gelöst Neue UM02 (BW) - rejected group in Oscam 11695

[ohmp2007]

Hi,

bin ein alter KabelBW Kunde und nun über den wechsel zu Vodafone habe ich ein Upgrade der HD-Sender unternommen und hierzu eine neue UM02 bekommen.

Irgendwie kann ich den Fehler nicht finden, habe nun die Karte über Unique EMM aktiviert Entis sind zu sehen aber mein User bekommt "not foud"

--> (1838@000000/0000/814E/92:759xxxxxx14F): rejected group (0 ms) - RTL2 HD (no matching reader)

Settings DM:
oscam.server

Spoiler

[reader]
label = test
protocol = cccam
device = xxxx
user = test1
password = test1
caid = 1838
group = 1
cccversion = 2.1.4
cccwantemu = 1
ccckeepalive = 1
cccreshare = 2

oscam.user

Spoiler

[account]
user = local
caid = 1838
au = 1
group = 1
cccreshare = 2

Settings Reader:

Spoiler

[reader]
label                         = kbw-hd-um02
protocol                      = smartreader
device                        = Serial:Reader xxxx
smargopatch                   = 1
caid                          = 1838
boxkey                        = AxxxC
rsakey                        = B5xxxxFF
detect                        = cd
mhz                           = 534
cardmhz                       = 343
group                         = 1
emmcache                      = 1,1,2,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1

Du musst Regestriert sein, um das angehängte Bild zusehen.

Danke

 

[dezember2011]

Hi,

schau dir mal diesen Thread an. Dort wird beschrieben wie der Reader auszusehen hat. Bei dir fehlen die Keys. Eine aktuelle Oscam Version ist natürlich auch Pflicht.

 

[ohmp2007]

Habe die zwei fehlende Keys und ecmwhitelist hinzugefüht. Immer noch --> (1838@000000/0000/814F/92:4A7E0DxxxxECA): rejected group (0 ms) - VOX HD (no matching reader)

Reader: (Key+ecmwhitelist) hinzugefügt

Spoiler

[reader]
label                         = kbw-hd-um02
protocol                      = smartreader
device                        = Serial:Reader 4660E9E
smargopatch                   = 1
caid                          = 1838
boxkey                        = AxxxC
rsakey                        = BxxxF
nuid                          = AxxxD
cwekey                        = 2xxxE
ecmwhitelist                  = 1838:92
detect                        = cd
mhz                           = 534
cardmhz                       = 343
group                         = 4
emmcache                      = 1,1,2,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1

Log zu reader:

Spoiler

2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] ready for requests
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] found card system nagra
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] ROM:    D N A S P 1 4 2
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] REV:    R e v G 0 6
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] SER:    ############
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] CAID:   1838
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] Prv.ID: 00 00 04 01 (sysid)
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] Prv.ID: 00 00 00 00
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] IRD ID: ############
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] active to: 2022/06/15 12:59
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] -----------------------------------------
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |id  |tier    |valid from  |valid to    |
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] +----+--------+------------+------------+
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|5924    |2022/03/09  |2022/06/15  |
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|3084    |2022/03/09  |2022/06/15  |
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|1590    |2022/03/09  |2022/05/16  |
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|1595    |2022/03/09  |2022/05/16  |
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|1591    |2022/03/09  |2022/05/16  |
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|1594    |2022/03/09  |2022/05/16  |
2022/03/15 21:03:38 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] -----------------------------------------

EEMs laufen auch sauber durch, ich übersehe hier was komme aber nicht drauf!

Danke

 

[dezember2011]

Benutzt du services? Poste doch mal deine Config (Server,User, Conf) und ein Log vom Start bis zur ersten Abfrage. Welche Oscam Version verwendest du?

 

[ohmp2007]

Hi,

ja benutze Services, srvid von VOX 814F ist auch drin.

Oscam Version 11695
oscam.conf

Spoiler

[global]
logfile                       = /var/InternerSpeicher/logs/oscam.log
unlockparental                = 1
nice                          = -1
emmlogdir                     = /var/log/oscam
lb_mode                       = 2
lb_save                       = 200

[cs357x]
port                          = xxxx

[cccam]
port                          = xxxx
nodeid                        = 3xxxx0
version                       = 2.1.4
reshare                       = 2

[webif]
httpport                      = xx
httpuser                      = xxxx
httppwd                       = xxxx
httprefresh                   = xxx
httpallowed                   = xxxx
httpemmsclean                 = xxx
httpemmgclean                 = xxx
[/SPOILER]
oscam.server
[SPOILER][reader]
label                         = kbw-hd-um02
protocol                      = smartreader
device                        = Serial:Reader xxx
smargopatch                   = 1
caid                          = 1838
boxkey                        = AxxxC
rsakey                        = BxxxF
nuid                          = AxxxxD
cwekey                        = 2xxxxE
ecmwhitelist                  = 1838:92
detect                        = cd
mhz                           = 534
cardmhz                       = 343
group                         = 1
emmcache                      = 1,1,2,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1[/SPOILER]
oscam.user
[SPOILER][account]
user                          = User1
pwd                           = test1
description                   = test
monlevel                      = 2
au                            = kbw-hd-um02
group                         = 1
cccmaxhops                    = 1

Log:

Spoiler

2022/03/15 21:38:00 00000000 s     (main) System name    = Linux
2022/03/15 21:38:00 00000000 s     (main) Host name      = debian
2022/03/15 21:38:00 00000000 s     (main) Release        = 3.2.0-4-kirkwood
2022/03/15 21:38:00 00000000 s     (main) Version        = #1 Debian 3.2.60-1+deb7u1
2022/03/15 21:38:00 00000000 s     (main) Machine        = armv5tel
2022/03/15 21:38:00 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6483
2022/03/15 21:38:00 00000000 s   (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2022/03/15 21:38:00 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2022/03/15 21:38:00 00000000 s     (main) signal handling initialized
2022/03/15 21:38:00 00000000 s   (config) 2 provid's loaded
2022/03/15 21:38:00 00000000 s   (config) 70 service-id's loaded in 6 ms
2022/03/15 21:38:00 00000000 s      (net) cs357x: initialized (fd=4, port=xxx)
2022/03/15 21:38:00 00000000 s      (net) -> CAID: 098C PROVID: 000000
2022/03/15 21:38:00 00000000 s      (net) cccam: initialized (fd=6, port=xxxx)
2022/03/15 21:38:00 00000000 s   (reader) kbw-hd-um02 [smartreader] creating thread for device Serial:Reader xxx
2022/03/15 21:38:00 00000000 s     (main) waiting for local card init
2022/03/15 21:38:00 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] Reader initialized (device=Serial:Reader xxx, detect=cd, mhz= AUTO, cardmhz=343)
2022/03/15 21:38:00 0B0563ED h    (webif) webif: decompressed 185147 bytes back into 489292 bytes
2022/03/15 21:38:00 0B0563ED h    (webif) HTTP Server running. ip=0.0.0.0 port=xx
2022/03/15 21:38:01 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] card detected
2022/03/15 21:38:05 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 xx xx xx xx
2022/03/15 21:38:05 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2022/03/15 21:38:06 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] detect native nagra card
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] ready for requests
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [smartreader] found card system nagra
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max allotted of 1
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] ROM:    D N A S P 1 4 2
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] REV:    R e v G 0 6
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] SER:    ############
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] CAID:   1838
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] Prv.ID: 00 00 04 01 (sysid)
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] Prv.ID: 00 00 00 00
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] IRD ID: ############
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] active to: 2022/06/15 12:59
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] -----------------------------------------
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |id  |tier    |valid from  |valid to    |
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] +----+--------+------------+------------+
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|5924    |2022/03/09  |2022/06/15  |
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|3084    |2022/03/09  |2022/06/15  |
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|1590    |2022/03/09  |2022/05/16  |
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|1595    |2022/03/09  |2022/05/16  |
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|1591    |2022/03/09  |2022/05/16  |
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] |1103|1594    |2022/03/09  |2022/05/16  |
2022/03/15 21:38:07 7C9EF7EA r   (reader) kbw-hd-um02 [nagra] -----------------------------------------
2022/03/15 21:38:08 00000000 s     (main) init for all local cards done
2022/03/15 21:38:08 00000000 s (emmcache) loaded 16 emmcache records from /var/etc/oscam.emmcache in 1 ms
2022/03/15 21:38:08 00000000 s (emmcache) loaded 16 emmstat records from /var/etc/oscam.emmstat in 0 ms
2022/03/15 21:38:08 00000000 s (anticasc) anti cascading disabled
2022/03/15 21:38:08 00000000 s     (gbox) local gbox failed init
2022/03/15 21:38:10 48CAD789 c   (client) encrypted cccam-client xxx.xxx.xxx.xx granted (User1, au=on (1 reader))
2022/03/15 21:38:10 48CAD789 c      (ecm) User1 (1838@000000/0000/814F/92:Exxx3): rejected group (1 ms) - VOX HD (no matching reader)

 

[Deleted member 437602]

label = kbw-hd-um02

könnte daran liegen..

mal so: kbwhdum02

 

[ohmp2007]

Hi,

bringt auch nichts! :-(

 

[Deleted member 437602]

was passiert denn wenn Dich mal per CS378x verbindest ?

Was denn nun aktuell ?

user = User1
pwd = test1

oder

user = test1
password = test1

 

[dezember2011]

Das der User passt sehen wir ja im log. Sonst würde der sich ja nicht verbinden können. Du hattest im Post 3 die Gruppe auf 4 stehen. Kontrolliere das mal ob da jetzt wirklich überall Gruppe 1 steht.

 

[modino2711]

EEMs laufen auch sauber durch, ich übersehe hier was komme aber nicht drauf!

wohin sollen dann die emm's laufen, wenn du alles geblockt hast?
mach mal bei U und S den block raus, damit die Karte updates bekommt.

 

[RuckZuck]

Ebenfalls lohnt sich ein Update auf 11704. mit Versionen unter 117xx hatte ich auch Probleme mit der UM02.

 

[ohmp2007]

@modino2711 die EMMs die ich brauche werden gespeichert das reicht für updates wenn diese soweit sind.
@RuckZuck1986 das werde ich probieren und berichten

Danke

 

[ohmp2007]

Hallo zusammen,

habe nun mal mein Osam auf 11704 aktualisiert. Bekomme aber immer noch die Meldung "rejected group (0 ms) (no matching reader)"

Meine V23 wird hell die UM02 will nicht.

Anbei die Configs von meiner Dreambox.

Spoiler: Dreambox

oscam config

[global]

Nice = -1

#LogFile = /tmp/oscam.log
LogFile = stdout
ClientTimeout = 5
Level = 15
CacheDelay = 120
WaitForCards = 1
PreferLocalCards = 1
FallbackTimeout = 2
Sleep = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local

oscam user

[account]
user = local
caid = 098E,1838
au = 1
group = 1,2
cccreshare = 2

oscam server

[reader]
label = xxx
protocol = cccam
device = xxx
user = User1
password = xxx
caid = 098E,1838
group = 1
cccversion = 2.1.4
cccwantemu = 1
ccckeepalive = 1
cccreshare = 2[/CODE]

Spoiler: Configs vom Server

oscam config

[global]
logfile = /oscam/oscam/log/oscam.log
pidfile = /oscam/oscam/pid/oscam.pid
nice = -1
maxlogsize = 1024
cwlogdir = /oscam/oscam/log
emmlogdir = /oscam/oscam/log
lb_mode = 2
lb_save = 200

[cache]

[cccam]
port = xxx
nodeid = CxxxE
version = 2.1.4
reshare = 2

[dvbapi]
enabled = 1
pmt_mode = 0
boxtype = pc

oscam user

[account]
user = User1
pwd = xxx
description = xxx
monlevel = 2
group = 1,2
cccmaxhops = 1

oscam server

[reader]
label = kbw-hd-um02
protocol = smartreader
device = Serial:Reader xxx
smargopatch = 1
caid = 1838
boxkey = AxxxC
rsakey = BxxxF
nuid = AxxxD
cwekey = 2xxxE
detect = cd
mhz = 534
cardmhz = 343
group = 1
emmcache = 1,1,2,0
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

Hätte hier vielleicht noch einer einen Tipp?

Danke

 

[dodo83]

Hi,
wie sieht das log aus ab start?
Karte wird ganz normal eingelesen und gültig sind die Entis auch?
zeig mal bitte das log ab start bis Sender abfrage

EDIT
am Client oscam.dvbapi eventuell vorhanden?

 

[RuckZuck]

Der User sollte auch AU machen dürfen wenn die Karte neu ist.
Fehlt komplett in den Settings des Servers