IPC installiert, was nun?

dodo83 · 19. März 2014

AW: IPC installiert, was nun?

ok
dann fange ich mal an

zu oscam.conf

Code:

[COLOR=#333333][global][/COLOR]
[COLOR=#333333]disablelog = 0[/COLOR]
[COLOR=#333333]logfile = /var/log/ipc/OScam.log[/COLOR]
[COLOR=#333333]maxlogsize = 2480[/COLOR]
[COLOR=#333333]saveinithistory = 1[/COLOR]
[COLOR=#333333]loghistorysize = 4096[/COLOR]

[cccam]
port                          = 22000
version                       = 2.3.0
reshare                       = 1

[COLOR=#333333][webif][/COLOR]
[COLOR=#333333]httpport = 16002[/COLOR]
[COLOR=#333333]httpuser = xxxx[/COLOR]
[COLOR=#333333]httppwd = xxxx[/COLOR]
[COLOR=#333333]httprefresh = 15[/COLOR]
[COLOR=#333333]httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255[/COLOR]
[COLOR=#333333]httpreadonly = 0[/COLOR]
[COLOR=#ff0000]httpsavefullcfg = 0[/COLOR]

hier lieber das CCcam protokoll benutzen anstatt des NewCamd
httpsavefullcfh auf 0 stellen, damit werden die ganzen default werte con oscam ausgeblendet

zu oscam.server

Code:

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = sky_v13[/COLOR]
[COLOR=#3E3E3E]protocol = mouse[/COLOR]
[COLOR=#3E3E3E]device = /dev/ttyUSB0[/COLOR]
[COLOR=#3E3E3E]boxid = 12345678[/COLOR]
[COLOR=#3E3E3E]ins7e11 = 15[/COLOR]
[COLOR=#3E3E3E]detect = cd[/COLOR]
[COLOR=#ff0000]group = 2[/COLOR]
[COLOR=#3E3E3E]emmcache = 1,1,2
[/COLOR][COLOR=#ff0000]caid = 09C4
ndsversion = 2[/COLOR]

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = OSEmu[/COLOR]
[COLOR=#ff0000]enable = 1[/COLOR]
[COLOR=#3E3E3E]protocol = camd35[/COLOR]
[COLOR=#3E3E3E]device = 127.0.0.1,54321[/COLOR]
[COLOR=#3E3E3E]user = emu[/COLOR]
[COLOR=#3E3E3E]password = emu[/COLOR]
[COLOR=#3E3E3E]caid = 0D00,0D02,0D03,0D05,090F[/COLOR]
[COLOR=#3E3E3E]ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D 05:9C;090F:62,73,84,94,95,96,99,A6,B7[/COLOR]
[COLOR=#3E3E3E]ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:0 00004,000008,000024,000028;0D05:000004,000010;090F :000000[/COLOR]
[COLOR=#3E3E3E]group = 1[/COLOR]

zu oscam.user

Code:

[COLOR=#3E3E3E][account][/COLOR]
[COLOR=#3E3E3E]user = USER[/COLOR]
[COLOR=#3E3E3E]pwd = PASS[/COLOR]
[COLOR=#3E3E3E]uniq = 1[/COLOR]
[COLOR=#3E3E3E]group = 1,2[/COLOR]
[COLOR=#3E3E3E]au = sky_v13[/COLOR]

hostname und caid kann hier raus, caid wird im reader definiert
group zu den readern anpassen, du hast zwei, die v13 und den OSemu, ich bevorzuge immer seperate groups bei readern, kannst aber auch alle in einer lassen
bei AU den label namen des Readers einfügen damit deine karte updates bekommt, das sollte auch ein Linux reci machen und auch nur 1er, das reicht

Wuati · 20. März 2014

AW: IPC installiert, was nun?

Erstmal DANKE an dodo83 - hab jetzt mal alles umgeschrieben...
Bekomme jetzt im IPC WEB folgenden log:

