Newcs Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

chr73 · 4. April 2009

Hallo, ich suche schon eine Weile, finde aber keine Lösung für mein Problem mit Newcs/CCcam.

Ausgangssituation:
Server: Linux PC (Kernel 2.4.37) mit Smargo (Firmware 1.03) an USB-Schnittstelle, Newcs 1.61, S02-Karte.
Client: dbox2 mit CCcam 2.0.11

newcs.xml:

<?xml version="1.0"?>

<newCSconfig>

<readers name="Card Readers">
<device>
<name>Smargo</name>
<type>phoenix</type>
<node>/dev/ttyUSB0</node>
<mhz>600</mhz>
<parity>none</parity>
<reset>normal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<irdetomode>0</irdetomode>
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
<blockc0>Yes</blockc0>
<carddetect>no</carddetect>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<newcamd_port>15000</newcamd_port>
<Seca-PPV>no</Seca-PPV>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>

<radegastserver>
<enabled>no</enabled>
<port>10001</port>
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>

<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>

<debug>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<logfile></logfile>
<console_options>normal,init</console_options>
<file_options></file_options>
<udp_host></udp_host>
<udp_port></udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>

<newcamdserver>
<enabled>yes</enabled>
<name>NewCamdServer</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>dummy</name>
<password>dummy</password>
<au>on</au>
<spider>no</spider>
</user>
</newcamdserver>

</newCSconfig>

In CCcam.cfg steht:

N: 192.168.4.99 15000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Newcs auf dem Server startet mit folgender Ausgabe:

This is NewCS 1.61 - the New CardServer by the Butter-team..
Compiled on Aug 17 2008 at 21:59:26
Reading Config file from /var/etc/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 13:45:51 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 13:45:51 ] [ Config ] Irdeto EMM mode 0 SET on reader Smargo
[ 13:45:51 ] [ Config ] /dev/ttyUSB0 ECM priority: round
[ 13:45:51 ] [ EMM Cache ] Initialising dynamic Cache
[ 13:45:51 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 7119
[ 13:45:51 ] [ Loader ] Starting Telnet on port 3001
[ 13:45:51 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 13:45:51 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 13:45:51 ] [ Phoenix ] Setting Parity to: NONE
[ 13:45:51 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 13:45:51 ] [ Phoenix ] Setting Baud to custom 16129
[ 13:45:52 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 13:45:54 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 13:45:54 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 13:45:54 ] [ Loader ] Init Irdeto card
[ 13:45:54 ] [ Phoenix ] Setting Parity to: NONE
[ 13:45:54 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 13:45:54 ] [ Phoenix ] Setting Baud to standard 9600
[ 13:45:57 ] [ Keyman ] Adding key ****** type 0 on Provider 000000 for caid 1702 ID=0
[ 13:45:57 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000000 for caid 1702 ID=0
[ 13:45:58 ] [ Keyman ] Skipping duplicate irdeto
[ 13:45:58 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000001 for caid 1702 ID=1
[ 13:45:58 ] [ Keyman ] Skipping duplicate irdeto
[ 13:45:58 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000002 for caid 1702 ID=2
[ 13:45:58 ] [ Keyman ] Skipping duplicate irdeto
[ 13:45:58 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000003 for caid 1702 ID=3
[ 13:46:00 ] [ Loader ] Card 1702 on port /dev/ttyUSB0 ready
[ 13:46:00 ] [ Loader ] Starting Newcamd Server on port 15000
[ 13:46:00 ] [ Newcamd ] Newcamd thread Server started on port 15000
[ 13:46:00 ] [ NewCS ] Ready to GO!

CCcam auf der dbox2 startet mit folgender Ausgabe:

13:46:13.538 CCcam: ======================================================================
13:46:13.546 CCcam: starting CCcam 2.0.11 compiled on Dec 3 2008@20:54:02
13:46:13.547 CCcam: ======================================================================
13:46:13.550 CCcam: online using nodeId 7b5462eaadcb6fae
13:46:13.587 CCcam: Server disabled
13:46:13.629 CCcam: dvb api3 detected
13:46:13.635 CCcam: create 1 cam device(s)
13:46:13.652 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
13:46:13.654 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
13:46:13.656 CCcam: static cw not found or bad
13:46:13.664 CCcam: parsed 0 entries from /var/etc/CCcam.prio
13:46:13.666 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
13:46:13.668 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
13:46:13.736 CCcam: newcamd server 192.168.4.99:15000 user: dummy
13:46:13.764 CCcam: newcamd caid 1702 providers 4 userid: 0
13:46:13.766 CCcam: newcamd card serial: ********
13:46:13.769 CCcam: newcamd prov 00 000000 00ffffff
13:46:13.771 CCcam: newcamd prov 01 000001 00ffffff
13:46:13.773 CCcam: newcamd prov 02 000002 00ffffff
13:46:13.774 CCcam: newcamd prov 03 000003 00ffffff
13:46:13.802 CCcam: cam[0] set PMT for sid=384

