Neue SRG Karte V6 wird nicht eingelesen

dodo83 · 25. August 2018

CARDOK heiß aber das die jetzt eingelesen wird
kein Bild kann aber an den Configs liegen, zeig mal und das log dazu

Matrix555 · 25. August 2018

2018/08/25 23:42:45 1B79256F r (reader) orf_ice [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2018/08/25 23:42:46 5AB3C1D4 r (reader) srg_v6 [mouse] using ecm #80b for long viaccess ecm
2018/08/25 23:42:46 5AB3C1D4 r (reader) srg_v6 [mouse] type: Viaccess (non-standard atr), caid: 0500, serial: ##########
2018/08/25 23:42:46 1B79256F r (reader) orf_ice [internal] Hist. Bytes: TÄ
2018/08/25 23:42:46 1B79256F r (reader) orf_ice [internal] detect irdeto card
2018/08/25 23:42:46 1B79256F r (reader) orf_ice [internal] caid: 0648, acs: 0.05, country code: AUT
2018/08/25 23:42:46 1B79256F r (reader) orf_ice [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2018/08/25 23:42:46 1B79256F r (reader) orf_ice [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [internal] active providers: 4 (a033ff,002500,002600,002700)
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [internal] found card system irdeto
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] entitlements for provider: 1, id: A033FF
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] chid: 000D, date: 2014/06/06 - 2014/07/06
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] chid: 7FF7, date: 2018/08/25 - 2018/09/04
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] chid: 0001, date: 2018/08/24 - 2019/05/02
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] chid: 0002, date: 2018/08/24 - 2019/05/02
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] chid: 7FFB, date: 2017/11/03 - 2017/12/03
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] chid: FFE0, date: 2018/08/24 - 2019/05/02
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] entitlements for provider: 2, id: 002500
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] chid: 001D, date: 2014/06/06 - 2014/09/06
2018/08/25 23:42:47 5AB3C1D4 r (reader) srg_v6 [mouse] providers: 6 (FFF430,060200,060210,060220,060230,060240)
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] entitlements for provider: 4, id: 002700
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] chid: 0031, date: 2014/06/06 - 2014/09/06
2018/08/25 23:42:47 5AB3C1D4 r (reader) srg_v6 [mouse] Maturity level [0]= older than 0 years
2018/08/25 23:42:47 5AB3C1D4 r (reader) srg_v6 [mouse] ready for requests
2018/08/25 23:42:47 5AB3C1D4 r (reader) srg_v6 [mouse] found card system viaccess
2018/08/25 23:42:47 5AB3C1D4 r (reader) srg_v6 [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/08/25 23:42:47 5AB3C1D4 r (reader) srg_v6 [viaccess] card detected
2018/08/25 23:42:47 1B79256F r (reader) orf_ice [irdeto] ready for requests
2018/08/25 23:42:47 5AB3C1D4 r (reader) srg_v6 [viaccess] serial: ##########
2018/08/25 23:42:47 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 1, id: ####################, sa: ########, geo: empty
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 2, id: ####################, sa: ########, geo: FF FF FF FF
2018/08/25 23:42:48 3C475567 c (client) encrypted cccam-client 84.59.3.163 granted (braini666, au=off)
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 01, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 02, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 03, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 04, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 05, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 3, id: ######################, sa: ########, geo: FF FF FF FF
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 01, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 02, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 03, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 04, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:48 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 05, expiry date: 2018/08/25 - 2018/09/25
2018/08/25 23:42:49 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 02, expiry date: 2018/08/09 - 2018/09/23
2018/08/25 23:42:49 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 4, id: ######################, sa: ########, geo: FF FF FF FF
2018/08/25 23:42:49 7A59818C c (client) encrypted cccam-client 195.13.60.53 rejected (invalid access)
2018/08/25 23:42:49 7A59818C c (client) anonymous disconnected from 195.13.60.53
2018/08/25 23:42:49 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 5, id: ######################, sa: ########, geo: FF FF FF FF
2018/08/25 23:42:50 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 6, id: ######################, sa: ########, geo: FF FF FF FF
2018/08/25 23:43:02 5DA20C72 c (client) encrypted cccam-client 195.13.60.53 rejected (invalid access)
2018/08/25 23:43:02 5DA20C72 c (client) anonymous disconnected from 195.13.60.53/2082/1042B2ED1A462955380EAEA3E5C59AE07E): rejected group (1 ms) (no matching reader)/2082/104:EAE152FEC814D8995A36C271D2CA2390): rejected group (0 ms) (no matching reader)
2018/08/25 23:43:15 69B230D4 c (client) encrypted cccam-client 195.13.60.53 rejected (invalid access)
2018/08/25 23:43:15 69B230D4 c (client) anonymous disconnected from 195.13.60.53
2018/08/25 23:43:28 44441D9B c (client) encrypted cccam-client 195.13.60.53 rejected (invalid access)
2018/08/25 23:43:28 44441D9B c (cccam) account 'debtomek' not found!
2018/08/25 23:43:28 44441D9B c (client) anonymous disconnected from 195.13.60.53

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10653
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/volatile/cache/oscam.log
clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 2
dropdups = 1
lb_mode = 1

[cache]

[cccam]
port = xxxxxxx
nodeid = xxxxxxxxxxxxxxx
version = 2.3.0
reshare = 1

[dvbapi]
#enabled = 1
#au = 1
#pmt_mode = 0
#request_mode = 1
#read_sdt = 1
#write_sdt_prov = 1
#user = server
#boxtype = dreambox

[webif]
httpport = xxxxxxxxxxx
httpuser = root
httppwd = oscam
httphelplang = de
httprefresh = 10
httphideidleclients = 1
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
hideclient_to = 15

[reader]
label = orf_ice
protocol = internal
device = /dev/sci0
caid = 0648
boxid = 12345678
boxkey = 1122334455667788
rsakey = xxxxxxxxxx
force_irdeto = 1
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,3,2,0

[reader]
label = srg_v6
protocol = mouse
device = /dev/ttyUSB0
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0500:060200,060210,060220,060230,060240
group = 2
emmcache = 1,3,2,0

P: 0500:060200 #SRGV6
P: 0500:060210 #SRGV6
P: 0500:060220 #SRGV6
P: 0500:060230 #SRGV6
P: 0500:060240 #SRGV6
I: 0500:040810
I: 0500:040820
I: 0500:023800
P: 0648:000000 #ORFICEirdeto
P: 0500
P: 0BAA
P: 0100
P: 0B01
P: 0B00
P: 1830 #HD+
P: 1843 #HD+
P: 1860 #HD+
P: 186A #HD+
P: 098C #SkyV14
P: 09C4 #SkyV13
P: 4ABF #Redlight HD
P: 186C #Polsat

filius00 · 25. August 2018

Matrix555 schrieb:
Meine SRG V5 Karte ist abgelaufen und hab nun eine neue V6

Nie und nimmer ist in deiner Oscam die V5 gelaufen, wie man diesem Satz entnehmen könnte....
Aber entschuldigt, heute scheint eh der Tag der Märchen zu sein....
Komplette Configs sind Bedingung, sonst wird das nie was....

Matrix555 · 25. August 2018

Ja wie geschrieben ich hab heute Einstellungen verändert, könnte sein das das mit der ehemaligen V5 nicht zusammen paßt. Die V5 ist 5 Jahre gelaufen.

filius00 · 26. August 2018

Matrix555 schrieb:
invalid access)

der Client kann nicht sauber zugreifen, somit passen die Configs definitiv nicht

Matrix555 · 26. August 2018

Das dachte ich mir auch Filius, weils nicht funzt.
Hab aber keinen Plan was ich in den configs noch verändern könnte.

filius00 · 26. August 2018

Auch wenn ich mich wiederhole:
Die Unterschiede zwischen V5 und V6 sind marginal (wenn überhaupt vorhanden)
Somit kann diese nicht so bei dir gelaufen sein, da nicht mal der Client sauber verbindet,
dies hat ja nicht mal mit der eigentlichen Kartenconfig zu tun.
Nochmal: Ohne Komplettaufstellung der Configs wirst du dein Problem selber lösen müssen.

Matrix555 · 26. August 2018

Filius was brauchst denn Du noch für die Komplettaufstellung? Hab doch die Configs hier gepostet.