2014/03/20 10:41:22 A58C00 r sky_v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/03/20 10:41:23 A58C00 r sky_v13 [mouse] Card type: P1AV
2014/03/20 10:41:23 A58C00 r sky_v13 [mouse] Rom version: 10A7
2014/03/20 10:41:23 A58C00 r sky_v13 [mouse] Unable to get smartcard credit
2014/03/20 10:41:23 A58C00 r sky_v13 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/03/20 10:41:23 A58C00 r sky_v13 [mouse] found card system videoguard2
2014/03/20 10:41:23 A58C00 r sky_v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/03/20 10:41:23 A58C00 r sky_v13 [videoguard2] card detected
2014/03/20 10:41:23 A58C00 r sky_v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/03/20 10:41:25 A58C00 r sky_v13 [mouse] ATR: 3F FF 15 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 15
2014/03/20 10:41:25 A58C00 r sky_v13 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=3
2014/03/20 10:41:25 A58C00 r sky_v13 [mouse] Setting baudrate to 153600 bps
2014/03/20 10:41:25 A58C00 r sky_v13 [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2014/03/20 10:41:25 A58C00 r sky_v13 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] Card type: P1AV
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] Rom version: 10A7
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] Unable to get smartcard credit
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] Region Code: 00BO0101
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] Pincode read: 1701
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] PCB settings: FF FF FF FF
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] ready for requests
2014/03/20 10:41:26 A58C00 r sky_v13 [mouse] found card system videoguard2
2014/03/20 10:41:26 A58C00 r sky_v13 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/03/20 10:41:26 A58C00 r sky_v13 [videoguard2] card detected
2014/03/20 10:41:26 A58C00 r sky_v13 [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
2014/03/20 10:41:26 A58C00 r sky_v13 [videoguard2] tier: 138a, expiry date: 2009/12/01-00:01:48
2014/03/20 10:41:26 A58C00 r sky_v13 [videoguard2] tier: 64bb, expiry date: 2009/03/31-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 007b, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 008e, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 00be, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 00c0, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 00c7, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 00c8, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 00c9, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 00f3, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:27 A58C00 r sky_v13 [videoguard2] tier: 00fa, expiry date: 2014/04/01-01:01:00
2014/03/20 10:41:31 0 s init for all local cards done
2014/03/20 10:41:31 0 s anti cascading disabled
2014/03/20 10:46:05 A5A900 h all debug_level=65535
2014/03/20 10:46:06 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:06 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:06 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:07 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:07 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:08 0 --- Skipped 1 duplicated log lines ---
2014/03/20 10:46:08 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:08 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:09 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:09 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:09 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:09 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:10 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:10 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:10 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:10 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:11 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:11 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:11 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:11 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:12 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:12 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:13 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:13 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:14 0 --- Skipped 1 duplicated log lines ---
2014/03/20 10:46:14 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:14 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:15 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:15 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:15 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:15 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:16 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:16 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:16 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:16 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:17 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:17 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:17 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:17 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:18 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:18 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:19 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:19 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:19 0 --- Skipped 1 duplicated log lines ---
2014/03/20 10:46:19 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:20 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:20 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:20 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:21 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:21 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:21 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:21 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:22 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:22 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:22 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:22 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:23 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:23 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:24 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:24 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:25 0 --- Skipped 1 duplicated log lines ---
2014/03/20 10:46:25 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:25 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:26 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:26 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:26 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:26 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:27 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:27 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:27 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:27 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:28 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:28 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:28 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:28 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:29 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:29 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:30 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:30 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:30 0 --- Skipped 1 duplicated log lines ---
2014/03/20 10:46:30 0 start reader thread action 1
2014/03/20 10:46:30 A62708 p data from add_job action=1 client p OSEmu
2014/03/20 10:46:30 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:31 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:31 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:31 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:32 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:32 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:32 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:32 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:33 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:33 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:33 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:33 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:34 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:34 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:35 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:35 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:36 0 --- Skipped 1 duplicated log lines ---
2014/03/20 10:46:36 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:36 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:37 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:37 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:37 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:37 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:38 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:38 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:38 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:38 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed
2014/03/20 10:46:39 0 --- Skipped 2 duplicated log lines ---
2014/03/20 10:46:39 A58C00 r sky_v13 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2014/03/20 10:46:39 A5A900 h WebIf: Received no auth header from 192.168.1.131.
2014/03/20 10:46:39 A5A900 h WebIf: Origin checked. Result: access from 192.168.1.131 => allowed

Peinliche Frage: Läuft mein Server? Wo sehe ich ob alles stabil ist?
Ein paar Fehlermeldungen sind ja im Log... Danke für die Tipps...

So long

PS: Grad eben hat mich jemand angeschrieben, der auch total hängt...
Denke den Post könnte man dann als Anleitung für TOTALE NOOBS irgendwo setzen... ;-)

dodo83 · 20. März 2014

AW: IPC installiert, was nun?

zum log
im WebIF ganz unten, steht: Switch Debug from 0 to 0 1 2 3 4 ...
drück mal da auf die 0
somit wird sowas im log nicht angezeigt, nur das dann was du auch benötigst

sonst, Karte wird erkannt, das erkennst du auch an dem was im WebIF steht beim Reader, wenn CARDOK ( X entitlements ) erscheint dann ist alles paletti
jetzt solltest du einen Client einbinden der dann was abfragen müsste

Wuati · 20. März 2014

AW: IPC installiert, was nun?

vielen Dank dodo83 - mach mich dann später an den Client...
Just for info: (für andere User) Ich find den CARDOK Eintrag unter Statur ganz oben...

