MI_Beta_oRK_7490_06.88-rev45155_labor-freetz-devel-14320M.de mit Quadmouse Cardreader verlinken !

[Joerg62]

Hallo habe da mal eine frage, mir hat Gismotro folgendes Image gebaut.

Sie müssen registriert sein, um Links zu sehen.

Hier nun mein Problem, die Quadmouse lässt sich nicht ansprechen damit.

Unter Freetz hab ich Udev first drin, leider bringt das nix !

Spoiler: Udev first

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="Reader C7F957F", SYMLINK+="HD+"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{interface}=="Quad RS232-HS", ATTRS{bInterfaceNumber}=="00", SYMLINK+="quad1"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{interface}=="Quad RS232-HS", ATTRS{bInterfaceNumber}=="01", SYMLINK+="quad2"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{interface}=="Quad RS232-HS", ATTRS{bInterfaceNumber}=="02", SYMLINK+="quad3"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{interface}=="Quad RS232-HS", ATTRS{bInterfaceNumber}=="03", SYMLINK+="quad4"

Nun ist ja der Punkt neu, unter Freetz und dort wird mir das angezeigt !

Was muss ich hier eintragen als Serial Reader1 2 3 und 4

Spoiler: Serial aller angeschlossenen USB-Geräte

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=5000 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 3.00 Cls=09(hub ) Sub=00 Prot=03 MxPS= 9 #Cfgs= 1
P: Vendor=1d6b ProdID=0003 Rev= 3.10
S: Manufacturer=Linux 3.10.73 xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 2
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.10
S: Manufacturer=Linux 3.10.73 xhci_hcd
S: Product=xHCI Host Controller
S: SerialNumber=0000:01:00.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0403 ProdID=6011 Rev= 8.00
S: Manufacturer=FTDI
S: Product=Quad RS232-HS
C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

OScam-Log info

Spoiler: Log

2017/06/28 12:06:47 5F05FF95 r (reader) MTV [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/06/28 12:06:47 28A2767F r (reader) D02 [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/06/28 12:06:47 28A2767F r (reader) D02 [mouse] Error getting card status.
2017/06/28 12:06:47 5F05FF95 r (reader) MTV [mouse] Error getting card status.
2017/06/28 12:06:48 7CE9E314 r (reader) G09 [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/06/28 12:06:48 7CE9E314 r (reader) G09 [mouse] Error getting card status.
2017/06/28 12:06:48 5F05FF95 r (reader) MTV [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/06/28 12:06:48 28A2767F r (reader) D02 [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/06/28 12:06:48 28A2767F r (reader) D02 [mouse] Error getting card status.
2017/06/28 12:06:48 5F05FF95 r (reader) MTV [mouse] Error getting card status.
2017/06/28 12:06:49 7CE9E314 r (reader) G09 [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/06/28 12:06:49 7CE9E314 r (reader) G09 [mouse] Error getting card status.
2017/06/28 12:06:49 28A2767F r (reader) D02 [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error
2017/06/28 12:06:49 28A2767F r (reader) D02 [mouse] Error getting card status.
2017/06/28 12:06:49 5F05FF95 r (reader) MTV [mouse] ERROR: IO_Serial_GetStatus: ioctl(TIOCMGET): Input/output error

 

[rolu2]

Hat das ohne Laborversion geklappt?

Schau mal hier

Edit: Immer daran denken, das es eine Laborversion ist

 

[Joerg62]

Das habe ich noch nicht getestet , aber werde es heute Abend testen.

Gruss
Joerg62