@joinersteve: Starte oscam per Kommandozeile und poste die Fehler. Gehe von libssl libcryto aus.
@Bua1210: Welcher Fehler?? Warnungen kannst du ignorieren
@Token: Wie oben geschrieben. Wenn "stream source closed connection" im Log steht, dann war in e2 der Tuner nicht frei. Oder E2 hat aus irgendwelchen anderen Gründen die Verbindung geschlossen.
Anhänge
Du musst angemeldet sein, um die Anhangsliste zu sehen.
Hier alles im Grünen Bereich mit VU+Ultimo4K & mipsel Aktuelle svn.11715
Code:
+-------------------------------------------------------------------------------
| OSCam ver: 1.20_svn rev: 11715-798 target: armv7-vuultimo4k-linux-gnueabihf-ssl-libusb
| Tools:
| CROSS = /opt/s3/support/toolchains/vuultimo4k/bin/armv7-vuultimo4k-linux-gnueabihf-
| CC = /opt/s3/support/toolchains/vuultimo4k/bin/armv7-vuultimo4k-linux-gnueabihf-gcc
| Settings:
| CONF_DIR = /etc/tuxbox/config/oscam-emu/
| CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections -o nodeadcode
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -fexpensive-optimizations -mfpu=neon -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_UTF8=1 -DWITH_UTF8
| LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_LIBUSB=1 -DWITH_UTF8=1 -DWITH_UTF8
| LIBS = -lssl -lcrypto -lusb-1.0 -lrt -lm -lpthread -ldl
| UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_LIBUSB=1 USE_UTF8=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CS_CACHEEX_AIO CW_CYCLE_CHECK WITH_EMU
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL MP35 SMARGO STINGER SMART
| Compiler : armv7-vuultimo4k-linux-gnueabihf-gcc (GCC) 11.3.0
| Config : build/armv7-vuultimo4k-linux-gnueabihf-ssl-libusb/config.mak
| Binary : /opt/s3/support/binaries/oscam-svn11715-vuultimo4k-webif-dvbapi-ssl-libusb-emu798-upx
+-------------------------------------------------------------------------------
HOSTCC webif/pages_gen
GEN webif/pages.c
GEN Compressed 488608 template bytes into 184934 bytes. 303674 saved bytes (62.15%).
CC cscrypt/i_ecb.c
CC cscrypt/i_cbc.c
CC cscrypt/i_skey.c
CC cscrypt/rc6.c
CC cscrypt/fast_aes.c
CC cscrypt/md5.c
CC cscrypt/des.c
CC cscrypt/sha256.c
CC cscrypt/mdc2.c
CC csctapi/atr.c
CC csctapi/icc_async.c
CC csctapi/io_serial.c
CC csctapi/protocol_t0.c
CC csctapi/protocol_t1.c
CC csctapi/ifd_mp35.c
CC csctapi/ifd_phoenix.c
CC csctapi/ifd_sci.c
CC csctapi/ifd_smargo.c
CC csctapi/ifd_stinger.c
CC minilzo/minilzo.c
CC csctapi/ifd_smartreader.c
CC module-anticasc.c
CC module-cacheex.c
CC module-camd35-cacheex.c
CC module-camd35.c
CC module-cccam-cacheex.c
CC module-cccam.c
CC module-cccshare.c
CC module-constcw.c
CC module-emulator.c
CC module-emulator-osemu.c
CC module-emulator-streamserver.c
CC module-emulator-cryptoworks.c
CC module-emulator-biss.c
CC module-emulator-director.c
CC module-emulator-irdeto.c
CC module-emulator-nagravision.c
CC module-emulator-powervu.c
CC module-emulator-icam.c
CC module-emulator-viaccess.c
CC ffdecsa/ffdecsa.c
CC module-csp.c
CC module-cw-cycle-check.c
CC module-dvbapi-chancache.c
CC module-dvbapi.c
CC module-gbox-helper.c
CC module-gbox-sms.c
CC module-gbox-remm.c
CC module-gbox-cards.c
CC module-gbox.c
CC module-ird-guess.c
CC module-monitor.c
CC module-newcamd.c
CC module-newcamd-des.c
CC module-pandora.c
