fidelcastro54
Spezialist
- Registriert
- 7. Mai 2009
- Beiträge
- 577
- Reaktionspunkte
- 63
- Punkte
- 88
Hi Leute! Ich wollte heute die v14 in Betrieb nehmen und die wird nicht hell. Hier das log:
und die configs!
Oscam.server
Oscam.config
oscam.user
und im Webif Status steht "NEEDINIT"
Könnt ihr mir weiterhelfen?
- 2015/02/28 10:35:35 0 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
- 2015/02/28 10:35:35 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
- 2015/02/28 10:35:35 0 s (main) signal handling initialized
- 2015/02/28 10:35:35 0 s (config) 555 service-id's loaded in 6 ms
- 2015/02/28 10:35:35 0 s (config) 85 tier-id's loaded
- 2015/02/28 10:35:35 0 s (config) 993 provid's loaded
- 2015/02/28 10:35:35 0 s (reader) HD+ [internal] creating thread for device /dev/sci0
- 2015/02/28 10:35:35 0 s (reader) v14 [internal] creating thread for device /dev/sci1
- 2015/02/28 10:35:35 0 s (reader) ORF,MTV [cs357x] creating thread for device 127.0.0.1
- 2015/02/28 10:35:35 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
- 2015/02/28 10:35:35 0 s (main) waiting for local card init
- 2015/02/28 10:35:35 5552F0 r (reader) HD+ [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
- 2015/02/28 10:35:35 5552F0 r (reader) HD+ [internal] Reader sci internal, detected box type: et8000
- 2015/02/28 10:35:35 5558A8 r (reader) v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz)
- 2015/02/28 10:35:35 5558A8 r (reader) v14 [internal] Reader sci internal, detected box type: et8000
- 2015/02/28 10:35:35 555DE0 p (reader) ORF,MTV [cs357x] proxy 127.0.0.1:12345
- 2015/02/28 10:35:35 555DE0 p (reader) ORF,MTV [cs357x] proxy initialized, server 127.0.0.1:12345
- 2015/02/28 10:35:35 5552F0 r (reader) HD+ [internal] card detected
- 2015/02/28 10:35:35 5558A8 r (reader) v14 [internal] card detected
- 2015/02/28 10:35:35 76F00468 h (webif) webif: decompressed 152892 bytes back into 367552 bytes
- 2015/02/28 10:35:35 76F00468 h (webif) HTTP Server running. ip=0.0.0.0 port=8081
- 2015/02/28 10:35:36 5558A8 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2015/02/28 10:35:36 5558A8 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2015/02/28 10:35:36 5558A8 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
- 2015/02/28 10:35:36 5558A8 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75133
- 2015/02/28 10:35:36 5552F0 r (reader) HD+ [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
- 2015/02/28 10:35:36 5552F0 r (reader) HD+ [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
- 2015/02/28 10:35:36 5552F0 r (reader) HD+ [internal] Calculated work ETU is 5.93 us reader mhz = 540
- 2015/02/28 10:35:36 5558A8 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [internal] Card type: P1TV
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [internal] Rom version: 20AA
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [internal] Credit available on card: 0 euro
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [internal] Extended 4C detected
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [internal] found card system videoguard2
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:35:37 5558A8 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
- 2015/02/28 10:35:38 5558A8 r (reader) v14 [videoguard2] Deactivating card
- 2015/02/28 10:35:39 5558A8 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
- 2015/02/28 10:35:39 76D087C0 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
- 2015/02/28 10:35:39 76D087C0 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et8000
- 2015/02/28 10:35:39 76D087C0 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:35:42 5552F0 r (reader) HD+ [internal] Buffers readed 0 bytes total time_us 5999259
- 2015/02/28 10:35:42 5552F0 r (reader) HD+ [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->mhz)
- 2015/02/28 10:35:42 5552F0 r (reader) HD+ [internal] Card responded ok for ifsd request of 160
- 2015/02/28 10:35:43 5552F0 r (reader) HD+ [internal] detect native nagra card
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [internal] ready for requests
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [internal] found card system nagra
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] ROM: D N A S P 1 8 0
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] REV: M e r 0 0 0
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] SER: ############
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] CAID: 1843
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] Prv.ID: 00 00 34 11 (sysid)
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] Prv.ID: 00 00 00 00
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] IRD ID: ############
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] active to: 2015/05/01 02:33
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] -----------------------------------------
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] |id |tier |valid from |valid to |
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] +----+--------+------------+------------+
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] |8011|0066 |2011/05/23 |2012/05/23 |
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] |8011|0BEA |2014/06/19 |2015/07/25 |
- 2015/02/28 10:35:45 5552F0 r (reader) HD+ [nagra] -----------------------------------------
- 2015/02/28 10:35:48 76D087C0 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2015/02/28 10:35:48 76D087C0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2015/02/28 10:35:48 76D087C0 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
- 2015/02/28 10:35:48 76D087C0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75133
- 2015/02/28 10:35:48 76D087C0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [internal] Card type: P1TV
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [internal] Rom version: 20AA
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [internal] Credit available on card: 0 euro
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [internal] Extended 4C detected
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [internal] found card system videoguard2
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:35:50 76D087C0 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
- 2015/02/28 10:35:50 0 s (main) init for all local cards done
- 2015/02/28 10:35:50 0 s (emmcache) loaded 73 emmcache records from /etc/tuxbox/config/oscam/oscam.emmcache in 2 ms
- 2015/02/28 10:35:50 0 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam/oscam.emmstat in 0 ms
- 2015/02/28 10:35:50 0 s (anticasc) anti cascading disabled
- 2015/02/28 10:35:50 58B980 c (client) plain dvbapi-client granted (dvbapiau, au=auto (3 reader))
- 2015/02/28 10:35:50 58B980 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam/oscam.ccache
- 2015/02/28 10:35:50 58B980 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
- 2015/02/28 10:35:50 58B980 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
- 2015/02/28 10:35:50 58B980 c (dvbapi) PMT6 CA PMT Server connected on fd 15!
- 2015/02/28 10:35:50 58B980 c (dvbapi) Demuxer #0 added new ecmpid #0 CAID: 1833 ECM_PID: 180F PROVID: 000000
- 2015/02/28 10:35:50 58B980 c (dvbapi) Demuxer #0 added new ecmpid #1 CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
- 2015/02/28 10:35:50 58B980 c (dvbapi) Demuxer #0 added new ecmpid #2 CAID: 09AF ECM_PID: 1F0F PROVID: 000000
- 2015/02/28 10:35:50 58B980 c (dvbapi) Demuxer #0 added new ecmpid #3 CAID: 098C ECM_PID: 1A0F PROVID: 000000
- 2015/02/28 10:35:50 58B980 c (dvbapi) Demuxer #0 found 4 ECMpids and 2 STREAMpids in PMT
- 2015/02/28 10:35:50 58B980 c (dvbapi) Demuxer #0 receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
- 2015/02/28 10:35:50 58B980 c (dvbapi) Demuxer #0 new program number: 006C (Sky Sport News HD) [pmt_list_management 3]
- 2015/02/28 10:35:50 58B980 c (dvbapi) Demuxer #0 no suitable readers found that can be used for decoding!
- 2015/02/28 10:35:51 76D087C0 r (reader) v14 [videoguard2] Deactivating card
- 2015/02/28 10:35:51 76D087C0 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
- 2015/02/28 10:35:51 76F04A28 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
- 2015/02/28 10:35:51 76F04A28 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et8000
- 2015/02/28 10:35:51 76F04A28 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:35:53 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:35:56 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:35:59 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:00 76F04A28 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2015/02/28 10:36:00 76F04A28 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2015/02/28 10:36:00 76F04A28 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
- 2015/02/28 10:36:00 76F04A28 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75131
- 2015/02/28 10:36:00 76F04A28 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [internal] Card type: P1TV
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [internal] Rom version: 20AA
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [internal] Credit available on card: 0 euro
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [internal] Extended 4C detected
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [internal] found card system videoguard2
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:02 76F04A28 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
- 2015/02/28 10:36:02 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:03 76F04A28 r (reader) v14 [videoguard2] Deactivating card
- 2015/02/28 10:36:03 76F04A28 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
- 2015/02/28 10:36:03 76F04F80 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
- 2015/02/28 10:36:03 76F04F80 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et8000
- 2015/02/28 10:36:03 76F04F80 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:05 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:08 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:11 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:12 76F04F80 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2015/02/28 10:36:12 76F04F80 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2015/02/28 10:36:12 76F04F80 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
- 2015/02/28 10:36:12 76F04F80 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75129
- 2015/02/28 10:36:12 76F04F80 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [internal] Card type: P1TV
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [internal] Rom version: 20AA
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [internal] Credit available on card: 0 euro
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [internal] Extended 4C detected
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [internal] found card system videoguard2
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:14 76F04F80 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
- 2015/02/28 10:36:14 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:15 76F04F80 r (reader) v14 [videoguard2] Deactivating card
- 2015/02/28 10:36:15 76F04F80 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
- 2015/02/28 10:36:15 76F046F8 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
- 2015/02/28 10:36:15 76F046F8 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et8000
- 2015/02/28 10:36:15 76F046F8 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:17 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:20 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:23 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:24 76F046F8 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2015/02/28 10:36:24 76F046F8 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2015/02/28 10:36:24 76F046F8 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
- 2015/02/28 10:36:24 76F046F8 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75153
- 2015/02/28 10:36:24 76F046F8 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [internal] Card type: P1TV
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [internal] Rom version: 20AA
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [internal] Credit available on card: 0 euro
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [internal] Extended 4C detected
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [internal] found card system videoguard2
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:26 76F046F8 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
- 2015/02/28 10:36:26 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:27 76F046F8 r (reader) v14 [videoguard2] Deactivating card
- 2015/02/28 10:36:27 76F046F8 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