So long

Wuati · 20. März 2014

AW: IPC installiert, was nun?

So Leute mein HS läuft... Vielen Dank an das Board - vor allem an Dodo83!
Bin voll happy! Natürlich muss ich jetzt noch einige Sachen erweitern.
(2 Card (HD+) + das ganze extern zur Verfügung stellen (2 Wohnsitz) + Neustart PI (automatisch) + sonstiges)

Freu mich auf all das neue hier im Board!

So long

Wuati · 22. März 2014

AW: IPC installiert, was nun?

kurzer Zwischenbericht... Läuft nun auch vom 2. Wohnsitz ohne Probleme!
einfach die externe Ip eintragen und den Router einstellen (Port forwarting)

Neustart funktioniert auch (watchdog)

So long

Wuati · 24. März 2014

AW: IPC installiert, was nun?

So Leute... Nun versuche ich mich mal bei Hd+!
Hab eine weiße Hd01 Karte

Meine Config:

Oscam.server

# oscam.server generated automatically by Streamboard OSCAM 1.10rc-svn build #6089# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = sky_v13
protocol = mouse
device = /dev/ttyUSB0
boxid = 12345678
ins7e11 = 15
detect = cd
group = 2
emmcache = 1,1,2
caid = 09C4
ndsversion = 2

[reader]
label = OSEmu
enable = 1
protocol = camd35
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D 05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:0 00004,000008,000024,000028;0D05:000004,000010;090F :000000
group = 1

[reader]
Label = HDplus
Protocol = mouse
device = /dev/ttyUSB1
cardmhz = 357
Detect = CD
Group = 3
CAID = 1830
rsakey = BF3...D5 #Für den RSA und Boxkey hilft Google
boxkey = A7....7C #Für den RSA und Boxkey hilft Google
EMMCache = 1,1,2

Oscam.user

[account]user = XXXX
pwd = XXXX
uniq = 1
group = 1,2,3
au = sky_v13, HDplus

CAID der HD+ hab ich im WEB bei Reader eingetragen...
In der 40-usbadapter.rules hab ich die Serial bzw. eine 2 Zeile für die zweiten Mouse eingetragen...

Ich glaub jetzt fehlen mir "nur" noch die beiden rsakey und boxkey?
Kommt man um den Config Creator vorbei? Hab leider nur MAC ohne WIN SIM hier.
Habt ihr einen Tipp bzw. stimmt der Rest?

Wie immer vielen Dank!

So long

dodo83 · 24. März 2014

AW: IPC installiert, was nun?

Sie müssen registriert sein, um Links zu sehen.

erstes Ergebnis, einfach rein und kopieren :emoticon-0105-wink:

die easymouse ist auch richtig eingestellt?

Derek Buegel · 24. März 2014

AW: IPC installiert, was nun?

au = sky_v13, HDplus

Vor HDplus das Leerzeichen weg!

MfG

Wuati · 24. März 2014

AW: IPC installiert, was nun?

100:0 für dich... Dachte das ist alles wiederum leicht kompliziert...:emoticon-0131-angel
Oft ist doch der einfachste Weg der direkte...

Was sagst zu den Dateien? Alles bene? ;-)
Die Mouse wird "gejagt" auf:

5V, Smartmouse, 3,579Mhz, Y5

THX - für dein Feedback (und ja den Post nennen ich nach Abschluss in: Dodo83 rockt das Board um)

- - - - - - - - - -

Derek Buegel schrieb:
Vor HDplus das Leerzeichen weg!

MfG

Da is keines - aber danke für den Hinweis... ;-)

dodo83 · 25. März 2014

AW: IPC installiert, was nun?

morgen,
die configs sehen soweit gut aus, du könntest dir noch services anlegen, zumindest für die HDplus Sender denn diese kann man ja auch auf die V13 buchen, deswegen werden die bestimmt auch von der mit abgefragt und nicht beantwortet werden können
diese müssen dann natürlich auch aktuell gehalten werden, wenn zb. neue sender aufgeschaltet werden oder sich die SID´s ändern
das einfachste wär für Dich und ausreichend meine ich:
oscam.services

Code:

[hdplus]
caid                          = 1830,1843
srvid                         = 277E,EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,2E9B,151A,157F,157C,1581

[hdplusNDS]
caid                          = 09C4,098C
srvid                         = 277E,EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,5273,5274,1519,2E9B,151A,157F,157C,1581

oscam.server

Code:

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = sky_v13[/COLOR]
[COLOR=#3E3E3E]protocol = mouse[/COLOR]
[COLOR=#3E3E3E]device = /dev/ttyUSB0[/COLOR]
[COLOR=#3E3E3E]boxid = 12345678[/COLOR]
[COLOR=#3E3E3E]ins7e11 = 15[/COLOR]
[COLOR=#3E3E3E]detect = cd
[/COLOR]services = !hdplusNDS
[COLOR=#3E3E3E]group = 2[/COLOR]
[COLOR=#3E3E3E]emmcache = 1,1,2[/COLOR]
[COLOR=#3E3E3E]caid = 09C4[/COLOR]
[COLOR=#3E3E3E]ndsversion = 2[/COLOR]

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]label = OSEmu[/COLOR]
[COLOR=#3E3E3E]enable = 1[/COLOR]
[COLOR=#3E3E3E]protocol = camd35[/COLOR]
[COLOR=#3E3E3E]device = 127.0.0.1,54321[/COLOR]
[COLOR=#3E3E3E]user = emu[/COLOR]
[COLOR=#3E3E3E]password = emu[/COLOR]
[COLOR=#3E3E3E]caid = 0D00,0D02,0D03,0D05,090F[/COLOR]
[COLOR=#3E3E3E]ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D 05:9C;090F:62,73,84,94,95,96,99,A6,B7[/COLOR]
[COLOR=#3E3E3E]ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:0 00004,000008,000024,000028;0D05:000004,000010;090F :000000[/COLOR]
[COLOR=#3E3E3E]group = 1[/COLOR]

[COLOR=#3E3E3E][reader][/COLOR]
[COLOR=#3E3E3E]Label = HDplus[/COLOR]
[COLOR=#3E3E3E]Protocol = mouse[/COLOR]
[COLOR=#3E3E3E]device = /dev/ttyUSB1[/COLOR]
[COLOR=#3E3E3E]cardmhz = 357[/COLOR]
[COLOR=#3E3E3E]Detect = CD[/COLOR]
[COLOR=#3E3E3E]Group = 3
[/COLOR]services = hdplus
[COLOR=#3E3E3E]CAID = 1830[/COLOR]
[COLOR=#3E3E3E]rsakey = BF3...D5 #Für den RSA und Boxkey hilft Google[/COLOR]
[COLOR=#3E3E3E]boxkey = A7....7C #Für den RSA und Boxkey hilft Google[/COLOR]
[COLOR=#3E3E3E]EMMCache = 1,1,2[/COLOR]

oder

noch einfacher, auf dem Client eine cccam.prio datei erstellen

Code:

P:1830
P:09C4

somit wird die caid der HDplus Karte vor der caid der V13 abgefragt, verbessert die umschaltzeit und verhindert eine falschanfrage an der V13

Wuati · 25. März 2014

AW: IPC installiert, was nun?

Hey Dodo83 (aka Noob Helfer) ;-)

Hab ich das richtig verstanden:
Ich erstell die cccam.prio - kopier sie auf den Client in den ect Ordner und das war es?

Oder muss ich die Oscam.services auf jedenfalls am CS zu den anderen 3 Dateien kopieren...?
Ist meine Maus richtig eingestellt?

Wünsche eine erfolgreiche Woche!

So long...

dodo83 · 25. März 2014

AW: IPC installiert, was nun?

Mach es erstmal nur mit der prio, die muss in den pfad wo die cccam.cfg ist, sollte dan /etc sein
Beobachte dann am server ob falschanfragen kommen, wenn nicht dann kannst du es ohne services lassen

Ps.
Wenn die Hdplus karte erkannt wird dann sollte auch die maus richtig eingestellt sein ;-)

Gesendet von meinem GT-I9105P

Wuati · 26. März 2014

AW: IPC installiert, was nun?

Hy Leute!

Kleiner Rückschlag:

Hab heute die V14 Karte von Sky bekommen und gedacht ich kann diese einfach gegen die V13 tauschen...
Leider ist das nicht der Fall... Ich bekomme nun ständig eine Fehlermeldung...

2014/03/26 19:07:46 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9572 (arm-linux-gnueabihf)
2014/03/26 19:07:46 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2234
2014/03/26 19:07:46 0 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2014/03/26 19:07:46 0 s signal handling initialized
2014/03/26 19:07:46 0 s cccam: initialized (fd=5, port=22000, ip=192.168.1.67)
2014/03/26 19:07:46 0 s V14 [mouse] creating thread for device /dev/ttyUSB0
2014/03/26 19:07:46 0 s OSEmu [cs357x] creating thread for device 127.0.0.1
2014/03/26 19:07:46 0 s HDplus [mouse] creating thread for device /dev/ttyUSB0
2014/03/26 19:07:46 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/03/26 19:07:46 0 s waiting for local card init
2014/03/26 19:07:46 C28900 p cs357x proxy 127.0.0.1:54321
2014/03/26 19:07:46 C28900 p OSEmu [cs357x] proxy initialized, server 127.0.0.1:54321
2014/03/26 19:07:46 C35EB8 h webif: decompressed 137575 bytes back into 349400 bytes
2014/03/26 19:07:47 C35EB8 h HTTP Server running. ip=192.168.1.67 port=16002
2014/03/26 19:07:47 C26C00 r V14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2014/03/26 19:07:47 C39538 r HDplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/03/26 19:07:48 0 s init for all local cards done
2014/03/26 19:07:48 0 s anti cascading disabled
2014/03/26 19:07:51 C49BE0 c encrypted cccam-client 192.168.1.66 granted (MARIOSZ, au=on (1 reader))
2014/03/26 19:07:55 C49BE0 c MARIOSZ (098C&000000/025A/0082/98B11B36FDC93E72AB788BE5DE3AD84D2): rejected group (1 ms) (no matching reader)
2014/03/26 19:08:03 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:9B8D41614A596A2AA4CEC5DEDA71434C): rejected group (0 ms) (no matching reader)
2014/03/26 19:08:10 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:C6469B6321D375F9D23C11F19D27184A): rejected group (0 ms) (no matching reader)
2014/03/26 19:08:17 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:CC34AD7005852EA90547157A53BA798A): rejected group (0 ms) (no matching reader)
2014/03/26 19:08:24 C49BE0 c MARIOSZ (098C&000000/025A/0082/988471B1952312672CBBCC63ADA9AA4FF): rejected group (0 ms) (no matching reader)
2014/03/26 19:08:31 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:F592DFF75A27716E763F25E0FF46DFCC): rejected group (0 ms) (no matching reader)
2014/03/26 19:08:39 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:753BA84DCE7C844999E8177A820295E2): rejected group (0 ms) (no matching reader)
2014/03/26 19:08:46 C49BE0 c MARIOSZ (098C&000000/025A/0082/983C22599AA53D00EA50EF561F9700056): rejected group (1 ms) (no matching reader)
2014/03/26 19:08:53 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:8E77BD7D9CFBC777C847A6FF9031D218): rejected group (0 ms) (no matching reader)
2014/03/26 19:09:00 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:F0A9468E8071EB2419EB9E906E2AAB93): rejected group (0 ms) (no matching reader)
2014/03/26 19:09:08 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:656E53C57EFC8642F3F3BB7326A79070): rejected group (1 ms) (no matching reader)
2014/03/26 19:09:17 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:049E16F7B925AFDB4EB51C098BC0C27A): rejected group (0 ms) (no matching reader)
2014/03/26 19:09:24 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:EF2CBCA04EE48013841957E59C811CFD): rejected group (0 ms) (no matching reader)
2014/03/26 19:09:31 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:150FC8D2D1AC225E348D0386EDAF7530): rejected group (1 ms) (no matching reader)
2014/03/26 19:09:38 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:07C7A15E026B5C737BE3014079E5BA5B): rejected group (1 ms) (no matching reader)
2014/03/26 19:09:46 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:EA7A29214F00B96A1FB18793322B9563): rejected group (0 ms) (no matching reader)
2014/03/26 19:09:53 C49BE0 c MARIOSZ (098C&000000/025A/0082/98:A2521AC300E9E434A81EA2223F88C71C): rejected group (1 ms) (no matching reader)

Hab hier im Board gelesen und bin zu folgender server.oscam leider ohne Erfolg gekommen:

[reader]label = V14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 358
cardmhz = 358
group = 2
emmcache = 1,1,2
ecmwhitelist = 098C:98

Danke für eure Hilfe!

LG

bombadil · 26. März 2014

AW: IPC installiert, was nun?

Moin,

du hast die Karten in den Readern vertauscht.

Grüße
Bombadil

IPC installiert, was nun?

dodo83

Wuati

Newbie

dodo83

Wuati

Newbie

Wuati

Newbie

Wuati

Newbie

Wuati

Newbie

dodo83

Derek Buegel

Wuati

Newbie

dodo83

Wuati

Newbie

dodo83

Wuati

Newbie

bombadil

Ähnliche Themen

IPC installiert, was nun?

Newbie

Newbie

Newbie

Newbie

Newbie

Newbie

Newbie

Newbie

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz