AW: Newcs Server mit Nagra3+Smargo unter XP?
Moin Kollogens,
ich versuche auch gerade die NewCS unter Win Xp ans laufen zu bekommen.
D02 Karte (Kabel Deutschland) mit MasterCRD 2 an COM 1
Meine newcs.xml sieht wie folgt aus:
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around
)
-->
<newCSconfig>
<readers name="Card Readers">
<device>
<name>Phoenix com1</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>COM1</node>
<parity>none</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>No</carddetect>
<newcamd_port>10001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>No</Seca-PPV>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<!-- valid value for enable are:
0,1 - Enable or Disable radegast server. -->
<enabled>no</enabled>
<!-- valid value for port are:
0,65535 - Which port to listen for incomming connections. -->
<port>10002</port>
<!-- valid value for allow are:
ALL - Not active yet. -->
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>100</emm>
<ecm>100</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile>logfile.txt</logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.0.190</udp_host>
<udp_port>10001</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>Cardsharing Server</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>root</name>
<password>dbox2</password>
<au>on</au>
<spider>no</spider>
</user>
<user>
<name>user2</name>
<password>pass2</password>
<au>on</au>
<spider>no</spider>
</user>
<user>
<name>user3</name>
<password>pass3</password>
<au>on</au>
<spider>no</spider>
</user>
<user>
<name>user4</name>
<password>pass4</password>
<au>on</au>
<spider>no</spider>
</user>
<!-- Remove if you dont use reverse login
<user>
<name>User5</name>
<password>Pass5</password>
<hostname>localhost</hostname>
<port>12345</port>
<spider>yes</spider>
</user>
-->
</newcamdserver>
</newCSconfig>
In der Logdatei erscheint folgende Meldung:
[ 20:17:39 ] [ Box detect ] Windows XP Build 2600
[ 20:17:39 ] [ Config ] Option <blockc0> for device 0 (Phoenix com1) not present, defaulting to NO
[ 20:17:39 ] [ Config ] COM1 ECM priority: round
[ 20:17:39 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:17:39 ] [ ECM Cache ] Initialising dynamic Cache
[ 20:17:39 ] [ Loader ] Starting Telnet on port 3001
[ 20:17:39 ] [ Loader ] Reader type 2 on node COM1
[ 20:17:39 ] [ Phoenix ] Opening device COM1
[ 20:17:39 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 20:17:39 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 20:17:39 ] [ Phoenix ] Setting baud to 16457
[ 20:17:41 ] [ Loader ] Unknown card
[ 20:17:41 ] [ Loader ] Trying Irdeto (T=14)
[ 20:17:41 ] [ Loader ] Reader type 2 on node COM1
[ 20:17:41 ] [ Phoenix ] Opening device COM1
[ 20:17:41 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 20:17:41 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 20:17:41 ] [ Phoenix ] Setting baud to 9600
[ 20:17:43 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 20:17:43 ] [ ATR ] Historical bytes: I R D E T O A C S [ 20:17:43 ] [ Loader ] Init Irdeto card
[ 20:17:43 ] [ Phoenix ] Setting parity to NONE on node COM1
[ 20:17:43 ] [ Phoenix ] Setting 2 Stop bits on node COM1
[ 20:17:43 ] [ Phoenix ] Setting baud to 9600
[ 20:17:43 ] [ Keyman ] Adding key XXXXXX type 0 on Provider 000000 for caid 1722 ID=0
[ 20:17:43 ] [ Keyman ] Adding key XXXXXX type 1 on Provider 000000 for caid 1722 ID=0
[ 20:17:43 ] [ Keyman ] Skipping duplicate irdeto
[ 20:17:43 ] [ Keyman ] Adding key XXXXXX type 1 on Provider 000001 for caid 1722 ID=1
[ 20:17:43 ] [ Keyman ] Skipping duplicate irdeto
[ 20:17:43 ] [ Keyman ] Adding key XXXXXX type 1 on Provider 000002 for caid 1722 ID=2
[ 20:17:43 ] [ Keyman ] Skipping duplicate irdeto
[ 20:17:43 ] [ Keyman ] Adding key XXXXXX type 1 on Provider 000003 for caid 1722 ID=3
[ 20:17:44 ] [ Loader ] Card 1722 on port COM1 failed
[ 20:17:44 ] [ Loader ] Starting Newcamd Server on port 10001
[ 20:17:44 ] [ Newcamd ] Newcamd thread Server started on port 10001
[ 20:17:47 ] [ Newcamd:10001 ] User root logged in, client: CCcam
[ 20:17:47 ] [ Newcamd:10001 ] Connection from root to not-ready server!
Die Keys habe ich mal mit XXXXXX versehen, Reader ist ein MasterCRD2 am Com1.
Komisch ist nur die Meldung: [ 20:17:44 ] [ Loader ] Card 1722 on port COM1 failed
Nur warum ? Vielleicht kann mir eienr von Euch weiterhelfen !?
Gruß
Klo