hier noch mal ein neuer Log

2018/08/26 00:14:51 00000000 s (main) System name = Linux
2018/08/26 00:14:51 00000000 s (main) Host name = sss
2018/08/26 00:14:51 00000000 s (main) Release = 2.6.18-7.4-dm800
2018/08/26 00:14:51 00000000 s (main) Version = #1 Tue Jan 7 22:28:24 CET 2014
2018/08/26 00:14:51 00000000 s (main) Machine = 7401c0
2018/08/26 00:14:51 00000000 s (main) Stb model = dm800
2018/08/26 00:14:51 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6434
2018/08/26 00:14:51 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2018/08/26 00:14:52 00000000 s (config) userdb reloaded: 6 accounts loaded, 0 expired, 0 disabled
2018/08/26 00:14:52 00000000 s (main) signal handling initialized
2018/08/26 00:14:52 00000000 s (config) 2 provid's loaded
2018/08/26 00:14:52 00000000 s (config) 30 service-id's loaded in 11 ms
2018/08/26 00:14:52 00000000 s (net) cccam: initialized (fd=5, port=61927, prio=1)
2018/08/26 00:14:52 00000000 s (reader) orf_ice [internal] creating thread for device /dev/sci0
2018/08/26 00:14:52 00000000 s (reader) srg_v6 [mouse] creating thread for device /dev/ttyUSB0
2018/08/26 00:14:52 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/08/26 00:14:52 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
2018/08/26 00:14:52 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2018/08/26 00:14:52 00000000 s (anticasc) anti cascading disabled
2018/08/26 00:14:52 443583C7 h (webif) webif: decompressed 169124 bytes back into 410112 bytes
2018/08/26 00:14:52 443583C7 h (webif) HTTP Server running. ip=0.0.0.0 port=16033
2018/08/26 00:14:52 1B79256F r (reader) orf_ice [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2018/08/26 00:14:52 1B79256F r (reader) orf_ice [internal] Reader sci internal, detected box type: dm800
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Buffers readed 0 bytes total time_us 74573
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 1 value 03 time_us 2134
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 2 value 11 time_us 14212
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 3 value e7 time_us 506
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 4 value ff time_us 152
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 5 value ff time_us 153
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 6 value 34 time_us 157
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 7 value ae time_us 154
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 8 value bd time_us 165
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 9 value 7f time_us 161
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 10 value d9 time_us 387
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 11 value f6 time_us 222
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Flush readed byte Nr 12 value ff time_us 6730
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Buffers readed 12 bytes total time_us 109769
2018/08/26 00:14:52 5AB3C1D4 r (reader) srg_v6 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2018/08/26 00:14:53 1B79256F r (reader) orf_ice [internal] card detected
2018/08/26 00:14:53 5AB3C1D4 r (reader) srg_v6 [mouse] card detected
2018/08/26 00:14:53 5AB3C1D4 r (reader) srg_v6 [mouse] Buffers readed 0 bytes total time_us 74771
2018/08/26 00:14:53 1F6FF0BF c (client) encrypted cccam-client 195.13.60.53 rejected (invalid access)
2018/08/26 00:14:53 1F6FF0BF c (client) anonymous disconnected from 195.13.60.53
2018/08/26 00:14:54 5AB3C1D4 r (reader) srg_v6 [mouse] ATR: 3F 77 18 00 00 D3 8A 42 01 64 90 00
2018/08/26 00:14:54 5AB3C1D4 r (reader) srg_v6 [mouse] Buffers readed 0 bytes total time_us 74846
2018/08/26 00:14:54 5AB3C1D4 r (reader) srg_v6 [mouse] Init card protocol T0, FI=1, F=372, D=12, N=0
2018/08/26 00:14:54 5AB3C1D4 r (reader) srg_v6 [mouse] Setting baudrate to 115200 bps
2018/08/26 00:14:54 5AB3C1D4 r (reader) srg_v6 [mouse] Calculated work ETU is 8.68 us reader mhz = 357
2018/08/26 00:14:54 1B79256F r (reader) orf_ice [internal] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
2018/08/26 00:14:54 5AB3C1D4 r (reader) srg_v6 [mouse] Buffers readed 0 bytes total time_us 74584
2018/08/26 00:14:54 5AB3C1D4 r (reader) srg_v6 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2018/08/26 00:14:54 1B79256F r (reader) orf_ice [internal] Buffers readed 0 bytes total time_us 74929
2018/08/26 00:14:54 1B79256F r (reader) orf_ice [internal] Init card protocol T0, FI=1, F=372, D=2, N=0
2018/08/26 00:14:54 1B79256F r (reader) orf_ice [internal] Calculated work ETU is 41.33 us reader mhz = 450
2018/08/26 00:14:54 1B79256F r (reader) orf_ice [internal] Buffers readed 0 bytes total time_us 74266
2018/08/26 00:14:55 1B79256F r (reader) orf_ice [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2018/08/26 00:14:55 5AB3C1D4 r (reader) srg_v6 [mouse] using ecm #80b for long viaccess ecm
2018/08/26 00:14:55 5AB3C1D4 r (reader) srg_v6 [mouse] type: Viaccess (non-standard atr), caid: 0500, serial: ##########
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [internal] Hist. Bytes: TÄ
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [internal] detect irdeto card
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [internal] caid: 0648, acs: 0.05, country code: AUT
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [internal] WARNING: For Irdeto cards you will have to set 'mhz= 600' in oscam.server
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [internal] active providers: 4 (a033ff,002500,002600,002700)
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [internal] found card system irdeto
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] entitlements for provider: 1, id: A033FF
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] chid: 000D, date: 2014/06/06 - 2014/07/06
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] chid: 7FF7, date: 2018/08/25 - 2018/09/04
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] chid: 0001, date: 2018/08/24 - 2019/05/02
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] chid: 0002, date: 2018/08/24 - 2019/05/02
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] chid: 7FFB, date: 2017/11/03 - 2017/12/03
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] chid: FFE0, date: 2018/08/24 - 2019/05/02
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] entitlements for provider: 2, id: 002500
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] chid: 001D, date: 2014/06/06 - 2014/09/06
2018/08/26 00:14:56 5AB3C1D4 r (reader) srg_v6 [mouse] providers: 6 (FFF430,060200,060210,060220,060230,060240)
2018/08/26 00:14:56 5AB3C1D4 r (reader) srg_v6 [mouse] Maturity level [0]= older than 0 years
2018/08/26 00:14:56 5AB3C1D4 r (reader) srg_v6 [mouse] ready for requests
2018/08/26 00:14:56 5AB3C1D4 r (reader) srg_v6 [mouse] found card system viaccess
2018/08/26 00:14:56 5AB3C1D4 r (reader) srg_v6 [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2018/08/26 00:14:56 5AB3C1D4 r (reader) srg_v6 [viaccess] card detected
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] entitlements for provider: 4, id: 002700
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] chid: 0031, date: 2014/06/06 - 2014/09/06
2018/08/26 00:14:56 1B79256F r (reader) orf_ice [irdeto] ready for requests
2018/08/26 00:14:57 5AB3C1D4 r (reader) srg_v6 [viaccess] serial: ##########
2018/08/26 00:14:57 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 1, id: ####################, sa: ########, geo: empty
2018/08/26 00:14:57 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 2, id: ####################, sa: ########, geo: FF FF FF FF
2018/08/26 00:14:57 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 01, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:57 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 02, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:57 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 03, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:57 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 04, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:57 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 05, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:58 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 3, id: ######################, sa: ########, geo: FF FF FF FF
2018/08/26 00:14:58 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 01, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:58 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 02, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:58 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 03, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:58 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 04, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:58 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 05, expiry date: 2018/08/25 - 2018/09/25
2018/08/26 00:14:58 5AB3C1D4 r (reader) srg_v6 [viaccess] class: 02, expiry date: 2018/08/09 - 2018/09/23
2018/08/26 00:14:58 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 4, id: ######################, sa: ########, geo: FF FF FF FF
2018/08/26 00:14:59 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 5, id: ######################, sa: ########, geo: FF FF FF FF
2018/08/26 00:14:59 5AB3C1D4 r (reader) srg_v6 [viaccess] provider: 6, id: ######################, sa: ########, geo: FF FF FF FF

filius00 · 26. August 2018

Matrix555 schrieb:
Komplettaufstellung?

Oscam: Conf, Server, User und (ggf.) dvbapi von Server und Client

Matrix555 · 26. August 2018

außer oscam.user ist doch schon alles da hier

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11234
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = server
description = ORF Karte seit 01.06.2014 SRF Karte seit 20.01.2013
au = orf_ice,srg_v5
emmreassembly = 1
group = 1,2,3,4

[account]
#description = dvbapi
#user = server
#group = 2
#emmreassembly = 1
#au = SRGv6

Die Karten stecken im und am Server. Dort sollte das Bild hell werden von SRG.
SRG Karte steckt in der Easymouse.

filius00 · 26. August 2018

Nach meinem Verständnis gibt es 1 Oscam Instanz für die Mouse und eine für den Receiver
oder hast du eine Mouse mit Bildschirm?

Matrix555 · 26. August 2018

Ich glaub so kommen wir nicht weiter, was brauchst Du noch damit Du erkennen kannst was in den Einstellungen nicht richtig ist?
Das Bild soll von der Serverbox kommen und am TV hell werden

Dies nur zur Info.

filius00 · 26. August 2018

Selbst habe ich keine Mouse. Wenn es nur eine Oscam mit Conf, Server, User und dvbapi gibt
dann nehme die Rauten beim dvbapi User in der Conf und User raus und füge dort die Group der
V6 hinzu.

Matrix555 · 26. August 2018

Danke Filius,
jetzt funzt es.
Recht vielen Dank !!! Schwere Geburt wie so oft

filius00 · 26. August 2018

Matrix555 schrieb:
jetzt funzt es.

Na dann is ja gut.

Suche

Suche

Neue SRG Karte V6 wird nicht eingelesen

dodo83

Matrix555

Meister

filius00

Matrix555

Meister

filius00

Matrix555

Meister

filius00

Matrix555

Meister

filius00

Matrix555

Meister

filius00

Matrix555

Meister

filius00

Matrix555

Meister

filius00

Ähnliche Themen

Spenden Unterstützung