AW: mbox und newcs
also so sieht telnet aus
und hier ist die newcs.xml.
bitte hilft mir :JC_hmmm:
also so sieht telnet aus
PHP:
have fun with KEYWELT on your Philips D-BOX2 - Kernel 2.4.36.6-dbox2 (20:49:33).
..
dbox login: root
BusyBox v1.7.2 (2009-01-18 11:12:15 CET) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # cd bin
/var/bin # newcs
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:49:31
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is enabled, set to: webinterfacepasswd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 20:49:42 ] [ Box detect ] Box type 4 (Dbox2)
[ 20:49:42 ] [ Config ] Option <blockc0> for device 0 (Multicam) not present, de
faulting to NO
[ 20:49:42 ] [ Config ] Value in <ipk> for device 0 (Multicam) is INVALID, skipp
ing...
[ 20:49:42 ] [ Config ] Value in <ucpk> for device 0 (Multicam) is INVALID, skip
ping...
[ 20:49:42 ] [ Config ] Pincode for device 0 (Multicam): 0000
[ 20:49:42 ] [ Config ] /dev/tts/1 ECM priority: round
[ 20:49:42 ] [ EMM Cache ] Initialising dynamic Cache
[ 20:49:42 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 536
[ 20:49:42 ] [ Loader ] Starting Telnet on port 1001
[ 20:49:42 ] [ Loader ] Reader type 4 on node /dev/tts/1
[ 20:49:42 ] [ Dbox ] Opening device /dev/tts/1
[ 20:49:42 ] bind: error! 98: Address already in use
[ 20:49:44 ] [ ATR ] T=0 1etu=5.17us Guardtime:12etu WWT:115200etu
[ 20:49:44 ] [ ATR ] Historical bytes: [C2] G @ [00] h [90] [00]
[ 20:49:44 ] [ Loader ] Init Viaccess card
[ 20:49:44 ] [ Keyman ] Adding key 000000be264c18 type 0 on Provider 000000 for
caid 0500 ID=0
[ 20:49:44 ] [ Keyman ] Adding key 000000be264c18 type 1 on Provider FFF830 for
caid 0500 ID=0
[ 20:49:44 ] [ Keyman ] Adding key 000000be264c18 type 1 on Provider 024400 for
caid 0500 ID=1
[ 20:49:45 ] [ Keyman ] Adding key 000000be264c18 type 1 on Provider 024410 for
caid 0500 ID=2
[ 20:49:45 ] [ Loader ] Card 0500 on port /dev/tts/1 ready
[ 20:49:45 ] [ Loader ] Starting Newcamd Server on port 25030
[ 20:49:45 ] [ NewCS ] Ready to GO! :)
/var/bin # [ 20:49:45 ] [ Newcamd ] Newcamd thread Server started on port 25030
[ 20:49:45 ] bind: error! 98: Address already in useund hier ist die newcs.xml.
PHP:
<?xml version="1.0" ?>
- <!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Dbox.
-->
- <newCSconfig>
- <readers name="Dbox">
- <device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>00000000</boxkey>
- <!-- <rsa>0000000000</rsa>
-->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>25030</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
- <radegastserver>
<enabled>No</enabled>
<port>16000</port>
- <allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
- <cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
- <debug>
<password>webinterfacepasswd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
- <newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
- <user>
<name>server</name>
<password>passwort</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
- <user>
<name>server2</name>
<password>passwort2</password>
<hostname>localhost2</hostname>
<port>12000</port>
<au>off</au>
<sidoverride>off</sidoverride>
<spider>off</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>bitte hilft mir :JC_hmmm: