ipc mit HD+ 002 Karte und 003 Karte

[Gallo4444]

Hallo,
ich habe zeit 2 Wochen einen HD+ 002 Karte.
Mit scam funktioniert die Karte in einen Vu+ Reciever.
Im ipc habe ich die letzte Oscam mit scam (10652).
Wie muss ich konfigurieren das es lauft:
HD+ muss doch zuerst über smargo Protokoll gelesen werden, aber oscam kann nicht lesen.
HD+ über scam Protokoll kann man nicht device smargo angeben.
Bitte um Hilfe:emoticon-0106-cryin
Der Frenchy

 

[dodo83]

AW: ipc mit HD+ 002 Karte und 003 Karte

hi,
ist kein IPC Problem, eher Konfigurations Fehler, daher in den OScam Bereich Verschoben

poste mal deine Config und ein log ab start der OScam?
welche Hardware?
als Reader kommt ein Smargo zum Einsatz?

 

[Gallo4444]

AW: ipc mit HD+ 002 Karte und 003 Karte

Mein konfiguration:

oscam version

Spoiler

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

[global]

Spoiler

enableled = 0
disablelog = 0
loghistorysize = 4096
serverip = 192.168.2.60
logfile = /var/log/ipc/OScam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 10200
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir =
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[cccam]
port = xxxx
serverip = 192.168.2.60
nodeid = xxxxx
version = 2.1.4
reshare = 1
reshare_mode = 4
ignorereshare = 1
forward_origin_card = 1
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

[scam]
port = 9999
serverip =
allowed =

[webif]
etc.....

[reader]

Spoiler

label = Hd_smargo
description = HD smargo
enable = 1
protocol = smargo
device = /dev/ttyUSB1
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
caid = 1843
atr =
boxid =
boxkey =
rsakey =
ins7e =
ins7e11 =
ins2e06 =
fix07 = 0
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 534
cardmhz = 369
ident =
chid =
class =
aeskeys =
group = 5
emmcache = 1,1,2,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = 2
ccchop = 1
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 0

user

Spoiler

[account]
disabled = 0
user = user
pwd = pass
description =
hostname =
caid =
uniq = 0
sleepsend = 0
failban = 0
monlevel = 0
sleep = 0
suppresscmd08 = 0
umaxidle = -1
keepalive = 0
emmreassembly = 2
expdate =
allowedprotocols =
allowedtimeframe =
betatunnel =
group = 1,2,3,4,5,6,7,8
services =
preferlocalcards = -1
ident =
chid =
class =
cccmaxhops = 10
cccreshare = -1
cccignorereshare = -1
cccstealth = -1
cwc_disable = 0

 

[czutok]

AW: ipc mit HD+ 002 Karte und 003 Karte

die HD+ 03 wird aber 100% NICHT laufen

 

[dodo83]

AW: ipc mit HD+ 002 Karte und 003 Karte

[h=2]mit HD+ 002 Karte und 003 Karte[/h]

zu deinem Thread Thema
die HD03 ist nicht sharebar

welche Oscam Version?
httpsavefullcfg auf 0 setzen, deine ist völlig unübersichtlich
RSA/BOXKEY fehlt im Reader
log ab start der OScam?

 

[Gallo4444]

AW: ipc mit HD+ 002 Karte und 003 Karte

Danke für die 003 habe ich nicht gewusste.

Oscam version:
Unix starttime: 1430745307
Starttime: 04.05.2015 15:15:07
Version: oscam-1.20-unstable_svn-r10652
Compiler: arm-linux-gnueabi
Box type: generic (generic)
ConfigDir: /var/etc/
WebifPort: 16001



[reader]

Spoiler

label = Hd_smargo
description = HD smargo
enable = 1
protocol = smargo
device = /dev/ttyUSB1
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
caid = 1843
atr =
boxid =
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
ins7e =
ins7e11 =
ins2e06 =
fix07 = 0
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 534
cardmhz = 369
ident =
chid =
class =
aeskeys =
group = 5
emmcache = 1,1,2,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = 2
ccchop = 1
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 0

Log:

Spoiler

• 2015/05/04 21:00:37 120318 h (reader) Hd_smargo [smargo] Restarting reader
• 2015/05/04 21:00:37 120318 h (reader) Hd_smargo [smargo] creating thread for device /dev/ttyUSB1
• 2015/05/04 21:00:38 187A70 r (reader) Hd_smargo [smargo] Buffers readed 0 bytes total time_us 75130
• 2015/05/04 21:00:38 187A70 r (reader) Hd_smargo [smargo] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz= AUTO, cardmhz=369)
• 2015/05/04 21:00:38 187A70 r (reader) Hd_smargo [smargo] card detected
• 2015/05/04 21:00:43 187A70 r (reader) Hd_smargo [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2015/05/04 21:00:43 187A70 r (reader) Hd_smargo [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2015/05/04 21:00:43 187A70 r (reader) Hd_smargo [smargo] Calculated work ETU is 5.99 us reader mhz = 534
• 2015/05/04 21:00:43 187A70 r (reader) Hd_smargo [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
• 2015/05/04 21:00:44 187A70 r (reader) Hd_smargo [smargo] Warning: Card returned error on setting ifsd value to 160
• 2015/05/04 21:00:45 187A70 r (reader) Hd_smargo [smargo] detect native nagra card
• 2015/05/04 21:00:46 187A70 r (reader) Hd_smargo [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/05/04 21:00:47 187A70 r (reader) Hd_smargo [smargo] T1 Resync command error, trying to reactivate!
• 2015/05/04 21:00:52 187A70 r (reader) Hd_smargo [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2015/05/04 21:00:52 187A70 r (reader) Hd_smargo [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2015/05/04 21:00:52 187A70 r (reader) Hd_smargo [smargo] Calculated work ETU is 5.99 us reader mhz = 534
• 2015/05/04 21:00:52 187A70 r (reader) Hd_smargo [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
• 2015/05/04 21:00:53 187A70 r (reader) Hd_smargo [smargo] Warning: Card returned error on setting ifsd value to 160
• 2015/05/04 21:00:54 187A70 r (reader) Hd_smargo [smargo] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2015/05/04 21:00:55 187A70 r (reader) Hd_smargo [smargo] T1 Resync command error, trying to reactivate!
• 2015/05/04 21:01:00 187A70 r (reader) Hd_smargo [smargo] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
• 2015/05/04 21:01:00 187A70 r (reader) Hd_smargo [smargo] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2015/05/04 21:01:00 187A70 r (reader) Hd_smargo [smargo] Calculated work ETU is 5.99 us reader mhz = 534
• 2015/05/04 21:01:00 187A70 r (reader) Hd_smargo [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
• 2015/05/04 21:01:01 187A70 r (reader) Hd_smargo [smargo] Warning: Card returned error on setting ifsd value to 160
• 2015/05/04 21:01:01 187A70 r (reader) Hd_smargo [smargo] card system not supported
• 2015/05/04 21:01:01 187A70 r (reader) Hd_smargo [smargo] Normal mode failed, reverting to Deprecated Mode

httpsavefullcfg auf 0 setzen: habe ich gemacht.

 

[Zwenny]

AW: ipc mit HD+ 002 Karte und 003 Karte

lösch mal die erste Zeile deines Logs mit der öffentlichen IP von Laeticia

 

[Gallo4444]

AW: ipc mit HD+ 002 Karte und 003 Karte

Danke habe nicht aufgepasst