Internetseite von Spark(Mitglied von Fullan)

[Pilot]

Hab hier eine Seite gefunden: Spark Media:
Link veralten (gelöscht)

Da gibts Hinweise zu Spark als Firmware. Hinweise zu Hardware, Downloadmöglichkeiten mit Hinweisen in englisch, wie man seinen Receiver herausfindet über die Produkt ID: Menü, Grundeinstellung, Systeminformation; ganz oben STBID.

Weiterhin sind 2 Receiver angezeigt.1. Spark 1 Basic,. Das sind wahrscheinlich: pingulux, pingulux plus, golden media 990-reloaded und amiko alien 8900. 2. spark 1 uni. Das sind wahrscheinlich die zu erwartenden Receiver mit 3 Tunern.
Dazu gibts die technischen Hinweise:

Spoiler

Features
[TABLE="align: left"]
[TR]
[TD] Features[/TD]
[TD]

Linux OS​

[/TD]
[/TR]
[TR]
[TD]

2 DVBS2 + 1 DVBT/C compliant​

[/TD]
[/TR]
[TR]
[TD]

Video Decoding; MPEG-4/H.264, MP@ML, MP@HL, MP@4.1, HP@L4.1,XVID,DIVX​

[/TD]
[/TR]
[TR]
[TD]

Video resolution 1080P 1080i,720P,576,480​

[/TD]
[/TR]
[TR]
[TD]

Channel list editing​

[/TD]
[/TR]
[TR]
[TD]

Favorite channel list editing​

[/TD]
[/TR]
[TR]
[TD]

True-color On-Screen Display (OSD)​

[/TD]
[/TR]
[TR]
[TD]

Full Picture In Graphic (PIG) function​

[/TD]
[/TR]
[TR]
[TD]

Electronic program Guide(EPG)for on screen channel information​

[/TD]
[/TR]
[TR]
[TD]

2Xcard Reader with CONAX CAS7 embedded​

[/TD]
[/TR]
[TR]
[TD]

HDMI HD Video/Audio Output​

[/TD]
[/TR]
[TR]
[TD]

Audio Decoding ；WMA-9,WMA-9 pro, MEPG 1 2, MP3 MPEG-4 AAC, AAC+, DD, DD+​

[/TD]
[/TR]
[TR]
[TD]

Audio Coaxial interface for Dolby bit stream out​

[/TD]
[/TR]
[TR]
[TD]

S/PDIF interface and Coaxial for Dolby bit stream out​

[/TD]
[/TR]
[TR]
[TD] TV SCART：CVBS / RGB output PAL, NTSC[/TD]
[/TR]
[TR]
[TD]

Software upgrade via spark online (network), or USB 2.0​

[/TD]
[/TR]
[TR]
[TD]

PVR function support, USB2.0 highspeed, recording and time shift​

[/TD]
[/TR]
[TR]
[TD]

Diseqc 1.0,1.1,1.2 and 1.3usals​

[/TD]
[/TR]
[/TABLE]

Patent and Certificate​

[TABLE="align: left"]
[TR]
[TD] Patent[/TD]
[TD]

DOLBY Bild ist nicht mehr aktiv.​

[/TD]
[/TR]
[TR]
[TD]

MP3 Bild ist nicht mehr aktiv.​

[/TD]
[/TR]
[TR]
[TD]

CONAX Bild ist nicht mehr aktiv.​

[/TD]
[/TR]
[TR]
[TD]

HDMI Bild ist nicht mehr aktiv.​

[/TD]
[/TR]
[TR]
[TD]

Xvid Bild ist nicht mehr aktiv.​

[/TD]
[/TR]
[TR]
[TD] Certificate[/TD]
[TD]

WEEE garbage bin Bild ist nicht mehr aktiv.​

[/TD]
[/TR]
[TR]
[TD]

CE Bild ist nicht mehr aktiv.​

[/TD]
[/TR]
[TR]
[TD]

RoHS Bild ist nicht mehr aktiv.​

[/TD]
[/TR]
[/TABLE]

General Specifications​

[TABLE="align: left"]
[TR]
[TD]

Main Processor​

[/TD]
[TD]

540MHz based CPU​

[/TD]
[/TR]
[TR]
[TD]

Flash Memory​

[/TD]
[TD]

Nor flash: 2MB X 1 ; Nand flash:512MB X 1​

[/TD]
[/TR]
[TR]
[TD]

RAM​

[/TD]
[TD]

DDR2 128MB x 2DDRII 800 32bit with capability of 256MBytes​

[/TD]
[/TR]
[TR]
[TD]

Tuner Type​

[/TD]
[TD]

SHARP BS2S7VZ7306A+M3501B​

[/TD]
[/TR]
[TR]
[TD] DVB-S2 Type[/TD]
[TD] SHARP BS2S7VZ7306A[/TD]
[/TR]
[TR]
[TD] DVB-S2 Satellite Receiver Standard[/TD]
[TD] ETSI EN 302 307[/TD]
[/TR]
[TR]
[TD] DVB-S2 Input Frequency Range[/TD]
[TD] 950MHz ~ 2150MHz[/TD]
[/TR]
[TR]
[TD] DVB-S2 Input impedance[/TD]
[TD] 75 [Ω][/TD]
[/TR]
[TR]
[TD] DVB-S2 Constellation[/TD]
[TD] QPSK / 8PSK/ 16APSK[/TD]
[/TR]
[TR]
[TD] DVB-S2 Forward Error Correction (FEC)[/TD]
[TD] QPSK: 1/2,2/3,3/5,3/4,4/5,5/6,6/7,7/8,8/9,8/10[/TD]
[/TR]
[TR]
[TD] 8PSK: 3/5,2/3,3/4,5/6,8/9,9/10[/TD]
[/TR]
[TR]
[TD] 16APSK: 2/3,3/4,4/5,5/6,8/9,9/10[/TD]
[/TR]
[TR]
[TD] DVB-S2 Symbol rate[/TD]
[TD] DVB-S2: 2M ~ 45M[/TD]
[/TR]
[TR]
[TD] DVB-S: 2M ~ 45M[/TD]
[/TR]
[TR]
[TD] DVB-S2 LNB (Low Noise Block) power supply[/TD]
[TD] Vertical: + 13.5 V; Horizontal: + 18 V[/TD]
[/TR]
[TR]
[TD] DVB-S2 Digital Satellite Equipment Control (DISEqC)[/TD]
[TD] DiseqC 1.0,1.1,1.2, 1.3 USALS Available[/TD]
[/TR]
[TR]
[TD] DVB-S2 Frequency[/TD]
[TD] 22 kHz ± 4 kHz; Amplitude:0.6 V ± 0.2V[/TD]
[/TR]
[TR]
[TD] DVB-S2 Sensitivity[/TD]
[TD] Between –25 and -65 dBm[/TD]
[/TR]
[TR]
[TD] DVB-T/C Type[/TD]
[TD] SHARP VA1H1ED54695469[/TD]
[/TR]
[TR]
[TD] DVB-T/C Terrestrial Receiver Standard[/TD]
[TD] ETSI 300 744 compliant[/TD]
[/TR]
[TR]
[TD] DVB-T/C Input Frequency Range[/TD]
[TD] VHFL:51~142.5MHz
VHF H:149.5~426 MHz
UHF:434~858 MHz[/TD]
[/TR]
[TR]
[TD] DVB-T/C RF Loop Through in Standby Mode[/TD]
[TD] [Optional][/TD]
[/TR]
[TR]
[TD] DVB-T/C Signal Level[/TD]
[TD] Nordig Compliant
DBOOK Compliant[/TD]
[/TR]
[TR]
[TD] DVB-T/C Constellation[/TD]
[TD] QPSK / 16QAM / 64QAM[/TD]
[/TR]
[TR]
[TD] DVB-T/C Forward Error Correction (FEC)[/TD]
[TD] 1/2, 2/3, 3/4,5/6,7/8[/TD]
[/TR]
[TR]
[TD] DVB-T/C Guard Interval[/TD]
[TD] 1/4, 1/8, 1/16, 1/32[/TD]
[/TR]
[TR]
[TD] DVB-T/C FFT Mode[/TD]
[TD] 2K / 8K[/TD]
[/TR]
[TR]
[TD] DVB-T/C Channel Bandwidth[/TD]
[TD] 6 / 7/ 8 MHz[/TD]
[/TR]
[TR]
[TD] Video Decoder[/TD]
[TD] MPEG-1, MPEG-2, MPEG-4, VC-1, FLV-1,WMV, H264, H263, Divx, Xvid.[/TD]
[/TR]
[TR]
[TD] Video Resolution[/TD]
[TD] 480 , 576 , 720p, 1080i, 1080p[/TD]
[/TR]
[TR]
[TD] Output Standard[/TD]
[TD] AUTO/PAL/NTSC[/TD]
[/TR]
[TR]
[TD] Aspect Ratio[/TD]
[TD] 16:9, 4:3. conversion: pan scan, letter box, combined[/TD]
[/TR]
[TR]
[TD] Audio Decoder[/TD]
[TD] WMA-9,WMA-9 pro, MEPG 1 2, MP3 MPEG-4 AAC, AAC+, DD, DD+[/TD]
[/TR]
[TR]
[TD] RCA output[/TD]
[TD] 1-CVBS
1- Audio L
1- Audio R
1-Coaxial for digital audio output (Output Format: PCM，DD)[/TD]
[/TR]
[TR]
[TD] SCART[/TD]
[TD] TV SCART: CVBS / RGB output (include audio analog output, of course) 480, 576[/TD]
[/TR]
[TR]
[TD] SPDIF[/TD]
[TD] Output Format: PCM，DD[/TD]
[/TR]
[TR]
[TD] Modem[/TD]
[TD] Yes, 1 Modem optional[/TD]
[/TR]
[TR]
[TD] Power switch[/TD]
[TD] ON/OFF[/TD]
[/TR]
[TR]
[TD] HDMI[/TD]
[TD] High Definition Media Interface V1.3[/TD]
[/TR]
[TR]
[TD] 480, 576, 720p,1080i ,1080p[/TD]
[/TR]
[TR]
[TD] RS232[/TD]
[TD] Transfer rate 115.2Kbps[/TD]
[/TR]
[TR]
[TD] 9 pinD-sub Type[/TD]
[/TR]
[TR]
[TD] USB [/TD]
[TD] Number: 2
Type: Host[/TD]
[/TR]
[TR]
[TD] Ethernet[/TD]
[TD] Type: 10M/100M Number: 1[/TD]
[/TR]
[TR]
[TD] Power supply unit type[/TD]
[TD] SMPS[/TD]
[/TR]
[TR]
[TD] Operating frequency of smps[/TD]
[TD] 65 [kHz][/TD]
[/TR]
[TR]
[TD] Input voltage and frequency range[/TD]
[TD] AC 100-240 V, 50/60 Hz[/TD]
[/TR]
[TR]
[TD] Compliance with EMC (Electromagnetic Compatibility) requirements[/TD]
[TD] Conformity with EN 55013,EN55020 and EN 61000-6-3-2/-3[/TD]
[/TR]
[TR]
[TD] Tolerance to noise (it may not disturb analog
television channels of level 60 dBmV in by-pass
operation mode)[/TD]
[TD] EN 60065[/TD]
[/TR]
[TR]
[TD] Support true stand by mode[/TD]
[TD] Power consumption <0.5W[/TD]
[/TR]
[TR]
[TD] Power consumption in normal working mode[/TD]
[TD] Power consumption <20W[/TD]
[/TR]
[TR]
[TD] Size[L*W*H][/TD]
[TD] 300mm *58mm*205mm[/TD]
[/TR]
[/TABLE]

​

Rear panel = Rückseite
​

	Number​		Number​
DVB-S2​	2​	RS232​	1​
Cable /Terrestrial	1	USB	1
Audio​ Digital(Coaxial)	1​	HDMI​	1​
S/PDIF​	1​	Ethernet​	1​
VIDEO OUT-CVBS​	1​	POWER​	1 ​
AUDIO OUT(L,R)​	1​	TV SCART​	1​
Modem	Optional

Front panel = Vorderseite(hinter der Abdeckung)
​

2X Smart card slot, 1X USB, Buttons(Menu,power,ch+/-,vol+/-,OK), VFD front display​

Mlg piloten