Newcs auf dem Server reagiert daraufhin mit:

[ 13:46:13 ] [ Newcamd:15000 ] User dummy logged in, client: CCcam

Schalte ich jetzt auf einen P******* Kanal meldet Newcs auf dem Server:

[ 13:46:23 ] [ Loader ] Reinit card with caid 1702
[ 13:46:23 ] [ Loader ] Reader type 2 on node /dev/ttyUSB0
[ 13:46:23 ] [ Phoenix ] Opening device /dev/ttyUSB0
[ 13:46:23 ] [ Phoenix ] Setting Parity to: NONE
[ 13:46:23 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 13:46:23 ] [ Phoenix ] Setting Baud to standard 9600
[ 13:46:23 ] [ Phoenix ] Normal RESET on node /dev/ttyUSB0
[ 13:46:24 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 13:46:24 ] [ ATR ] Historical bytes: I R D E T O A C S [03] [84] U [FF] [80]
[ 13:46:24 ] [ Loader ] Init Irdeto card
[ 13:46:24 ] [ Phoenix ] Setting Parity to: NONE
[ 13:46:24 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyUSB0
[ 13:46:24 ] [ Phoenix ] Setting Baud to standard 9600
[ 13:46:28 ] [ Newcamd:15000 ] User dummy logout
[ 13:46:28 ] [ Newcamd:15000 ] User dummy logged in, client: CCcam
[ 13:46:29 ] [ Newcamd:15000 ] User dummy logout

...und CCcam auf der dbox2:

13:46:23.136 CCcam: found betacrypt caid: 0x1702 ecmpid: 0x1742 id: 0x0
13:46:23.137 CCcam: found betacrypt caid: 0x1722 ecmpid: 0x1c43 id: 0x0
13:46:23.139 CCcam: found nagra caid: 0x1837 ecmpid: 0x1a42 id: 0x0
13:46:23.140 CCcam: found nagra caid: 0x1833 ecmpid: 0x1842 id: 0x0
13:46:23.141 CCcam: found nagra caid: 0x1834 ecmpid: 0x1c42 id: 0x0
13:46:23.143 CCcam: found nagra caid: 0x1836 ecmpid: 0x1843 id: 0x0
13:46:23.144 CCcam: found nds caid: 0x9c4 ecmpid: 0x1b42 id: 0x0
13:46:23.146 CCcam: cam[0] set PMT for sid=a
13:46:23.604 CCcam: chid 0001
13:46:23.607 CCcam: newcamd ecm -> 192.168.4.99:15000
13:46:27.610 CCcam: newcamd first read failed -1
13:46:27.615 CCcam: newcamd ecm <- 192.168.4.99:15000 connection error
13:46:27.617 CCcam: cam[0] ecm odd nok caid:0x1702 id:0x0 pid:0x1742 Unknown
13:46:28.112 CCcam: chid 0001
13:46:28.113 CCcam: cam[0] ecm even nok caid:0x1702 id:0x0 pid:0x1842 Unknown
13:46:28.611 CCcam: chid 0001
13:46:28.616 CCcam: cam[0] ecm even nok caid:0x1722 id:0x0 pid:0x1c43 Unknown
13:46:28.680 CCcam: newcamd server 192.168.4.99:15000 user: dummy
13:46:28.710 CCcam: newcamd caid 0000 providers 0 userid: 0
13:46:28.712 CCcam: newcamd card serial: 00000000
13:46:28.862 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
13:46:28.863 CCcam: cam[0] ecm odd nok caid:0x1837 id:0x0 pid:0x1a42 Unknown
13:46:29.111 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:46:29.113 CCcam: cam[0] ecm even nok caid:0x1834 id:0x0 pid:0x1c42 Unknown
13:46:29.362 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
13:46:29.363 CCcam: cam[0] ecm even nok caid:0x1836 id:0x0 pid:0x1843 Unknown
13:46:29.862 CCcam: chid 0001
13:46:29.864 CCcam: cam[0] ecm even nok caid:0x1702 id:0x0 pid:0x1742 Unknown
13:46:30.363 CCcam: chid 0001
13:46:30.364 CCcam: cam[0] ecm even nok caid:0x1702 id:0x0 pid:0x1842 Unknown
13:46:30.864 CCcam: chid 0001
13:46:30.865 CCcam: cam[0] ecm even nok caid:0x1722 id:0x0 pid:0x1c43 Unknown
13:46:31.114 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
13:46:31.116 CCcam: cam[0] ecm odd nok caid:0x1837 id:0x0 pid:0x1a42 Unknown
13:46:31.365 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 0) no key
13:46:31.366 CCcam: cam[0] ecm even nok caid:0x1834 id:0x0 pid:0x1c42 Unknown
13:46:31.617 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 0) no key
13:46:31.618 CCcam: cam[0] ecm even nok caid:0x1836 id:0x0 pid:0x1843 Unknown
13:46:32.116 CCcam: chid 0001
13:46:32.117 CCcam: cam[0] ecm even nok caid:0x1702 id:0x0 pid:0x1742 Unknown
...