CC module-radegast.c
CC module-ghttp.c
CC module-scam.c
CC module-serial.c
CC module-stat.c
CC module-webif-lib.c
CC module-webif-tpl.c
CC module-webif.c
CC webif/pages.c
CC reader-common.c
CC reader-bulcrypt.c
CC reader-conax.c
CC reader-cryptoworks.c
CC reader-dgcrypt.c
CC reader-dre.c
CC reader-dre-cas.c
CC reader-dre-common.c
CC reader-dre-st20.c
CC reader-griffin.c
CC reader-irdeto.c
CC reader-nagra-common.c
CC reader-nagra.c
CC reader-nagracak7.c
CC reader-seca.c
CC reader-tongfang.c
CC reader-viaccess.c
CC reader-videoguard-common.c
CC reader-videoguard1.c
CC reader-videoguard12.c
CC reader-videoguard2.c
CC oscam-aes.c
CC oscam-array.c
CC oscam-hashtable.c
CC oscam-cache.c
CC oscam-chk.c
CC oscam-client.c
CC oscam-conf.c
CC oscam-conf-chk.c
CC oscam-conf-mk.c
CC oscam-config-account.c
CC oscam-config-global.c
CC oscam-config-reader.c
CC oscam-config.c
CC oscam-ecm.c
CC oscam-emm.c
CC oscam-emm-cache.c
CC oscam-failban.c
CC oscam-files.c
CC oscam-garbage.c
CC oscam-lock.c
CC oscam-log.c
CC oscam-log-reader.c
CC oscam-net.c
CC oscam-llist.c
CC oscam-simples.c
CC oscam-reader.c
CC oscam-string.c
CC oscam-time.c
CONF build/armv7-vuultimo4k-linux-gnueabihf-ssl-libusb/config.c
CC oscam-work.c
BUILD Distribution/list_smargo-1.20_svn11715-798-armv7-vuultimo4k-linux-gnueabihf-ssl-libusb
CC oscam.c
LINK /opt/s3/support/binaries/oscam-svn11715-vuultimo4k-webif-dvbapi-ssl-libusb-emu798-upx.debug
STRIP /opt/s3/support/binaries/oscam-svn11715-vuultimo4k-webif-dvbapi-ssl-libusb-emu798-upx
Code:
+-------------------------------------------------------------------------------
| OSCam ver: 1.20_svn rev: 11715-798 target: mipsel-unknown-linux-gnu-ssl
| Tools:
| CROSS = /opt/s3/support/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-
| CC = /opt/s3/support/toolchains/mipsoe20/bin/mipsel-unknown-linux-gnu-gcc
| Settings:
| CONF_DIR = /etc/tuxbox/config/oscam-emu/
| CC_OPTS = -O2 -ggdb -pipe -ffunction-sections -fdata-sections -o nodeadcode
| CC_WARN = -W -Wall -Wshadow -Wredundant-decls -Wstrict-prototypes -Wold-style-definition
| CFLAGS = -fexpensive-optimizations -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_UTF8=1 -DWITH_UTF8
| LDFLAGS = -Wl,--gc-sections -DWITH_SSL=1 -DWITH_LIBCRYPTO=1 -DWITH_UTF8=1 -DWITH_UTF8
| LIBS = -lssl -lcrypto -lm -lpthread -ldl
| UseFlags = USE_SSL=1 USE_LIBCRYPTO=1 USE_UTF8=1
| Config:
| Addons : WEBIF WEBIF_LIVELOG WEBIF_JQUERY TOUCH WITH_SSL HAVE_DVBAPI READ_SDT_CHARSETS IRDETO_GUESSING CS_ANTICASC WITH_DEBUG MODULE_MONITOR WITH_LB CS_CACHEEX CS_CACHEEX_AIO CW_CYCLE_CHECK WITH_EMU
| Protocols: CAMD35 CAMD35_TCP NEWCAMD CCCAM CCCSHARE GBOX RADEGAST SCAM SERIAL CONSTCW PANDORA GHTTP
| Readers : NAGRA NAGRA_MERLIN IRDETO CONAX CRYPTOWORKS SECA VIACCESS VIDEOGUARD DRE TONGFANG BULCRYPT GRIFFIN DGCRYPT
| CardRdrs : PHOENIX INTERNAL MP35
| Compiler : mipsel-unknown-linux-gnu-gcc (crosstool-NG 1.15.2) 4.6.3
| Config : build/mipsel-unknown-linux-gnu-ssl/config.mak
| Binary : /opt/s3/support/binaries/oscam-svn11715-mipsoe20-webif-dvbapi-ssl-emu798
+-------------------------------------------------------------------------------
HOSTCC webif/pages_gen
GEN webif/pages.c
GEN Compressed 488608 template bytes into 184934 bytes. 303674 saved bytes (62.15%).
CC cscrypt/i_cbc.c
CC cscrypt/i_ecb.c
CC cscrypt/i_skey.c
CC cscrypt/rc6.c
CC cscrypt/fast_aes.c
CC cscrypt/des.c
CC cscrypt/md5.c
CC cscrypt/sha256.c
CC cscrypt/mdc2.c
CC csctapi/atr.c
CC csctapi/icc_async.c
CC csctapi/io_serial.c
CC csctapi/protocol_t0.c
CC csctapi/protocol_t1.c
CC csctapi/ifd_mp35.c
CC csctapi/ifd_phoenix.c
CC csctapi/ifd_sci.c
CC minilzo/minilzo.c
CC module-anticasc.c
CC module-cacheex.c
CC module-camd35-cacheex.c
CC module-camd35.c
CC module-cccam-cacheex.c
CC module-cccam.c
CC module-cccshare.c
CC module-constcw.c
CC module-emulator.c
CC module-emulator-osemu.c
CC module-emulator-streamserver.c
CC module-emulator-cryptoworks.c
CC module-emulator-director.c
CC module-emulator-biss.c
CC module-emulator-irdeto.c
CC module-emulator-nagravision.c
CC module-emulator-powervu.c
CC module-emulator-icam.c
CC module-emulator-viaccess.c
CC ffdecsa/ffdecsa.c
CC module-csp.c
CC module-cw-cycle-check.c
CC module-dvbapi-chancache.c
CC module-dvbapi.c
CC module-gbox-helper.c
CC module-gbox-sms.c
CC module-gbox-remm.c
CC module-gbox-cards.c
CC module-gbox.c
CC module-ird-guess.c
CC module-monitor.c
CC module-newcamd.c
CC module-newcamd-des.c
CC module-pandora.c
CC module-ghttp.c
CC module-radegast.c
CC module-scam.c
CC module-serial.c
CC module-stat.c
CC module-webif-lib.c
CC module-webif-tpl.c
CC module-webif.c
CC webif/pages.c
CC reader-common.c
CC reader-bulcrypt.c
CC reader-conax.c
CC reader-cryptoworks.c
CC reader-dgcrypt.c
CC reader-dre.c
CC reader-dre-cas.c
CC reader-dre-common.c
CC reader-dre-st20.c
CC reader-griffin.c
CC reader-irdeto.c
CC reader-nagra-common.c
CC reader-nagra.c
CC reader-nagracak7.c
CC reader-seca.c
CC reader-tongfang.c
CC reader-viaccess.c
CC reader-videoguard-common.c
CC reader-videoguard1.c
CC reader-videoguard12.c
CC reader-videoguard2.c
CC oscam-aes.c
CC oscam-array.c
CC oscam-hashtable.c
CC oscam-cache.c
CC oscam-chk.c
CC oscam-client.c
CC oscam-conf.c
CC oscam-conf-chk.c
CC oscam-conf-mk.c
CC oscam-config-account.c
CC oscam-config-global.c
CC oscam-config-reader.c
CC oscam-config.c
CC oscam-ecm.c
CC oscam-emm.c
CC oscam-emm-cache.c
CC oscam-failban.c
CC oscam-files.c
CC oscam-garbage.c
CC oscam-lock.c
CC oscam-log.c
CC oscam-log-reader.c
CC oscam-net.c
CC oscam-llist.c
CC oscam-reader.c
CC oscam-simples.c
CC oscam-string.c
CC oscam-time.c
CC oscam-work.c
CC oscam.c
CONF build/mipsel-unknown-linux-gnu-ssl/config.c
LINK /opt/s3/support/binaries/oscam-svn11715-mipsoe20-webif-dvbapi-ssl-emu798.debug
STRIP /opt/s3/support/binaries/oscam-svn11715-mipsoe20-webif-dvbapi-ssl-emu798
Anhänge
Du musst angemeldet sein, um die Anhangsliste zu sehen.
@joinersteve: Starte oscam per Kommandozeile und poste die Fehler. Gehe von libssl libcryto aus.
@Bua1210: Welcher Fehler?? Warnungen kannst du ignorieren
@Token: Wie oben geschrieben. Wenn "stream source closed connection" im Log steht, dann war in e2 der Tuner nicht frei. Oder E2 hat aus irgendwelchen anderen Gründen die Verbindung geschlossen.
Hey so die Warnung ist ja nicht schlimm mit streamserver und rsa pvu aber binary wird nicht fertig gestellt wegen biss fehler am Schluss ! Lade dann hoch den fehler OK ! Trunk und patched dato das selbe mit mips arm sh4 toolchains ! Jetzt mache ich mich mal an Schimmel weiter ran Dank Speedy cool danke !
P s. Danke für die binary aber baue halt lieber selber meine bins so wie ich sie brauche und mag da meine nie das notwendigste haben nicht alles was keiner braucht also im Menü
Ja, 11711. Ist mir auch später aufgefallen. Das ist eben meine Entwicklungsumgebung und die will ich nicht immer updaten. Kostet nur Zeit und Arbeit und die Patches sind ja noch kompatibel. Deswegen wollte ich die Binaries auch nicht für alle bauen
Ja, 11711. Ist mir auch später aufgefallen. Das ist eben meine Entwicklungsumgebung und die will ich nicht immer updaten. Kostet nur Zeit und Arbeit und die Patches sind ja noch kompatibel. Deswegen wollte ich die Binaries auch nicht für alle bauen
Danke jetzt passt es eventuell hatte git was kommt ja ab und zu auch vor alles nochmals geladen und siehe da hat funktioniert bis auf die Warnungen aber gebaut hat sie jetzt ! Alles roger wieder ! Fs und paar war auch git kurz Off sowie bei Tuxbox kurz ! Auf alle Fälle OK jetzt