gelöst Neue SkySmartcard

[QUincy]

Hallo, habe eine neue Smartcard bekommen, jetzt kann ich keine Sender mehr gucken.
Im Sky Receiver läuft sie, aber in meiner VU+ nicht..
Wenn ich (no entitlements) auslese, steht das hier....siehe Spoiler

Spoiler

="CardsystemValid ToIRD ID (nagra)MaturityProvider videoguard2n/aFF FF FF FFn/a00 00 00 00 (sysid) SerialRomATR KWTV------------------------------------------------------------Country Code (NDS)Region Code (NDS)Pin (NDS)Credit (NDS)Fuse (NDS)Payload (NDS) 0F 06 DEUDEU000011967n/a2500 00 00 00 00 00 TypeCaidProvidIDClassStart DateExpire DateName tier098E000000000000000000003F000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E0000000000000000000041000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E0000000000000000000064000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E0000000000000000000070000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E0000000000000000000071000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E000000000000000000007B000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E000000000000000000007D000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E0000000000000000000081000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E000000000000000000008E000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000C0000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000C1000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000C9000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000CA000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000CD000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000CE000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000CF000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000D8000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000D4000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000D5000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000D6000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000E0000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000E9000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000E2000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000EA000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000E3000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000EB000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000E4000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000E5000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000F3000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German tier098E00000000000000000000FF000000002015-12-312020-11-24Kabel BW [NDS3] / Cable / German"]

 

[SuperSzabo]

Welche hast du denn bekommen? Satellit oder Kabel? Wenn Kabel: welcher Anbieter?

 

[QUincy]

Kabel, Unitymedia

 

[SuperSzabo]

Dann bitte noch alle Configs liefern...

 

[QUincy]

Server

 

[borsel]

? ?

 

[QUincy]

Spoiler

[reader]
label = Home
protocol = internal
device = /dev/sci0
key = 0000
caid = 1838,1835,1722
boxkey = 0000
detect = cd
mhz = 600
cardmhz = 600
ident = 1722:000000,001102,FFFFFF;1835:000000,001102,1F1F1F
group = 1
emmcache = 1,1,2,0
disablecrccws = 1

Habe den Key mit nuller ersetzt

 

[borsel]

Poste bitte alle Oscam-Configs in Spoilern....

 

[telecomic]

Müsste es dann nicht ein NDS V23 Karte sein... oder hast du eine UM02 Nagra Karte

Spoiler: Reader

[reader]
label = V23
protocol = internal
device = /dev/sci0
caid = 098E
boxid = 12345678
ins7e11 = 15
detect = cd
autospeed = 1
group = 1
emmcache = 1,1,2,0


[reader]
label = UM02
protocol = internal
device = /dev/sci0
caid = 1838
rsakey = B5.....FF
boxkey = A7....7C
detect = cd
autospeed = 1
group = 1
emmcache = 1,1,2,0

 

[adas]

Das ist doch v23

Cau Adas

 

[QUincy]

Ich kann keinen Spoiler einfügen.

Spoiler: Reader

[reader]
label = Home
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 1838,1835,1722
boxkey = 0000
detect = cd
mhz = 600
cardmhz = 600
ident = 1722:000000,001102,FFFFFF;1835:000000,001102,1F1F1F
group = 1
emmcache = 1,1,2,0
disablecrccws = 1

Spoiler: Global

[global]
logfile = /tmp/oscam.log
netprio = 1
nice = -1
maxlogsize = 1000
preferlocalcards = 1
failbantime = 500
disablecrccws = 1

[cccam]
port = 0000
nodeid = 0000
version = 2.3.0
reshare = 1
stealth = 1
recv_timeout = 7000

[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
delayer = 60


[webif]
httpport = 9001
httpuser =
httppwd =
httpcss = /etc/tuxbox/config/oscam-trunk/Blue_Shadow_V.2.3.css
httphelplang = de
http_prepend_embedded_css = 1
httprefresh = 90
httpshowpicons = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

Spoiler: User

[account]
user = ....
caid = 1835,1838,1722,098E
uniq = 1
au = 1
betatunnel = 1835.FFFF:1722
group = 1,2,3,4,5,6,7,8,9

 

[Vigor]

Wie schon angemerkt, fehlt dir zur neuen Karte V23 die passende Caid 098E.

Hier kannst du ein paar Vorschläge nachlesen.

Oscam.server - Konfigurationsvorschläge für diverse Karten

Hallo Zusammen, hier findet Ihr eine Übersicht der wichtigsten Reader Konfigurationen für diverse Karten! Hier wird nur die Grundkonfiguration für Oscam.server beschrieben. Vorab aber eine kleine Einleitung... Wofür ist die Oscam.server da? In der Oscam.server werden die Reader konfiguriert...

www.digital-eliteboard.com

Gruß
Vigor

 

[QUincy]

Spoiler: DvbApi

# dvbapi configuration
#
# types:
# P - Priority
# format:
# P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# I - Ignore
# format:
# I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
# M - Map
# format:
# M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
# D - Delay
# format:
# D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
#
#
#

# Delay answers that come too fast (e.g. from cache)
D: 0500 90
D: 1830 320
D: 1838 320
D: 1843 320
D: 1860 320
D: 186A 320
D: 098C 120
D: 098D 120
D: 098E 120
D: 09C4 120

# Schweizer Fernsehen
#P: 0500:040810 # SRG v4
#P: 0500:040820 # SRG v4
#P: 0500:040830 # SRG v4
#P: 0500:050800 # SRG v5
#P: 0500:050810 # SRG v5
#P: 0500:060200 # SRG v6
#P: 0500:060210 # SRG v6

# ORF
#P: 0D95 # ORF ICE
#P: 0D98 # ORF ICE
#P: 0648 # ORF
#P: 0650 # ORF

# Astra HD+
#P: 1830 # HD01
#P: 1843 # HD02
#P: 1860 # HD03
#P: 186A # HD04

# Sky Sat V13/V14/V15
#P: 09C4 # V13
#P: 098C # V14
#P: 098D # V15

#enter your with P: your preferred Caid

#P: 183D
#P: 098C
#P: 1810





read_sdt = 2
write_sdt_prov = 1

 

[pehedima]

Lösche mal die Parameter CAID und IDENT im Reader, starte oscam neu und poste die oscam.log vom oscam start an.

 

[adas]

Was ist das für müll hier, NDS ist nicht N

Org. kiste ist richtig für dich.

Cau Adas