Hab schon alles mögliche ausprobiert, aber im Moment keine Idee mehr, an was es noch liegen könnte. Kann mir jemand weiterhelfen?
Danke

TNe-DEb · 4. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Als erstes würde ich mal NewCS 1.65 nehmen und dann noch mal testen

weil wenn cccam einem ecm sendet fliegt die verbindung ab.

TNe

chr73 · 4. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

TNe-DEb schrieb:
Als erstes würde ich mal NewCS 1.65 nehmen und dann noch mal testen

weil wenn cccam einem ecm sendet fliegt die verbindung ab.

TNe

Ich habe schon sämtliche Newcs Versionen durchprobiert, auch 1.65. Version 1.61 ist allerdings die einzige, die die Karte auch richtig erkennt. Andere Versionen erkennen die Karte entweder gar nicht oder mit falscher CAID.

TNe-DEb · 4. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Welche Setting hat der Smargo?

Ist Mhz fix oder auto?

chr73 · 4. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Smargo Settings:

MODE autoswitch
FREQ 3.69 Mhz
KERNEL normal
T_MODE t = 0
EGT 0

Wie gesagt, die Smartcard ist eine neue S02. Passen da die 3.69 Mhz überhaupt?

TNe-DEb · 4. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Nein, fix 6 MHz für die S02

chr73 · 4. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Hab jetzt auf MODE fixed 6.00 Mhz gestellt, bekomme aber mit Newcs 1.61, 1.62 und 1.65 immer

...
[ 21:26:14 ] [ Loader ] Unknown card
[ 21:26:14 ] [ Loader ] Trying Irdeto (T=14)
...

chr73 · 5. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Bin jetzt wieder auf MODE autoswitch gegangen und der bleibt auch auf 6.00 Mhz. Damit erkennt zumindest Newcs 1.61 die Karte anscheinend wieder richtig.

Bei der Verbindung vom Client tritt manchmal noch folgende Fehlermeldung auf:

...
des_decrypt: bad checksum ?
[ 00:43:54 ] [ Newcamd:15000 ] Can't decrypt client msg, rejecting!
...

TNe-DEb · 5. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Hallo,

habe das hier mal bei mir nachgebaut

Debian 4.0 (r7 i686) in VMWare und hatte die gleichen Symptonen.

hatte es aber mit Smargo und QNAP TS409 (ARM) am laufen!

Teste mal weiter.

chr73 · 5. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Hier nochmal ein Auszug aus dem Log. Das ist jetzt mit Newcs 1.61 und erscheint bei Verbindung von der dbox2 mit CCcam 2.0.11, mit 1.65 kommen zwar die Fehlermeldungen nicht, die Karte wird aber mit CAID 5303 erkannt. Und dann funktionierts eben auch nicht.
Was bedeuten vor allem die hervorgehobenen Meldungen?

[ 14:36:07 ] [ Newcamd ] new connection from 192.168.4.90 on socket 8
[ 14:36:07 ] [ Newcamd:15000 ] Connection from 192.168.4.90
[ 14:36:07 ] [ Newcamd:15000 ] User dummy logged in, client: CCcam
[ 14:36:07 ] [ Newcamd:15000 ] Sending Card Information to dummy:
[ 14:36:07 ] [ Newcamd ] ProvID 0 Key ****** on caid 1702 type 0
[ 14:36:07 ] [ Newcamd ] ProvID 0 Key FFFFFF on caid 1702 type 1
[ 14:36:07 ] [ Newcamd ] ProvID 1 Key FFFFFF on caid 1702 type 1
[ 14:36:07 ] [ Newcamd ] ProvID 2 Key FFFFFF on caid 1702 type 1
[ 14:36:07 ] [ Newcamd ] ProvID 3 Key FFFFFF on caid 1702 type 1
[ 14:36:13 ] [ Newcamd:15000 ] ECM <- dummy
[ 14:36:13 ] [ SID ] Checking for SID 0011 for Reader 0 (Smargo) - SO is: 0
[ 14:36:13 ] [ Newcamd:15000 ] Accepted SID 0011 on Reader 0 (Smargo) from dummy
[ 14:36:13 ] [ ECM Cache ] Hits 0 Total 1 [CRC 254BB0D2] - returning -999
[ 14:36:13 ] [ 1702 ] Ecm Cache Check took: 0s 1775us [CRC 254bb0d2]
[ 14:36:13 ] [ Card queue /dev/ttyUSB0 ] ECM added, sid 11, prio 4
[ 14:36:13 ] [ Card queue /dev/ttyUSB0 ] Ecm run, sid 11, prio 4, queue len: 1, max len: 1
[ 14:36:13 ] [ ECM Cache ] Hits 0 Total 1 [CRC 254BB0D2] - returning -999
[ 14:36:13 ] [ 1702 ] Ecm Cache Check took: 0s 561us [CRC 254bb0d2]
[ 14:36:13 ] [ Serial ] Write on fd 6 (len=148)
[ 14:36:13 ] [ Serial ] Read on fd 6 (len=148 timeout=1500ms)
[ 14:36:13 ] [ Phoenix ] Echo mismatch
[ 14:36:13 ] [ Irdeto ] First stage Write failed [ 14:36:13 ] [ Irdeto ] ECM i/o err ?
[ 14:36:13 ] [ 1702 ] Card ECM took: 0s 465925us
[ 14:36:13 ] [ Loader ] Reinit card with caid 1702
...

chr73 · 5. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Hab jetzt mal Newcamd auf der dbox2 installiert, hier steht folgendes im Log:

[newcamd-v6.10 16:51:40] compiled Apr 25 2006, 03:58:16
[newcamd-v6.10 16:51:40] Betacrypt smartcard caid 1702
[newcamd-v6.10 16:51:40] loading keys and roms
[newcamd-v6.10 16:51:41] nagra au supports roms: none
[newcamd-v6.10 16:51:41] keys and roms loaded
[newcamd-v6.10 16:51:52] start decoding servid 000a.
[newcamd-v6.10 16:51:52] trying caid 1702, ecm 1742, cam
[newcamd-v6.10 16:51:53] incorrect or invalid smartcard
[newcamd-v6.10 16:51:53] smartcard can't decode
[newcamd-v6.10 16:51:53] can't decode
[newcamd-v6.10 16:51:53] AU started for emm 1000
[newcamd-v6.10 16:51:53] caid 1702, provid 000000, cam
[newcamd-v6.10 16:52:00] stop decoding servid 000a.
[newcamd-v6.10 16:52:00] start decoding servid 7032.
[newcamd-v6.10 16:52:00] not scrambled

Zumindest bringt der Server hier nicht mehr die "Reinit card..." Meldung, aber es funktioniert halt immer noch nicht.

chr73 · 12. April 2009

AW: Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Ich hab den Smargo mit der S02-Karte jetzt mal noch am Notebook getestet (Kernel 2.6). Auch mit Newcs und CCcam-Client. Die Karte wird hier auch nur mit Newcs 1.61 als CAID 1702 erkannt, aber wenigstens kommts beim Zugriff vom CCcam-Client nicht zu "Reinit card...". Funktionieren tut es trotzdem nicht, hier die Auszüge aus den Logs:

Newcs-Server ab da, wo sich der Client verbindet:

[ 19:44:39 ] [ Newcamd ] new connection from 192.168.4.90 on socket 5
[ 19:44:39 ] [ Newcamd:15000 ] Connection from 192.168.4.90
[ 19:44:39 ] [ Newcamd:15000 ] User dummy logged in, client: CCcam
[ 19:44:39 ] [ Newcamd:15000 ] Sending Card Information to dummy:
[ 19:44:39 ] [ Newcamd ] ProvID 0 Key ****** on caid 1702 type 0
[ 19:44:39 ] [ Newcamd ] ProvID 0 Key FFFFFF on caid 1702 type 1
[ 19:44:39 ] [ Newcamd ] ProvID 1 Key FFFFFF on caid 1702 type 1
[ 19:44:39 ] [ Newcamd ] ProvID 2 Key FFFFFF on caid 1702 type 1
[ 19:44:39 ] [ Newcamd ] ProvID 3 Key FFFFFF on caid 1702 type 1
[ 19:44:40 ] [ Newcamd:15000 ] User dummy logout
[ 19:44:52 ] [ Newcamd ] new connection from 192.168.4.90 on socket 5
[ 19:44:52 ] [ Newcamd:15000 ] Connection from 192.168.4.90
[ 19:44:52 ] [ Newcamd:15000 ] User dummy logged in, client: CCcam
[ 19:44:52 ] [ Newcamd:15000 ] Sending Card Information to dummy:
[ 19:44:52 ] [ Newcamd ] ProvID 0 Key ****** on caid 1702 type 0
[ 19:44:52 ] [ Newcamd ] ProvID 0 Key FFFFFF on caid 1702 type 1
[ 19:44:52 ] [ Newcamd ] ProvID 1 Key FFFFFF on caid 1702 type 1
[ 19:44:52 ] [ Newcamd ] ProvID 2 Key FFFFFF on caid 1702 type 1
[ 19:44:52 ] [ Newcamd ] ProvID 3 Key FFFFFF on caid 1702 type 1
[ 19:45:02 ] [ Newcamd:15000 ] EMM <- dummy
[ 19:45:02 ] [ EMM Cache ] Hits 0 Total 1 [CRC 4E3ED0CE] - returning -999
[ 19:45:02 ] [ 1702 ] Emm Cache Check took: 0s 95us [CRC 4e3ed0ce]
[ 19:45:02 ] [ Card queue /dev/ttyUSB0 ] EMM added, sid 1, prio 255
[ 19:45:02 ] [ Card queue /dev/ttyUSB0 ] Emm run, sid 1, prio 255, queue len: 1, max len: 1
[ 19:45:02 ] [ EMM Cache ] Hits 0 Total 1 [CRC 4E3ED0CE] - returning -999
[ 19:45:02 ] [ 1702 ] Emm Cache Check took: 0s 65us [CRC 4e3ed0ce]
[ 19:45:02 ] [ Irdeto ] EMM Update on Beta (GA)
[ 19:45:02 ] [ Newcamd:15000 ] ECM <- dummy
[ 19:45:02 ] [ SID ] Checking for SID 000A for Reader 0 (Phoenix Interface) - SO is: 0
[ 19:45:02 ] [ Newcamd:15000 ] Accepted SID 000A on Reader 0 (Phoenix Interface) from dummy
[ 19:45:02 ] [ ECM Cache ] Hits 0 Total 1 [CRC CB6ACA64] - returning -999
[ 19:45:02 ] [ 1702 ] Ecm Cache Check took: 0s 86us [CRC cb6aca64]
[ 19:45:02 ] [ Card queue /dev/ttyUSB0 ] ECM added, sid A, prio 1
[ 19:45:02 ] [ Serial ] Write on fd 3 (len=145)
[ 19:45:02 ] [ Serial ] Read on fd 3 (len=145 timeout=1621ms)
[ 19:45:02 ] [ Serial ] Read on fd 3 (len=8 timeout=3300ms)
[ 19:45:02 ] [ Serial ] Read on fd 3 (len=1 timeout=3300ms)
[ 19:45:02 ] [ 1702 ] Card EMM took: 0s 432751us
[ 19:45:02 ] [ EMM Cache ] Adding dynamic Cache entry at 1
[ 19:45:02 ] [ EMM Cache ] Hits 0 Total 1
[ 19:45:02 ] [ 1702 ] Emm Cache Add took: 0s 122us
[ 19:45:02 ] [ SID ] Unblocking sids for Reader 0 (Phoenix Interface)
[ 19:45:02 ] [ Card queue /dev/ttyUSB0 ] Ecm run, sid A, prio 1, queue len: 1, max len: 2
[ 19:45:02 ] [ ECM Cache ] Hits 0 Total 1 [CRC CB6ACA64] - returning -999
[ 19:45:02 ] [ 1702 ] Ecm Cache Check took: 0s 65us [CRC cb6aca64]
[ 19:45:02 ] [ Serial ] Write on fd 3 (len=148)
[ 19:45:02 ] [ Serial ] Read on fd 3 (len=148 timeout=1621ms)
[ 19:45:03 ] [ Serial ] Read on fd 3 (len=8 timeout=3300ms)
[ 19:45:03 ] [ Serial ] Read on fd 3 (len=1 timeout=3300ms)
[ 19:45:03 ] [ 1702 ] Card ECM took: 0s 409474us
[ 19:45:03 ] [ Newcamd ] ECM -> dummy (NOT OK) SID 000A
[ 19:45:03 ] [ SID ] Updating SID 000A for Reader 0 (Phoenix Interface) bad - SO is: 0
[ 19:45:03 ] [ SID ] Adding SID 000A on Reader 0 (Phoenix Interface) - SO is: 0 [Allow]
[ 19:45:03 ] [ ECM Cache ] Adding dynamic Cache entry at 1
[ 19:45:03 ] [ ECM Cache ] Hits 0 Total 1
[ 19:45:03 ] [ 1702 ] Ecm Cache Add took: 0s 121us
[ 19:45:05 ] [ Newcamd:15000 ] ECM <- dummy
[ 19:45:05 ] [ SID ] Checking for SID 000A for Reader 0 (Phoenix Interface) - SO is: 0
[ 19:45:05 ] [ Newcamd:15000 ] Accepted SID 000A on Reader 0 (Phoenix Interface) from dummy
[ 19:45:05 ] [ ECM Cache ] Hits 0 Total 2 [CRC 33EF0E9D] - returning -999
[ 19:45:05 ] [ 1702 ] Ecm Cache Check took: 0s 71us [CRC 33ef0e9d]
[ 19:45:05 ] [ Card queue /dev/ttyUSB0 ] ECM added, sid A, prio 44
[ 19:45:05 ] [ Card queue /dev/ttyUSB0 ] Ecm run, sid A, prio 44, queue len: 1, max len: 2
[ 19:45:05 ] [ ECM Cache ] Hits 0 Total 2 [CRC 33EF0E9D] - returning -999
[ 19:45:05 ] [ 1702 ] Ecm Cache Check took: 0s 64us [CRC 33ef0e9d]
[ 19:45:05 ] [ Serial ] Write on fd 3 (len=148)
[ 19:45:05 ] [ Serial ] Read on fd 3 (len=148 timeout=1621ms)
[ 19:45:05 ] [ Serial ] Read on fd 3 (len=8 timeout=3300ms)
[ 19:45:05 ] [ Serial ] Read on fd 3 (len=1 timeout=3300ms)
[ 19:45:05 ] [ 1702 ] Card ECM took: 0s 470714us
[ 19:45:05 ] [ Newcamd ] ECM -> dummy (NOT OK) SID 000A
[ 19:45:05 ] [ SID ] Updating SID 000A for Reader 0 (Phoenix Interface) bad - SO is: 0
[ 19:45:05 ] [ ECM Cache ] Adding dynamic Cache entry at 2
[ 19:45:05 ] [ ECM Cache ] Hits 0 Total 2
[ 19:45:05 ] [ 1702 ] Ecm Cache Add took: 0s 183us
[ 19:45:06 ] [ Newcamd:15000 ] EMM <- dummy
[ 19:45:06 ] [ EMM Cache ] Hits 0 Total 2 [CRC DA4AE26A] - returning -999
[ 19:45:06 ] [ 1702 ] Emm Cache Check took: 0s 93us [CRC da4ae26a]
[ 19:45:06 ] [ Card queue /dev/ttyUSB0 ] EMM added, sid 1, prio 255
[ 19:45:06 ] [ Card queue /dev/ttyUSB0 ] Emm run, sid 1, prio 255, queue len: 1, max len: 2
[ 19:45:06 ] [ EMM Cache ] Hits 0 Total 2 [CRC DA4AE26A] - returning -999
[ 19:45:06 ] [ 1702 ] Emm Cache Check took: 0s 65us [CRC da4ae26a]
[ 19:45:06 ] [ Irdeto ] EMM Update on Beta (GA)
[ 19:45:06 ] [ Serial ] Write on fd 3 (len=145)
[ 19:45:06 ] [ Serial ] Read on fd 3 (len=145 timeout=1621ms)
[ 19:45:07 ] [ Serial ] Read on fd 3 (len=8 timeout=3300ms)
[ 19:45:07 ] [ Serial ] Read on fd 3 (len=1 timeout=3300ms)
[ 19:45:07 ] [ 1702 ] Card EMM took: 0s 492897us
[ 19:45:07 ] [ EMM Cache ] Adding dynamic Cache entry at 2
[ 19:45:07 ] [ EMM Cache ] Hits 0 Total 2
[ 19:45:07 ] [ 1702 ] Emm Cache Add took: 0s 133us
[ 19:45:07 ] [ SID ] Unblocking sids for Reader 0 (Phoenix Interface)

