Neuste FW Openbox HD S5/S7/S8

[Gelöschtes Mitglied 28752]

und hier geht's weiter mit Firmware,hier wurden manche Sachen gefixt und bugs beseitigt...


Changes :
- The new chesspiece in infobar - display of the name current + following transfer is added (joins in the Menu - Installations of the menu - Ifo Box Event Type " the name

current+foll. Transfers/names of current transfer+progressor of time)
- Freezing Screen when Flash writing fix.
- Diseq Command error fix.
- Voltage changing issue when receiver turn to standby condition during recording fix.
- Not appearing popup message for plugin download fix.
- Audio delay sync feature added and it can set on AV Output Menu
--> Menu - Configuration - A/V setting : Audio Sync Delay 0 ms..20ms...400 ms
- Recording fail message appears in case default recording device is set incorrectly

fix.
--> receiver will ask to find correct recording device.
- Ch. Search improvements : BlindScan, Auto & Manuell Search
--> Incorrect channel searching result between two TP which has very near frequency

fix.
- Eutelsat 16E scan bug fix.
- TP Datenbank update : Eutelsat 16E
- New SAT add. : Eutel sesat 1 - 16E
- Receiver hangup in System Informaiton Menu fix.
- API Version , Driver version update



v1.08.01 / 2010. 03. 23 / Build Version : 2801

Openbox HD S5 soft hier >>>>> Link ist nicht mehr aktiv. <<<<<<

Openbox HD S7 soft hier >>>>> Link ist nicht mehr aktiv. <<<<<<

Openbox HD S8 soft hier >>>>> Link ist nicht mehr aktiv. <<<<<<

 

[Gelöschtes Mitglied 28752]

AW: Aktuelle FW Openbox HD S5/S7/S8

1. Malfunction of Standby Power OFF: fixed.
2. Fluctuation by CVBS noise after rebooting: fixed.
3. Live will be started after Tuner Locking.
4. mp3 decoding improved.
5. EPG Language setting menu : added (Inside Language Setting Menu)
6. Arabic file name will be showed correctly in Play List in case English and Arabic Menu Language setting
7. Fault TS file will not be seleceted and checked in Play List.
8. For Middle East models, delay time of "scrambled service" message added.
9. Optus D1, D2 tp updated.
10.Loop thought power Bypass in case Standby Off(not supporting 1W Stanby)
--> Important : Standby Power must to ON
--> Menu - Configuration - A/V Output Setting : Standby Power ON
11.Parental Control of Plugin Menu add.
--> Menu - Configuration - Parental Control : Plugin (Unlock/Lock)
12.Audio bug fix. (Pls. test long time)
13. mgcmd recording will be okay with this version.

v 1.08.09 / 2010. 04. 06 / Build Version : 2848



Openbox HD S5 soft hier >>>>> Link ist nicht mehr aktiv. <<<<<<

Openbox HD S7 soft hier >>>>> Link ist nicht mehr aktiv. <<<<<<

Openbox HD S8 soft hier >>>>> Link ist nicht mehr aktiv. <<<<<<

 

[Gelöschtes Mitglied 28752]

AW: Aktuelle FW Openbox HD S5/S7/S8


Resetting to factory settings is required!

The version number of 1.8.1916, although it differs from
presented a few days ago for other brands.

- The possibility of rapid binding BISS key to the current channel in the emulator (the button FAV)
- Correct display name slot recording by pressing the REC button during recording
- Displaying TV guide information on the duration of the program (format HH: MM)
- Button FAV -> All Channels - Favourites - Satellites (formerly favorite was the end)
- Redesigned search for events (TV Guide - Yellow book), is now pressing the REC added and succeed timers
- Restructured PTI, the older versions OScam and CCCam not fit
- New kernel, new API and driver
- Playback of multimedia file format mkV (BETA)
- Improved system performance in general, which directly affects the speed of the receiver
- Changed the structure of the decoding channel through Mgcamd
- Carried out to improve the work regime of simultaneous recording 2 HD channels and watching a third
- Completely redesigned menu conflict resolution timers
- Made automatic detection of the Ethernet network connection with the issuance infobanera
- You can change the font size, using a custom font.
- New infobanery switch with timer
- Cut down all the function of copying services after scanning.
- Cut down confirmation on / off plug-in menu plugin
- Are listed in the records made by the receiver is now possible to see detailed information about the recorded file, which is copied from the EPG
- Scrolling made a full transfer of title and added. information in the info window
- A list of records indicated terper channel from which we recorded
- When viewing a JPEG file by pressing OK, turn the pages without problems
- A photo slideshow pause work and play
- Solved the problem of scanning two closely spaced transponders. Now the minimum scanning step - 5 Mhz (less do not have to suffer high-speed scanning of transponders and generally stop working "blind poiks" - is the restriction of input blocks Sharp)
- "Implanted" Cyrillic for samba
- In the EPG if you click "search for events" - the name of the event is copied into the search box from the channel you are logged on to this menu
- Changed and expanded menu USB Wi-Fi adapters
- Added support for most popular models on a variety of chipsets: ZyDAS ZD1211, Ralink 2570, Ralink RT2870, Ralink RT-3070 (see table)
- Automatic authorization USB Wi-Fi adapters
- Automatic search and detection parameters Wi-Fi networks are in area of a ..
list of supported devices with the new driver
Open / close Spoiler (hover to show)

apart from this list are working more D LINK DWA-125 (Ralink RT2870) and Cisco WUSB54GC (Ralink 2570), checked for yourself ...

Pianists during compilation release have not added any portion of the translation into Russian
(USB Front / Rear, and others. Will be fixed soon) and the Ukrainian language.

With this version today, checked the work NewCS - half hour flight was normal with a map of 023,700.

As you know, the structure has been optimized to work with mgcamd, etc.
As a result, should increase the stability and speed (needs further testing).
But the current version mgcamd with this structure does not support recording of two channels and view of the third (it is encoded).

Soft 08/01/1916 from 01/05/2010

Openbox HD S5 soft hier >>>>>Link ist nicht mehr aktiv.<<<<<<

Openbox HD S7 soft hier >>>>> Link ist nicht mehr aktiv.<<<<<<

Openbox HD S8 soft hier >>>>> Link ist nicht mehr aktiv.<<<<<<

 

[Gelöschtes Mitglied 28752]

AW: Aktuelle FW Openbox HD S5/S7/S8

Starting on 01/08/1.08.16 an opportunity to quickly snap BISS key to the current channel in the emulator (the button FAV)

- Become a channel encoded BISS,
- Entering into the internal emulator Menu - 8282
- Choose the correct key (you can see in softcam), click on the FAV and confirm Yes

 

[Gelöschtes Mitglied 28752]

AW: Aktuelle FW Openbox HD S5/S7/S8

1. Added information about the duration of the transfer in the EPG.
2. Added feature to mount a buffer taymshifta records (forward
comments from the programmers as it is included).
3. In the Play added strip progressor information.
4.
Uninstall the backup services after scanning.
5. In the media the name of the satellite channel, item number, full
transponder data are displayed with the scroll bar.
6. In the list of favorites displayed at the top favorite lists, and list
satellites below.
7. The full Russian localization.
8. Full Ukrainian localization.
9. Full Lithuanian localization.
10. In the Plugins menu to add a button "delete".
11. Added delete user script. (In the menu selection
language).

12. Displays the name of the channel in the right side of the play list, from which
been recorded.
13. Fixed spillage pictures on the channel ORF (check
OWL. on a package of £ 60.0 Ricord and 85.2 E).
14. With a daily or weekly timer recording name
record file is installed is the same as the name of the previous file
record with this timer.
15. In the menu if you format the drive device in the drop-down box, you can choose the type of file system.



soft 1.08.22 from 20/05/2010

Openbox HD S5 soft hier >>>>>Link ist nicht mehr aktiv.<<<<<<

Openbox HD S7 soft hier >>>>> Link ist nicht mehr aktiv.<<<<<<

Openbox HD S8 soft hier >>>>> Link ist nicht mehr aktiv.<<<<<<
​

 

[Gelöschtes Mitglied 28752]

AW: Neuste FW Openbox HD S5/S7/S8

software from 1.08.37 26/08/2010

Test version, reset to factory required !!!!!! Who does not believe or doubt - please do not install this version of the software!


1. Fixed crash when recording for a long time
2. Fixed crash when receiving the EPG data
3. Fix a bug with running H / V mode blind search (Blind Scan)
4. Fix a bug with the disappearance of some TP in the auto channel search
5. Fixes translation menu receiver (German)
6. Improved treatment infobannera, which indicates that the storage capacity is insufficient to account
7. Fixed a problem playing records radio channels
8. Fixed screen resolution modes Zapping Mode and Auto Resolution
9. Fixed bug with updating / deleting a file PMT
10. Fixed crash while using the receiver mode recording and playback
11. Improved treatment Unicable
12. The error display windows PIP (removed hanging)
13. Fixed problem with incorrect data filtering PMT
14. Fixed problem with incorrect time information when searching events in the EPG
15. Fixed a bug that occurs when you press Power during the recording
16. Fixed a bug with displaying the current resolution when you change the resolution of on 576i/PAL
17. Optimization and correction of errors function taymshifta
18. Fixed crash receiver while recording 2 channels
19. Fixed automatic selection of audio recording
20. Fixed problem with saving data configuration settings default network (wifi / Ethernet)
21. Modified the display mode information on the recording time (showing start time recording program)
22. Added ability to download the font via USB (ttf file)
23. Fixed crash when exiting the receiver MHW-EPG
24. Resolved automatically start taymshifta after the recording (if that installation started taymshifta exhibited in manual mode)
25. Fixes display LED indicator to the front of the receiver model S8 HD PVR

Openbox HD S5 soft hier >>>>>Link ist nicht mehr aktiv. <<<<<<

Openbox HD S7 soft hier >>>>> Link ist nicht mehr aktiv. <<<<<< ​

Openbox HD S8 soft hier >>>>> Link ist nicht mehr aktiv. <<<<<< ​