Karten werden von Oscam nicht gelesen und alle Klienten sind offline

[julia]

Hi,

Habe meinen Igel neu installiert die Proxis rennen, aber meine eigenen Karten werden im Smargo vom Igel nicht mehr erkannt, habe nach der Neuinstalation die 8821 draufgebügelt und die Server und Clientdaten wieder eingefügt
auch alle User sind offline

z. B. Reader ORF:

Spoiler

[reader]
label = ORF
protocol = smartreader
device = Serial:Reader D82477E
services = orf
caid = 0D05
detect = cd
mhz = 800
ident = 0D05:000004
group = 1
emmcache = 1,1,2

Julia

 

[Gelöschtes Mitglied 104301]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

Hi,

da wird dir ohne Log vom Oscam Start vermutlich Niemand weiter helfen können.
Wahrscheinlich ist, das ein Reader nicht richtig eingebunden ist, dies erzeugt gelegentlich den von dir beschriebenen Zustand.

Gruss USCMAI

 

[julia]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

Hier der Log Auszug

Spoiler

>> OSCam << cardserver started at Wed Aug 7 19:37:14 2013
-------------------------------------------------------------------------------
2013/08/07 19:37:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8821 (i486-linux-gnu)
2013/08/07 19:37:14 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 21483
2013/08/07 19:37:14 0 s services reloaded: 0 services freed, 15 services loaded, rejected 0
2013/08/07 19:37:15 0 s AES key length error .. not adding
2013/08/07 19:37:15 0 s 0 AES key(s) added on reader TNT for 0500:030b00
2013/08/07 19:37:15 0 s userdb reloaded: 74 accounts loaded, 0 expired, 0 disabled
2013/08/07 19:37:15 0 s signal handling initialized
2013/08/07 19:37:15 0 s 889 service-id's loaded in 6ms
2013/08/07 19:37:15 0 s camd35: initialized (fd=5, port=13010)
2013/08/07 19:37:15 0 s cccam: initialized (fd=6, port=12000)
2013/08/07 19:37:15 0 s cccam: initialized (fd=7, port=13005)
2013/08/07 19:37:15 0 s ORF [smartreader] creating thread for device Serial:Reader D82477E
2013/08/07 19:37:15 0 s SRG [smartreader] creating thread for device Serial:Reader D3802FE
2013/08/07 19:37:15 0 s Austriasat [smartreader] creating thread for device Serial:Reader BBCE606
2013/08/07 19:37:15 0 s Hustler [smartreader] creating thread for device Serial:Reader D03E68F
2013/08/07 19:37:15 0 s TNT [smartreader] creating thread for device Serial:Reader FD4D5D5
2013/08/07 19:37:15 0 s camd3emu [camd35] creating thread for device 127.0.0.1
2013/08/07 19:37:15 A1EE2D0 p camd35 proxy 127.0.0.1:20248
2013/08/07 19:37:15 A1EE2D0 p camd3emu [camd35] proxy initialized, server 127.0.0.1:20248
2013/08/07 19:37:15 A1EC718 r TNT [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/07 19:37:15 0 s loadbalancer: can't read from file /var/log/ipc/stat
2013/08/07 19:37:15 0 s waiting for local card init
2013/08/07 19:37:15 A258E40 h webif: decompressed 53050 bytes back into 152380 bytes
2013/08/07 19:37:15 A258E40 h HTTP Server running. ip=0.0.0.0 port=16032
2013/08/07 19:37:15 A1EAB60 r Hustler [smartreader] Reader initialized (device=Serial:Reader D03E68F, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A1E8FA8 r Found reader with serial Reader BBCE606 at 003:003
2013/08/07 19:37:15 A1E8FA8 r Found smartreader device Serial:Reader BBCE606
2013/08/07 19:37:15 A1E8FA8 r Austriasat [smartreader] Reader initialized (device=Serial:Reader BBCE606, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A1D0AC0 r SRG [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/07 19:37:15 A1D0AC0 r Found reader with serial Reader D3802FE at 004:003
2013/08/07 19:37:15 A1D0AC0 r Found smartreader device Serial:Reader D3802FE
2013/08/07 19:37:15 A1EAB60 r Hustler [smartreader] Reader initialized (device=Serial:Reader D03E68F, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A1E8FA8 r Found reader with serial Reader BBCE606 at 003:003
2013/08/07 19:37:15 A1E8FA8 r Found smartreader device Serial:Reader BBCE606
2013/08/07 19:37:15 A1E8FA8 r Austriasat [smartreader] Reader initialized (device=Serial:Reader BBCE606, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A1D0AC0 r SRG [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/07 19:37:15 A1D0AC0 r Found reader with serial Reader D3802FE at 004:003
2013/08/07 19:37:15 A1D0AC0 r Found smartreader device Serial:Reader D3802FE
2013/08/07 19:37:15 A1CEF08 r ORF [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/07 19:37:15 A1D0AC0 r SRG [smartreader] Reader initialized (device=Serial:Reader D3802FE, detect=cd, mhz=369, cardmhz=357)
2013/08/07 19:37:15 A1CEF08 r Found reader with serial Reader D82477E at 004:002
2013/08/07 19:37:15 A1CEF08 r Found smartreader device Serial:Reader D82477E
2013/08/07 19:37:15 A1CEF08 r ORF [smartreader] Reader initialized (device=Serial:Reader D82477E, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A204B28 p ric [cccam] connect failed: Connection refused
2013/08/07 19:38:26 A1EC718 r TNT [smartreader] usb bulk write failed : ret = -7
2013/08/07 19:38:47 0 Hustler [smartreader] SR: USB bulk read failed with error 1
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -1
2013/08/07 19:38:47 0 Hustler [smartreader] SR: USB bulk read failed with error 1
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -1
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:47 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:48 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:48 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:48 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:49 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:49 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:50 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:50 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:50 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:51 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:51 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:51 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:52 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] Error activating card.
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:52 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:52 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:53 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:53 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:53 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:54 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:54 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:54 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:55 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:55 0 --- Skipped 4 duplicated log lines ---