Das geht dann ewig so weiter.

CCcam-Client:

19:45:08.766 CCcam: ======================================================================
19:45:08.774 CCcam: starting CCcam 2.0.7 compiled on Feb 13 2008@14:49:33
19:45:08.775 CCcam: ======================================================================
19:45:08.781 CCcam: online using nodeId 42a45b4b08f88932
19:45:08.838 CCcam: Server disabled
19:45:08.842 CCcam: dvb api3 detected
19:45:08.847 CCcam: create 1 cam device(s)
19:45:08.861 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
19:45:08.863 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
19:45:08.866 CCcam: static cw not found or bad
19:45:08.873 CCcam: parsed 0 entries from /var/etc/CCcam.prio
19:45:08.875 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
19:45:08.878 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
19:45:08.942 CCcam: newcamd server 192.168.4.10:15000 user: dummy
19:45:08.954 CCcam: newcamd caid 1702 providers 4 userid: 0
19:45:08.956 CCcam: newcamd card serial: ********
19:45:08.958 CCcam: newcamd prov 00 000000 00ffffff
19:45:08.960 CCcam: newcamd prov 01 000001 00ffffff
19:45:08.962 CCcam: newcamd prov 02 000002 00ffffff
19:45:08.966 CCcam: newcamd prov 03 000003 00ffffff
19:45:08.982 CCcam: cam[0] set PMT for sid=6d66
19:45:08.988 CCcam: start EMM
19:45:09.060 CCcam: EMM demux 1 set
19:45:17.209 CCcam: found betacrypt caid: 0x1702 ecmpid: 0x1742 id: 0x0
19:45:17.210 CCcam: found betacrypt caid: 0x1722 ecmpid: 0x1c43 id: 0x0
19:45:17.211 CCcam: found nagra caid: 0x1837 ecmpid: 0x1a42 id: 0x0
19:45:17.213 CCcam: found nagra caid: 0x1833 ecmpid: 0x1842 id: 0x0
19:45:17.213 CCcam: found nagra caid: 0x1834 ecmpid: 0x1c42 id: 0x0
19:45:17.214 CCcam: found nagra caid: 0x1836 ecmpid: 0x1843 id: 0x0
19:45:17.216 CCcam: found nds caid: 0x9c4 ecmpid: 0x1b42 id: 0x0
19:45:17.217 CCcam: cam[0] set PMT for sid=a
19:45:17.225 CCcam: start EMM
19:45:17.313 CCcam: EMM demux 1 set
19:45:17.316 CCcam: EMM: start filter on betacrypt emmpid: 0x1000 caid: 0x1702 id: 0x0
19:45:17.319 CCcam: EMM: start filter on betacrypt emmpid: 0x1502 caid: 0x1722 id: 0x0
19:45:17.322 CCcam: EMM: start filter on nagra emmpid: 0x1004 caid: 0x1837 id: 0x0
19:45:17.326 CCcam: EMM: start filter on nagra emmpid: 0x1002 caid: 0x1833 id: 0x0
19:45:17.329 CCcam: EMM: start filter on nagra emmpid: 0x1002 caid: 0x1836 id: 0x0
19:45:17.330 CCcam: EMM: not interested in 09C4:000000
19:45:17.532 CCcam: chid 0001
19:45:17.534 CCcam: cam[0] ecm even nok caid:0x1722 id:0x0 pid:0x1c43 Unknown
19:45:17.782 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 84ec) no key
19:45:17.784 CCcam: cam[0] ecm odd nok caid:0x1837 id:0x84ec pid:0x1a42 Unknown
19:45:18.032 CCcam: nagra2 emu can't decode ecm (key: 1, ident: d7) no key
19:45:18.033 CCcam: cam[0] ecm even nok caid:0x1833 id:0xd7 pid:0x1842 Unknown
19:45:18.282 CCcam: nagra2 emu can't decode ecm (key: 0, ident: e4) no key
19:45:18.283 CCcam: cam[0] ecm even nok caid:0x1834 id:0xe4 pid:0x1c42 Unknown
19:45:18.532 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 56) no key
19:45:18.533 CCcam: cam[0] ecm even nok caid:0x1836 id:0x56 pid:0x1843 Unknown
19:45:19.000 CCcam: newcamd emm -> 192.168.4.10:15000
19:45:19.010 CCcam: newcamd emm <- 192.168.4.10:15000 ok
19:45:19.016 CCcam: nagra2 emu can't decode emm (id: 38) no RSA key
19:45:19.019 CCcam: nagra2 emu can't decode emm (id: 38) no RSA key
19:45:19.033 CCcam: chid 0001
19:45:19.035 CCcam: newcamd ecm -> 192.168.4.10:15000
19:45:19.855 CCcam: newcamd ecm <- 192.168.4.10:15000 error
19:45:19.856 CCcam: cam[0] ecm even nok caid:0x1702 id:0x0 pid:0x1742 Unknown
19:45:20.285 CCcam: chid 0001
19:45:20.286 CCcam: cam[0] ecm odd nok caid:0x1722 id:0x0 pid:0x1c43 Unknown
19:45:20.535 CCcam: nagra2 emu can't decode ecm (key: 0, ident: a666) no key
19:45:20.536 CCcam: cam[0] ecm even nok caid:0x1837 id:0xa666 pid:0x1a42 Unknown
19:45:20.786 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 10) no key
19:45:20.787 CCcam: cam[0] ecm odd nok caid:0x1833 id:0x10 pid:0x1842 Unknown
19:45:21.036 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 9e) no key
19:45:21.037 CCcam: cam[0] ecm odd nok caid:0x1834 id:0x9e pid:0x1c42 Unknown
19:45:21.286 CCcam: nagra2 emu can't decode ecm (key: 1, ident: f0) no key
19:45:21.287 CCcam: cam[0] ecm odd nok caid:0x1836 id:0xf0 pid:0x1843 Unknown
19:45:21.465 CCcam: nagra2 emu can't decode emm (id: 3501) no RSA key
19:45:21.787 CCcam: chid 0001
19:45:21.788 CCcam: newcamd ecm -> 192.168.4.10:15000
19:45:22.269 CCcam: newcamd ecm <- 192.168.4.10:15000 error
19:45:22.273 CCcam: cam[0] ecm odd nok caid:0x1702 id:0x0 pid:0x1742 Unknown
19:45:22.538 CCcam: chid 0001
19:45:22.541 CCcam: cam[0] ecm odd nok caid:0x1722 id:0x0 pid:0x1c43 Unknown
19:45:22.789 CCcam: nagra2 emu can't decode ecm (key: 0, ident: a666) no key
19:45:22.791 CCcam: cam[0] ecm even nok caid:0x1837 id:0xa666 pid:0x1a42 Unknown
19:45:23.039 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 10) no key
19:45:23.042 CCcam: cam[0] ecm odd nok caid:0x1833 id:0x10 pid:0x1842 Unknown
19:45:23.156 CCcam: nagra2 emu can't decode emm (id: d) no RSA key
19:45:23.159 CCcam: nagra2 emu can't decode emm (id: d) no RSA key
19:45:23.211 CCcam: newcamd emm -> 192.168.4.10:15000
19:45:23.218 CCcam: newcamd emm <- 192.168.4.10:15000 ok
19:45:23.289 CCcam: nagra2 emu can't decode ecm (key: 1, ident: 9e) no key
19:45:23.291 CCcam: cam[0] ecm odd nok caid:0x1834 id:0x9e pid:0x1c42 Unknown
19:45:23.540 CCcam: nagra2 emu can't decode ecm (key: 1, ident: f0) no key
19:45:23.542 CCcam: cam[0] ecm odd nok caid:0x1836 id:0xf0 pid:0x1843 Unknown
19:45:24.040 CCcam: chid 0001
19:45:24.043 CCcam: newcamd ecm -> 192.168.4.10:15000
19:45:24.045 CCcam: newcamd ecm <- 192.168.4.10:15000 failure from cache
19:45:24.047 CCcam: cam[0] ecm odd nok caid:0x1702 id:0x0 pid:0x1742 Unknown
19:45:27.043 CCcam: newcamd emm -> 192.168.4.10:15000
19:45:27.054 CCcam: newcamd emm <- 192.168.4.10:15000 ok
19:45:29.548 CCcam: chid 0001
19:45:29.550 CCcam: cam[0] ecm even nok caid:0x1722 id:0x0 pid:0x1c43 Unknown
19:45:29.799 CCcam: nagra2 emu can't decode ecm (key: 0, ident: f6de) no key
19:45:29.800 CCcam: cam[0] ecm odd nok caid:0x1837 id:0xf6de pid:0x1a42 Unknown
19:45:30.049 CCcam: nagra2 emu can't decode ecm (key: 0, ident: 71) no key
19:45:30.053 CCcam: cam[0] ecm even nok caid:0x1833 id:0x71 pid:0x1842 Unknown
19:45:30.300 CCcam: nagra2 emu can't decode ecm (key: 0, ident: eb) no key
19:45:30.301 CCcam: cam[0] ecm even nok caid:0x1834 id:0xeb pid:0x1c42 Unknown
19:45:30.550 CCcam: nagra2 emu can't decode ecm (key: 0, ident: c7) no key
19:45:30.552 CCcam: cam[0] ecm even nok caid:0x1836 id:0xc7 pid:0x1843 Unknown
19:45:31.051 CCcam: chid 0001

Geht dann auch ewig so weiter.

EMM ok, ECM nicht? Was bedeutet das? Hat noch jemand eine Idee?

Newcs Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

chr73

Newbie

TNe-DEb

Ist oft hier

chr73

Newbie

TNe-DEb

Ist oft hier

chr73

Newbie

TNe-DEb

Ist oft hier

chr73

Newbie

chr73

Newbie

TNe-DEb

Ist oft hier

chr73

Newbie

chr73

Newbie

chr73

Newbie

Ähnliche Themen

Newcs Newcs/CCcam: Problem beim Wechsel auf Pay-TV Kanal

Newbie

Ist oft hier

Newbie

Ist oft hier

Newbie

Ist oft hier

Newbie

Newbie

Ist oft hier

Newbie

Newbie

Newbie

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz