, Pass: newcs, Host , Port: 0, Au: On, Spider allowed: Yes, Sidoverride: Yes, lev$
[ 14:05:38 ] [ Newcamd ] User 3: danny, Pass: dummy, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, l$
[ 14:05:38 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 14:05:38 ] [ EMM Cache ] Initialising dynamic Cache
[ 14:05:38 ] [ ECM Cache ] Initialising dynamic Cache
[ 14:05:38 ] [ Loader ] Starting Telnet on port 0
[ 14:05:38 ] [ Loader ] Started HTTP-server on port: 8080
[ 14:05:38 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 14:05:38 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 14:05:38 ] [ Phoenix ] Setting Parity to: ODD
[ 14:05:38 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 14:05:38 ] [ Phoenix ] Setting Baud to custom 16129
[ 14:05:39 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 14:05:40 ] [ Loader ] Unknown card
[ 14:05:40 ] [ Loader ] Trying Ird** (T=14)
[ 14:05:40 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 14:05:43 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 14:05:43 ] [ Phoenix ] Could not get device /dev/ttyUSB0
[ 14:05:43 ] [ Loader ] Reset failed ...
[ 14:05:43 ] [ Loader ] Starting Newcamd Server on port 15050
[ 14:05:43 ] [ Newcamd ] Newcamd thread Server started on port 15050
[ 14:05:43 ] [ NewCS ] Ready to GO! :)
[ 14:06:00 ] [ httpd ] User newcs logged in..
[ 14:12:16 ] [ Newcamd:15050 ] Connection from 192.168.1.6
[ 14:12:17 ] [ Newcamd:15050 ] User newcs logged in, client: MgcamdDbox2 BluePeer 1.2.1
MGCamd Ver 1.31
newcamd.conf
Code:
EMU = yes
PREFER_EMU = yes
AU = yes
OSD_TIMEOUT = 0
OSD_WEB_LOGIN = root:dbox2
SHOW_ALL_CA_SYSTEMS = no
DEBUG_ECM = yes
DEBUG_EMM = no
DEBUG_CWS = no
DEBUG_CAM = no
SHOW_PAT = no
SHOW_PMT = no
SHOW_ECM = no
SHOW_CAT = no
SHOW_EMM = no
SHOW_CWS_ECM = no
SHOW_CWS_EMM = no
EMM_REPORT_WRONG_SIG = yes
DEFAULT_CW_DELAY = 500
RELOAD_CONFIG_ON_ZAP = no
RELOAD_KEYLIST_ON_ZAP = no
CA_INFO_FILE = /tmp/cainfo.txt
CWS = uds 0 local local
CWS = uds 1 local local
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_DEBUG_PORT = 12001
CWS_KEEPALIVE = no
ADMIN_PASSWORD = test 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CWS = 192.168.1.225 15050 newcs newcs 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Code:
/var/emu # ./mgcamd
tuxbox mgcamd v1.31 by mixvt (compiled Oct 29 2008 19:10:52)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:3:172.16.1.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dbox2
/var/emu # Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = newcs:192.168.1.225:15050
newcamd keep alive: 0, incoming port: 12000
[mgcam] emm thread started
[mgcamd] tps update started.
/var/keys/tps.bin error 2: No such file or directory
[newcamd] Connecting to 192.168.1.225:15050...
[newcamd] Login to 192.168.1.225:15050 as newcs accepted (0ms)
[newcamd] Card data from 192.168.1.225:15050 (19ms):
EMM enabled: UA yes SA yes GA yes, Card serial: 0
Userid 1 caid 0 providers 1
Idents: 000000
ids: 0Gruß Tom