 

[Gelöschtes Mitglied 104301]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

Hi,

wie du unschwer erkennen kannst, stimmt mit dem 'Hustler' Reader was nicht, der erzeugt ja einen Haufen errors, am besten erstmal versuchen ohne diesen Reader zu starten.

Gruss USCMAI

 

[julia]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

Hallo,

habe ich auch schon gemacht, aber leider ohne Erfolg, alle Klienten auch intern sind off und die restlichen lokalen Reader auch

Julia

 

[Gelöschtes Mitglied 104301]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

dann wäre ja ein Log ohne den Hustler Reader nicht schlecht...... könnte natürlich auch an einem USB Hub liegen, wenn du ohne den Hustler Reader startest musst du diesen auch aus der OSCAM.server raus nehmen, sonst startet OSCAM ggf. auch nicht richtig!

Gruss USCMAI

 

[laila-no1]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

hi,

hat dein Igel nach der Neuinstallation eventuell eine andere IP als vorher?
Wenn ja stimmt natürlich die Portweiterleitung im Router nicht mehr und solltest du abändern.

 

[julia]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

Hier der Log ohne Hustler,
der Igel hat die gleiche IP und ich habe die Karten ohne HUB angeschlossen

Julia

Spoiler

>> OSCam << cardserver started at Wed Aug 7 19:37:14 2013
-------------------------------------------------------------------------------
2013/08/07 19:37:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8821 (i486-linux-gnu)
2013/08/07 19:37:14 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 21483
2013/08/07 19:37:14 0 s services reloaded: 0 services freed, 15 services loaded, rejected 0
2013/08/07 19:37:15 0 s AES key length error .. not adding
2013/08/07 19:37:15 0 s 0 AES key(s) added on reader TNT for 0500:030b00
2013/08/07 19:37:15 0 s userdb reloaded: 74 accounts loaded, 0 expired, 0 disabled
2013/08/07 19:37:15 0 s signal handling initialized
2013/08/07 19:37:15 0 s 889 service-id's loaded in 6ms
2013/08/07 19:37:15 0 s camd35: initialized (fd=5, port=13010)
2013/08/07 19:37:15 0 s cccam: initialized (fd=6, port=12000)
2013/08/07 19:37:15 0 s cccam: initialized (fd=7, port=13005)
2013/08/07 19:37:15 0 s ORF [smartreader] creating thread for device Serial:Reader D82477E
2013/08/07 19:37:15 0 s SRG [smartreader] creating thread for device Serial:Reader D3802FE
2013/08/07 19:37:15 0 s Austriasat [smartreader] creating thread for device Serial:Reader BBCE606
2013/08/07 19:37:15 0 s Hustler [smartreader] creating thread for device Serial:Reader D03E68F
2013/08/07 19:37:15 0 s TNT [smartreader] creating thread for device Serial:Reader FD4D5D5
2013/08/07 19:37:15 0 s camd3emu [camd35] creating thread for device 127.0.0.1
2013/08/07 19:37:15 A1EE2D0 p camd35 proxy 127.0.0.1:20248
2013/08/07 19:37:15 A1EE2D0 p camd3emu [camd35] proxy initialized, server 127.0.0.1:20248
2013/08/07 19:37:15 A1EC718 r TNT [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/07 19:37:15 0 s loadbalancer: can't read from file /var/log/ipc/stat
2013/08/07 19:37:15 0 s waiting for local card init
2013/08/07 19:37:15 A258E40 h webif: decompressed 53050 bytes back into 152380 bytes
2013/08/07 19:37:15 A258E40 h HTTP Server running. ip=0.0.0.0 port=16032
2013/08/07 19:37:15 A1EAB60 r Hustler [smartreader] Reader initialized (device=Serial:Reader D03E68F, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A1E8FA8 r Found reader with serial Reader BBCE606 at 003:003
2013/08/07 19:37:15 A1E8FA8 r Found smartreader device Serial:Reader BBCE606
2013/08/07 19:37:15 A1E8FA8 r Austriasat [smartreader] Reader initialized (device=Serial:Reader BBCE606, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A1D0AC0 r SRG [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/07 19:37:15 A1D0AC0 r Found reader with serial Reader D3802FE at 004:003
2013/08/07 19:37:15 A1D0AC0 r Found smartreader device Serial:Reader D3802FE
2013/08/07 19:37:15 A1EAB60 r Hustler [smartreader] Reader initialized (device=Serial:Reader D03E68F, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A1E8FA8 r Found reader with serial Reader BBCE606 at 003:003
2013/08/07 19:37:15 A1E8FA8 r Found smartreader device Serial:Reader BBCE606
2013/08/07 19:37:15 A1E8FA8 r Austriasat [smartreader] Reader initialized (device=Serial:Reader BBCE606, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A1D0AC0 r SRG [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/07 19:37:15 A1D0AC0 r Found reader with serial Reader D3802FE at 004:003
2013/08/07 19:37:15 A1D0AC0 r Found smartreader device Serial:Reader D3802FE
2013/08/07 19:37:15 A1CEF08 r ORF [smartreader] Using 0x01/0x82 as endpoint for smartreader hardware detection
2013/08/07 19:37:15 A1D0AC0 r SRG [smartreader] Reader initialized (device=Serial:Reader D3802FE, detect=cd, mhz=369, cardmhz=357)
2013/08/07 19:37:15 A1CEF08 r Found reader with serial Reader D82477E at 004:002
2013/08/07 19:37:15 A1CEF08 r Found smartreader device Serial:Reader D82477E
2013/08/07 19:37:15 A1CEF08 r ORF [smartreader] Reader initialized (device=Serial:Reader D82477E, detect=cd, mhz=800, cardmhz=357)
2013/08/07 19:37:15 A204B28 p ric [cccam] connect failed: Connection refused
2013/08/07 19:38:26 A1EC718 r TNT [smartreader] usb bulk write failed : ret = -7
2013/08/07 19:38:47 0 Hustler [smartreader] SR: USB bulk read failed with error 1
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -1
2013/08/07 19:38:47 0 Hustler [smartreader] SR: USB bulk read failed with error 1
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -1
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:47 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:47 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:48 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:48 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:48 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:48 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:49 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:49 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:49 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:50 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:50 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:50 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:51 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:51 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:51 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:51 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:52 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] Error activating card.
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:52 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:52 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:52 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:53 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:53 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:53 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:54 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:54 0 --- Skipped 4 duplicated log lines ---
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:54 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:54 A1EAB60 r Hustler [smartreader] set of rts/dtr failed
2013/08/07 19:38:55 0 --- Skipped 1 duplicated log lines ---
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] FTDI purge of RX buffer failed
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] Setting new baudrate failed
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] set flow control failed
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] Setting new line property failed
2013/08/07 19:38:55 A1EAB60 r Hustler [smartreader] usb bulk write failed : ret = -4
2013/08/07 19:38:55 0 --- Skipped 4 duplicated log lines ---

 

[Gelöschtes Mitglied 104301]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

mhh.... setz in deine Reader mal 'Smargopatch = 1' rein.

Gruss USCMAI

 

[mxer]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

usb bulk write failed : ret = -7
Kenne ich nur von Fritten. Die wollten ein Reboot haben, wenn der o.g. Fehler auftrat.

 

[Gelöschtes Mitglied 104301]

AW: Karten werden von Oscam nicht gelesen und alle Klienten sind offline

@mxer: ja richtig oder der Eintrag Smargopatch = 1 half da, wenn das Ganze garnicht startet, aber bei einem Igel .... komisch

 

[julia]

Hi,

habe ich gemacht und den Igel neu gestartet, leider ohne Erfolg

Spoiler

Bild ist nicht mehr aktiv.

Hi,

Reboot habe ich auch schon mehrmals ohne Erfolg gemacht

Julia

an den Einstellungen sollte es auch nicht liegen, da ich sie die ganze zeit so hatte

Reader:

Spoiler

[reader]
label = ORF
protocol = smartreader
device = Serial:Reader D82477E
services = orf
caid = 0D05
detect = cd
mhz = 800
ident = 0D05:000004
group = 1
emmcache = 1,1,2


[reader]
label = SRG
protocol = smartreader
device = Serial:Reader D3802FE
services = srg,!noECM
caid = 0500
detect = cd
mhz = 369
ident = 0500:023800
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
##auprovid = 003801
#ecmwhitelist = 0500@023800:30


[reader]
label = Austriasat
protocol = smartreader
device = Serial:Reader BBCE606
services = austriasat,!noECM
caid = 0D05
detect = cd
mhz = 800
ident = 0D05:000010
group = 3
emmcache = 1,1,2


#[reader]
#label = Hustler
#protocol = smartreader
#device = Serial:Reader D03E68F
#services = hustler
#caid = 0500
#detect = cd
#mhz = 800
#ident = 0500:050F00,FFF8F0
#group = 4
#emmcache = 1,1,2


#[reader]
#label = ORF ICE
#protocol = smartreader
#device = Serial:Reader A8FA4C5
#services = orf,!noECM
#caid = 0D95
#detect = cd
#mhz = 800
#ident = 0D95:000004
#group = 5
#emmcache = 1,1,2


[reader]
label = TNT
protocol = smartreader
device = Serial:Reader FD4D5D5
services = tnt
caid = 0500
detect = cd
mhz = 800
cardmhz = 500
ident = 0500:030B00
aeskeys = 0500@030B00:0,0,0,0,0,0,0,0,0,0,0,0,9A3EAB0203EBFF CA85B4F18280749F56
group = 50
emmcache = 1,1,2


[reader]
label = camd3emu
protocol = camd35
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 7
caid = 0D03,0100,0D00,1801
ident = 0D03:000004;0D03:000008;0100:000030;0D00:000030;1801:00C102