- 2015/02/28 10:36:27 76F04DE8 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
- 2015/02/28 10:36:27 76F04DE8 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et8000
- 2015/02/28 10:36:27 76F04DE8 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:29 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:32 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:35 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:36 76F04DE8 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2015/02/28 10:36:36 76F04DE8 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2015/02/28 10:36:36 76F04DE8 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
- 2015/02/28 10:36:36 76F04DE8 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75134
- 2015/02/28 10:36:36 76F04DE8 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [internal] Card type: P1TV
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [internal] Rom version: 20AA
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [internal] Credit available on card: 0 euro
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [internal] Extended 4C detected
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [internal] found card system videoguard2
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:38 76F04DE8 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
- 2015/02/28 10:36:38 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:39 76F04DE8 r (reader) v14 [videoguard2] Deactivating card
- 2015/02/28 10:36:39 76F04DE8 r (reader) v14 [videoguard2] creating thread for device /dev/sci1
- 2015/02/28 10:36:39 76F046F8 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
- 2015/02/28 10:36:39 76F046F8 r (reader) v14 [videoguard2] Reader sci internal, detected box type: et8000
- 2015/02/28 10:36:39 76F046F8 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:41 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:44 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:47 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
- 2015/02/28 10:36:48 76F046F8 r (reader) v14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2015/02/28 10:36:48 76F046F8 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2015/02/28 10:36:48 76F046F8 r (reader) v14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
- 2015/02/28 10:36:48 76F046F8 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75135
- 2015/02/28 10:36:48 76F046F8 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [internal] Card type: P1TV
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [internal] Rom version: 20AA
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [internal] Credit available on card: 0 euro
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [internal] Extended 4C detected
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [internal] found card system videoguard2
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [videoguard2] card detected
- 2015/02/28 10:36:50 76F046F8 r (reader) v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
- 2015/02/28 10:36:50 58B980 c (dvbapi) Demuxer #0 no enabled matching ecmpids -> decoding is waiting for matching readers!
und die configs!
Oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10569
# Read more:
[reader]
label = HD+
description = hdplus02
protocol = internal
device = /dev/sci0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 540
cardmhz = 2700
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,3,10
[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
boxkey = 1122334455667788
ins7e11 = 15
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2
[reader]
label = ORF,MTV
description = OSEmu
protocol = cs357x
device = 127.0.0.1,12345
user = server
password = passwd
caid = 0D00,0D02,0D03,0D05,090F,0500,1801,0604
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[reader]
label = HD+
description = hdplus02
protocol = internal
device = /dev/sci0
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 540
cardmhz = 2700
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,3,10
[reader]
label = v14
description = V14-Sky
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
boxkey = 1122334455667788
ins7e11 = 15
detect = cd
mhz = 540
cardmhz = 2700
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2
[reader]
label = ORF,MTV
description = OSEmu
protocol = cs357x
device = 127.0.0.1,12345
user = server
password = passwd
caid = 0D00,0D02,0D03,0D05,090F,0500,1801,0604
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1
Oscam.config
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10507
# Read more:
[global]
logfile = /hdd/logs/oscam.log
disablemail = 0
bindwait = 20
maxlogsize = 500
preferlocalcards = 1
usrfile = /hdd/logs/oscamuser.log
mailfile = /hdd/logs/
emmlogdir = /hdd/logs/
[cache]
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
user = dvbapiau
boxtype = dreambox
[webif]
httpport = 8081
httpscript = /hdd/scripts/
httphelplang = de
httplocale = de_DE
httprefresh = 10
httppollrefresh = 10
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[global]
logfile = /hdd/logs/oscam.log
disablemail = 0
bindwait = 20
maxlogsize = 500
preferlocalcards = 1
usrfile = /hdd/logs/oscamuser.log
mailfile = /hdd/logs/
emmlogdir = /hdd/logs/
[cache]
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
request_mode = 1
user = dvbapiau
boxtype = dreambox
[webif]
httpport = 8081
httpscript = /hdd/scripts/
httphelplang = de
httplocale = de_DE
httprefresh = 10
httppollrefresh = 10
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
oscam.user
# oscam.user
[account]
user = dvbapiau
au = 1
betatunnel = 1833.FFFF:1702
group = 1
[account]
user = dvbapiau
au = 1
betatunnel = 1833.FFFF:1702
group = 1
Könnt ihr mir weiterhelfen?
Zuletzt bearbeitet: