Corum
Newbie
Hallo vielleicht kann mir einer von euch weiterhelfen. Komme nicht mehr weiter. Versuche seit tagen den newcs auf dem qnap zum laufen zu bringen.
bin schon richtig frustriert. post euch mal meine logs. vielleicht weis bei euch einer wo der fehler liegt. Betreiben möchte ich darin eine mtv conax karte
1. Log wenn newcs startet (siehe vor allem letzte zeile)
[/opt/etc] # /opt/bin/newcs -c /opt/etc/newcs.xmlout=1269ms)
This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:58:02
Reading Config file from /opt/etc/newcs.xml 0n.
TCP-log password is enabled, set to: NewCSpwd
level: internalrd reader unlocked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
type: all4 ] [ Loader ] Card 0B00 on port /dev/usb/ttyUSB0 failed
output: console,tcper ] Starting Newcamd Server on port 34001
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255usb/ttyUSB0 ] Starting...
TCP log options: level 1 type 255thread Server started on port 34001
[ 17:30:17 ] [ Box detect ] Box type 13 (Qnap NAS)
[ 17:30:17 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 17:30:17 ] [ Config ] Option <crypto-special> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 17:30:17 ] [ Config ] Option <PTShandshake> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 17:30:17 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 17:30:17 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 17:30:17 ] [ Config ] Option <sid> for device 0 (Phoenix on Com1) not present, no static sids added to filter
[ 17:30:17 ] [ Config ] /dev/usb/ttyUSB0 ECM priority: round
[ 17:30:17 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myShares) on port 1234 - 0xafd78 [ op ptr 0xb1f58 ]
[ 17:30:17 ] [ Newcamd ] Server name : newcs
[ 17:30:17 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 17:30:17 ] [ Config ] Option <hostname> or <port> not present for User: cheesy, DISABLING reverse login
[ 17:30:17 ] [ Newcamd ] User 2: cheesy, Pass: cheesy, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, level: 0
[ 17:30:17 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 17:30:17 ] [ EMM Cache ] Initialising dynamic Cache
[ 17:30:17 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2329
[ 17:30:17 ] Calibrating delay loops
[ 17:30:17 ] usleep(5) takes: 0 s 15 us
[ 17:30:17 ] usleep(10) takes: 0 s 21 us
[ 17:30:17 ] usleep(100) takes: 0 s 109 us
[ 17:30:17 ] usleep(500) takes: 0 s 511 us
[ 17:30:17 ] Allocation memory for 200 regular users
[ 17:30:17 ] [ Loader ] Starting Telnet on port 8091
[ 17:30:17 ] [ SockSrv ] Server thread started
[ 17:30:17 ] [ Loader ] Started HTTP-server on port: 8090
[ 17:30:17 ] [ Loader ] Reader type 2 on node /dev/usb/ttyUSB0
[ 17:30:17 ] [ CardMan ] Reseting reader parameters
[ 17:30:17 ] [ Phoenix ] Opening device /dev/usb/ttyUSB0
[ 17:30:17 ] [ Phoenix ] Setting Parity to: EVEN
[ 17:30:17 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/ttyUSB0
[ 17:30:17 ] [ Phoenix ] Setting Baud to standard 9600
[ 17:30:18 ] [ Phoenix ] Normal RESET on node /dev/usb/ttyUSB0
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=7 timeout=5300ms)
[ 17:30:20 ] Phoenix_read:
0000: 3b 24 00 30 42 30 30 ;$.0B00
[ 17:30:20 ] [ CardMan ] Atr header is 3B 24 [NORMAL]
[ 17:30:20 ] [ ATR ] Data:
0000: 3b 24 00 30 42 30 30 ;$.0B00
[ 17:30:20 ] [ ATR ] T=0 1etu=103.92us Guardtime:12etu WWT:9600etu
[ 17:30:20 ] [ ATR ] Historical bytes: 0 B 0 0
[ 17:30:20 ] [ Loader ] Init Conax card
[ 17:30:20 ] Card reader locked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
[ 17:30:20 ] [ Phoenix ] Setting Parity to: EVEN
[ 17:30:20 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/ttyUSB0
[ 17:30:20 ] [ Phoenix ] Setting Baud to standard 9600
[ 17:30:20 ] [ Conax ] Sending to Card: DD26000003
[ 17:30:20 ] Phoenix_write:
0000: dd 26 00 00 03 .&...
[ 17:30:20 ] [ Serial ] Write on fd 9 (len=5)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=5 timeout=1498ms)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=1 timeout=1298ms)
[ 17:30:20 ] Phoenix_read:
0000: 3b ;
[ 17:30:20 ] Phoenix_write:
0000: 10 01 40 ..@
[ 17:30:20 ] [ Serial ] Write on fd 9 (len=3)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=3 timeout=1498ms)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=1 timeout=1298ms)
[ 17:30:20 ] Phoenix_read:
0000: 30 0
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=1 timeout=1298ms)
[ 17:30:20 ] Phoenix_read:
0000: 42 B
[ 17:30:20 ] [ Conax ] Status Word from Card: 3042
[ 17:30:20 ] [ Conax ] Sending to Card: DDCA000042
[ 17:30:20 ] Phoenix_write:
0000: dd ca 00 00 42 ....B
[ 17:30:20 ] [ Serial ] Write on fd 9 (len=5)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=5 timeout=1498ms)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=1 timeout=1298ms)
[ 17:30:20 ] Phoenix_read:
0000: 30 0
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=66 timeout=1298ms)
[ 17:30:21 ] [ Serial ] Read timeout (2 of 66)
[ 17:30:21 ] Phoenix_read:
0000: 6e 00 n.
[ 17:30:21 ] Card reader unlocked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
[ 17:30:21 ] [ Loader ] Card 0B00 on port /dev/usb/ttyUSB0 failed
[ 17:30:21 ] [ Loader ] Starting Newcamd Server on port 34001
[ 17:30:21 ] [ NewCS ] Ready to GO!
[/opt/etc] # [ 17:30:21 ] [ Card queue /dev/usb/ttyUSB0 ] Starting...
[ 17:30:21 ] [ Newcamd ] Newcamd thread Server started on port 34001
newcamd: main loop
2. meine newcs.xml
<?xml version="1.0"?>
<newCSconfig>
<readers name="Standard Phoenix on PC">
<device>
<name>Phoenix on Com1</name>
<type>phoenix</type>
<mhz>358</mhz>
<node>/dev/usb/ttyUSB0</node>
<parity>even</parity>
<reset>normal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>no</carddetect>
<cardlevel>0</cardlevel>
<newcamd_port>34001</newcamd_port>
<boxkey>00000000</boxkey>
<autosid>yes</autosid>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>10001</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8090</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>internal</level>
<type>all</type>
<output>console,tcp</output>
<tcp_port>8091</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deske
<user>
<name>cheesy</name>
<password>cheesy</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<readers>
<allow>Phoenix on Com1</allow>
</readers>
</user>
</newcamdserver>
<chameleon2>
<server>
<port>1234</port>
<enabled>no</enabled>
<realm>myShares</realm>
</server>
<peer>
<hostname>remote</hostname>
<port>1234</port>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</peer>
<user>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
3. Fehlermeldung wenn ich versuche mit ccam dreambox 8000 zu connecten
[ 17:38:45 ] [ Newcamd ] new connection from 192.168.0.200 on socket 11
[ 17:38:45 ] [ Newcamd:34001 ] Connection from 192.168.0.200
[ 17:38:45 ] [ Newcamd:34001 ] User cheesy logged in, client: CCcam
[ 17:38:45 ] [ Newcamd:34001 ] Connection from cheesy to not-ready server!
[ 17:38:55 ] [ Newcamd ] new connection from 192.168.0.200 on socket 11
[ 17:38:55 ] [ Newcamd:34001 ] Connection from 192.168.0.200
[ 17:38:55 ] [ Newcamd:34001 ] User cheesy logged in, client: CCcam
[ 17:38:55 ] [ Newcamd:34001 ] Connection from cheesy to not-ready server!
4. NLinie von meiner dream ccam.cfg
N: 192.168.0.250 34001 cheesy cheesy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Den Smargo hab ich schon auf auto und zur zeit auf fest 3.68 mhz eingestellt. Auch habe ich 6 mhz schon probiert. Keine Ahnung. Vielleicht
weiß von euch jemand Rat. Komme nicht mehr weiter und bin total frustriert.
Danke schon einmal
Gruß
bin schon richtig frustriert. post euch mal meine logs. vielleicht weis bei euch einer wo der fehler liegt. Betreiben möchte ich darin eine mtv conax karte
1. Log wenn newcs startet (siehe vor allem letzte zeile)
[/opt/etc] # /opt/bin/newcs -c /opt/etc/newcs.xmlout=1269ms)
This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:58:02
Reading Config file from /opt/etc/newcs.xml 0n.
TCP-log password is enabled, set to: NewCSpwd
level: internalrd reader unlocked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
type: all4 ] [ Loader ] Card 0B00 on port /dev/usb/ttyUSB0 failed
output: console,tcper ] Starting Newcamd Server on port 34001
logger config: level 16777215 type 255 output 5
Console log options: level 16777215 type 255usb/ttyUSB0 ] Starting...
TCP log options: level 1 type 255thread Server started on port 34001
[ 17:30:17 ] [ Box detect ] Box type 13 (Qnap NAS)
[ 17:30:17 ] [ Config ] Option <blockc0> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 17:30:17 ] [ Config ] Option <crypto-special> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 17:30:17 ] [ Config ] Option <PTShandshake> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 17:30:17 ] [ Config ] Option <Seca-PPV> for device 0 (Phoenix on Com1) not present, defaulting to NO
[ 17:30:17 ] [ Config ] Pincode for device 0 (Phoenix on Com1): 0000
[ 17:30:17 ] [ Config ] Option <sid> for device 0 (Phoenix on Com1) not present, no static sids added to filter
[ 17:30:17 ] [ Config ] /dev/usb/ttyUSB0 ECM priority: round
[ 17:30:17 ] [ Chameleon2 ] Adding name myname on destination remote (Realm: myShares) on port 1234 - 0xafd78 [ op ptr 0xb1f58 ]
[ 17:30:17 ] [ Newcamd ] Server name : newcs
[ 17:30:17 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 17:30:17 ] [ Config ] Option <hostname> or <port> not present for User: cheesy, DISABLING reverse login
[ 17:30:17 ] [ Newcamd ] User 2: cheesy, Pass: cheesy, Host none, Port: 0, Au: On, Spider allowed: No, Sidoverride: No, level: 0
[ 17:30:17 ] [ httpd ] httpd-user: newcs, password: newcs, accesslevel: admin
[ 17:30:17 ] [ EMM Cache ] Initialising dynamic Cache
[ 17:30:17 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 2329
[ 17:30:17 ] Calibrating delay loops
[ 17:30:17 ] usleep(5) takes: 0 s 15 us
[ 17:30:17 ] usleep(10) takes: 0 s 21 us
[ 17:30:17 ] usleep(100) takes: 0 s 109 us
[ 17:30:17 ] usleep(500) takes: 0 s 511 us
[ 17:30:17 ] Allocation memory for 200 regular users
[ 17:30:17 ] [ Loader ] Starting Telnet on port 8091
[ 17:30:17 ] [ SockSrv ] Server thread started
[ 17:30:17 ] [ Loader ] Started HTTP-server on port: 8090
[ 17:30:17 ] [ Loader ] Reader type 2 on node /dev/usb/ttyUSB0
[ 17:30:17 ] [ CardMan ] Reseting reader parameters
[ 17:30:17 ] [ Phoenix ] Opening device /dev/usb/ttyUSB0
[ 17:30:17 ] [ Phoenix ] Setting Parity to: EVEN
[ 17:30:17 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/ttyUSB0
[ 17:30:17 ] [ Phoenix ] Setting Baud to standard 9600
[ 17:30:18 ] [ Phoenix ] Normal RESET on node /dev/usb/ttyUSB0
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=7 timeout=5300ms)
[ 17:30:20 ] Phoenix_read:
0000: 3b 24 00 30 42 30 30 ;$.0B00
[ 17:30:20 ] [ CardMan ] Atr header is 3B 24 [NORMAL]
[ 17:30:20 ] [ ATR ] Data:
0000: 3b 24 00 30 42 30 30 ;$.0B00
[ 17:30:20 ] [ ATR ] T=0 1etu=103.92us Guardtime:12etu WWT:9600etu
[ 17:30:20 ] [ ATR ] Historical bytes: 0 B 0 0
[ 17:30:20 ] [ Loader ] Init Conax card
[ 17:30:20 ] Card reader locked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
[ 17:30:20 ] [ Phoenix ] Setting Parity to: EVEN
[ 17:30:20 ] [ Phoenix ] Setting 2 Stop bits on node /dev/usb/ttyUSB0
[ 17:30:20 ] [ Phoenix ] Setting Baud to standard 9600
[ 17:30:20 ] [ Conax ] Sending to Card: DD26000003
[ 17:30:20 ] Phoenix_write:
0000: dd 26 00 00 03 .&...
[ 17:30:20 ] [ Serial ] Write on fd 9 (len=5)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=5 timeout=1498ms)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=1 timeout=1298ms)
[ 17:30:20 ] Phoenix_read:
0000: 3b ;
[ 17:30:20 ] Phoenix_write:
0000: 10 01 40 ..@
[ 17:30:20 ] [ Serial ] Write on fd 9 (len=3)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=3 timeout=1498ms)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=1 timeout=1298ms)
[ 17:30:20 ] Phoenix_read:
0000: 30 0
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=1 timeout=1298ms)
[ 17:30:20 ] Phoenix_read:
0000: 42 B
[ 17:30:20 ] [ Conax ] Status Word from Card: 3042
[ 17:30:20 ] [ Conax ] Sending to Card: DDCA000042
[ 17:30:20 ] Phoenix_write:
0000: dd ca 00 00 42 ....B
[ 17:30:20 ] [ Serial ] Write on fd 9 (len=5)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=5 timeout=1498ms)
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=1 timeout=1298ms)
[ 17:30:20 ] Phoenix_read:
0000: 30 0
[ 17:30:20 ] [ Serial ] Read on fd 9 (len=66 timeout=1298ms)
[ 17:30:21 ] [ Serial ] Read timeout (2 of 66)
[ 17:30:21 ] Phoenix_read:
0000: 6e 00 n.
[ 17:30:21 ] Card reader unlocked for reader Phoenix on Com1 [/dev/usb/ttyUSB0]
[ 17:30:21 ] [ Loader ] Card 0B00 on port /dev/usb/ttyUSB0 failed
[ 17:30:21 ] [ Loader ] Starting Newcamd Server on port 34001
[ 17:30:21 ] [ NewCS ] Ready to GO!
[/opt/etc] # [ 17:30:21 ] [ Card queue /dev/usb/ttyUSB0 ] Starting...
[ 17:30:21 ] [ Newcamd ] Newcamd thread Server started on port 34001
newcamd: main loop
2. meine newcs.xml
<?xml version="1.0"?>
<newCSconfig>
<readers name="Standard Phoenix on PC">
<device>
<name>Phoenix on Com1</name>
<type>phoenix</type>
<mhz>358</mhz>
<node>/dev/usb/ttyUSB0</node>
<parity>even</parity>
<reset>normal</reset>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>no</carddetect>
<cardlevel>0</cardlevel>
<newcamd_port>34001</newcamd_port>
<boxkey>00000000</boxkey>
<autosid>yes</autosid>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>10001</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8090</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<mode>simple</mode>
<level>internal</level>
<type>all</type>
<output>console,tcp</output>
<tcp_port>8091</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deske
<user>
<name>cheesy</name>
<password>cheesy</password>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<readers>
<allow>Phoenix on Com1</allow>
</readers>
</user>
</newcamdserver>
<chameleon2>
<server>
<port>1234</port>
<enabled>no</enabled>
<realm>myShares</realm>
</server>
<peer>
<hostname>remote</hostname>
<port>1234</port>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</peer>
<user>
<name>myname</name>
<password>mypassword</password>
<realm>myShares</realm>
</user>
</chameleon2>
</newCSconfig>
3. Fehlermeldung wenn ich versuche mit ccam dreambox 8000 zu connecten
[ 17:38:45 ] [ Newcamd ] new connection from 192.168.0.200 on socket 11
[ 17:38:45 ] [ Newcamd:34001 ] Connection from 192.168.0.200
[ 17:38:45 ] [ Newcamd:34001 ] User cheesy logged in, client: CCcam
[ 17:38:45 ] [ Newcamd:34001 ] Connection from cheesy to not-ready server!
[ 17:38:55 ] [ Newcamd ] new connection from 192.168.0.200 on socket 11
[ 17:38:55 ] [ Newcamd:34001 ] Connection from 192.168.0.200
[ 17:38:55 ] [ Newcamd:34001 ] User cheesy logged in, client: CCcam
[ 17:38:55 ] [ Newcamd:34001 ] Connection from cheesy to not-ready server!
4. NLinie von meiner dream ccam.cfg
N: 192.168.0.250 34001 cheesy cheesy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Den Smargo hab ich schon auf auto und zur zeit auf fest 3.68 mhz eingestellt. Auch habe ich 6 mhz schon probiert. Keine Ahnung. Vielleicht
weiß von euch jemand Rat. Komme nicht mehr weiter und bin total frustriert.
Danke schon einmal
Gruß